Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Patrice Chotard | 1254 | 47.45% | 5 | 23.81% |
Theodore Kilgore | 864 | 32.69% | 1 | 4.76% |
Hans Verkuil | 446 | 16.87% | 2 | 9.52% |
Joe Perches | 35 | 1.32% | 3 | 14.29% |
Hans de Goede | 19 | 0.72% | 2 | 9.52% |
Ondrej Zary | 8 | 0.30% | 1 | 4.76% |
Jean-François Moine | 7 | 0.26% | 3 | 14.29% |
Mauro Carvalho Chehab | 3 | 0.11% | 1 | 4.76% |
Tejun Heo | 3 | 0.11% | 1 | 4.76% |
Thomas Gleixner | 2 | 0.08% | 1 | 4.76% |
Greg Kroah-Hartman | 2 | 0.08% | 1 | 4.76% |
Total | 2643 | 21 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Jeilinj subdriver * * Supports some Jeilin dual-mode cameras which use bulk transport and * download raw JPEG data. * * Copyright (C) 2009 Theodore Kilgore * * Sportscam DV15 support and control settings are * Copyright (C) 2011 Patrice Chotard */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define MODULE_NAME "jeilinj" #include <linux/slab.h> #include "gspca.h" #include "jpeg.h" MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>"); MODULE_DESCRIPTION("GSPCA/JEILINJ USB Camera Driver"); MODULE_LICENSE("GPL"); /* Default timeouts, in ms */ #define JEILINJ_CMD_TIMEOUT 500 #define JEILINJ_CMD_DELAY 160 #define JEILINJ_DATA_TIMEOUT 1000 /* Maximum transfer size to use. */ #define JEILINJ_MAX_TRANSFER 0x200 #define FRAME_HEADER_LEN 0x10 #define FRAME_START 0xFFFFFFFF enum { SAKAR_57379, SPORTSCAM_DV15, }; #define CAMQUALITY_MIN 0 /* highest cam quality */ #define CAMQUALITY_MAX 97 /* lowest cam quality */ /* Structure to hold all of our device specific stuff */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ int blocks_left; const struct v4l2_pix_format *cap_mode; struct v4l2_ctrl *freq; struct v4l2_ctrl *jpegqual; /* Driver stuff */ u8 type; u8 quality; /* image quality */ #define QUALITY_MIN 35 #define QUALITY_MAX 85 #define QUALITY_DEF 85 u8 jpeg_hdr[JPEG_HDR_SZ]; }; struct jlj_command { unsigned char instruction[2]; unsigned char ack_wanted; unsigned char delay; }; /* AFAICT these cameras will only do 320x240. */ static struct v4l2_pix_format jlj_mode[] = { { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, { 640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, .sizeimage = 640 * 480, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0} }; /* * cam uses endpoint 0x03 to send commands, 0x84 for read commands, * and 0x82 for bulk transfer. */ /* All commands are two bytes only */ static void jlj_write2(struct gspca_dev *gspca_dev, unsigned char *command) { int retval; if (gspca_dev->usb_err < 0) return; memcpy(gspca_dev->usb_buf, command, 2); retval = usb_bulk_msg(gspca_dev->dev, usb_sndbulkpipe(gspca_dev->dev, 3), gspca_dev->usb_buf, 2, NULL, 500); if (retval < 0) { pr_err("command write [%02x] error %d\n", gspca_dev->usb_buf[0], retval); gspca_dev->usb_err = retval; } } /* Responses are one byte only */ static void jlj_read1(struct gspca_dev *gspca_dev, unsigned char *response) { int retval; if (gspca_dev->usb_err < 0) return; retval = usb_bulk_msg(gspca_dev->dev, usb_rcvbulkpipe(gspca_dev->dev, 0x84), gspca_dev->usb_buf, 1, NULL, 500); *response = gspca_dev->usb_buf[0]; if (retval < 0) { pr_err("read command [%02x] error %d\n", gspca_dev->usb_buf[0], retval); gspca_dev->usb_err = retval; } } static void setfreq(struct gspca_dev *gspca_dev, s32 val) { u8 freq_commands[][2] = { {0x71, 0x80}, {0x70, 0x07} }; freq_commands[0][1] |= val >> 1; jlj_write2(gspca_dev, freq_commands[0]); jlj_write2(gspca_dev, freq_commands[1]); } static void setcamquality(struct gspca_dev *gspca_dev, s32 val) { u8 quality_commands[][2] = { {0x71, 0x1E}, {0x70, 0x06} }; u8 camquality; /* adapt camera quality from jpeg quality */ camquality = ((QUALITY_MAX - val) * CAMQUALITY_MAX) / (QUALITY_MAX - QUALITY_MIN); quality_commands[0][1] += camquality; jlj_write2(gspca_dev, quality_commands[0]); jlj_write2(gspca_dev, quality_commands[1]); } static void setautogain(struct gspca_dev *gspca_dev, s32 val) { u8 autogain_commands[][2] = { {0x94, 0x02}, {0xcf, 0x00} }; autogain_commands[1][1] = val << 4; jlj_write2(gspca_dev, autogain_commands[0]); jlj_write2(gspca_dev, autogain_commands[1]); } static void setred(struct gspca_dev *gspca_dev, s32 val) { u8 setred_commands[][2] = { {0x94, 0x02}, {0xe6, 0x00} }; setred_commands[1][1] = val; jlj_write2(gspca_dev, setred_commands[0]); jlj_write2(gspca_dev, setred_commands[1]); } static void setgreen(struct gspca_dev *gspca_dev, s32 val) { u8 setgreen_commands[][2] = { {0x94, 0x02}, {0xe7, 0x00} }; setgreen_commands[1][1] = val; jlj_write2(gspca_dev, setgreen_commands[0]); jlj_write2(gspca_dev, setgreen_commands[1]); } static void setblue(struct gspca_dev *gspca_dev, s32 val) { u8 setblue_commands[][2] = { {0x94, 0x02}, {0xe9, 0x00} }; setblue_commands[1][1] = val; jlj_write2(gspca_dev, setblue_commands[0]); jlj_write2(gspca_dev, setblue_commands[1]); } static int jlj_start(struct gspca_dev *gspca_dev) { int i; int start_commands_size; u8 response = 0xff; struct sd *sd = (struct sd *) gspca_dev; struct jlj_command start_commands[] = { {{0x71, 0x81}, 0, 0}, {{0x70, 0x05}, 0, JEILINJ_CMD_DELAY}, {{0x95, 0x70}, 1, 0}, {{0x71, 0x81 - gspca_dev->curr_mode}, 0, 0}, {{0x70, 0x04}, 0, JEILINJ_CMD_DELAY}, {{0x95, 0x70}, 1, 0}, {{0x71, 0x00}, 0, 0}, /* start streaming ??*/ {{0x70, 0x08}, 0, JEILINJ_CMD_DELAY}, {{0x95, 0x70}, 1, 0}, #define SPORTSCAM_DV15_CMD_SIZE 9 {{0x94, 0x02}, 0, 0}, {{0xde, 0x24}, 0, 0}, {{0x94, 0x02}, 0, 0}, {{0xdd, 0xf0}, 0, 0}, {{0x94, 0x02}, 0, 0}, {{0xe3, 0x2c}, 0, 0}, {{0x94, 0x02}, 0, 0}, {{0xe4, 0x00}, 0, 0}, {{0x94, 0x02}, 0, 0}, {{0xe5, 0x00}, 0, 0}, {{0x94, 0x02}, 0, 0}, {{0xe6, 0x2c}, 0, 0}, {{0x94, 0x03}, 0, 0}, {{0xaa, 0x00}, 0, 0} }; sd->blocks_left = 0; /* Under Windows, USB spy shows that only the 9 first start * commands are used for SPORTSCAM_DV15 webcam */ if (sd->type == SPORTSCAM_DV15) start_commands_size = SPORTSCAM_DV15_CMD_SIZE; else start_commands_size = ARRAY_SIZE(start_commands); for (i = 0; i < start_commands_size; i++) { jlj_write2(gspca_dev, start_commands[i].instruction); if (start_commands[i].delay) msleep(start_commands[i].delay); if (start_commands[i].ack_wanted) jlj_read1(gspca_dev, &response); } setcamquality(gspca_dev, v4l2_ctrl_g_ctrl(sd->jpegqual)); msleep(2); setfreq(gspca_dev, v4l2_ctrl_g_ctrl(sd->freq)); if (gspca_dev->usb_err < 0) gspca_err(gspca_dev, "Start streaming command failed\n"); return