Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Peter Meerwald-Stadler | 1222 | 98.47% | 5 | 45.45% |
Alexey Khoroshilov | 9 | 0.73% | 1 | 9.09% |
Lars-Peter Clausen | 3 | 0.24% | 1 | 9.09% |
Grégor Boirie | 3 | 0.24% | 1 | 9.09% |
Thomas Gleixner | 2 | 0.16% | 1 | 9.09% |
Jonathan Cameron | 2 | 0.16% | 2 | 18.18% |
Total | 1241 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * adjd_s311.c - Support for ADJD-S311-CR999 digital color sensor * * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> * * driver for ADJD-S311-CR999 digital color sensor (10-bit channels for * red, green, blue, clear); 7-bit I2C slave address 0x74 * * limitations: no calibration, no offset mode, no sleep mode */ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/bitmap.h> #include <linux/err.h> #include <linux/irq.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/buffer.h> #include <linux/iio/triggered_buffer.h> #define ADJD_S311_DRV_NAME "adjd_s311" #define ADJD_S311_CTRL 0x00 #define ADJD_S311_CONFIG 0x01 #define ADJD_S311_CAP_RED 0x06 #define ADJD_S311_CAP_GREEN 0x07 #define ADJD_S311_CAP_BLUE 0x08 #define ADJD_S311_CAP_CLEAR 0x09 #define ADJD_S311_INT_RED 0x0a #define ADJD_S311_INT_GREEN 0x0c #define ADJD_S311_INT_BLUE 0x0e #define ADJD_S311_INT_CLEAR 0x10 #define ADJD_S311_DATA_RED 0x40 #define ADJD_S311_DATA_GREEN 0x42 #define ADJD_S311_DATA_BLUE 0x44 #define ADJD_S311_DATA_CLEAR 0x46 #define ADJD_S311_OFFSET_RED 0x48 #define ADJD_S311_OFFSET_GREEN 0x49 #define ADJD_S311_OFFSET_BLUE 0x4a #define ADJD_S311_OFFSET_CLEAR 0x4b #define ADJD_S311_CTRL_GOFS 0x02 #define ADJD_S311_CTRL_GSSR 0x01 #define ADJD_S311_CAP_MASK 0x0f #define ADJD_S311_INT_MASK 0x0fff #define ADJD_S311_DATA_MASK 0x03ff struct adjd_s311_data { struct i2c_client *client; u16 *buffer; }; enum adjd_s311_channel_idx { IDX_RED, IDX_GREEN, IDX_BLUE, IDX_CLEAR }; #define ADJD_S311_DATA_REG(chan) (ADJD_S311_DATA_RED + (chan) * 2) #define ADJD_S311_INT_REG(chan) (ADJD_S311_INT_RED + (chan) * 2) #define ADJD_S311_CAP_REG(chan) (ADJD_S311_CAP_RED + (chan)) static int adjd_s311_req_data(struct iio_dev *indio_dev) { struct adjd_s311_data *data = iio_priv(indio_dev); int tries = 10; int ret = i2c_smbus_write_byte_data(data->client, ADJD_S311_CTRL, ADJD_S311_CTRL_GSSR); if (ret < 0) return ret; while (tries--) { ret = i2c_smbus_read_byte_data(data->client, ADJD_S311_CTRL); if (ret < 0) return ret; if (!(ret & ADJD_S311_CTRL_GSSR)) break; msleep(20); } if (tries < 0) { dev_err(&data->client->dev, "adjd_s311_req_data() failed, data not ready\n"); return -EIO; } return 0; } static int adjd_s311_read_data(struct iio_dev *indio_dev, u8 reg, int *val) { struct adjd_s311_data *data = iio_priv(indio_dev); int ret = adjd_s311_req_data(indio_dev); if (ret < 0) return ret; ret = i2c_smbus_read_word_data(data->client, reg); if (ret < 0) return ret; *val = ret & ADJD_S311_DATA_MASK; return 0; } static irqreturn_t adjd_s311_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct adjd_s311_data *data = iio_priv(indio_dev); s64 time_ns = iio_get_time_ns(indio_dev); int i, j = 0; int ret = adjd_s311_req_data(indio_dev); if (ret < 0) goto done; for_each_set_bit(i, indio_dev->active_scan_mask, indio_dev->masklength) { ret = i2c_smbus_read_word_data(data->client, ADJD_S311_DATA_REG(i)); if (ret < 0) goto done; data->buffer[j++] = ret & ADJD_S311_DATA_MASK; } iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, time_ns); done: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } #define ADJD_S311_CHANNEL(_color, _scan_idx) { \ .type = IIO_INTENSITY, \ .modified = 1, \ .address = (IDX_##_color), \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ BIT(IIO_CHAN_INFO_INT_TIME), \ .channel2 = (IIO_MOD_LIGHT_##_color), \ .scan_index = (_scan_idx), \ .scan_type = { \ .sign = 'u', \ .realbits = 10, \ .storagebits = 16, \ .endianness = IIO_CPU, \ }, \ } static const struct iio_chan_spec adjd_s311_channels[] = { ADJD_S311_CHANNEL(RED, 0), ADJD_S311_CHANNEL(GREEN, 1), ADJD_S311_CHANNEL(BLUE, 2), ADJD_S311_CHANNEL(CLEAR, 3), IIO_CHAN_SOFT_TIMESTAMP(4), }; static int adjd_s311_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct adjd_s311_data *data = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_RAW: ret = adjd_s311_read_data(indio_dev, ADJD_S311_DATA_REG(chan->address), val); if (ret < 0) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_HARDWAREGAIN: ret = i2c_smbus_read_byte_data(data->client, ADJD_S311_CAP_REG(chan->address)); if (ret < 0) return ret; *val = ret & ADJD_S311_CAP_MASK; return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: ret = i2c_smbus_read_word_data(data->client, ADJD_S311_INT_REG(chan->address)); if (ret < 0) return ret; *val = 0; /* * not documented, based on measurement: * 4095 LSBs correspond to roughly 4 ms */ *val2 = ret & ADJD_S311_INT_MASK; return IIO_VAL_INT_PLUS_MICRO; } return -EINVAL; } static int adjd_s311_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct adjd_s311_data *data = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: if (val < 0 || val > ADJD_S311_CAP_MASK) return -EINVAL; return i2c_smbus_write_byte_data(data->client, ADJD_S311_CAP_REG(chan->address), val); case IIO_CHAN_INFO_INT_TIME: if (val != 0 || val2 < 0 || val2 > ADJD_S311_INT_MASK) return -EINVAL; return i2c_smbus_write_word_data(data->client, ADJD_S311_INT_REG(chan->address), val2); } return -EINVAL; } static int adjd_s311_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { struct adjd_s311_data *data = iio_priv(indio_dev); kfree(data->buffer); data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); if (data->buffer == NULL) return -ENOMEM; return 0; } static const struct iio_info adjd_s311_info = { .read_raw = adjd_s311_read_raw, .write_raw = adjd_s311_write_raw, .update_scan_mode = adjd_s311_update_scan_mode, }; static int adjd_s311_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adjd_s311_data *data; struct iio_dev *indio_dev; int err; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (indio_dev == NULL) return -ENOMEM; data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; indio_dev->dev.parent = &client->dev; indio_dev->info = &adjd_s311_info; indio_dev->name = ADJD_S311_DRV_NAME; indio_dev->channels = adjd_s311_channels; indio_dev->num_channels = ARRAY_SIZE(adjd_s311_channels); indio_dev->modes = INDIO_DIRECT_MODE; err = iio_triggered_buffer_setup(indio_dev, NULL, adjd_s311_trigger_handler, NULL); if (err < 0) return err; err = iio_device_register(indio_dev); if (err) goto exit_unreg_buffer; dev_info(&client->dev, "ADJD-S311 color sensor registered\n"); return 0; exit_unreg_buffer: iio_triggered_buffer_cleanup(indio_dev); return err; } static int adjd_s311_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct adjd_s311_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); iio_triggered_buffer_cleanup(indio_dev); kfree(data->buffer); return 0; } static const struct i2c_device_id adjd_s311_id[] = { { "adjd_s311", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, adjd_s311_id); static struct i2c_driver adjd_s311_driver = { .driver = { .name = ADJD_S311_DRV_NAME, }, .probe = adjd_s311_probe, .remove = adjd_s311_remove, .id_table = adjd_s311_id, }; module_i2c_driver(adjd_s311_driver); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); MODULE_DESCRIPTION("ADJD-S311 color sensor"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1