Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Richard Fitzgerald | 2742 | 98.21% | 5 | 55.56% |
Charles Keepax | 41 | 1.47% | 2 | 22.22% |
Daniel Gomez | 7 | 0.25% | 1 | 11.11% |
Stuart Henderson | 2 | 0.07% | 1 | 11.11% |
Total | 2792 | 9 |
// SPDX-License-Identifier: GPL-2.0-only /* * Core MFD support for Cirrus Logic Madera codecs * * Copyright (C) 2015-2018 Cirrus Logic */ #include <linux/device.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/mfd/core.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/notifier.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> #include <linux/mfd/madera/core.h> #include <linux/mfd/madera/registers.h> #include "madera.h" #define CS47L15_SILICON_ID 0x6370 #define CS47L35_SILICON_ID 0x6360 #define CS47L85_SILICON_ID 0x6338 #define CS47L90_SILICON_ID 0x6364 #define CS47L92_SILICON_ID 0x6371 #define MADERA_32KZ_MCLK2 1 static const char * const madera_core_supplies[] = { "AVDD", "DBVDD1", }; static const struct mfd_cell madera_ldo1_devs[] = { { .name = "madera-ldo1" }, }; static const char * const cs47l15_supplies[] = { "MICVDD", "CPVDD1", "SPKVDD", }; static const struct mfd_cell cs47l15_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq" }, { .name = "madera-gpio" }, { .name = "madera-extcon", .parent_supplies = cs47l15_supplies, .num_parent_supplies = 1, /* We only need MICVDD */ }, { .name = "cs47l15-codec", .parent_supplies = cs47l15_supplies, .num_parent_supplies = ARRAY_SIZE(cs47l15_supplies), }, }; static const char * const cs47l35_supplies[] = { "MICVDD", "DBVDD2", "CPVDD1", "CPVDD2", "SPKVDD", }; static const struct mfd_cell cs47l35_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq", }, { .name = "madera-micsupp", }, { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l35_supplies, .num_parent_supplies = 1, /* We only need MICVDD */ }, { .name = "cs47l35-codec", .parent_supplies = cs47l35_supplies, .num_parent_supplies = ARRAY_SIZE(cs47l35_supplies), }, }; static const char * const cs47l85_supplies[] = { "MICVDD", "DBVDD2", "DBVDD3", "DBVDD4", "CPVDD1", "CPVDD2", "SPKVDDL", "SPKVDDR", }; static const struct mfd_cell cs47l85_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq", }, { .name = "madera-micsupp" }, { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l85_supplies, .num_parent_supplies = 1, /* We only need MICVDD */ }, { .name = "cs47l85-codec", .parent_supplies = cs47l85_supplies, .num_parent_supplies = ARRAY_SIZE(cs47l85_supplies), }, }; static const char * const cs47l90_supplies[] = { "MICVDD", "DBVDD2", "DBVDD3", "DBVDD4", "CPVDD1", "CPVDD2", }; static const struct mfd_cell cs47l90_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq", }, { .name = "madera-micsupp", }, { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l90_supplies, .num_parent_supplies = 1, /* We only need MICVDD */ }, { .name = "cs47l90-codec", .parent_supplies = cs47l90_supplies, .num_parent_supplies = ARRAY_SIZE(cs47l90_supplies), }, }; static const char * const cs47l92_supplies[] = { "MICVDD", "CPVDD1", "CPVDD2", }; static const struct mfd_cell cs47l92_devs[] = { { .name = "madera-pinctrl" }, { .name = "madera-irq", }, { .name = "madera-micsupp", }, { .name = "madera-gpio" }, { .name = "madera-extcon", .parent_supplies = cs47l92_supplies, .num_parent_supplies = 1, /* We only need MICVDD */ }, { .name = "cs47l92-codec", .parent_supplies = cs47l92_supplies, .num_parent_supplies = ARRAY_SIZE(cs47l92_supplies), }, }; /* Used by madera-i2c and madera-spi drivers */ const char *madera_name_from_type(enum madera_type type) { switch (type) { case CS47L15: return "CS47L15"; case CS47L35: return "CS47L35"; case CS47L85: return "CS47L85"; case CS47L90: return "CS47L90"; case CS47L91: return "CS47L91"; case CS42L92: return "CS42L92"; case CS47L92: return "CS47L92"; case CS47L93: return "CS47L93"; case WM1840: return "WM1840"; default: return "Unknown"; } } EXPORT_SYMBOL_GPL(madera_name_from_type); #define MADERA_BOOT_POLL_INTERVAL_USEC 5000 #define MADERA_BOOT_POLL_TIMEOUT_USEC 25000 static int madera_wait_for_boot(struct madera *madera) { ktime_t timeout; unsigned int val = 0; int ret = 0; /* * We can't use an interrupt as we need to runtime resume to do so, * so we poll the status bit. This won't race with the interrupt * handler because it will be blocked on runtime resume. * The chip could NAK a read request while it is booting so ignore * errors from regmap_read. */ timeout = ktime_add_us(ktime_get(), MADERA_BOOT_POLL_TIMEOUT_USEC); regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val); while (!