gspca_dev->usb_err; } static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len) { struct sd *sd = (struct sd *) gspca_dev; int packet_type; u32 header_marker; gspca_dbg(gspca_dev, D_STREAM, "Got %d bytes out of %d for Block 0\n", len, JEILINJ_MAX_TRANSFER); if (len != JEILINJ_MAX_TRANSFER) { gspca_dbg(gspca_dev, D_PACK, "bad length\n"); goto discard; } /* check if it's start of frame */ header_marker = ((u32 *)data)[0]; if (header_marker == FRAME_START) { sd->blocks_left = data[0x0a] - 1; gspca_dbg(gspca_dev, D_STREAM, "blocks_left = 0x%x\n", sd->blocks_left); /* Start a new frame, and add the JPEG header, first thing */ gspca_frame_add(gspca_dev, FIRST_PACKET, sd->jpeg_hdr, JPEG_HDR_SZ); /* Toss line 0 of data block 0, keep the rest. */ gspca_frame_add(gspca_dev, INTER_PACKET, data + FRAME_HEADER_LEN, JEILINJ_MAX_TRANSFER - FRAME_HEADER_LEN); } else if (sd->blocks_left > 0) { gspca_dbg(gspca_dev, D_STREAM, "%d blocks remaining for frame\n", sd->blocks_left); sd->blocks_left -= 1; if (sd->blocks_left == 0) packet_type = LAST_PACKET; else packet_type = INTER_PACKET; gspca_frame_add(gspca_dev, packet_type, data, JEILINJ_MAX_TRANSFER); } else goto discard; return; discard: /* Discard data until a new frame starts. */ gspca_dev->last_packet_type = DISCARD_PACKET; } /* This function is called at probe time just before sd_init */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct cam *cam = &gspca_dev->cam; struct sd *dev = (struct sd *) gspca_dev; dev->type = id->driver_info; dev->quality = QUALITY_DEF; cam->cam_mode = jlj_mode; cam->nmodes = ARRAY_SIZE(jlj_mode); cam->bulk = 1; cam->bulk_nurbs = 1; cam->bulk_size = JEILINJ_MAX_TRANSFER; return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) { int i; u8 *buf; static u8 stop_commands[][2] = { {0x71, 0x00}, {0x70, 0x09}, {0x71, 0x80}, {0x70, 0x05} }; for (;;) { /* get the image remaining blocks */ usb_bulk_msg(gspca_dev->dev, gspca_dev->urb[0]->pipe, gspca_dev->urb[0]->transfer_buffer, JEILINJ_MAX_TRANSFER, NULL, JEILINJ_DATA_TIMEOUT); /* search for 0xff 0xd9 (EOF for JPEG) */ i = 0; buf = gspca_dev->urb[0]->transfer_buffer; while ((i < (JEILINJ_MAX_TRANSFER - 1)) && ((buf[i] != 0xff) || (buf[i+1] != 0xd9))) i++; if (i != (JEILINJ_MAX_TRANSFER - 1)) /* last remaining block found */ break; } for (i = 0; i < ARRAY_SIZE(stop_commands); i++) jlj_write2(gspca_dev, stop_commands[i]); } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { return gspca_dev->usb_err; } /* Set up for getting frames. */ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *dev = (struct sd *) gspca_dev; /* create the JPEG header */ jpeg_define(dev->jpeg_hdr, gspca_dev->pixfmt.height, gspca_dev->pixfmt.width, 0x21); /* JPEG 422 */ jpeg_set_qual(dev->jpeg_hdr, dev->quality); gspca_dbg(gspca_dev, D_STREAM, "Start streaming at %dx%d\n", gspca_dev->pixfmt.height, gspca_dev->pixfmt.width); jlj_start(gspca_dev); return gspca_dev->usb_err; } /* Table of supported USB devices */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0280), .driver_info = SAKAR_57379}, {USB_DEVICE(0x0979, 0x0270), .driver_info = SPORTSCAM_DV15}, {} }; MODULE_DEVICE_TABLE(usb, device_table); static int sd_s_ctrl(struct v4l2_ctrl *ctrl) { struct gspca_dev *gspca_dev = container_of(ctrl->handler, struct gspca_dev, ctrl_handler); struct sd *sd = (struct sd *)gspca_dev; gspca_dev->usb_err = 0; if (!gspca_dev->streaming) return 0; switch (ctrl->id) { case V4L2_CID_POWER_LINE_FREQUENCY: setfreq(gspca_dev, ctrl->val); break; case V4L2_CID_RED_BALANCE: setred(gspca_dev, ctrl->val); break; case V4L2_CID_GAIN: setgreen(gspca_dev, ctrl->val); break; case V4L2_CID_BLUE_BALANCE: setblue(gspca_dev, ctrl->val); break; case V4L2_CID_AUTOGAIN: setautogain(gspca_dev, ctrl->val); break; case V4L2_CID_JPEG_COMPRESSION_QUALITY: jpeg_set_qual(sd->jpeg_hdr, ctrl->val); setcamquality(gspca_dev, ctrl->val); break; } return gspca_dev->usb_err; } static const struct v4l2_ctrl_ops sd_ctrl_ops = { .s_ctrl = sd_s_ctrl, }; static int sd_init_controls(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *)gspca_dev; struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; static const struct v4l2_ctrl_config custom_autogain = { .ops = &sd_ctrl_ops, .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Automatic Gain (and Exposure)", .max = 3, .step = 1, .def = 0, }; gspca_dev->vdev.ctrl_handler = hdl; v4l2_ctrl_handler_init(hdl, 6); sd->freq = v4l2_ctrl_new_std_menu(hdl, &sd_ctrl_ops, V4L2_CID_POWER_LINE_FREQUENCY, V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 1, V4L2_CID_POWER_LINE_FREQUENCY_60HZ); v4l2_ctrl_new_custom(hdl, &custom_autogain, NULL); v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_RED_BALANCE, 0, 3, 1, 2); v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_GAIN, 0, 3, 1, 2); v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_BLUE_BALANCE, 0, 3, 1, 2); sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_JPEG_COMPRESSION_QUALITY, QUALITY_MIN, QUALITY_MAX, 1, QUALITY_DEF); if (hdl->error) { pr_err("Could not initialize controls\n"); return hdl->error; } return 0; } static int sd_set_jcomp(struct gspca_dev *gspca_dev, const struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; v4l2_ctrl_s_ctrl(sd->jpegqual, jcomp->quality); return 0; } static int sd_get_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; memset(jcomp, 0, sizeof *jcomp); jcomp->quality = v4l2_ctrl_g_ctrl(sd->jpegqual); jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT; return 0; } /* sub-driver description */ static const struct sd_desc sd_desc_sakar_57379 = { .name = MODULE_NAME, .config = sd_config, .init = sd_init, .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, }; /* sub-driver description */ static const struct sd_desc sd_desc_sportscam_dv15 = { .name = MODULE_NAME, .config = sd_config, .init = sd_init, .init_controls = sd_init_controls, .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, }; static const struct sd_desc *sd_desc[2] = { &sd_desc_sakar_57379, &sd_desc_sportscam_dv15 }; /* -- device connect -- */ static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, sd_desc[id->driver_info], sizeof(struct sd), THIS_MODULE); } static struct usb_driver sd_driver = { .name = MODULE_NAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, #ifdef CONFIG_PM .suspend = gspca_suspend, .resume = gspca_resume, .reset_resume = gspca_resume, #endif }; module_usb_driver(sd_driver);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1