Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benjamin Herrenschmidt | 537 | 42.69% | 7 | 17.95% |
Nicholas Piggin | 397 | 31.56% | 8 | 20.51% |
Paul Mackerras | 129 | 10.25% | 5 | 12.82% |
Balbir Singh | 60 | 4.77% | 1 | 2.56% |
Michael Ellerman | 34 | 2.70% | 3 | 7.69% |
Greg Kurz | 28 | 2.23% | 1 | 2.56% |
Michael Neuling | 26 | 2.07% | 2 | 5.13% |
Santosh Sivaraj | 15 | 1.19% | 3 | 7.69% |
Stewart Smith | 8 | 0.64% | 1 | 2.56% |
Anton Blanchard | 7 | 0.56% | 2 | 5.13% |
Gautham R. Shenoy | 5 | 0.40% | 1 | 2.56% |
Ingo Molnar | 3 | 0.24% | 1 | 2.56% |
Shreyas B. Prabhu | 3 | 0.24% | 1 | 2.56% |
Preeti U. Murthy | 3 | 0.24% | 1 | 2.56% |
Thomas Gleixner | 2 | 0.16% | 1 | 2.56% |
Michael Roth | 1 | 0.08% | 1 | 2.56% |
Total | 1258 | 39 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * SMP support for PowerNV machines. * * Copyright 2011 IBM Corp. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/sched.h> #include <linux/sched/hotplug.h> #include <linux/smp.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/cpu.h> #include <asm/irq.h> #include <asm/smp.h> #include <asm/paca.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/firmware.h> #include <asm/vdso_datapage.h> #include <asm/cputhreads.h> #include <asm/xics.h> #include <asm/xive.h> #include <asm/opal.h> #include <asm/runlatch.h> #include <asm/code-patching.h> #include <asm/dbell.h> #include <asm/kvm_ppc.h> #include <asm/ppc-opcode.h> #include <asm/cpuidle.h> #include <asm/kexec.h> #include <asm/reg.h> #include <asm/powernv.h> #include "powernv.h" #ifdef DEBUG #include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif static void pnv_smp_setup_cpu(int cpu) { /* * P9 workaround for CI vector load (see traps.c), * enable the corresponding HMI interrupt */ if (pvr_version_is(PVR_POWER9)) mtspr(SPRN_HMEER, mfspr(SPRN_HMEER) | PPC_BIT(17)); if (xive_enabled()) xive_smp_setup_cpu(); else if (cpu != boot_cpuid) xics_setup_cpu(); } static int pnv_smp_kick_cpu(int nr) { unsigned int pcpu; unsigned long start_here = __pa(ppc_function_entry(generic_secondary_smp_init)); long rc; uint8_t status; if (nr < 0 || nr >= nr_cpu_ids) return -EINVAL; pcpu = get_hard_smp_processor_id(nr); /* * If we already started or OPAL is not supported, we just * kick the CPU via the PACA */ if (paca_ptrs[nr]->cpu_start || !firmware_has_feature(FW_FEATURE_OPAL)) goto kick; /* * At this point, the CPU can either be spinning on the way in * from kexec or be inside OPAL waiting to be started for the * first time. OPAL v3 allows us to query OPAL to know if it * has the CPUs, so we do that */ rc = opal_query_cpu_status(pcpu, &status); if (rc != OPAL_SUCCESS) { pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr); return -ENODEV; } /* * Already started, just kick it, probably coming from * kexec and spinning */ if (status == OPAL_THREAD_STARTED) goto kick; /* * Available/inactive, let's kick it */ if (status == OPAL_THREAD_INACTIVE) { pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); rc = opal_start_cpu(pcpu, start_here); if (rc != OPAL_SUCCESS) { pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr); return -ENODEV; } } else { /* * An unavailable CPU (or any other unknown status) * shouldn't be started. It should also * not be in the possible map but currently it can * happen */ pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable" " (status %d)...