(val & MADERA_BOOT_DONE_STS1) && !ktime_after(ktime_get(), timeout)) { usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2, MADERA_BOOT_POLL_INTERVAL_USEC); regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val); } if (!(val & MADERA_BOOT_DONE_STS1)) { dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n"); ret = -ETIMEDOUT; } /* * BOOT_DONE defaults to unmasked on boot so we must ack it. * Do this even after a timeout to avoid interrupt storms. */ regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1, MADERA_BOOT_DONE_EINT1); pm_runtime_mark_last_busy(madera->dev); return ret; } static int madera_soft_reset(struct madera *madera) { int ret; ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0); if (ret != 0) { dev_err(madera->dev, "Failed to soft reset device: %d\n", ret); return ret; } /* Allow time for internal clocks to startup after reset */ usleep_range(1000, 2000); return 0; } static void madera_enable_hard_reset(struct madera *madera) { if (!madera->pdata.reset) return; /* * There are many existing out-of-tree users of these codecs that we * can't break so preserve the expected behaviour of setting the line * low to assert reset. */ gpiod_set_raw_value_cansleep(madera->pdata.reset, 0); } static void madera_disable_hard_reset(struct madera *madera) { if (!madera->pdata.reset) return; gpiod_set_raw_value_cansleep(madera->pdata.reset, 1); usleep_range(1000, 2000); } static int __maybe_unused madera_runtime_resume(struct device *dev) { struct madera *madera = dev_get_drvdata(dev); int ret; dev_dbg(dev, "Leaving sleep mode\n"); ret = regulator_enable(madera->dcvdd); if (ret) { dev_err(dev, "Failed to enable DCVDD: %d\n", ret); return ret; } regcache_cache_only(madera->regmap, false); regcache_cache_only(madera->regmap_32bit, false); ret = madera_wait_for_boot(madera); if (ret) goto err; ret = regcache_sync(madera->regmap); if (ret) { dev_err(dev, "Failed to restore 16-bit register cache\n"); goto err; } ret = regcache_sync(madera->regmap_32bit); if (ret) { dev_err(dev, "Failed to restore 32-bit register cache\n"); goto err; } return 0; err: regcache_cache_only(madera->regmap_32bit, true); regcache_cache_only(madera->regmap, true); regulator_disable(madera->dcvdd); return ret; } static int __maybe_unused madera_runtime_suspend(struct device *dev) { struct madera *madera = dev_get_drvdata(dev); dev_dbg(madera->dev, "Entering sleep mode\n"); regcache_cache_only(madera->regmap, true); regcache_mark_dirty(madera->regmap); regcache_cache_only(madera->regmap_32bit, true); regcache_mark_dirty(madera->regmap_32bit); regulator_disable(madera->dcvdd); return 0; } const struct dev_pm_ops madera_pm_ops = { SET_RUNTIME_PM_OPS(madera_runtime_suspend, madera_runtime_resume, NULL) }; EXPORT_SYMBOL_GPL(madera_pm_ops); const struct of_device_id madera_of_match[] = { { .compatible = "cirrus,cs47l15", .data = (void *)CS47L15 }, { .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 }, { .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 }, { .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 }, { .