Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dave Jones | 1582 | 71.13% | 25 | 43.10% |
Venkatesh Pallipadi | 129 | 5.80% | 2 | 3.45% |
Adrian Bunk | 122 | 5.49% | 1 | 1.72% |
Mike Travis | 110 | 4.95% | 4 | 6.90% |
Andi Kleen | 84 | 3.78% | 1 | 1.72% |
Rusty Russell | 61 | 2.74% | 4 | 6.90% |
Andrew Morton | 56 | 2.52% | 2 | 3.45% |
Viresh Kumar | 31 | 1.39% | 5 | 8.62% |
Jan Beulich | 10 | 0.45% | 1 | 1.72% |
Joe Perches | 9 | 0.40% | 2 | 3.45% |
Dominik Brodowski | 8 | 0.36% | 1 | 1.72% |
Tim Schmielau | 4 | 0.18% | 1 | 1.72% |
Gary Hade | 4 | 0.18% | 1 | 1.72% |
Vegard Nossum | 3 | 0.13% | 1 | 1.72% |
jia zhang | 3 | 0.13% | 1 | 1.72% |
Tejun Heo | 3 | 0.13% | 1 | 1.72% |
Jeremy Fitzhardinge | 1 | 0.04% | 1 | 1.72% |
Thomas Gleixner | 1 | 0.04% | 1 | 1.72% |
dongjian | 1 | 0.04% | 1 | 1.72% |
Tobias Klauser | 1 | 0.04% | 1 | 1.72% |
Yinghai Lu | 1 | 0.04% | 1 | 1.72% |
Total | 2224 | 58 |
// SPDX-License-Identifier: GPL-2.0-only /* * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium * M (part of the Centrino chipset). * * Since the original Pentium M, most new Intel CPUs support Enhanced * SpeedStep. * * Despite the "SpeedStep" in the name, this is almost entirely unlike * traditional SpeedStep. * * Modelled on speedstep.c * * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/sched.h> /* current */ #include <linux/delay.h> #include <linux/compiler.h> #include <linux/gfp.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/cpufeature.h> #include <asm/cpu_device_id.h> #define MAINTAINER "linux-pm@vger.kernel.org" #define INTEL_MSR_RANGE (0xffff) struct cpu_id { __u8 x86; /* CPU family */ __u8 x86_model; /* model */ __u8 x86_stepping; /* stepping */ }; enum { CPU_BANIAS, CPU_DOTHAN_A1, CPU_DOTHAN_A2, CPU_DOTHAN_B0, CPU_MP4HT_D0, CPU_MP4HT_E0, }; static const struct cpu_id cpu_ids[] = { [CPU_BANIAS] = { 6, 9, 5 }, [CPU_DOTHAN_A1] = { 6, 13, 1 }, [CPU_DOTHAN_A2] = { 6, 13, 2 }, [CPU_DOTHAN_B0] = { 6, 13, 6 }, [CPU_MP4HT_D0] = {15, 3, 4 }, [CPU_MP4HT_E0] = {15, 4, 1 }, }; #define N_IDS ARRAY_SIZE(cpu_ids) struct cpu_model { const struct cpu_id *cpu_id; const char *model_name; unsigned max_freq; /* max clock in kHz */ struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ }; static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x); /* Operating points for current CPU */ static DEFINE_PER_CPU(struct cpu_model *, centrino_model); static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); static struct cpufreq_driver centrino_driver; #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. This is stored as "driver_data" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ } /* * These voltage tables were derived from the Intel Pentium M * datasheet, document 25261202.pdf, Table 5. I have verified they * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium * M. */ /* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ static struct cpufreq_frequency_table banias_900[] = { OP(600, 844), OP(800, 988), OP(900, 1004), { .frequency = CPUFREQ_TABLE_END } }; /* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ static struct cpufreq_frequency_table banias_1000[] = { OP(600, 844), OP(800, 972), OP(900, 988), OP(1000, 1004), { .frequency = CPUFREQ_TABLE_END } }; /* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ static struct cpufreq_frequency_table banias_1100[] = { OP( 600, 956), OP( 800, 1020), OP( 900, 1100), OP(1000, 1164), OP(1100, 1180), { .frequency = CPUFREQ_TABLE_END } }; /* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ static struct cpufreq_frequency_table banias_1200[] = { OP( 600, 956), OP( 800, 1004), OP( 900, 1020), OP(1000, 1100), OP(1100, 1164), OP(1200, 1180), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.30GHz (Banias) */ static struct cpufreq_frequency_table banias_1300[] = { OP( 600, 956), OP( 800, 1260), OP(1000, 1292), OP(1200, 1356), OP(1300, 1388), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.40GHz (Banias) */ static struct cpufreq_frequency_table banias_1400[] = { OP( 600, 956), OP( 800, 1180), OP(1000, 1308), OP(1200, 1436), OP(1400, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.50GHz (Banias) */ static struct cpufreq_frequency_table banias_1500[] = { OP( 600, 956), OP( 800, 1116), OP(1000, 1228), OP(1200, 1356), OP(1400, 1452), OP(1500, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.60GHz (Banias) */ static struct cpufreq_frequency_table banias_1600[] = { OP( 600, 956), OP( 800, 1036), OP(1000, 1164), OP(1200, 1276), OP(1400, 1420), OP(1600, 1484), { .frequency = CPUFREQ_TABLE_END } }; /* Intel Pentium M processor 1.70GHz (Banias) */ static struct cpufreq_frequency_table banias_1700[] = { OP( 600, 956), OP( 800, 1004), OP(1000, 1116), OP(1200, 1228), OP(1400, 1308), OP(1700, 1484), { .frequency = CPUFREQ_TABLE_END } }; #undef OP #define _BANIAS(cpuid, max, name) \ { .cpu_id = cpuid, \ .