\n", nr, pcpu, status); return -ENODEV; } kick: return smp_generic_kick_cpu(nr); } #ifdef CONFIG_HOTPLUG_CPU static int pnv_smp_cpu_disable(void) { int cpu = smp_processor_id(); /* This is identical to pSeries... might consolidate by * moving migrate_irqs_away to a ppc_md with default to * the generic fixup_irqs. --BenH. */ set_cpu_online(cpu, false); vdso_data->processorCount--; if (cpu == boot_cpuid) boot_cpuid = cpumask_any(cpu_online_mask); if (xive_enabled()) xive_smp_disable_cpu(); else xics_migrate_irqs_away(); return 0; } static void pnv_flush_interrupts(void) { if (cpu_has_feature(CPU_FTR_ARCH_300)) { if (xive_enabled()) xive_flush_interrupt(); else icp_opal_flush_interrupt(); } else { icp_native_flush_interrupt(); } } static void pnv_smp_cpu_kill_self(void) { unsigned long srr1, unexpected_mask, wmask; unsigned int cpu; u64 lpcr_val; /* Standard hot unplug procedure */ idle_task_exit(); current->active_mm = NULL; /* for sanity */ cpu = smp_processor_id(); DBG("CPU%d offline\n", cpu); generic_set_cpu_dead(cpu); smp_wmb(); wmask = SRR1_WAKEMASK; if (cpu_has_feature(CPU_FTR_ARCH_207S)) wmask = SRR1_WAKEMASK_P8; /* * This turns the irq soft-disabled state we're called with, into a * hard-disabled state with pending irq_happened interrupts cleared. * * PACA_IRQ_DEC - Decrementer should be ignored. * PACA_IRQ_HMI - Can be ignored, processing is done in real mode. * PACA_IRQ_DBELL, EE, PMI - Unexpected. */ hard_irq_disable(); if (generic_check_cpu_restart(cpu)) goto out; unexpected_mask = ~(PACA_IRQ_DEC | PACA_IRQ_HMI | PACA_IRQ_HARD_DIS); if (local_paca->irq_happened & unexpected_mask) { if (local_paca->irq_happened & PACA_IRQ_EE) pnv_flush_interrupts(); DBG("CPU%d Unexpected exit while offline irq_happened=%lx!\n", cpu, local_paca->irq_happened); } local_paca->irq_happened = PACA_IRQ_HARD_DIS; /* * We don't want to take decrementer interrupts while we are * offline, so clear LPCR:PECE1. We keep PECE2 (and * LPCR_PECE_HVEE on P9) enabled so as to let IPIs in. * * If the CPU gets woken up by a special wakeup, ensure that * the SLW engine sets LPCR with decrementer bit cleared, else * the CPU will come back to the kernel due to a spurious * wakeup. */ lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1; pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val); while (!generic_check_cpu_restart(cpu)) { /* * Clear IPI flag, since we don't handle IPIs while * offline, except for those when changing micro-threading * mode, which are handled explicitly below, and those * for coming online, which are handled via * generic_check_cpu_restart() calls. */ kvmppc_clear_host_ipi(cpu); srr1 = pnv_cpu_offline(cpu); WARN_ON_ONCE(!irqs_disabled()); WARN_ON(lazy_irq_pending()); /* * If the SRR1 value indicates that we woke up due to * an external interrupt, then clear the interrupt. * We clear the interrupt before checking for the * reason, so as to avoid a race where we wake up for * some other reason, find nothing and clear the interrupt * just as some other cpu is sending us an interrupt. * If we returned from power7_nap as a result of * having finished executing in a KVM guest, then srr1 * contains 0. */ if (((srr1 & wmask) == SRR1_WAKEEE) || ((srr1 & wmask) == SRR1_WAKEHVI)) { pnv_flush_interrupts(); } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) { unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER); asm volatile(PPC_MSGCLR(%0) : : "r" (msg)); } else if ((srr1 & wmask) == SRR1_WAKERESET) { irq_set_pending_from_srr1(srr1); /* Does not return */ } smp_mb(); /* * For kdump kernels, we process the ipi and jump to * crash_ipi_callback */ if (kdump_in_progress()) { /* * If we got to this point, we've not used * NMI's, otherwise we would have gone * via the SRR1_WAKERESET path. We are * using regular IPI's for waking up offline * threads. */ struct pt_regs regs; ppc_save_regs(®s); crash_ipi_callback(®s); /* Does not return */ } if (cpu_core_split_required()) continue; if (srr1 && !generic_check_cpu_restart(cpu)) DBG("CPU%d Unexpected exit while offline srr1=%lx!