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 }, { .compatible = "cirrus,cs42l92", .data = (void *)CS42L92 }, { .compatible = "cirrus,cs47l92", .data = (void *)CS47L92 }, { .compatible = "cirrus,cs47l93", .data = (void *)CS47L93 }, { .compatible = "cirrus,wm1840", .data = (void *)WM1840 }, {} }; MODULE_DEVICE_TABLE(of, madera_of_match); EXPORT_SYMBOL_GPL(madera_of_match); static int madera_get_reset_gpio(struct madera *madera) { struct gpio_desc *reset; int ret; if (madera->pdata.reset) return 0; reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(reset)) { ret = PTR_ERR(reset); if (ret != -EPROBE_DEFER) dev_err(madera->dev, "Failed to request /RESET: %d\n", ret); return ret; } /* * A hard reset is needed for full reset of the chip. We allow running * without hard reset only because it can be useful for early * prototyping and some debugging, but we need to warn it's not ideal. */ if (!reset) dev_warn(madera->dev, "Running without reset GPIO is not recommended\n"); madera->pdata.reset = reset; return 0; } static void madera_set_micbias_info(struct madera *madera) { /* * num_childbias is an array because future codecs can have different * childbiases for each micbias. Unspecified values default to 0. */ switch (madera->type) { case CS47L15: madera->num_micbias = 1; madera->num_childbias[0] = 3; return; case CS47L35: madera->num_micbias = 2; madera->num_childbias[0] = 2; madera->num_childbias[1] = 2; return; case CS47L85: case WM1840: madera->num_micbias = 4; /* no child biases */ return; case CS47L90: case CS47L91: madera->num_micbias = 2; madera->num_childbias[0] = 4; madera->num_childbias[1] = 4; return; case CS42L92: case CS47L92: case CS47L93: madera->num_micbias = 2; madera->num_childbias[0] = 4; madera->num_childbias[1] = 2; return; default: return; } } int madera_dev_init(struct madera *madera) { struct device *dev = madera->dev; unsigned int hwid; int (*patch_fn)(struct madera *) = NULL; const struct mfd_cell *mfd_devs; int n_devs = 0; int i, ret; dev_set_drvdata(madera->dev, madera); BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier); mutex_init(&madera->dapm_ptr_lock); madera_set_micbias_info(madera); /* * We need writable hw config info that all children can share. * Simplest to take one shared copy of pdata struct. */ if (dev_get_platdata(madera->dev)) { memcpy(&madera->pdata, dev_get_platdata(madera->dev), sizeof(madera->pdata)); } ret = madera_get_reset_gpio(madera); if (ret) return ret; regcache_cache_only(madera->regmap, true); regcache_cache_only(madera->regmap_32bit, true); for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++) madera->core_supplies[i].supply = madera_core_supplies[i]; madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies); /* * On some codecs DCVDD could be supplied by the internal LDO1. * For those we must add the LDO1 driver before requesting DCVDD * No devm_ because we need to control shutdown order of children. */ switch (madera->type) { case CS47L15: case CS47L35: case CS47L90: case CS47L91: case CS42L92: case CS47L92: case CS47L93: break; case CS47L85: case WM1840: ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE, madera_ldo1_devs, ARRAY_SIZE(madera_ldo1_devs), NULL, 0, NULL); if (ret) { dev_err(dev, "Failed to add LDO1 child: %d\n", ret); return ret; } break; default: /* No point continuing if the type is unknown */ dev_err(madera->dev, "Unknown device type %d\n", madera->type); return -ENODEV; } ret = devm_regulator_bulk_get(dev, madera->num_core_supplies, madera->core_supplies); if (ret) { dev_err(dev, "Failed to request core supplies: %d\n", ret); goto err_devs; } /* * Don't use devres here. If the regulator is one of our children it * will already have been removed before devres cleanup on this mfd * driver tries to call put() on it. We need control of shutdown order. */ madera->dcvdd = regulator_get(madera->dev, "DCVDD"); if (IS_ERR(madera->dcvdd)) { ret = PTR_ERR(madera->dcvdd); dev_err(dev, "Failed to request DCVDD: %d\n", ret); goto err_devs; } ret = regulator_bulk_enable(madera->num_core_supplies, madera->core_supplies); if (ret) { dev_err(dev, "Failed to enable core supplies: %d\n", ret); goto err_dcvdd; } ret = regulator_enable(madera->dcvdd); if (ret) { dev_err(dev, "Failed to enable DCVDD: %d\n", ret); goto err_enable; } madera_disable_hard_reset(madera); regcache_cache_only(madera->regmap, false); regcache_cache_only(madera->regmap_32bit, false); /* * Now we can power up and verify that this is a chip we know about * before we start doing any writes to