Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kamlakant Patel | 1868 | 92.84% | 5 | 29.41% |
Linus Walleij | 102 | 5.07% | 5 | 29.41% |
Axel Lin | 18 | 0.89% | 1 | 5.88% |
Thierry Reding | 8 | 0.40% | 2 | 11.76% |
Jayachandran C | 6 | 0.30% | 1 | 5.88% |
Bartosz Golaszewski | 6 | 0.30% | 1 | 5.88% |
Enrico Weigelt | 2 | 0.10% | 1 | 5.88% |
Arnd Bergmann | 2 | 0.10% | 1 | 5.88% |
Total | 2012 | 17 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2003-2015 Broadcom Corporation * All Rights Reserved */ #include <linux/gpio/driver.h> #include <linux/platform_device.h> #include <linux/of_device.h> #include <linux/module.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/irqchip/chained_irq.h> #include <linux/acpi.h> /* * XLP GPIO has multiple 32 bit registers for each feature where each register * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96 * require 3 32-bit registers for each feature. * Here we only define offset of the first register for each feature. Offset of * the registers for pins greater than 32 can be calculated as following(Use * GPIO_INT_STAT as example): * * offset = (gpio / XLP_GPIO_REGSZ) * 4; * reg_addr = addr + offset; * * where addr is base address of the that feature register and gpio is the pin. */ #define GPIO_OUTPUT_EN 0x00 #define GPIO_PADDRV 0x08 #define GPIO_INT_EN00 0x18 #define GPIO_INT_EN10 0x20 #define GPIO_INT_EN20 0x28 #define GPIO_INT_EN30 0x30 #define GPIO_INT_POL 0x38 #define GPIO_INT_TYPE 0x40 #define GPIO_INT_STAT 0x48 #define GPIO_9XX_BYTESWAP 0X00 #define GPIO_9XX_CTRL 0X04 #define GPIO_9XX_OUTPUT_EN 0x14 #define GPIO_9XX_PADDRV 0x24 /* * Only for 4 interrupt enable reg are defined for now, * total reg available are 12. */ #define GPIO_9XX_INT_EN00 0x44 #define GPIO_9XX_INT_EN10 0x54 #define GPIO_9XX_INT_EN20 0x64 #define GPIO_9XX_INT_EN30 0x74 #define GPIO_9XX_INT_POL 0x104 #define GPIO_9XX_INT_TYPE 0x114 #define GPIO_9XX_INT_STAT 0x124 #define GPIO_3XX_INT_EN00 0x18 #define GPIO_3XX_INT_EN10 0x20 #define GPIO_3XX_INT_EN20 0x28 #define GPIO_3XX_INT_EN30 0x30 #define GPIO_3XX_INT_POL 0x78 #define GPIO_3XX_INT_TYPE 0x80 #define GPIO_3XX_INT_STAT 0x88 /* Interrupt type register mask */ #define XLP_GPIO_IRQ_TYPE_LVL 0x0 #define XLP_GPIO_IRQ_TYPE_EDGE 0x1 /* Interrupt polarity register mask */ #define XLP_GPIO_IRQ_POL_HIGH 0x0 #define XLP_GPIO_IRQ_POL_LOW 0x1 #define XLP_GPIO_REGSZ 32 #define XLP_GPIO_IRQ_BASE 768 #define XLP_MAX_NR_GPIO 96 /* XLP variants supported by this driver */ enum { XLP_GPIO_VARIANT_XLP832 = 1, XLP_GPIO_VARIANT_XLP316, XLP_GPIO_VARIANT_XLP208, XLP_GPIO_VARIANT_XLP980, XLP_GPIO_VARIANT_XLP532, GPIO_VARIANT_VULCAN }; struct xlp_gpio_priv { struct gpio_chip chip; DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO); void __iomem *gpio_intr_en; /* pointer to first intr enable reg */ void __iomem *gpio_intr_stat; /* pointer to first intr status reg */ void __iomem *gpio_intr_type; /* pointer to first intr type reg */ void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */ void __iomem *gpio_out_en; /* pointer to first output enable reg */ void __iomem *gpio_paddrv; /* pointer to first pad drive reg */ spinlock_t lock; }; static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio) { u32 pos, regset; pos = gpio % XLP_GPIO_REGSZ; regset = (gpio / XLP_GPIO_REGSZ) * 4; return !!