| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Timur Tabi | 1053 | 99.81% | 2 | 66.67% |
| Thomas Gleixner | 2 | 0.19% | 1 | 33.33% |
| Total | 1055 | 3 |
// SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. */ /* Qualcomm Technologies, Inc. FSM9900 EMAC SGMII Controller driver. */ #include <linux/iopoll.h> #include "emac.h" /* EMAC_QSERDES register offsets */ #define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x0000 #define EMAC_QSERDES_COM_PLL_CNTRL 0x0014 #define EMAC_QSERDES_COM_PLL_IP_SETI 0x0018 #define EMAC_QSERDES_COM_PLL_CP_SETI 0x0024 #define EMAC_QSERDES_COM_PLL_IP_SETP 0x0028 #define EMAC_QSERDES_COM_PLL_CP_SETP 0x002c #define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x0038 #define EMAC_QSERDES_COM_RESETSM_CNTRL 0x0040 #define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x0044 #define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x0048 #define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x004c #define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x0050 #define EMAC_QSERDES_COM_DEC_START1 0x0064 #define EMAC_QSERDES_COM_DIV_FRAC_START1 0x0098 #define EMAC_QSERDES_COM_DIV_FRAC_START2 0x009c #define EMAC_QSERDES_COM_DIV_FRAC_START3 0x00a0 #define EMAC_QSERDES_COM_DEC_START2 0x00a4 #define EMAC_QSERDES_COM_PLL_CRCTRL 0x00ac #define EMAC_QSERDES_COM_RESET_SM 0x00bc #define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x0100 #define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x0108 #define EMAC_QSERDES_TX_TX_DRV_LVL 0x010c #define EMAC_QSERDES_TX_LANE_MODE 0x0150 #define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x0170 #define EMAC_QSERDES_RX_CDR_CONTROL 0x0200 #define EMAC_QSERDES_RX_CDR_CONTROL2 0x0210 #define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x0230 /* EMAC_SGMII register offsets */ #define EMAC_SGMII_PHY_SERDES_START 0x0000 #define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x0004 #define EMAC_SGMII_PHY_RX_PWR_CTRL 0x0008 #define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C #define EMAC_SGMII_PHY_LANE_CTRL1 0x0018 #define EMAC_SGMII_PHY_CDR_CTRL0 0x0058 #define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080 #define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4 #define PLL_IPSETI(x) ((x) & 0x3f) #define PLL_CPSETI(x) ((x) & 0xff) #define PLL_IPSETP(x) ((x) & 0x3f) #define PLL_CPSETP(x) ((x) & 0x1f) #define PLL_RCTRL(x) (((x) & 0xf) << 4) #define PLL_CCTRL(x) ((x) & 0xf) #define LANE_MODE(x) ((x) & 0x1f) #define SYSCLK_CM BIT(4) #define SYSCLK_AC_COUPLE BIT(3) #define OCP_EN BIT(5) #define PLL_DIV_FFEN BIT(2) #define PLL_DIV_ORD BIT(1) #define SYSCLK_SEL_CMOS BIT(3) #define FRQ_TUNE_MODE BIT(4) #define PLLLOCK_CMP_EN BIT(0) #define DEC_START1_MUX BIT(7) #define DEC_START1(x) ((x) & 0x7f) #define DIV_FRAC_START_MUX BIT(7) #define DIV_FRAC_START(x) ((x) & 0x7f) #define DIV_FRAC_START3_MUX BIT(4) #define DIV_FRAC_START3(x) ((x) & 0xf) #define DEC_START2_MUX BIT(1) #define DEC_START2 BIT(0) #define READY BIT(5) #define TX_EMP_POST1_LVL_MUX BIT(5) #define TX_EMP_POST1_LVL(x) ((x) & 0x1f) #define TX_DRV_LVL_MUX BIT(4) #define TX_DRV_LVL(x) ((x) & 0xf) #define EMP_EN_MUX BIT(1) #define EMP_EN BIT(0) #define SECONDORDERENABLE BIT(6) #define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3) #define SECONDORDERGAIN(x) ((x) & 0x7) #define RX_EQ_GAIN2(x) (((x) & 0xf) << 4) #define RX_EQ_GAIN1(x) ((x) & 0xf) #define SERDES_START BIT(0) #define BIAS_EN BIT(6) #define PLL_EN BIT(5) #define SYSCLK_EN BIT(4) #define CLKBUF_L_EN BIT(3) #define PLL_TXCLK_EN BIT(1) #define PLL_RXCLK_EN BIT(0) #define L0_RX_SIGDET_EN BIT(7) #define L0_RX_TERM_MODE(x) (((x) & 3) << 4) #define L0_RX_I_EN BIT(1) #define L0_TX_EN BIT(5) #define L0_CLKBUF_EN BIT(4) #define L0_TRAN_BIAS_EN BIT(1) #define L0_RX_EQUALIZE_ENABLE BIT(6) #define L0_RESET_TSYNC_EN BIT(4) #define