Contributors: 12
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Olof Johansson |
1278 |
95.87% |
4 |
19.05% |
| Grant C. Likely |
17 |
1.28% |
5 |
23.81% |
| Stephen Rothwell |
13 |
0.98% |
2 |
9.52% |
| Andy Fleming |
8 |
0.60% |
1 |
4.76% |
| Lennert Buytenhek |
4 |
0.30% |
2 |
9.52% |
| Rob Herring |
3 |
0.23% |
1 |
4.76% |
| Tejun Heo |
3 |
0.23% |
1 |
4.76% |
| Thomas Gleixner |
2 |
0.15% |
1 |
4.76% |
| Daniel Axtens |
2 |
0.15% |
1 |
4.76% |
| Uwe Kleine-König |
1 |
0.08% |
1 |
4.76% |
| Jon Loeliger |
1 |
0.08% |
1 |
4.76% |
| Darren Stevens |
1 |
0.08% |
1 |
4.76% |
| Total |
1333 |
|
21 |
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Author: Olof Johansson, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on drivers/net/fs_enet/mii-bitbang.c.
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/phy.h>
#include <linux/of_address.h>
#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#define DELAY 1
static void __iomem *gpio_regs;
struct gpio_priv {
int mdc_pin;
int mdio_pin;
};
#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin)
#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin)
static inline void mdio_lo(struct mii_bus *bus)
{
out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
}
static inline void mdio_hi(struct mii_bus *bus)
{
out_le32(gpio_regs, 1 << MDIO_PIN(bus));
}
static inline void mdc_lo(struct mii_bus *bus)
{
out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
}
static inline void mdc_hi(struct mii_bus *bus)
{
out_le32(gpio_regs, 1 << MDC_PIN(bus));
}
static inline void mdio_active(struct mii_bus *bus)
{
out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
}
static inline void mdio_tristate(struct mii_bus *bus)
{
out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
}
static inline int mdio_read(struct mii_bus *bus)
{
return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
}
static void clock_out(struct mii_bus *bus, int bit)
{
if (bit)
mdio_hi(bus);
else
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
}
/* Utility to send the preamble, address, and register (common to read and write). */
static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
{
int i;
/* CFE uses a really long preamble (40 bits). We'll do the same. */
mdio_active(bus);
for (i = 0; i < 40; i++) {
clock_out(bus, 1);
}
/* send the start bit (01) and the read opcode (10) or write (10) */
clock_out(bus, 0);
clock_out(bus, 1);
clock_out(bus, read);
clock_out(bus, !read);
/* send the PHY address */
for (i = 0; i < 5; i++) {
clock_out(bus, (addr & 0x10) != 0);
addr <<= 1;
}
/* send the register address */
for (i = 0; i < 5; i++) {
clock_out(bus, (reg & 0x10) != 0);
reg <<= 1;
}
}
static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
{
u16 rdreg;
int ret, i;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
bitbang_pre(bus, 1, addr, reg);
/* tri-state our MDIO I/O pin so we can read */
mdio_tristate(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
/* read 16 bits of register data, MSB first */
rdreg = 0;
for (i = 0; i < 16; i++) {
mdc_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
udelay(DELAY);
rdreg <<= 1;
rdreg |= mdio_read(bus);
}
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
udelay(DELAY);
ret = rdreg;
return ret;
}
static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
{
int i;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
u16 value = val & 0xffff;
bitbang_pre(bus, 0, addr, reg);
/* send the turnaround (10) */
mdc_lo(bus);
mdio_hi(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
mdc_lo(bus);
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
/* write 16 bits of register data, MSB first */
for (i = 0; i < 16; i++) {
mdc_lo(bus);
if (value & 0x8000)
mdio_hi(bus);
else
mdio_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
value <<= 1;
}
/*
* Tri-state the MDIO line.
*/
mdio_tristate(bus);
mdc_lo(bus);
udelay(DELAY);
mdc_hi(bus);
udelay(DELAY);
return 0;
}
static int gpio_mdio_reset(struct mii_bus *bus)
{
/*nothing here - dunno how to reset it*/
return 0;
}
static int gpio_mdio_probe(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct device_node *np = ofdev->dev.of_node;
struct mii_bus *new_bus;
struct gpio_priv *priv;
const unsigned int *prop;
int err;
err = -ENOMEM;
priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
if (!priv)
goto out;
new_bus = mdiobus_alloc();
if (!new_bus)
goto out_free_priv;
new_bus->name = "pasemi gpio mdio bus";
new_bus->read = &gpio_mdio_read;
new_bus->write = &gpio_mdio_write;
new_bus->reset = &gpio_mdio_reset;
prop = of_get_property(np, "reg", NULL);
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
new_bus->priv = priv;
prop = of_get_property(np, "mdc-pin", NULL);
priv->mdc_pin = *prop;
prop = of_get_property(np, "mdio-pin", NULL);
priv->mdio_pin = *prop;
new_bus->parent = dev;
dev_set_drvdata(dev, new_bus);
err = of_mdiobus_register(new_bus, np);
if (err != 0) {
pr_err("%s: Cannot register as MDIO bus, err %d\n",
new_bus->name, err);
goto out_free_irq;
}
return 0;
out_free_irq:
kfree(new_bus);
out_free_priv:
kfree(priv);
out:
return err;
}
static int gpio_mdio_remove(struct platform_device *dev)
{
struct mii_bus *bus = dev_get_drvdata(&dev->dev);
mdiobus_unregister(bus);
dev_set_drvdata(&dev->dev, NULL);
kfree(bus->priv);
bus->priv = NULL;
mdiobus_free(bus);
return 0;
}
static const struct of_device_id gpio_mdio_match[] =
{
{
.compatible = "gpio-mdio",
},
{},
};
MODULE_DEVICE_TABLE(of, gpio_mdio_match);
static struct platform_driver gpio_mdio_driver =
{
.probe = gpio_mdio_probe,
.remove = gpio_mdio_remove,
.driver = {
.name = "gpio-mdio-bitbang",
.of_match_table = gpio_mdio_match,
},
};
static int gpio_mdio_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
if (!np)
np = of_find_compatible_node(NULL, NULL,
"pasemi,pwrficient-gpio");
if (!np)
return -ENODEV;
gpio_regs = of_iomap(np, 0);
of_node_put(np);
if (!gpio_regs)
return -ENODEV;
return platform_driver_register(&gpio_mdio_driver);
}
module_init(gpio_mdio_init);
static void gpio_mdio_exit(void)
{
platform_driver_unregister(&gpio_mdio_driver);
if (gpio_regs)
iounmap(gpio_regs);
}
module_exit(gpio_mdio_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");