(readl(addr + regset) & BIT(pos)); } static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state) { u32 value, pos, regset; pos = gpio % XLP_GPIO_REGSZ; regset = (gpio / XLP_GPIO_REGSZ) * 4; value = readl(addr + regset); if (state) value |= BIT(pos); else value &= ~BIT(pos); writel(value, addr + regset); } static void xlp_gpio_irq_disable(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct xlp_gpio_priv *priv = gpiochip_get_data(gc); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); __clear_bit(d->hwirq, priv->gpio_enabled_mask); spin_unlock_irqrestore(&priv->lock, flags); } static void xlp_gpio_irq_mask_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct xlp_gpio_priv *priv = gpiochip_get_data(gc); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1); __clear_bit(d->hwirq, priv->gpio_enabled_mask); spin_unlock_irqrestore(&priv->lock, flags); } static void xlp_gpio_irq_unmask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct xlp_gpio_priv *priv = gpiochip_get_data(gc); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1); __set_bit(d->hwirq, priv->gpio_enabled_mask); spin_unlock_irqrestore(&priv->lock, flags); } static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct xlp_gpio_priv *priv = gpiochip_get_data(gc); int pol, irq_type; switch (type) { case IRQ_TYPE_EDGE_RISING: irq_type = XLP_GPIO_IRQ_TYPE_EDGE; pol = XLP_GPIO_IRQ_POL_HIGH; break; case IRQ_TYPE_EDGE_FALLING: irq_type = XLP_GPIO_IRQ_TYPE_EDGE; pol = XLP_GPIO_IRQ_POL_LOW; break; case IRQ_TYPE_LEVEL_HIGH: irq_type = XLP_GPIO_IRQ_TYPE_LVL; pol = XLP_GPIO_IRQ_POL_HIGH; break; case IRQ_TYPE_LEVEL_LOW: irq_type = XLP_GPIO_IRQ_TYPE_LVL; pol = XLP_GPIO_IRQ_POL_LOW; break; default: return -EINVAL; } xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type); xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol); return 0; } static struct irq_chip xlp_gpio_irq_chip = { .name = "XLP-GPIO", .irq_mask_ack = xlp_gpio_irq_mask_ack, .irq_disable = xlp_gpio_irq_disable, .irq_set_type = xlp_gpio_set_irq_type, .irq_unmask = xlp_gpio_irq_unmask, .flags = IRQCHIP_ONESHOT_SAFE, }; static void xlp_gpio_generic_handler(struct irq_desc *desc) { struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc); struct irq_chip *irqchip = irq_desc_get_chip(desc); int gpio, regoff; u32 gpio_stat; regoff = -1; gpio_stat = 0; chained_irq_enter(irqchip, desc); for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) { if (regoff != gpio / XLP_GPIO_REGSZ) { regoff = gpio / XLP_GPIO_REGSZ; gpio_stat = readl(priv->gpio_intr_stat + regoff * 4); } if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ)) generic_handle_irq(irq_find_mapping( priv->chip.irq.domain, gpio)); } chained_irq_exit(irqchip, desc); } static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state) { struct xlp_gpio_priv *priv = gpiochip_get_data(gc); BUG_ON(gpio >= gc->ngpio); xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1); return 0; } static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio) { struct xlp_gpio_priv *priv = gpiochip_get_data(gc); BUG_ON(gpio >= gc->ngpio); xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0); return 0; } static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio) { struct xlp_gpio_priv *priv = gpiochip_get_data(gc); BUG_ON(gpio >= gc->ngpio); return xlp_gpio_get_reg(priv->gpio_paddrv, gpio); } static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state) { struct xlp_gpio_priv *priv = gpiochip_get_data(gc); BUG_ON(gpio >= gc->ngpio); xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state); } static const struct of_device_id xlp_gpio_of_ids[] = { { .compatible = "netlogic,xlp832-gpio", .data = (void *)XLP_GPIO_VARIANT_XLP832, }, { .compatible = "netlogic,xlp316-gpio", .data = (void *)XLP_GPIO_VARIANT_XLP316, }, { .compatible = "netlogic,xlp208-gpio", .data = (void *)XLP_GPIO_VARIANT_XLP208, }, { .compatible = "netlogic,xlp980-gpio", .data = (void *)XLP_GPIO_VARIANT_XLP980, }, { .compatible = "netlogic,xlp532-gpio", .data = (void *)XLP_GPIO_VARIANT_XLP532, }, { .compatible = "brcm,vulcan-gpio", .data = (void *)GPIO_VARIANT_VULCAN, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids); static int xlp_gpio_probe(struct platform_device *pdev) { struct gpio_chip *gc; struct gpio_irq_chip *girq; struct xlp_gpio_priv *priv; void __iomem *gpio_base; int irq_base, irq, err; int ngpio; u32 