Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Eric Anholt | 757 | 95.94% | 3 | 30.00% |
Benjamin Gaignard | 20 | 2.53% | 1 | 10.00% |
Daniel Vetter | 5 | 0.63% | 3 | 30.00% |
Sam Ravnborg | 3 | 0.38% | 1 | 10.00% |
Sabyasachi Gupta | 2 | 0.25% | 1 | 10.00% |
Thomas Gleixner | 2 | 0.25% | 1 | 10.00% |
Total | 789 | 10 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> * Copyright (C) 2017 Broadcom */ #include <drm/drm_atomic_helper.h> #include <drm/drm_connector.h> #include <drm/drm_encoder.h> #include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_panel.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h> struct panel_bridge { struct drm_bridge bridge; struct drm_connector connector; struct drm_panel *panel; u32 connector_type; }; static inline struct panel_bridge * drm_bridge_to_panel_bridge(struct drm_bridge *bridge) { return container_of(bridge, struct panel_bridge, bridge); } static inline struct panel_bridge * drm_connector_to_panel_bridge(struct drm_connector *connector) { return container_of(connector, struct panel_bridge, connector); } static int panel_bridge_connector_get_modes(struct drm_connector *connector) { struct panel_bridge *panel_bridge = drm_connector_to_panel_bridge(connector); return drm_panel_get_modes(panel_bridge->panel); } static const struct drm_connector_helper_funcs panel_bridge_connector_helper_funcs = { .get_modes = panel_bridge_connector_get_modes, }; static const struct drm_connector_funcs panel_bridge_connector_funcs = { .reset = drm_atomic_helper_connector_reset, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = drm_connector_cleanup, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; static int panel_bridge_attach(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); struct drm_connector *connector = &panel_bridge->connector; int ret; if (!bridge->encoder) { DRM_ERROR("Missing encoder\n"); return -ENODEV; } drm_connector_helper_add(connector, &panel_bridge_connector_helper_funcs); ret = drm_connector_init(bridge->dev, connector, &panel_bridge_connector_funcs, panel_bridge->connector_type); if (ret) { DRM_ERROR("Failed to initialize connector\n"); return ret; } drm_connector_attach_encoder(&panel_bridge->connector, bridge->encoder); ret = drm_panel_attach(panel_bridge->panel, &panel_bridge->connector); if (ret < 0) return ret; return 0; } static void panel_bridge_detach(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_panel_detach(panel_bridge->panel); } static void panel_bridge_pre_enable(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_panel_prepare(panel_bridge->panel); } static void panel_bridge_enable(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_panel_enable(panel_bridge->panel); } static void panel_bridge_disable(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_panel_disable(panel_bridge->panel); } static void panel_bridge_post_disable(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_panel_unprepare(panel_bridge->panel); } static const struct drm_bridge_funcs panel_bridge_bridge_funcs = { .attach = panel_bridge_attach, .detach = panel_bridge_detach, .pre_enable = panel_bridge_pre_enable, .enable = panel_bridge_enable, .disable = panel_bridge_disable, .post_disable = panel_bridge_post_disable, }; /** * drm_panel_bridge_add - Creates a &drm_bridge and &drm_connector that * just calls the appropriate functions from &drm_panel. * * @panel: The drm_panel being wrapped. Must be non-NULL. * @connector_type: The DRM_MODE_CONNECTOR_* for the connector to be * created. * * For drivers converting from directly using drm_panel: The expected * usage pattern is that during either encoder module probe or DSI * host attach, a drm_panel will be looked up through * drm_of_find_panel_or_bridge(). drm_panel_bridge_add() is used to * wrap that panel in the new bridge, and the result can then be * passed to drm_bridge_attach(). The drm_panel_prepare() and related * functions can be dropped from the encoder driver (they're now * called by the KMS helpers before calling into the encoder), along * with connector creation. When done with the bridge (after * drm_mode_config_cleanup() if the bridge has already been attached), then * drm_panel_bridge_remove() to free it. * * See devm_drm_panel_bridge_add() for an automatically manged version of this * function. */ struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel, u32 connector_type) { struct panel_bridge *panel_bridge; if (!panel) return ERR_PTR(-EINVAL); panel_bridge = devm_kzalloc(panel->dev, sizeof(*panel_bridge), GFP_KERNEL); if (!panel_bridge) return ERR_PTR(-ENOMEM); panel_bridge->connector_type = connector_type; panel_bridge->panel = panel; panel_bridge->bridge.funcs = &panel_bridge_bridge_funcs; #ifdef CONFIG_OF panel_bridge->bridge.of_node = panel->dev->of_node; #endif drm_bridge_add(&panel_bridge->bridge); return &panel_bridge->bridge; } EXPORT_SYMBOL(drm_panel_bridge_add); /** * drm_panel_bridge_remove - Unregisters and frees a drm_bridge * created by drm_panel_bridge_add(). * * @bridge: The drm_bridge being freed. */ void drm_panel_bridge_remove(struct drm_bridge *bridge) { struct panel_bridge *panel_bridge; if (!bridge) return; if (bridge->funcs != &panel_bridge_bridge_funcs) return; panel_bridge = drm_bridge_to_panel_bridge(bridge); drm_bridge_remove(bridge); devm_kfree(panel_bridge->panel->dev, bridge); } EXPORT_SYMBOL(drm_panel_bridge_remove); static void devm_drm_panel_bridge_release(struct device *dev, void *res) { struct drm_bridge **bridge = res; drm_panel_bridge_remove(*bridge); } /** * devm_drm_panel_bridge_add - Creates a managed &drm_bridge and &drm_connector * that just calls the appropriate functions from &drm_panel. * @dev: device to tie the bridge lifetime to * @panel: The drm_panel being wrapped. Must be non-NULL. * @connector_type: The DRM_MODE_CONNECTOR_* for the connector to be * created. * * This is the managed version of drm_panel_bridge_add() which automatically * calls drm_panel_bridge_remove() when @dev is unbound. */ struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev, struct drm_panel *panel, u32 connector_type) { struct drm_bridge **ptr, *bridge; ptr = devres_alloc(devm_drm_panel_bridge_release, sizeof(*ptr), GFP_KERNEL); if (!ptr) return ERR_PTR(-ENOMEM); bridge = drm_panel_bridge_add(panel, connector_type); if (!IS_ERR(bridge)) { *ptr = bridge; devres_add(dev, ptr); } else { devres_free(ptr); } return bridge; } EXPORT_SYMBOL(devm_drm_panel_bridge_add);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1