its registers. */ ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid); if (ret) { dev_err(dev, "Failed to read ID register: %d\n", ret); goto err_reset; } switch (hwid) { case CS47L15_SILICON_ID: if (IS_ENABLED(CONFIG_MFD_CS47L15)) { switch (madera->type) { case CS47L15: patch_fn = &cs47l15_patch; mfd_devs = cs47l15_devs; n_devs = ARRAY_SIZE(cs47l15_devs); break; default: break; } } break; case CS47L35_SILICON_ID: if (IS_ENABLED(CONFIG_MFD_CS47L35)) { switch (madera->type) { case CS47L35: patch_fn = cs47l35_patch; mfd_devs = cs47l35_devs; n_devs = ARRAY_SIZE(cs47l35_devs); break; default: break; } } break; case CS47L85_SILICON_ID: if (IS_ENABLED(CONFIG_MFD_CS47L85)) { switch (madera->type) { case CS47L85: case WM1840: patch_fn = cs47l85_patch; mfd_devs = cs47l85_devs; n_devs = ARRAY_SIZE(cs47l85_devs); break; default: break; } } break; case CS47L90_SILICON_ID: if (IS_ENABLED(CONFIG_MFD_CS47L90)) { switch (madera->type) { case CS47L90: case CS47L91: patch_fn = cs47l90_patch; mfd_devs = cs47l90_devs; n_devs = ARRAY_SIZE(cs47l90_devs); break; default: break; } } break; case CS47L92_SILICON_ID: if (IS_ENABLED(CONFIG_MFD_CS47L92)) { switch (madera->type) { case CS42L92: case CS47L92: case CS47L93: patch_fn = cs47l92_patch; mfd_devs = cs47l92_devs; n_devs = ARRAY_SIZE(cs47l92_devs); break; default: break; } } break; default: dev_err(madera->dev, "Unknown device ID: %x\n", hwid); ret = -EINVAL; goto err_reset; } if (!n_devs) { dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, madera->type_name); ret = -ENODEV; goto err_reset; } /* * It looks like a device we support. If we don't have a hard reset * we can now attempt a soft reset. */ if (!madera->pdata.reset) { ret = madera_soft_reset(madera); if (ret) goto err_reset; } ret = madera_wait_for_boot(madera); if (ret) { dev_err(madera->dev, "Device failed initial boot: %d\n", ret); goto err_reset; } ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION, &madera->rev); if (ret) { dev_err(dev, "Failed to read revision register: %d\n", ret); goto err_reset; } madera->rev &= MADERA_HW_REVISION_MASK; dev_info(dev, "%s silicon revision %d\n", madera->type_name, madera->rev); /* Apply hardware patch */ if (patch_fn) { ret = patch_fn(madera); if (ret) { dev_err(madera->dev, "Failed to apply patch %d\n", ret); goto err_reset; } } /* Init 32k clock sourced from MCLK2 */ ret = regmap_update_bits(madera->regmap, MADERA_CLOCK_32K_1, MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK, MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2); if (ret) { dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret); goto err_reset; } pm_runtime_set_active(madera->dev); pm_runtime_enable(madera->dev); pm_runtime_set_autosuspend_delay(madera->dev, 100); pm_runtime_use_autosuspend(madera->dev); /* No devm_ because we need to control shutdown order of children */ ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE, mfd_devs, n_devs, NULL, 0, NULL); if (ret) { dev_err(madera->dev, "Failed to add subdevices: %d\n", ret); goto err_pm_runtime; } return 0; err_pm_runtime: pm_runtime_disable(madera->dev); err_reset: madera_enable_hard_reset(madera); regulator_disable(madera->dcvdd); err_enable: regulator_bulk_disable(madera->num_core_supplies, madera->core_supplies); err_dcvdd: regulator_put(madera->dcvdd); err_devs: mfd_remove_devices(dev); return ret; } EXPORT_SYMBOL_GPL(madera_dev_init); int madera_dev_exit(struct madera *madera) { /* Prevent any IRQs being serviced while we clean up */ disable_irq(madera->irq); /* * DCVDD could be supplied by a child node, we must disable it before * removing the children, and prevent PM runtime from turning it back on */ pm_runtime_disable(madera->dev); regulator_disable(madera->dcvdd); regulator_put(madera->dcvdd); mfd_remove_devices(madera->dev); madera_enable_hard_reset(madera); regulator_bulk_disable(madera->num_core_supplies, madera->core_supplies); return 0; } EXPORT_SYMBOL_GPL(madera_dev_exit); MODULE_DESCRIPTION("Madera core MFD driver"); MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1