Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
David S. Miller | 1177 | 61.72% | 5 | 13.89% |
Prasanna S. Panchamukhi | 317 | 16.62% | 7 | 19.44% |
Ananth N. Mavinakayanahalli | 230 | 12.06% | 4 | 11.11% |
Rusty Lynch | 75 | 3.93% | 2 | 5.56% |
Anil S Keshavamurthy | 23 | 1.21% | 3 | 8.33% |
Masami Hiramatsu | 22 | 1.15% | 3 | 8.33% |
Kirill V Tkhai | 20 | 1.05% | 1 | 2.78% |
Bibo Mao | 16 | 0.84% | 1 | 2.78% |
Srinivasa D S | 9 | 0.47% | 1 | 2.78% |
Christoph Lameter | 6 | 0.31% | 1 | 2.78% |
Sam Ravnborg | 3 | 0.16% | 1 | 2.78% |
Tejun Heo | 3 | 0.16% | 1 | 2.78% |
Frederik Schwarzer | 1 | 0.05% | 1 | 2.78% |
Paul Gortmaker | 1 | 0.05% | 1 | 2.78% |
Greg Kroah-Hartman | 1 | 0.05% | 1 | 2.78% |
Christoph Hellwig | 1 | 0.05% | 1 | 2.78% |
Linus Torvalds | 1 | 0.05% | 1 | 2.78% |
Anoop Thomas Mathew | 1 | 0.05% | 1 | 2.78% |
Total | 1907 | 36 |
// SPDX-License-Identifier: GPL-2.0 /* arch/sparc64/kernel/kprobes.c * * Copyright (C) 2004 David S. Miller <davem@davemloft.net> */ #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/extable.h> #include <linux/kdebug.h> #include <linux/slab.h> #include <linux/context_tracking.h> #include <asm/signal.h> #include <asm/cacheflush.h> #include <linux/uaccess.h> /* We do not have hardware single-stepping on sparc64. * So we implement software single-stepping with breakpoint * traps. The top-level scheme is similar to that used * in the x86 kprobes implementation. * * In the kprobe->ainsn.insn[] array we store the original * instruction at index zero and a break instruction at * index one. * * When we hit a kprobe we: * - Run the pre-handler * - Remember "regs->tnpc" and interrupt level stored in * "regs->tstate" so we can restore them later * - Disable PIL interrupts * - Set regs->tpc to point to kprobe->ainsn.insn[0] * - Set regs->tnpc to point to kprobe->ainsn.insn[1] * - Mark that we are actively in a kprobe * * At this point we wait for the second breakpoint at * kprobe->ainsn.insn[1] to hit. When it does we: * - Run the post-handler * - Set regs->tpc to "remembered" regs->tnpc stored above, * restore the PIL interrupt level in "regs->tstate" as well * - Make any adjustments necessary to regs->tnpc in order * to handle relative branches correctly. See below. * - Mark that we are no longer actively in a kprobe. */ DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); struct kretprobe_blackpoint kretprobe_blacklist[] = {{NULL, NULL}}; int __kprobes arch_prepare_kprobe(struct kprobe *p) { if ((unsigned long) p->addr & 0x3UL) return -EILSEQ; p->ainsn.insn[0] = *p->addr; flushi(&p->ainsn.insn[0]); p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2; flushi(&p->ainsn.insn[1]); p->opcode = *p->addr; return 0; } void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flushi(p->addr); } void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flushi(p->addr); } static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); kcb->prev_kprobe.status = kcb->kprobe_status; kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc; kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); kcb->kprobe_status = kcb->prev_kprobe.status; kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc; kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { __this_cpu_write(current_kprobe, p); kcb->kprobe_orig_tnpc = regs->tnpc; kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ if (p->opcode == BREAKPOINT_INSTRUCTION) { regs->tpc = (unsigned long) p->addr; regs->tnpc = kcb->kprobe_orig_tnpc; } else { regs->tpc = (unsigned long) &p->ainsn.insn[0]; regs->tnpc = (unsigned long) &p->ainsn.insn[1]; } } static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; struct kprobe_ctlblk *kcb; /* * We don't want to be preempted for the entire * duration of kprobe processing */ preempt_disable(); kcb = get_kprobe_ctlblk(); if (kprobe_running()) { p = get_kprobe(addr); if (p) { if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | kcb->kprobe_orig_tstate_pil); goto no_kprobe; } /* We have reentered the kprobe_handler(), since * another probe was hit while within the handler. * We here save the original kprobes variables and * just single step on the instruction of the new probe * without calling any user handlers. */ save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); kprobes_inc_nmissed_count(p); kcb->kprobe_status = KPROBE_REENTER; prepare_singlestep(p, regs, kcb); return 1; } else if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* The breakpoint