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ .max_freq = (max)*1000, \ .op_points = banias_##max, \ } #define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) /* CPU models, their operating frequency range, and freq/voltage operating points */ static struct cpu_model models[] = { _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), BANIAS(1000), BANIAS(1100), BANIAS(1200), BANIAS(1300), BANIAS(1400), BANIAS(1500), BANIAS(1600), BANIAS(1700), /* NULL model_name is a wildcard */ { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, { NULL, } }; #undef _BANIAS #undef BANIAS static int centrino_cpu_init_table(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); struct cpu_model *model; for(model = models; model->cpu_id != NULL; model++) if (centrino_verify_cpu_id(cpu, model->cpu_id) && (model->model_name == NULL || strcmp(cpu->x86_model_id, model->model_name) == 0)) break; if (model->cpu_id == NULL) { /* No match at all */ pr_debug("no support for CPU model \"%s\": " "send /proc/cpuinfo to " MAINTAINER "\n", cpu->x86_model_id); return -ENOENT; } if (model->op_points == NULL) { /* Matched a non-match */ pr_debug("no table support for CPU model \"%s\"\n", cpu->x86_model_id); pr_debug("try using the acpi-cpufreq driver\n"); return -ENOENT; } per_cpu(centrino_model, policy->cpu) = model; pr_debug("found \"%s\": max frequency: %dkHz\n", model->model_name, model->max_freq); return 0; } #else static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; } #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x) { if ((c->x86 == x->x86) && (c->x86_model == x->x86_model) && (c->x86_stepping == x->x86_stepping)) return 1; return 0; } /* To be called only after centrino_model is initialized */ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) { int i; /* * Extract clock in kHz from PERF_CTL value * for centrino, as some DSDTs are buggy. * Ideally, this can be done using the acpi_data structure. */ if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { msr = (msr >> 8) & 0xff; return msr * 100000; } if ((!per_cpu(centrino_model, cpu)) || (!per_cpu(centrino_model, cpu)->op_points)) return 0; msr &= 0xffff; for (i = 0; per_cpu(centrino_model, cpu)->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) return per_cpu(centrino_model, cpu)-> op_points[i].frequency; } if (failsafe) return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; else return 0; } /* Return the current CPU frequency in kHz */ static unsigned int get_cur_freq(unsigned int cpu) { unsigned l, h; unsigned clock_freq; rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); clock_freq = extract_clock(l, cpu, 0); if (unlikely(clock_freq == 0)) { /* * On some CPUs, we can see transient MSR values (which are * not present in _PSS), while CPU is doing some automatic * P-state transition (like TM2). Get the last freq set * in PERF_CTL. */ rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); clock_freq = extract_clock(l, cpu, 1); } return clock_freq; } static int centrino_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); unsigned l, h; int i; /* Only Intel makes Enhanced Speedstep-capable CPUs */ if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) centrino_driver.flags |= CPUFREQ_CONST_LOOPS; if (policy->cpu != 0) return -ENODEV; for (i = 0; i < N_IDS; i++) if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) break; if (i != N_IDS) per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; if (!per_cpu(centrino_cpu, policy->cpu)) { pr_debug("found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " MAINTAINER "\n"); return -ENODEV; } if (centrino_cpu_init_table(policy)) return -ENODEV; /* Check to see if Enhanced SpeedStep is enabled, and try to enable it if