| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Matti Vaittinen | 5429 | 99.34% | 11 | 57.89% |
| Axel Lin | 35 | 0.64% | 7 | 36.84% |
| Geert Uytterhoeven | 1 | 0.02% | 1 | 5.26% |
| Total | 5465 | 19 |
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295
// SPDX-License-Identifier: GPL-2.0 // Copyright (C) 2018 ROHM Semiconductors // bd71837-regulator.c ROHM BD71837MWV/BD71847MWV regulator driver #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/rohm-bd718x7.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> #include <linux/slab.h> /* * BUCK1/2/3/4 * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting * 00: 10.00mV/usec 10mV 1uS * 01: 5.00mV/usec 10mV 2uS * 10: 2.50mV/usec 10mV 4uS * 11: 1.25mV/usec 10mV 8uS */ static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { int id = rdev_get_id(rdev); unsigned int ramp_value; dev_dbg(&rdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1, ramp_delay); switch (ramp_delay) { case 1 ... 1250: ramp_value = BUCK_RAMPRATE_1P25MV; break; case 1251 ... 2500: ramp_value = BUCK_RAMPRATE_2P50MV; break; case 2501 ... 5000: ramp_value = BUCK_RAMPRATE_5P00MV; break; case 5001 ... 10000: ramp_value = BUCK_RAMPRATE_10P00MV; break; default: ramp_value = BUCK_RAMPRATE_10P00MV; dev_err(&rdev->dev, "%s: ramp_delay: %d not supported, setting 10000mV//us\n", rdev->desc->name, ramp_delay); } return regmap_update_bits(rdev->regmap, BD718XX_REG_BUCK1_CTRL + id, BUCK_RAMPRATE_MASK, ramp_value << 6); } /* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed. * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage * is changed. Hence we return -EBUSY for these if voltage is changed * when BUCK/LDO is enabled. */ static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev, unsigned int sel) { if (regulator_is_enabled_regmap(rdev)) return -EBUSY; return regulator_set_voltage_sel_regmap(rdev, sel); } static int bd718xx_set_voltage_sel_pickable_restricted( struct regulator_dev *rdev, unsigned int sel) { if (regulator_is_enabled_regmap(rdev)) return -EBUSY; return regulator_set_voltage_sel_pickable_regmap(rdev, sel); } static const struct regulator_ops bd718xx_pickable_range_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_pickable_linear_range, .set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted, .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, }; static const struct regulator_ops bd718xx_pickable_range_buck_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_pickable_linear_range, .set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted, .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, }; static const struct regulator_ops bd718xx_ldo_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear_range, .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, }; static const struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_table, .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, }; static const struct regulator_ops bd718xx_buck_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear_range, .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, }; static const struct regulator_ops bd718xx_buck_regulator_nolinear_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, }; static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear_range, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = bd718xx_buck1234_set_ramp_delay, }; /* * BD71837 BUCK1/2/3/4 * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) */ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), }; /* * BD71837 BUCK5 * 0.7V to 1.35V (range 0) * and * 0.675 to 1.325 (range 1) */ static const struct regulator_linear_range bd71837_buck5_volts[] = { /* Ranges when VOLT_SEL bit is 0 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000), /* Ranges when VOLT_SEL bit is 1 */ REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000), REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000), REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000), }; /* * Range selector for first 3 linear ranges is 0x0 * and 0x1 for last 3 ranges. */ static const unsigned int bd71837_buck5_volt_range_sel[] = { 0x0, 0x0, 0x0, 0x80, 0x80, 0x80 }; /* * BD71847 BUCK3 */ static const struct regulator_linear_range bd71847_buck3_volts[] = { /* Ranges when VOLT_SEL bits are 00 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000), /* Ranges when VOLT_SEL bits are 01 */ REGULATOR_LINEAR_RANGE(550000, 0x0, 0x7, 50000), /* Ranges when VOLT_SEL bits are 11 */ REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000), REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000), REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000), }; static