instruction was removed by * another cpu right after we hit, no further * handling of this interrupt is appropriate */ ret = 1; } goto no_kprobe; } p = get_kprobe(addr); if (!p) { if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right * after we hit it. Another cpu has removed * either a probepoint or a debugger breakpoint * at this address. In either case, no further * handling of this interrupt is appropriate. */ ret = 1; } /* Not one of ours: let kernel handle it */ goto no_kprobe; } set_current_kprobe(p, regs, kcb); kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) { reset_current_kprobe(); preempt_enable_no_resched(); return 1; } prepare_singlestep(p, regs, kcb); kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: preempt_enable_no_resched(); return ret; } /* If INSN is a relative control transfer instruction, * return the corrected branch destination value. * * regs->tpc and regs->tnpc still hold the values of the * program counters at the time of trap due to the execution * of the BREAKPOINT_INSTRUCTION_2 at p->ainsn.insn[1] * */ static unsigned long __kprobes relbranch_fixup(u32 insn, struct kprobe *p, struct pt_regs *regs) { unsigned long real_pc = (unsigned long) p->addr; /* Branch not taken, no mods necessary. */ if (regs->tnpc == regs->tpc + 0x4UL) return real_pc + 0x8UL; /* The three cases are call, branch w/prediction, * and traditional branch. */ if ((insn & 0xc0000000) == 0x40000000 || (insn & 0xc1c00000) == 0x00400000 || (insn & 0xc1c00000) == 0x00800000) { unsigned long ainsn_addr; ainsn_addr = (unsigned long) &p->ainsn.insn[0]; /* The instruction did all the work for us * already, just apply the offset to the correct * instruction location. */ return (real_pc + (regs->tnpc - ainsn_addr)); } /* It is jmpl or some other absolute PC modification instruction, * leave NPC as-is. */ return regs->tnpc; } /* If INSN is an instruction which writes it's PC location * into a destination register, fix that up. */ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, unsigned long real_pc) { unsigned long *slot = NULL; /* Simplest case is 'call', which always uses %o7 */ if ((insn & 0xc0000000) == 0x40000000) { slot = ®s->u_regs[UREG_I7]; } /* 'jmpl' encodes the register inside of the opcode */ if ((insn & 0xc1f80000) == 0x81c00000) { unsigned long rd = ((insn >> 25) & 0x1f); if (rd <= 15) { slot = ®s->u_regs[rd]; } else { /* Hard case, it goes onto the stack. */ flushw_all(); rd -= 16; slot = (unsigned long *) (regs->u_regs[UREG_FP] + STACK_BIAS); slot += rd; } } if (slot != NULL) *slot = real_pc; } /* * Called after single-stepping. p->addr is the address of the * instruction which has been replaced by the breakpoint * instruction. To avoid the SMP problems that can occur when we * temporarily put back the original opcode to single-step, we * single-stepped a copy of the instruction. The address of this * copy is &p->ainsn.insn[0]. * * This function prepares to return from the post-single-step * breakpoint trap. */ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { u32 insn = p->ainsn.insn[0]; regs->tnpc = relbranch_fixup(insn, p, regs); /* This assignment must occur after relbranch_fixup() */ regs->tpc = kcb->kprobe_orig_tnpc; retpc_fixup(regs, insn, (unsigned long) p->addr); regs->tstate = ((regs->tstate & ~TSTATE_PIL) | kcb->kprobe_orig_tstate_pil); } static int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (!cur) return 0; if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { kcb->kprobe_status = KPROBE_HIT_SSDONE; cur->post_handler(cur, regs, 0); } resume_execution(cur, regs, kcb); /*Restore back the original saved kprobes variables and continue. */ if (kcb->kprobe_status == KPROBE_REENTER) { restore_previous_kprobe(kcb); goto out; } reset_current_kprobe(); out: preempt_enable_no_resched(); return 1; } int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); const struct exception_table_entry *entry; switch(kcb->kprobe_status) { case KPROBE_HIT_SS: case KPROBE_REENTER: /* * We are here because the instruction being single * stepped caused a page fault. We reset the current * kprobe and the tpc points back to the probe address * and allow the page fault handler to continue as a * normal page fault. */ regs->tpc = (unsigned long)cur->addr; regs->tnpc = kcb->kprobe_orig_tnpc; regs->tstate = ((regs->tstate & ~TSTATE_PIL) | kcb->kprobe_orig_tstate_pil); if (kcb->kprobe_status == KPROBE_REENTER) restore_previous_kprobe(kcb); else