soc_type; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; gpio_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(gpio_base)) return PTR_ERR(gpio_base); irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; if (pdev->dev.of_node) { soc_type = (uintptr_t)of_device_get_match_data(&pdev->dev); } else { const struct acpi_device_id *acpi_id; acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); if (!acpi_id || !acpi_id->driver_data) { dev_err(&pdev->dev, "Unable to match ACPI ID\n"); return -ENODEV; } soc_type = (uintptr_t) acpi_id->driver_data; } switch (soc_type) { case XLP_GPIO_VARIANT_XLP832: priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; priv->gpio_paddrv = gpio_base + GPIO_PADDRV; priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT; priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE; priv->gpio_intr_pol = gpio_base + GPIO_INT_POL; priv->gpio_intr_en = gpio_base + GPIO_INT_EN00; ngpio = 41; break; case XLP_GPIO_VARIANT_XLP208: case XLP_GPIO_VARIANT_XLP316: priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; priv->gpio_paddrv = gpio_base + GPIO_PADDRV; priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT; priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE; priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL; priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00; ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57; break; case XLP_GPIO_VARIANT_XLP980: case XLP_GPIO_VARIANT_XLP532: case GPIO_VARIANT_VULCAN: priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN; priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV; priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT; priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE; priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL; priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00; if (soc_type == XLP_GPIO_VARIANT_XLP980) ngpio = 66; else if (soc_type == XLP_GPIO_VARIANT_XLP532) ngpio = 67; else ngpio = 70; break; default: dev_err(&pdev->dev, "Unknown Processor type!\n"); return -ENODEV; } bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO); gc = &priv->chip; gc->owner = THIS_MODULE; gc->label = dev_name(&pdev->dev); gc->base = 0; gc->parent = &pdev->dev; gc->ngpio = ngpio; gc->of_node = pdev->dev.of_node; gc->direction_output = xlp_gpio_dir_output; gc->direction_input = xlp_gpio_dir_input; gc->set = xlp_gpio_set; gc->get = xlp_gpio_get; spin_lock_init(&priv->lock); /* XLP(MIPS) has fixed range for GPIO IRQs, Vulcan(ARM64) does not */ if (soc_type != GPIO_VARIANT_VULCAN) { irq_base = devm_irq_alloc_descs(&pdev->dev, -1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0); if (irq_base < 0) { dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); return irq_base; } } else { irq_base = 0; } girq = &gc->irq; girq->chip = &xlp_gpio_irq_chip; girq->parent_handler = xlp_gpio_generic_handler; girq->num_parents = 1; girq->parents = devm_kcalloc(&pdev->dev, 1, sizeof(*girq->parents), GFP_KERNEL); if (!girq->parents) return -ENOMEM; girq->parents[0] = irq; girq->first = irq_base; girq->default_type = IRQ_TYPE_NONE; girq->handler = handle_level_irq; err = gpiochip_add_data(gc, priv); if (err < 0) return err; dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio); return 0; } #ifdef CONFIG_ACPI static const struct acpi_device_id xlp_gpio_acpi_match[] = { { "BRCM9006", GPIO_VARIANT_VULCAN }, { "CAV9006", GPIO_VARIANT_VULCAN }, {}, }; MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match); #endif static struct platform_driver xlp_gpio_driver = { .driver = { .name = "xlp-gpio", .of_match_table = xlp_gpio_of_ids, .acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match), }, .probe = xlp_gpio_probe, }; module_platform_driver(xlp_gpio_driver); MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>"); MODULE_DESCRIPTION("Netlogic XLP GPIO Driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1