const unsigned int bd71847_buck3_volt_range_sel[] = { 0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80 }; static const struct regulator_linear_range bd71847_buck4_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000), }; static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 }; /* * BUCK6 * 3.0V to 3.3V (step 100mV) */ static const struct regulator_linear_range bd71837_buck6_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), }; /* * BD71837 BUCK7 * BD71847 BUCK5 * 000 = 1.605V * 001 = 1.695V * 010 = 1.755V * 011 = 1.8V (Initial) * 100 = 1.845V * 101 = 1.905V * 110 = 1.95V * 111 = 1.995V */ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = { 1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000 }; /* * BUCK8 * 0.8V to 1.40V (step 10mV) */ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), }; /* * LDO1 * 3.0 to 3.3V (100mV step) */ static const struct regulator_linear_range bd718xx_ldo1_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), }; static const unsigned int bd718xx_ldo1_volt_range_sel[] = { 0x0, 0x20 }; /* * LDO2 * 0.8 or 0.9V */ static const unsigned int ldo_2_volts[] = { 900000, 800000 }; /* * LDO3 * 1.8 to 3.3V (100mV step) */ static const struct regulator_linear_range bd718xx_ldo3_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; /* * LDO4 * 0.9 to 1.8V (100mV step) */ static const struct regulator_linear_range bd718xx_ldo4_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; /* * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ static const struct regulator_linear_range bd71837_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; /* * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ static const struct regulator_linear_range bd71847_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000), }; static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 }; /* * LDO6 * 0.9 to 1.8V (100mV step) */ static const struct regulator_linear_range bd718xx_ldo6_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; /* * LDO7 * 1.8 to 3.3V (100mV step) */ static const struct regulator_linear_range bd71837_ldo7_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; struct reg_init { unsigned int reg; unsigned int mask; unsigned int val; }; struct bd718xx_regulator_data { struct regulator_desc desc; const struct reg_init init; const struct reg_init *additional_inits; int additional_init_amnt; }; /* * There is a HW quirk in BD71837. The shutdown sequence timings for * bucks/LDOs which are controlled via register interface are changed. * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the * beginning of shut-down sequence. As bucks 6 and 7 are parent * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage * monitoring to errorneously detect under voltage and force PMIC to * emergency state instead of poweroff. In order to avoid this we * disable voltage monitoring for LDO5 and LDO6 */ static const struct reg_init bd71837_ldo5_inits[] = { { .reg = BD718XX_REG_MVRFLTMASK2, .mask = BD718XX_LDO5_VRMON80, .val = BD718XX_LDO5_VRMON80, }, }; static const struct reg_init bd71837_ldo6_inits[] = { { .reg = BD718XX_REG_MVRFLTMASK2, .mask = BD718XX_LDO6_VRMON80, .val = BD718XX_LDO6_VRMON80, }, }; #define NUM_DVS_BUCKS 4 struct of_dvs_setting { const char *prop; unsigned int reg; }; static int set_dvs_levels(const struct of_dvs_setting *dvs, struct device_node *np, const struct regulator_desc *desc, struct regmap *regmap) { int ret, i; unsigned int uv; ret = of_property_read_u32(np, dvs->prop, &uv); if (ret) { if (ret != -EINVAL) return ret; return 0; } for (i = 0; i < desc->n_voltages; i++) { ret = regulator_desc_list_voltage_linear_range(desc, i); if (ret < 0) continue; if (ret == uv) { i <<= ffs(desc->vsel_mask) - 1; ret = regmap_update_bits(regmap, dvs->reg, DVS_BUCK_RUN_MASK, i); break; } } return ret; } static int buck4_set_hw_dvs_levels(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *cfg) { int ret, i; const struct of_dvs_setting dvs[] = { { .prop = "rohm,dvs-run-voltage", .reg = BD71837_REG_BUCK4_VOLT_RUN, }, }; for (i = 0; i < ARRAY_SIZE(dvs); i++) { ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap); if (ret) break; } return ret; } static int buck3_set_hw_dvs_levels(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *cfg) { int ret, i; const struct of_dvs_setting dvs[] = { { .prop = "rohm,dvs-run-voltage", .reg = BD71837_REG_BUCK3_VOLT_RUN, }, }; for (i = 0; i < ARRAY_SIZE(dvs); i++) { ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap); if (ret) break; } return ret; } static int buck2_set_hw_dvs_levels(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *cfg) { int ret, i; const struct of_dvs_setting dvs[] = { { .prop = "rohm,dvs-run-voltage", .reg = BD718XX_REG_BUCK2_VOLT_RUN, }, { .prop = "rohm,dvs-idle-voltage", .reg = BD718XX_REG_BUCK2_VOLT_IDLE, }, }; for (i = 0; i < ARRAY_SIZE(dvs); i++) { ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap); if (ret) break; } return ret; } static int buck1_set_hw_dvs_levels(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *cfg) { int ret, i; const struct of_dvs_setting dvs[] = { { .prop = "rohm,dvs-run-voltage", .reg = BD718XX_REG_BUCK1_VOLT_RUN, }, { .prop = "rohm,dvs-idle-voltage", .reg = BD718XX_REG_BUCK1_VOLT_IDLE, }, { .prop = "rohm,dvs-suspend-voltage", .reg = BD718XX_REG_BUCK1_VOLT_SUSP, }, }; for (i = 0; i < ARRAY_SIZE(dvs); i++) { ret = set_dvs_levels(&dvs[i], np, desc, cfg->regmap); if (ret) break; } return ret; } static const struct bd718xx_regulator_data bd71847_regulators[] = { { .desc = { .name = "buck1", .of_match = of_match_ptr("BUCK1"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK1, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD718XX_REG_BUCK1_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck1_set_hw_dvs_levels, }, .init = { .reg = BD718XX_REG_BUCK1_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck2", .of_match = of_match_ptr("BUCK2"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK2, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD718XX_REG_BUCK2_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck2_set_hw_dvs_levels, }, .init = { .reg = BD718XX_REG_BUCK2_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck3", .of_match = of_match_ptr("BUCK3"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK3, .ops = &bd718xx_pickable_range_buck_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71847_BUCK3_VOLTAGE_NUM, .linear_ranges = bd71847_buck3_volts, .n_linear_ranges = ARRAY_SIZE(bd71847_buck3_volts), .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, .vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK, .vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, .vsel_range_mask = BD71847_BUCK3_RANGE_MASK, .linear_range_selectors = bd71847_buck3_volt_range_sel, .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck4", .of_match = of_match_ptr("BUCK4"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK4, .ops = &bd718xx_pickable_range_buck_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71847_BUCK4_VOLTAGE_NUM, .linear_ranges = bd71847_buck4_volts, .n_linear_ranges = ARRAY_SIZE(bd71847_buck4_volts), .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT, .vsel_mask = BD71847_BUCK4_MASK, .vsel_range_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT, .vsel_range_mask = BD71847_BUCK4_RANGE_MASK, .linear_range_selectors = bd71847_buck4_volt_range_sel, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck5", .of_match = of_match_ptr("BUCK5"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK5, .ops = &bd718xx_buck_regulator_nolinear_ops, .type = REGULATOR_VOLTAGE, .volt_table = &bd718xx_3rd_nodvs_buck_volts[0], .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts), .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT, .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK, .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck6", .of_match = of_match_ptr("BUCK6"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK6, .ops = &bd718xx_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_4th_nodvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts), .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT, .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK, .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "ldo1", .of_match = of_match_ptr("LDO1"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO1, .ops = &bd718xx_pickable_range_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO1_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo1_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts), .vsel_reg = BD718XX_REG_LDO1_VOLT, .vsel_mask = BD718XX_LDO1_MASK, .vsel_range_reg = BD718XX_REG_LDO1_VOLT, .vsel_range_mask = BD718XX_LDO1_RANGE_MASK, .linear_range_selectors = bd718xx_ldo1_volt_range_sel, .enable_reg = BD718XX_REG_LDO1_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO1_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo2", .of_match = of_match_ptr("LDO2"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO2, .ops = &bd718xx_ldo_regulator_nolinear_ops, .type = REGULATOR_VOLTAGE, .volt_table = &ldo_2_volts[0], .vsel_reg = BD718XX_REG_LDO2_VOLT, .vsel_mask = BD718XX_LDO2_MASK, .n_voltages = ARRAY_SIZE(ldo_2_volts), .enable_reg = BD718XX_REG_LDO2_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO2_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo3", .of_match = of_match_ptr("LDO3"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO3, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO3_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo3_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts), .vsel_reg = BD718XX_REG_LDO3_VOLT, .vsel_mask = BD718XX_LDO3_MASK, .enable_reg = BD718XX_REG_LDO3_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO3_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo4", .of_match = of_match_ptr("LDO4"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO4, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO4_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo4_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts), .vsel_reg = BD718XX_REG_LDO4_VOLT, .vsel_mask = BD718XX_LDO4_MASK, .enable_reg = BD718XX_REG_LDO4_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO4_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo5", .of_match = of_match_ptr("LDO5"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO5, .ops = &bd718xx_pickable_range_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71847_LDO5_VOLTAGE_NUM, .linear_ranges = bd71847_ldo5_volts, .n_linear_ranges = ARRAY_SIZE(bd71847_ldo5_volts), .vsel_reg = BD718XX_REG_LDO5_VOLT, .vsel_mask = BD71847_LDO5_MASK, .vsel_range_reg = BD718XX_REG_LDO5_VOLT, .vsel_range_mask = BD71847_LDO5_RANGE_MASK, .linear_range_selectors = bd71847_ldo5_volt_range_sel, .enable_reg = BD718XX_REG_LDO5_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO5_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo6", .of_match = of_match_ptr("LDO6"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO6, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO6_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo6_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts), /* LDO6 is supplied by buck5 */ .supply_name = "buck5", .vsel_reg = BD718XX_REG_LDO6_VOLT, .vsel_mask = BD718XX_LDO6_MASK, .enable_reg = BD718XX_REG_LDO6_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO6_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, }; static const struct bd718xx_regulator_data bd71837_regulators[] = { { .desc = { .name = "buck1", .of_match = of_match_ptr("BUCK1"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK1, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD718XX_REG_BUCK1_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck1_set_hw_dvs_levels, }, .init = { .reg = BD718XX_REG_BUCK1_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck2", .of_match = of_match_ptr("BUCK2"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK2, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD718XX_REG_BUCK2_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck2_set_hw_dvs_levels, }, .init = { .reg = BD718XX_REG_BUCK2_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck3", .of_match = of_match_ptr("BUCK3"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK3, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD71837_REG_BUCK3_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck3_set_hw_dvs_levels, }, .init = { .reg = BD71837_REG_BUCK3_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck4", .of_match = of_match_ptr("BUCK4"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK4, .ops = &bd718xx_dvs_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_dvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN, .vsel_mask = DVS_BUCK_RUN_MASK, .enable_reg = BD71837_REG_BUCK4_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, .of_parse_cb = buck4_set_hw_dvs_levels, }, .init = { .reg = BD71837_REG_BUCK4_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck5", .of_match = of_match_ptr("BUCK5"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK5, .ops = &bd718xx_pickable_range_buck_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71837_BUCK5_VOLTAGE_NUM, .linear_ranges = bd71837_buck5_volts, .n_linear_ranges = ARRAY_SIZE(bd71837_buck5_volts), .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, .vsel_mask = BD71837_BUCK5_MASK, .vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, .vsel_range_mask = BD71837_BUCK5_RANGE_MASK, .linear_range_selectors = bd71837_buck5_volt_range_sel, .