Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Roy Zang | 1483 | 91.37% | 3 | 11.54% |
Lennert Buytenhek | 58 | 3.57% | 1 | 3.85% |
Kumar Gala | 27 | 1.66% | 3 | 11.54% |
Josh Boyer | 19 | 1.17% | 2 | 7.69% |
Grant C. Likely | 9 | 0.55% | 3 | 11.54% |
Thomas Gleixner | 8 | 0.49% | 4 | 15.38% |
Nathan T. Lynch | 7 | 0.43% | 1 | 3.85% |
Michael Ellerman | 3 | 0.18% | 1 | 3.85% |
Harvey Harrison | 2 | 0.12% | 1 | 3.85% |
Roman Fietze | 1 | 0.06% | 1 | 3.85% |
Stephen Rothwell | 1 | 0.06% | 1 | 3.85% |
Rob Herring | 1 | 0.06% | 1 | 3.85% |
Krzysztof Kozlowski | 1 | 0.06% | 1 | 3.85% |
Linus Torvalds | 1 | 0.06% | 1 | 3.85% |
Jeremy Kerr | 1 | 0.06% | 1 | 3.85% |
Nicholas Piggin | 1 | 0.06% | 1 | 3.85% |
Total | 1623 | 26 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Common routines for Tundra Semiconductor TSI108 host bridge. * * 2004-2005 (c) Tundra Semiconductor Corp. * Author: Alex Bounine (alexandreb@tundra.com) * Author: Roy Zang (tie-fei.zang@freescale.com) * Add pci interrupt router host */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> #include <linux/uaccess.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/tsi108.h> #include <asm/tsi108_pci.h> #include <asm/tsi108_irq.h> #include <asm/prom.h> #undef DEBUG #ifdef DEBUG #define DBG(x...) printk(x) #else #define DBG(x...) #endif #define tsi_mk_config_addr(bus, devfunc, offset) \ ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) u32 tsi108_pci_cfg_base; static u32 tsi108_pci_cfg_phys; u32 tsi108_csr_vir_base; static struct irq_domain *pci_irq_host; extern u32 get_vir_csrbase(void); extern u32 tsi108_read_reg(u32 reg_offset); extern void tsi108_write_reg(u32 reg_offset, u32 val); int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, int offset, int len, u32 val) { volatile unsigned char *cfg_addr; struct pci_controller *hose = pci_bus_to_host(bus); if (ppc_md.pci_exclude_device) if (ppc_md.pci_exclude_device(hose, bus->number, devfunc)) return PCIBIOS_DEVICE_NOT_FOUND; cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, devfunc, offset) | (offset & 0x03)); #ifdef DEBUG printk("PCI CFG write : "); printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); printk("data = 0x%08x\n", val); #endif switch (len) { case 1: out_8((u8 *) cfg_addr, val); break; case 2: out_le16((u16 *) cfg_addr, val); break; default: out_le32((u32 *) cfg_addr, val); break; } return PCIBIOS_SUCCESSFUL; } void tsi108_clear_pci_error(u32 pci_cfg_base) { u32 err_stat, err_addr, pci_stat; /* * Quietly clear PB and PCI error flags set as result * of PCI/X configuration read requests. */ /* Read PB Error Log Registers */ err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); if (err_stat & TSI108_PB_ERRCS_ES) { /* Clear error flag */ tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, TSI108_PB_ERRCS_ES); /* Clear read error reported in PB_ISR */ tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, TSI108_PB_ISR_PBS_RD_ERR); /* Clear PCI/X bus cfg errors if applicable */ if ((err_addr & 0xFF000000) == pci_cfg_base) { pci_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, pci_stat); } } return; } #define __tsi108_read_pci_config(x, addr, op) \ __asm__ __volatile__( \ " "op" %0,0,%1\n" \ "1: eieio\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3: li %0,-1\n" \ " b 2b\n" \ ".previous\n" \ EX_TABLE(1b, 3b) \ : "=r"(x) : "r"(addr)) int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 * val) { volatile unsigned char *cfg_addr; struct pci_controller *hose = pci_bus_to_host(bus); u32 temp; if (ppc_md.pci_exclude_device) if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) return PCIBIOS_DEVICE_NOT_FOUND; cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, devfn, offset) | (offset & 0x03)); switch (len) { case 1: __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); break; case 2: __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); break; default: __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); break; } *val = temp; #ifdef DEBUG if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { printk("PCI CFG read : "); printk("%d:0x%x:0x%x ", bus->number, devfn, offset); printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); printk("data = 0x%x\n", *val); } #endif return PCIBIOS_SUCCESSFUL; } void tsi108_clear_pci_cfg_error(void) { tsi108_clear_pci_error(tsi108_pci_cfg_phys); } static struct pci_ops tsi108_direct_pci_ops = { .read = tsi108_direct_read_config, .write = tsi108_direct_write_config, }; int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) { int len; struct pci_controller *hose; struct resource rsrc; const int *bus_range; int