not. */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l); wrmsr(MSR_IA32_MISC_ENABLE, l, h); /* check to see if it stuck */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { pr_info("couldn't enable Enhanced SpeedStep\n"); return -ENODEV; } } policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ policy->freq_table = per_cpu(centrino_model, policy->cpu)->op_points; return 0; } static int centrino_cpu_exit(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; if (!per_cpu(centrino_model, cpu)) return -ENODEV; per_cpu(centrino_model, cpu) = NULL; return 0; } /** * centrino_target - set a new CPUFreq policy * @policy: new policy * @index: index of target frequency * * Sets a new CPUFreq policy. */ static int centrino_target(struct cpufreq_policy *policy, unsigned int index) { unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; int retval = 0; unsigned int j, first_cpu; struct cpufreq_frequency_table *op_points; cpumask_var_t covered_cpus; if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) return -ENOMEM; if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { retval = -ENODEV; goto out; } first_cpu = 1; op_points = &per_cpu(centrino_model, cpu)->op_points[index]; for_each_cpu(j, policy->cpus) { int good_cpu; /* * Support for SMP systems. * Make sure we are running on CPU that wants to change freq */ if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) good_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); else good_cpu = j; if (good_cpu >= nr_cpu_ids) { pr_debug("couldn't limit to CPUs in this domain\n"); retval = -EAGAIN; if (first_cpu) { /* We haven't started the transition yet. */ goto out; } break; } msr = op_points->driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); if (msr == (oldmsr & 0xffff)) { pr_debug("no change needed - msr was and needs " "to be %x\n", oldmsr); retval = 0; goto out; } first_cpu = 0; /* all but 16 LSB are reserved, treat them with care */ oldmsr &= ~0xffff; msr &= 0xffff; oldmsr |= msr; } wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) break; cpumask_set_cpu(j, covered_cpus); } if (unlikely(retval)) { /* * We have failed halfway through the frequency change. * We have sent callbacks to policy->cpus and * MSRs have already been written on coverd_cpus. * Best effort undo.. */ for_each_cpu(j, covered_cpus) wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); } retval = 0; out: free_cpumask_var(covered_cpus); return retval; } static struct cpufreq_driver centrino_driver = { .name = "centrino", /* should be speedstep-centrino, but there's a 16 char limit */ .init = centrino_cpu_init, .exit = centrino_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, .target_index = centrino_target, .get = get_cur_freq, .attr = cpufreq_generic_attr, }; /* * This doesn't replace the detailed checks above because * the generic CPU IDs don't have a way to match for steppings * or ASCII model IDs. */ static const struct x86_cpu_id centrino_ids[] = { { X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST }, { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST }, { X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST }, { X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST }, {} }; #if 0 /* Autoload or not? Do not for now. */ MODULE_DEVICE_TABLE(x86cpu, centrino_ids); #endif /** * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver * * Initializes the Enhanced SpeedStep support. Returns -ENODEV on * unsupported devices, -ENOENT if there's no voltage table for this * particular CPU model, -EINVAL on problems during initiatization, * and zero on success. * * This is quite picky. Not only does the CPU have to advertise the * "est" flag in the cpuid capability flags, we look for a specific * CPU model and stepping, and we need to have the exact model name in * our voltage tables. That is, be paranoid about not releasing * someone's valuable magic smoke. */ static int __init centrino_init(void) { if (!x86_match_cpu(centrino_ids)) return -ENODEV; return cpufreq_register_driver(¢rino_driver); } static void __exit centrino_exit(void) { cpufreq_unregister_driver(¢rino_driver); } MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); MODULE_LICENSE ("GPL"); late_initcall(centrino_init); module_exit(centrino_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1