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck6", .of_match = of_match_ptr("BUCK6"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK6, .ops = &bd718xx_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71837_BUCK6_VOLTAGE_NUM, .linear_ranges = bd71837_buck6_volts, .n_linear_ranges = ARRAY_SIZE(bd71837_buck6_volts), .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT, .vsel_mask = BD71837_BUCK6_MASK, .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck7", .of_match = of_match_ptr("BUCK7"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK7, .ops = &bd718xx_buck_regulator_nolinear_ops, .type = REGULATOR_VOLTAGE, .volt_table = &bd718xx_3rd_nodvs_buck_volts[0], .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts), .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT, .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK, .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "buck8", .of_match = of_match_ptr("BUCK8"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_BUCK8, .ops = &bd718xx_buck_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM, .linear_ranges = bd718xx_4th_nodvs_buck_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts), .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT, .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK, .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, .enable_mask = BD718XX_BUCK_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, .mask = BD718XX_BUCK_SEL, .val = BD718XX_BUCK_SEL, }, }, { .desc = { .name = "ldo1", .of_match = of_match_ptr("LDO1"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO1, .ops = &bd718xx_pickable_range_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO1_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo1_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts), .vsel_reg = BD718XX_REG_LDO1_VOLT, .vsel_mask = BD718XX_LDO1_MASK, .vsel_range_reg = BD718XX_REG_LDO1_VOLT, .vsel_range_mask = BD718XX_LDO1_RANGE_MASK, .linear_range_selectors = bd718xx_ldo1_volt_range_sel, .enable_reg = BD718XX_REG_LDO1_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO1_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo2", .of_match = of_match_ptr("LDO2"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO2, .ops = &bd718xx_ldo_regulator_nolinear_ops, .type = REGULATOR_VOLTAGE, .volt_table = &ldo_2_volts[0], .vsel_reg = BD718XX_REG_LDO2_VOLT, .vsel_mask = BD718XX_LDO2_MASK, .n_voltages = ARRAY_SIZE(ldo_2_volts), .enable_reg = BD718XX_REG_LDO2_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO2_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo3", .of_match = of_match_ptr("LDO3"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO3, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO3_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo3_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts), .vsel_reg = BD718XX_REG_LDO3_VOLT, .vsel_mask = BD718XX_LDO3_MASK, .enable_reg = BD718XX_REG_LDO3_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO3_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo4", .of_match = of_match_ptr("LDO4"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO4, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO4_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo4_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts), .vsel_reg = BD718XX_REG_LDO4_VOLT, .vsel_mask = BD718XX_LDO4_MASK, .enable_reg = BD718XX_REG_LDO4_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO4_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, { .desc = { .name = "ldo5", .of_match = of_match_ptr("LDO5"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO5, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71837_LDO5_VOLTAGE_NUM, .linear_ranges = bd71837_ldo5_volts, .n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_volts), /* LDO5 is supplied by buck6 */ .supply_name = "buck6", .vsel_reg = BD718XX_REG_LDO5_VOLT, .vsel_mask = BD71837_LDO5_MASK, .enable_reg = BD718XX_REG_LDO5_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO5_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, .additional_inits = bd71837_ldo5_inits, .additional_init_amnt = ARRAY_SIZE(bd71837_ldo5_inits), }, { .desc = { .name = "ldo6", .of_match = of_match_ptr("LDO6"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO6, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD718XX_LDO6_VOLTAGE_NUM, .linear_ranges = bd718xx_ldo6_volts, .