has_address = 0; /* PCI Config mapping */ tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE); tsi108_pci_cfg_phys = cfg_phys; DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__, tsi108_pci_cfg_base); /* Fetch host bridge registers address */ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %pOF, assume" " bus 0\n", dev); } hose = pcibios_alloc_controller(dev); if (!hose) { printk("PCI Host bridge init failed\n"); return -ENOMEM; } hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; (hose)->ops = &tsi108_direct_pci_ops; printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ pci_process_bridge_OF_ranges(hose, dev, primary); return 0; } /* * Low level utility functions */ static void tsi108_pci_int_mask(u_int irq) { u_int irp_cfg; int int_line = (irq - IRQ_PCI_INTAD_BASE); irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); mb(); irp_cfg |= (1 << int_line); /* INTx_DIR = output */ irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); mb(); irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); } static void tsi108_pci_int_unmask(u_int irq) { u_int irp_cfg; int int_line = (irq - IRQ_PCI_INTAD_BASE); irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); mb(); irp_cfg &= ~(1 << int_line); irp_cfg |= (3 << (8 + (int_line * 2))); tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); mb(); } static void init_pci_source(void) { tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, 0x0000ff00); tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, TSI108_PCI_IRP_ENABLE_P_INT); mb(); } static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; int i; u_int pci_irp_stat; static int mask = 0; /* Read PCI/X block interrupt status register */ pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); mb(); if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { /* Process Interrupt from PCI bus INTA# - INTD# lines */ temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD) & 0xf; mb(); for (i = 0; i < 4; i++, mask++) { if (temp & (1 << mask % 4)) { irq = IRQ_PCI_INTA + mask % 4; mask++; break; } } /* Disable interrupts from PCI block */ temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, temp & ~TSI108_PCI_IRP_ENABLE_P_INT); mb(); (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); mb(); } #ifdef DEBUG else { printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); mb(); printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); mb(); printk("cfg_ctl=0x%08x ", temp); temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); mb(); printk("irp_enable=0x%08x\n", temp); } #endif /* end of DEBUG */ return irq; } /* * Linux descriptor level callbacks */ static void tsi108_pci_irq_unmask(struct irq_data *d) { tsi108_pci_int_unmask(d->irq); /* Enable interrupts from PCI block */ tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE) | TSI108_PCI_IRP_ENABLE_P_INT); mb(); } static void tsi108_pci_irq_mask(struct irq_data *d) { tsi108_pci_int_mask(d->irq); } static void tsi108_pci_irq_ack(struct irq_data *d) { tsi108_pci_int_mask(d->irq); } /* * Interrupt controller descriptor for cascaded PCI interrupt controller. */ static struct irq_chip tsi108_pci_irq = { .name = "tsi108_PCI_int", .irq_mask = tsi108_pci_irq_mask, .irq_ack = tsi108_pci_irq_ack, .irq_unmask = tsi108_pci_irq_unmask, }; static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct, const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { *out_hwirq = intspec[0]; *out_flags = IRQ_TYPE_LEVEL_HIGH; return 0; } static int pci_irq_host_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { unsigned int irq; DBG("%s(%d, 0x%lx)\n", __func__, virq, hw); if ((virq >= 1) && (virq <= 4)){ irq = virq + IRQ_PCI_INTAD_BASE - 1; irq_set_status_flags(irq, IRQ_LEVEL); irq_set_chip(irq, &tsi108_pci_irq); } return 0; } static const struct irq_domain_ops pci_irq_domain_ops = { .map = pci_irq_host_map, .xlate = pci_irq_host_xlate, }; /* * Exported functions */ /* * The Tsi108 PCI interrupts initialization routine. * * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the * PCI block has to be treated as a cascaded interrupt controller connected * to the MPIC. */ void __init tsi108_pci_int_init(struct device_node *node) { DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL); if (pci_irq_host == NULL) { printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n"); return; } init_pci_source(); } void tsi108_irq_cascade(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int cascade_irq = get_pci_source(); if (cascade_irq) generic_handle_irq(cascade_irq); chip->irq_eoi(&desc->irq_data); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1