reset_current_kprobe(); preempt_enable_no_resched(); break; case KPROBE_HIT_ACTIVE: case KPROBE_HIT_SSDONE: /* * We increment the nmissed count for accounting, * we can also use npre/npostfault count for accounting * these specific fault cases. */ kprobes_inc_nmissed_count(cur); /* * We come here because instructions in the pre/post * handler caused the page_fault, this could happen * if handler tries to access user space by * copy_from_user(), get_user() etc. Let the * user-specified handler try to fix it first. */ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; /* * In case the user-specified fault handler returned * zero, try to fix up. */ entry = search_exception_tables(regs->tpc); if (entry) { regs->tpc = entry->fixup; regs->tnpc = regs->tpc + 4; return 1; } /* * fixup_exception() could not handle it, * Let do_page_fault() fix it. */ break; default: break; } return 0; } /* * Wrapper routine to for handling exceptions. */ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; if (args->regs && user_mode(args->regs)) return ret; switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) ret = NOTIFY_STOP; break; case DIE_DEBUG_2: if (post_kprobe_handler(args->regs)) ret = NOTIFY_STOP; break; default: break; } return ret; } asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, struct pt_regs *regs) { enum ctx_state prev_state = exception_enter(); BUG_ON(trap_level != 0x170 && trap_level != 0x171); if (user_mode(regs)) { local_irq_enable(); bad_trap(regs, trap_level); goto out; } /* trap_level == 0x170 --> ta 0x70 * trap_level == 0x171 --> ta 0x71 */ if (notify_die((trap_level == 0x170) ? DIE_DEBUG : DIE_DEBUG_2, (trap_level == 0x170) ? "debug" : "debug_2", regs, 0, trap_level, SIGTRAP) != NOTIFY_STOP) bad_trap(regs, trap_level); out: exception_exit(prev_state); } /* The value stored in the return address register is actually 2 * instructions before where the callee will return to. * Sequences usually look something like this * * call some_function <--- return register points here * nop <--- call delay slot * whatever <--- where callee returns to * * To keep trampoline_probe_handler logic simpler, we normalize the * value kept in ri->ret_addr so we don't need to keep adjusting it * back and forth. */ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) { ri->ret_addr = (kprobe_opcode_t *)(regs->u_regs[UREG_RETPC] + 8); /* Replace the return addr with trampoline addr */ regs->u_regs[UREG_RETPC] = ((unsigned long)kretprobe_trampoline) - 8; } /* * Called when the probe at kretprobe trampoline is hit */ static int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head, empty_rp; struct hlist_node *tmp; unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; INIT_HLIST_HEAD(&empty_rp); kretprobe_hash_lock(current, &head, &flags); /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: * - instances are always inserted at the head of the list * - when multiple return probes are registered for the same * function, the first instance's ret_addr will point to the * real return address, and all the rest will point to * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, tmp, head, hlist) { if (ri->task != current) /* another task is sharing our hash bucket */ continue; if (ri->rp && ri->rp->handler) ri->rp->handler(ri, regs); orig_ret_address = (unsigned long)ri->ret_addr; recycle_rp_inst(ri, &empty_rp); if (orig_ret_address != trampoline_address) /* * This is the real return address. Any other * instances associated with this task are for * other calls deeper on the call stack */ break; } kretprobe_assert(ri, orig_ret_address, trampoline_address); regs->tpc = orig_ret_address; regs->tnpc = orig_ret_address + 4; kretprobe_hash_unlock(current, &flags); hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); kfree(ri); } /* * By returning a non-zero value, we are telling * kprobe_handler() that we don't want the post_handler * to run (and have re-enabled preemption) */ return 1; } static void __used kretprobe_trampoline_holder(void) { asm volatile(".global kretprobe_trampoline\n" "kretprobe_trampoline:\n" "\tnop\n" "\tnop\n"); } static struct kprobe trampoline_p = { .addr = (kprobe_opcode_t *) &kretprobe_trampoline, .pre_handler = trampoline_probe_handler }; int __init arch_init_kprobes(void) { return register_kprobe(&trampoline_p); } int __kprobes arch_trampoline_kprobe(struct kprobe *p) { if (p->addr == (kprobe_opcode_t *)&kretprobe_trampoline) return 1; return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1