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts), /* LDO6 is supplied by buck7 */ .supply_name = "buck7", .vsel_reg = BD718XX_REG_LDO6_VOLT, .vsel_mask = BD718XX_LDO6_MASK, .enable_reg = BD718XX_REG_LDO6_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD718XX_REG_LDO6_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, .additional_inits = bd71837_ldo6_inits, .additional_init_amnt = ARRAY_SIZE(bd71837_ldo6_inits), }, { .desc = { .name = "ldo7", .of_match = of_match_ptr("LDO7"), .regulators_node = of_match_ptr("regulators"), .id = BD718XX_LDO7, .ops = &bd718xx_ldo_regulator_ops, .type = REGULATOR_VOLTAGE, .n_voltages = BD71837_LDO7_VOLTAGE_NUM, .linear_ranges = bd71837_ldo7_volts, .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_volts), .vsel_reg = BD71837_REG_LDO7_VOLT, .vsel_mask = BD71837_LDO7_MASK, .enable_reg = BD71837_REG_LDO7_VOLT, .enable_mask = BD718XX_LDO_EN, .owner = THIS_MODULE, }, .init = { .reg = BD71837_REG_LDO7_VOLT, .mask = BD718XX_LDO_SEL, .val = BD718XX_LDO_SEL, }, }, }; struct bd718xx_pmic_inits { const struct bd718xx_regulator_data *r_datas; unsigned int r_amount; }; static int bd718xx_probe(struct platform_device *pdev) { struct bd718xx *mfd; struct regulator_config config = { 0 }; struct bd718xx_pmic_inits pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] = { [ROHM_CHIP_TYPE_BD71837] = { .r_datas = bd71837_regulators, .r_amount = ARRAY_SIZE(bd71837_regulators), }, [ROHM_CHIP_TYPE_BD71847] = { .r_datas = bd71847_regulators, .r_amount = ARRAY_SIZE(bd71847_regulators), }, }; int i, j, err; bool use_snvs; mfd = dev_get_drvdata(pdev->dev.parent); if (!mfd) { dev_err(&pdev->dev, "No MFD driver data\n"); err = -EINVAL; goto err; } if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT || !pmic_regulators[mfd->chip.chip_type].r_datas) { dev_err(&pdev->dev, "Unsupported chip type\n"); err = -EINVAL; goto err; } /* Register LOCK release */ err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK, (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); if (err) { dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err); goto err; } else { dev_dbg(&pdev->dev, "Unlocked lock register 0x%x\n", BD718XX_REG_REGLOCK); } use_snvs = of_property_read_bool(pdev->dev.parent->of_node, "rohm,reset-snvs-powered"); /* * Change the next stage from poweroff to be READY instead of SNVS * for all reset types because OTP loading at READY will clear SEL * bit allowing HW defaults for power rails to be used */ if (!use_snvs) { err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_TRANS_COND1, BD718XX_ON_REQ_POWEROFF_MASK | BD718XX_SWRESET_POWEROFF_MASK | BD718XX_WDOG_POWEROFF_MASK | BD718XX_KEY_L_POWEROFF_MASK, BD718XX_POWOFF_TO_RDY); if (err) { dev_err(&pdev->dev, "Failed to change reset target\n"); goto err; } else { dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n"); } } for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) { const struct regulator_desc *desc; struct regulator_dev *rdev; const struct bd718xx_regulator_data *r; r = &pmic_regulators[mfd->chip.chip_type].r_datas[i]; desc = &r->desc; config.dev = pdev->dev.parent; config.regmap = mfd->chip.regmap; rdev = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register %s regulator\n", desc->name); err = PTR_ERR(rdev); goto err; } /* * Regulator register gets the regulator constraints and * applies them (set_machine_constraints). This should have * turned the control register(s) to correct values and we * can now switch the control from PMIC state machine to the * register interface * * At poweroff transition PMIC HW disables EN bit for * regulators but leaves SEL bit untouched. So if state * transition from POWEROFF is done to SNVS - then all power * rails controlled by SW (having SEL bit set) stay disabled * as EN is cleared. This will result boot failure if any * crucial systems are powered by these rails. We don't * enable SW control for crucial regulators if snvs state is * used */ if (!use_snvs || !rdev->constraints->always_on || !rdev->constraints->boot_on) { err = regmap_update_bits(mfd->chip.regmap, r->init.reg, r->init.mask, r->init.val); if (err) { dev_err(&pdev->dev, "Failed to take control for (%s)\n", desc->name); goto err; } } for (j = 0; j < r->additional_init_amnt; j++) { err = regmap_update_bits(mfd->chip.regmap, r->additional_inits[j].reg, r->additional_inits[j].mask, r->additional_inits[j].val); if (err) { dev_err(&pdev->dev, "Buck (%s) initialization failed\n", desc->name); goto err; } } } err: return err; } static struct platform_driver bd718xx_regulator = { .driver = { .name = "bd718xx-pmic", }, .probe = bd718xx_probe, }; module_platform_driver(bd718xx_regulator); MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); MODULE_DESCRIPTION("BD71837/BD71847 voltage regulator driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1