L0_DRV_LVL(x) ((x) & 0xf) #define PWRDN_B BIT(0) #define CDR_MAX_CNT(x) ((x) & 0xff) #define PLLLOCK_CMP(x) ((x) & 0xff) #define SERDES_START_WAIT_TIMES 100 struct emac_reg_write { unsigned int offset; u32 val; }; static void emac_reg_write_all(void __iomem *base, const struct emac_reg_write *itr, size_t size) { size_t i; for (i = 0; i < size; ++itr, ++i) writel(itr->val, base + itr->offset); } static const struct emac_reg_write physical_coding_sublayer_programming[] = { {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)}, {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B}, {EMAC_SGMII_PHY_CMN_PWR_CTRL, BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN}, {EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN}, {EMAC_SGMII_PHY_RX_PWR_CTRL, L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN}, {EMAC_SGMII_PHY_CMN_PWR_CTRL, BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN}, {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)}, }; static const struct emac_reg_write sysclk_refclk_setting[] = { {EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS}, {EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE}, }; static const struct emac_reg_write pll_setting[] = { {EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)}, {EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)}, {EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)}, {EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)}, {EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)}, {EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD}, {EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)}, {EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2}, {EMAC_QSERDES_COM_DIV_FRAC_START1, DIV_FRAC_START_MUX | DIV_FRAC_START(85)}, {EMAC_QSERDES_COM_DIV_FRAC_START2, DIV_FRAC_START_MUX | DIV_FRAC_START(42)}, {EMAC_QSERDES_COM_DIV_FRAC_START3, DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)}, {EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)}, {EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)}, {EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)}, {EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN}, {EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE}, }; static const struct emac_reg_write cdr_setting[] = { {EMAC_QSERDES_RX_CDR_CONTROL, SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)}, {EMAC_QSERDES_RX_CDR_CONTROL2, SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)}, }; static const struct emac_reg_write tx_rx_setting[] = { {EMAC_QSERDES_TX_BIST_MODE_LANENO, 0}, {EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)}, {EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN}, {EMAC_QSERDES_TX_TX_EMP_POST1_LVL, TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)}, {EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)}, {EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)}, }; int emac_sgmii_init_fsm9900(struct emac_adapter *adpt) { struct emac_sgmii *phy = &adpt->phy; unsigned int i; emac_reg_write_all(phy->base, physical_coding_sublayer_programming, ARRAY_SIZE(physical_coding_sublayer_programming)); emac_reg_write_all(phy->base, sysclk_refclk_setting, ARRAY_SIZE(sysclk_refclk_setting)); emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting)); emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting)); emac_reg_write_all(phy->base, tx_rx_setting, ARRAY_SIZE(tx_rx_setting)); /* Power up the Ser/Des engine */ writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START); for (i = 0; i < SERDES_START_WAIT_TIMES; i++) { if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY) break; usleep_range(100, 200); } if (i == SERDES_START_WAIT_TIMES) { netdev_err(adpt->netdev, "error: ser/des failed to start\n"); return -EIO; } /* Mask out all the SGMII Interrupt */ writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1