\n", cpu, srr1); } /* * Re-enable decrementer interrupts in LPCR. * * Further, we want stop states to be woken up by decrementer * for non-hotplug cases. So program the LPCR via stop api as * well. */ lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1; pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val); out: DBG("CPU%d coming online...\n", cpu); } #endif /* CONFIG_HOTPLUG_CPU */ static int pnv_cpu_bootable(unsigned int nr) { /* * Starting with POWER8, the subcore logic relies on all threads of a * core being booted so that they can participate in split mode * switches. So on those machines we ignore the smt_enabled_at_boot * setting (smt-enabled on the kernel command line). */ if (cpu_has_feature(CPU_FTR_ARCH_207S)) return 1; return smp_generic_cpu_bootable(nr); } static int pnv_smp_prepare_cpu(int cpu) { if (xive_enabled()) return xive_smp_prepare_cpu(cpu); return 0; } /* Cause IPI as setup by the interrupt controller (xics or xive) */ static void (*ic_cause_ipi)(int cpu); static void pnv_cause_ipi(int cpu) { if (doorbell_try_core_ipi(cpu)) return; ic_cause_ipi(cpu); } static void __init pnv_smp_probe(void) { if (xive_enabled()) xive_smp_probe(); else xics_smp_probe(); if (cpu_has_feature(CPU_FTR_DBELL)) { ic_cause_ipi = smp_ops->cause_ipi; WARN_ON(!ic_cause_ipi); if (cpu_has_feature(CPU_FTR_ARCH_300)) smp_ops->cause_ipi = doorbell_global_ipi; else smp_ops->cause_ipi = pnv_cause_ipi; } } static int pnv_system_reset_exception(struct pt_regs *regs) { if (smp_handle_nmi_ipi(regs)) return 1; return 0; } static int pnv_cause_nmi_ipi(int cpu) { int64_t rc; if (cpu >= 0) { int h = get_hard_smp_processor_id(cpu); if (opal_check_token(OPAL_QUIESCE)) opal_quiesce(QUIESCE_HOLD, h); rc = opal_signal_system_reset(h); if (opal_check_token(OPAL_QUIESCE)) opal_quiesce(QUIESCE_RESUME, h); if (rc != OPAL_SUCCESS) return 0; return 1; } else if (cpu == NMI_IPI_ALL_OTHERS) { bool success = true; int c; if (opal_check_token(OPAL_QUIESCE)) opal_quiesce(QUIESCE_HOLD, -1); /* * We do not use broadcasts (yet), because it's not clear * exactly what semantics Linux wants or the firmware should * provide. */ for_each_online_cpu(c) { if (c == smp_processor_id()) continue; rc = opal_signal_system_reset( get_hard_smp_processor_id(c)); if (rc != OPAL_SUCCESS) success = false; } if (opal_check_token(OPAL_QUIESCE)) opal_quiesce(QUIESCE_RESUME, -1); if (success) return 1; /* * Caller will fall back to doorbells, which may pick * up the remainders. */ } return 0; } static struct smp_ops_t pnv_smp_ops = { .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ .cause_ipi = NULL, /* Filled at runtime by pnv_smp_probe() */ .cause_nmi_ipi = NULL, .probe = pnv_smp_probe, .prepare_cpu = pnv_smp_prepare_cpu, .kick_cpu = pnv_smp_kick_cpu, .setup_cpu = pnv_smp_setup_cpu, .cpu_bootable = pnv_cpu_bootable, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = pnv_smp_cpu_disable, .cpu_die = generic_cpu_die, #endif /* CONFIG_HOTPLUG_CPU */ }; /* This is called very early during platform setup_arch */ void __init pnv_smp_init(void) { if (opal_check_token(OPAL_SIGNAL_SYSTEM_RESET)) { ppc_md.system_reset_exception = pnv_system_reset_exception; pnv_smp_ops.cause_nmi_ipi = pnv_cause_nmi_ipi; } smp_ops = &pnv_smp_ops; #ifdef CONFIG_HOTPLUG_CPU ppc_md.cpu_die = pnv_smp_cpu_kill_self; #ifdef CONFIG_KEXEC_CORE crash_wake_offline = 1; #endif #endif }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1