Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Divy Le Ray | 1836 | 99.95% | 3 | 75.00% |
Uwe Kleine-König | 1 | 0.05% | 1 | 25.00% |
Total | 1837 | 4 |
/* * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include "common.h" #include "regs.h" enum { IDT75P52100 = 4, IDT75N43102 = 5 }; /* DBGI command mode */ enum { DBGI_MODE_MBUS = 0, DBGI_MODE_IDT52100 = 5 }; /* IDT 75P52100 commands */ #define IDT_CMD_READ 0 #define IDT_CMD_WRITE 1 #define IDT_CMD_SEARCH 2 #define IDT_CMD_LEARN 3 /* IDT LAR register address and value for 144-bit mode (low 32 bits) */ #define IDT_LAR_ADR0 0x180006 #define IDT_LAR_MODE144 0xffff0000 /* IDT SCR and SSR addresses (low 32 bits) */ #define IDT_SCR_ADR0 0x180000 #define IDT_SSR0_ADR0 0x180002 #define IDT_SSR1_ADR0 0x180004 /* IDT GMR base address (low 32 bits) */ #define IDT_GMR_BASE_ADR0 0x180020 /* IDT data and mask array base addresses (low 32 bits) */ #define IDT_DATARY_BASE_ADR0 0 #define IDT_MSKARY_BASE_ADR0 0x80000 /* IDT 75N43102 commands */ #define IDT4_CMD_SEARCH144 3 #define IDT4_CMD_WRITE 4 #define IDT4_CMD_READ 5 /* IDT 75N43102 SCR address (low 32 bits) */ #define IDT4_SCR_ADR0 0x3 /* IDT 75N43102 GMR base addresses (low 32 bits) */ #define IDT4_GMR_BASE0 0x10 #define IDT4_GMR_BASE1 0x20 #define IDT4_GMR_BASE2 0x30 /* IDT 75N43102 data and mask array base addresses (low 32 bits) */ #define IDT4_DATARY_BASE_ADR0 0x1000000 #define IDT4_MSKARY_BASE_ADR0 0x2000000 #define MAX_WRITE_ATTEMPTS 5 #define MAX_ROUTES 2048 /* * Issue a command to the TCAM and wait for its completion. The address and * any data required by the command must have been setup by the caller. */ static int mc5_cmd_write(struct adapter *adapter, u32 cmd) { t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd); return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS, F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1); } static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2, u32 v3) { t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1); t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2); t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3); } /* * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM * command cmd. The data to be written must have been set up by the caller. * Returns -1 on failure, 0 on success. */ static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd) { t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo); if (mc5_cmd_write(adapter, cmd) == 0) return 0; CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n", addr_lo); return -1; } static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base, u32 data_array_base, u32 write_cmd, int addr_shift) { unsigned int i; struct adapter *adap = mc5->adapter; /* * We need the size of the TCAM data and mask arrays in terms of * 72-bit entries. */ unsigned int size72 = mc5->tcam_size; unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX); if (mc5->mode == MC5_MODE_144_BIT) { size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */ server_base *= 2; } /* Clear the data array */ dbgi_wr_data3(adap, 0, 0, 0); for (i = 0; i < size72; i++) if (mc5_write(adap, data_array_base + (i << addr_shift), write_cmd)) return -1; /* Initialize the mask array. */ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); for (i = 0; i < size72; i++) { if (i == server_base) /* entering server or routing region */ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0, mc5->mode == MC5_MODE_144_BIT ? 0xfffffff9 : 0xfffffffd); if (mc5_write(adap, mask_array_base + (i << addr_shift), write_cmd)) return -1; } return 0; } static int init_idt52100(struct mc5 *mc5) { int i; struct adapter *adap = mc5->adapter; t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15)); t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2); /* * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and * GMRs 8-9 for ACK- and AOPEN searches. */ t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH); t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN); t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000); t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN); t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH); t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN); t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH); t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000); t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ); /* Set DBGI command mode for IDT TCAM. */ t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); /* Set up LAR */ dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0); if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE)) goto err; /* Set up SSRs */ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0); if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) || mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE)) goto err; /* Set up GMRs */ for (i = 0; i < 32; ++i) { if (i >= 12 && i < 15) dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); else if (i == 15) dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); else dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE)) goto