Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Rob Clark | 321 | 80.65% | 1 | 16.67% |
Archit Taneja | 71 | 17.84% | 2 | 33.33% |
Sam Ravnborg | 3 | 0.75% | 1 | 16.67% |
Thomas Gleixner | 2 | 0.50% | 1 | 16.67% |
Arnd Bergmann | 1 | 0.25% | 1 | 16.67% |
Total | 398 | 6 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Red Hat * Author: Rob Clark <robdclark@gmail.com> */ #include <linux/delay.h> #include "hdmi.h" static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy, unsigned long int pixclock) { /* De-serializer delay D/C for non-lbk mode: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0, HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3)); if (pixclock == 27000000) { /* video_format == HDMI_VFRMT_720x480p60_16_9 */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1, HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) | HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3)); } else { hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1, HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) | HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4)); } /* No matter what, start from the power down mode: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_PD_PWRGEN | HDMI_8x60_PHY_REG2_PD_PLL | HDMI_8x60_PHY_REG2_PD_DRIVE_4 | HDMI_8x60_PHY_REG2_PD_DRIVE_3 | HDMI_8x60_PHY_REG2_PD_DRIVE_2 | HDMI_8x60_PHY_REG2_PD_DRIVE_1 | HDMI_8x60_PHY_REG2_PD_DESER); /* Turn PowerGen on: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_PD_PLL | HDMI_8x60_PHY_REG2_PD_DRIVE_4 | HDMI_8x60_PHY_REG2_PD_DRIVE_3 | HDMI_8x60_PHY_REG2_PD_DRIVE_2 | HDMI_8x60_PHY_REG2_PD_DRIVE_1 | HDMI_8x60_PHY_REG2_PD_DESER); /* Turn PLL power on: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_PD_DRIVE_4 | HDMI_8x60_PHY_REG2_PD_DRIVE_3 | HDMI_8x60_PHY_REG2_PD_DRIVE_2 | HDMI_8x60_PHY_REG2_PD_DRIVE_1 | HDMI_8x60_PHY_REG2_PD_DESER); /* Write to HIGH after PLL power down de-assert: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, HDMI_8x60_PHY_REG3_PLL_ENABLE); /* ASIC power on; PHY REG9 = 0 */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0); /* Enable PLL lock detect, PLL lock det will go high after lock * Enable the re-time logic */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12, HDMI_8x60_PHY_REG12_RETIMING_EN | HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN); /* Drivers are on: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_PD_DESER); /* If the RX detector is needed: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_RCV_SENSE_EN | HDMI_8x60_PHY_REG2_PD_DESER); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0); hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0); /* If we want to use lock enable based on counting: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12, HDMI_8x60_PHY_REG12_RETIMING_EN | HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN | HDMI_8x60_PHY_REG12_FORCE_LOCK); } static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy) { /* Assert RESET PHY from controller */ hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, HDMI_PHY_CTRL_SW_RESET); udelay(10); /* De-assert RESET PHY from controller */ hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0); /* Turn off Driver */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_PD_DRIVE_4 | HDMI_8x60_PHY_REG2_PD_DRIVE_3 | HDMI_8x60_PHY_REG2_PD_DRIVE_2 | HDMI_8x60_PHY_REG2_PD_DRIVE_1 | HDMI_8x60_PHY_REG2_PD_DESER); udelay(10); /* Disable PLL */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0); /* Power down PHY, but keep RX-sense: */ hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2, HDMI_8x60_PHY_REG2_RCV_SENSE_EN | HDMI_8x60_PHY_REG2_PD_PWRGEN | HDMI_8x60_PHY_REG2_PD_PLL | HDMI_8x60_PHY_REG2_PD_DRIVE_4 | HDMI_8x60_PHY_REG2_PD_DRIVE_3 | HDMI_8x60_PHY_REG2_PD_DRIVE_2 | HDMI_8x60_PHY_REG2_PD_DRIVE_1 | HDMI_8x60_PHY_REG2_PD_DESER); } const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = { .type = MSM_HDMI_PHY_8x60, .powerup = hdmi_phy_8x60_powerup, .powerdown = hdmi_phy_8x60_powerdown, };
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1