Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jeykumar Sankaran | 869 | 99.20% | 3 | 50.00% |
Jordan Crouse | 4 | 0.46% | 1 | 16.67% |
Thomas Gleixner | 2 | 0.23% | 1 | 16.67% |
Sean Paul | 1 | 0.11% | 1 | 16.67% |
Total | 876 | 6 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. */ #ifndef __DPU_ENCODER_PHYS_H__ #define __DPU_ENCODER_PHYS_H__ #include <linux/jiffies.h> #include "dpu_kms.h" #include "dpu_hw_intf.h" #include "dpu_hw_pingpong.h" #include "dpu_hw_ctl.h" #include "dpu_hw_top.h" #include "dpu_encoder.h" #include "dpu_crtc.h" #define DPU_ENCODER_NAME_MAX 16 /* wait for at most 2 vsync for lowest refresh rate (24hz) */ #define KICKOFF_TIMEOUT_MS 84 #define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS) /** * enum dpu_enc_split_role - Role this physical encoder will play in a * split-panel configuration, where one panel is master, and others slaves. * Masters have extra responsibilities, like managing the VBLANK IRQ. * @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master. * @ENC_ROLE_MASTER: This encoder is the master of a split panel config. * @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config. */ enum dpu_enc_split_role { ENC_ROLE_SOLO, ENC_ROLE_MASTER, ENC_ROLE_SLAVE, }; /** * enum dpu_enc_enable_state - current enabled state of the physical encoder * @DPU_ENC_DISABLING: Encoder transitioning to disable state * Events bounding transition are encoder type specific * @DPU_ENC_DISABLED: Encoder is disabled * @DPU_ENC_ENABLING: Encoder transitioning to enabled * Events bounding transition are encoder type specific * @DPU_ENC_ENABLED: Encoder is enabled * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset * to recover from a previous error */ enum dpu_enc_enable_state { DPU_ENC_DISABLING, DPU_ENC_DISABLED, DPU_ENC_ENABLING, DPU_ENC_ENABLED, DPU_ENC_ERR_NEEDS_HW_RESET }; struct dpu_encoder_phys; /** * struct dpu_encoder_virt_ops - Interface the containing virtual encoder * provides for the physical encoders to use to callback. * @handle_vblank_virt: Notify virtual encoder of vblank IRQ reception * Note: This is called from IRQ handler context. * @handle_underrun_virt: Notify virtual encoder of underrun IRQ reception * Note: This is called from IRQ handler context. * @handle_frame_done: Notify virtual encoder that this phys encoder * completes last request frame. */ struct dpu_encoder_virt_ops { void (*handle_vblank_virt)(struct drm_encoder *, struct dpu_encoder_phys *phys); void (*handle_underrun_virt)(struct drm_encoder *, struct dpu_encoder_phys *phys); void (*handle_frame_done)(struct drm_encoder *, struct dpu_encoder_phys *phys, u32 event); }; /** * struct dpu_encoder_phys_ops - Interface the physical encoders provide to * the containing virtual encoder. * @late_register: DRM Call. Add Userspace interfaces, debugfs. * @prepare_commit: MSM Atomic Call, start of atomic commit sequence * @is_master: Whether this phys_enc is the current master * encoder. Can be switched at enable time. Based * on split_role and current mode (CMD/VID). * @mode_fixup: DRM Call. Fixup a DRM mode. * @mode_set: DRM Call. Set a DRM mode. * This likely caches the mode, for use at enable. * @enable: DRM Call. Enable a DRM mode. * @disable: DRM Call. Disable mode. * @atomic_check: DRM Call. Atomic check new DRM state. * @destroy: DRM Call. Destroy and release resources. * @get_hw_resources: Populate the structure with the hardware * resources that this phys_enc is using. * Expect no overlap between phys_encs. * @control_vblank_irq Register/Deregister for VBLANK IRQ * @wait_for_commit_done: Wait for hardware to have flushed the * current pending frames to hardware * @wait_for_tx_complete: Wait for hardware to transfer the pixels * to the panel * @wait_for_vblank: Wait for VBLANK, for sub-driver internal use * @prepare_for_kickoff: Do any work necessary prior to a kickoff * For CMD encoder, may wait for previous tx done * @handle_post_kickoff: Do any work necessary post-kickoff work * @trigger_start: Process start event on physical encoder * @needs_single_flush: Whether encoder slaves need to be flushed * @irq_control: Handler to enable/disable all the encoder IRQs * @prepare_idle_pc: phys encoder can update the vsync_enable status * on idle power collapse prepare * @restore: Restore all the encoder configs. * @get_line_count: Obtain current vertical line count */ struct dpu_encoder_phys_ops { int (*late_register)(struct dpu_encoder_phys *encoder, struct dentry *debugfs_root); void (*prepare_commit)(struct dpu_encoder_phys *encoder); bool (*is_master)(struct dpu_encoder_phys *encoder); bool (*mode_fixup)(struct dpu_encoder_phys *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); void (*mode_set)(struct dpu_encoder_phys *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); void (*enable)(struct dpu_encoder_phys *encoder); void (*disable)(struct dpu_encoder_phys *encoder); int (*atomic_check)(struct dpu_encoder_phys *encoder, struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state); void (*destroy)(struct dpu_encoder_phys *encoder); void (*get_hw_resources)(struct dpu_encoder_phys *encoder, struct dpu_encoder_hw_resources *hw_res); int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable); int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc); int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc); int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc); void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc); void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc); void (*trigger_start)(struct dpu_encoder_phys *phys_enc); bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc); void (*irq_control)(struct dpu_encoder_phys *phys, bool enable); void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc); void (*restore)(struct dpu_encoder_phys *phys); int (*get_line_count)(struct dpu_encoder_phys *phys); }; /** * enum dpu_intr_idx - dpu encoder interrupt index * @INTR_IDX_VSYNC: Vsync interrupt for video mode panel * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel */ enum dpu_intr_idx { INTR_IDX_VSYNC, INTR_IDX_PINGPONG, INTR_IDX_UNDERRUN, INTR_IDX_CTL_START, INTR_IDX_RDPTR, INTR_IDX_MAX, }; /** * dpu_encoder_irq - tracking structure for interrupts * @name: string name of interrupt * @intr_type: Encoder interrupt type * @intr_idx: Encoder interrupt enumeration * @hw_idx: HW Block ID * @irq_idx: IRQ interface lookup index from DPU IRQ framework * will be -EINVAL if IRQ is not registered * @irq_cb: interrupt callback */ struct dpu_encoder_irq { const char *name; enum dpu_intr_type intr_type; enum dpu_intr_idx intr_idx; int hw_idx; int irq_idx; struct dpu_irq_callback cb; }; /** * struct dpu_encoder_phys - physical encoder that drives a single INTF block * tied to a specific panel / sub-panel. Abstract type, sub-classed by * phys_vid or phys_cmd for video mode or command mode encs respectively. * @parent: Pointer to the containing virtual encoder * @connector: If a mode is set, cached pointer to the active connector * @ops: Operations exposed to the virtual encoder * @parent_ops: Callbacks exposed by the parent to the phys_enc * @hw_mdptop: Hardware interface to the top registers * @hw_ctl: Hardware interface to the ctl registers * @hw_pp: Hardware interface to the ping pong registers * @hw_intf: Hardware interface to the intf registers * @dpu_kms: Pointer to the dpu_kms top level * @cached_mode: DRM mode cached at mode_set time, acted on in enable * @enabled: Whether the encoder has enabled and running a mode * @split_role: Role to play in a split-panel configuration * @intf_mode: Interface mode * @intf_idx: Interface index on dpu hardware * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes * @enable_state: Enable state tracking * @vblank_refcount: Reference count of vblank request * @vsync_cnt: Vsync count for the physical encoder * @underrun_cnt: Underrun count for the physical encoder * @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs * vs. the number of done/vblank irqs. Should hover * between 0-2 Incremented when a new kickoff is * scheduled. Decremented in irq handler * @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start * pending. * @pending_kickoff_wq: Wait queue for blocking until kickoff completes * @irq: IRQ tracking structures */ struct dpu_encoder_phys { struct drm_encoder *parent; struct drm_connector *connector; struct dpu_encoder_phys_ops ops; const struct dpu_encoder_virt_ops *parent_ops; struct dpu_hw_mdp *hw_mdptop; struct dpu_hw_ctl *hw_ctl; struct dpu_hw_pingpong *hw_pp; struct dpu_hw_intf *hw_intf; struct dpu_kms *dpu_kms; struct drm_display_mode cached_mode; enum dpu_enc_split_role split_role; enum dpu_intf_mode intf_mode; enum dpu_intf intf_idx; spinlock_t *enc_spinlock; enum dpu_enc_enable_state enable_state; atomic_t vblank_refcount; atomic_t vsync_cnt; atomic_t underrun_cnt; atomic_t pending_ctlstart_cnt; atomic_t pending_kickoff_cnt; wait_queue_head_t pending_kickoff_wq; struct dpu_encoder_irq irq[INTR_IDX_MAX]; }; static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) { atomic_inc_return(&phys->pending_ctlstart_cnt); return atomic_inc_return(&phys->pending_kickoff_cnt); } /** * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command * mode specific operations * @base: Baseclass physical encoder structure * @intf_idx: Intf Block index used by this phys encoder * @stream_sel: Stream selection for multi-stream interfaces * @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt * after ctl_start instead of before next frame kickoff * @pp_timeout_report_cnt: number of pingpong done irq timeout errors * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK * @pending_vblank_wq: Wait queue for blocking until VBLANK received */ struct dpu_encoder_phys_cmd { struct dpu_encoder_phys base; int stream_sel; bool serialize_wait4pp; int pp_timeout_report_cnt; atomic_t pending_vblank_cnt; wait_queue_head_t pending_vblank_wq; }; /** * struct dpu_enc_phys_init_params - initialization parameters for phys encs * @dpu_kms: Pointer to the dpu_kms top level * @parent: Pointer to the containing virtual encoder * @parent_ops: Callbacks exposed by the parent to the phys_enc * @split_role: Role to play in a split-panel configuration * @intf_idx: Interface index this phys_enc will control * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes */ struct dpu_enc_phys_init_params { struct dpu_kms *dpu_kms; struct drm_encoder *parent; const struct dpu_encoder_virt_ops *parent_ops; enum dpu_enc_split_role split_role; enum dpu_intf intf_idx; spinlock_t *enc_spinlock; }; /** * dpu_encoder_wait_info - container for passing arguments to irq wait functions * @wq: wait queue structure * @atomic_cnt: wait until atomic_cnt equals zero * @timeout_ms: timeout value in milliseconds */ struct dpu_encoder_wait_info { wait_queue_head_t *wq; atomic_t *atomic_cnt; s64 timeout_ms; }; /** * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder * @p: Pointer to init params structure * Return: Error code or newly allocated encoder */ struct dpu_encoder_phys *dpu_encoder_phys_vid_init( struct dpu_enc_phys_init_params *p); /** * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder * @p: Pointer to init params structure * Return: Error code or newly allocated encoder */ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( struct dpu_enc_phys_init_params *p); /** * dpu_encoder_helper_trigger_start - control start helper function * This helper function may be optionally specified by physical * encoders if they require ctl_start triggering. * @phys_enc: Pointer to physical encoder structure */ void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc); static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( struct dpu_encoder_phys *phys_enc) { struct dpu_crtc_state *dpu_cstate; if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING) return BLEND_3D_NONE; dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state); if (phys_enc->split_role == ENC_ROLE_SOLO && dpu_cstate->num_mixers == CRTC_DUAL_MIXERS) return BLEND_3D_H_ROW_INT; return BLEND_3D_NONE; } /** * dpu_encoder_helper_split_config - split display configuration helper function * This helper function may be used by physical encoders to configure * the split display related registers. * @phys_enc: Pointer to physical encoder structure * @interface: enum dpu_intf setting */ void dpu_encoder_helper_split_config( struct dpu_encoder_phys *phys_enc, enum dpu_intf interface); /** * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has * timed out, including reporting frame error event to crtc and debug dump * @phys_enc: Pointer to physical encoder structure * @intr_idx: Failing interrupt index */ void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc, enum dpu_intr_idx intr_idx); /** * dpu_encoder_helper_wait_for_irq - utility to wait on an irq. * note: will call dpu_encoder_helper_wait_for_irq on timeout * @phys_enc: Pointer to physical encoder structure * @intr_idx: encoder interrupt index * @wait_info: wait info struct * @Return: 0 or -ERROR */ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, enum dpu_intr_idx intr_idx, struct dpu_encoder_wait_info *wait_info); /** * dpu_encoder_helper_register_irq - register and enable an irq * @phys_enc: Pointer to physical encoder structure * @intr_idx: encoder interrupt index * @Return: 0 or -ERROR */ int dpu_encoder_helper_register_irq(struct dpu_encoder_phys *phys_enc, enum dpu_intr_idx intr_idx); /** * dpu_encoder_helper_unregister_irq - unregister and disable an irq * @phys_enc: Pointer to physical encoder structure * @intr_idx: encoder interrupt index * @Return: 0 or -ERROR */ int dpu_encoder_helper_unregister_irq(struct dpu_encoder_phys *phys_enc, enum dpu_intr_idx intr_idx); #endif /* __dpu_encoder_phys_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1