err; } /* Set up SCR */ dbgi_wr_data3(adap, 1, 0, 0); if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE)) goto err; return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0, IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0); err: return -EIO; } static int init_idt43102(struct mc5 *mc5) { int i; struct adapter *adap = mc5->adapter; t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) : V_RDLAT(0xd) | V_SRCHLAT(0x12)); /* * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask * for ACK- and AOPEN searches. */ t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800); t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144); t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800); t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800); t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800); t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE); t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ); t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3); /* Set DBGI command mode for IDT TCAM. */ t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); /* Set up GMRs */ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); for (i = 0; i < 7; ++i) if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE)) goto err; for (i = 0; i < 4; ++i) if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE)) goto err; dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) || mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) || mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE)) goto err; dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE)) goto err; /* Set up SCR */ dbgi_wr_data3(adap, 0xf0000000, 0, 0); if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE)) goto err; return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0, IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1); err: return -EIO; } /* Put MC5 in DBGI mode. */ static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5) { t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN); } /* Put MC5 in M-Bus mode. */ static void mc5_dbgi_mode_disable(const struct mc5 *mc5) { t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | V_COMPEN(mc5->mode == MC5_MODE_72_BIT) | V_PRTYEN(mc5->parity_enabled) | F_MBUSEN); } /* * Initialization that requires the OS and protocol layers to already * be initialized goes here. */ int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, unsigned int nroutes) { u32 cfg; int err; unsigned int tcam_size = mc5->tcam_size; struct adapter *adap = mc5->adapter; if (!tcam_size) return 0; if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size) return -EINVAL; /* Reset the TCAM */ cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE; cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST; t3_write_reg(adap, A_MC5_DB_CONFIG, cfg); if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) { CH_ERR(adap, "TCAM reset timed out\n"); return -1; } t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes); t3_write_reg(adap, A_MC5_DB_FILTER_TABLE, tcam_size - nroutes - nfilters); t3_write_reg(adap, A_MC5_DB_SERVER_INDEX, tcam_size - nroutes - nfilters - nservers); mc5->parity_enabled = 1; /* All the TCAM addresses we access have only the low 32 bits non 0 */ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0); t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0); mc5_dbgi_mode_enable(mc5); switch (mc5->part_type) { case IDT75P52100: err = init_idt52100(mc5); break; case IDT75N43102: err = init_idt43102(mc5); break; default: CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type); err = -EINVAL; break; } mc5_dbgi_mode_disable(mc5); return err; } #define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR) /* * MC5 interrupt handler */ void t3_mc5_intr_handler(struct mc5 *mc5) { struct adapter *adap = mc5->adapter; u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE); if ((cause & F_PARITYERR) && mc5->parity_enabled) { CH_ALERT(adap, "MC5 parity error\n"); mc5->stats.parity_err++; } if (cause & F_REQQPARERR) { CH_ALERT(adap, "MC5 request queue parity error\n"); mc5->stats.reqq_parity_err++; } if (cause & F_DISPQPARERR) { CH_ALERT(adap, "MC5 dispatch queue parity error\n"); mc5->stats.dispq_parity_err++; } if (cause & F_ACTRGNFULL) mc5->stats.active_rgn_full++; if (cause & F_NFASRCHFAIL) mc5->stats.nfa_srch_err++; if (cause & F_UNKNOWNCMD) mc5->stats.unknown_cmd++; if (cause & F_DELACTEMPTY) mc5->stats.del_act_empty++; if (cause & MC5_INT_FATAL) t3_fatal_err(adap); t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause); } void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode) { #define K * 1024 static unsigned int tcam_part_size[] = { /* in K 72-bit entries */ 64 K, 128 K, 256 K, 32 K }; #undef K u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG); mc5->adapter = adapter; mc5->mode = (unsigned char)mode; mc5->part_type = (unsigned char)G_TMTYPE(cfg); if (cfg & F_TMTYPEHI) mc5->part_type |= 4; mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)]; if (mode == MC5_MODE_144_BIT) mc5->tcam_size /= 2; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1