| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Mathieu Olivari | 1285 | 87.83% | 2 | 25.00% |
| Joachim Eastwood | 112 | 7.66% | 2 | 25.00% |
| Johan Hovold | 47 | 3.21% | 1 | 12.50% |
| Stephen Boyd | 11 | 0.75% | 1 | 12.50% |
| Arnd Bergmann | 5 | 0.34% | 1 | 12.50% |
| Dan Carpenter | 3 | 0.21% | 1 | 12.50% |
| Total | 1463 | 8 |
/* * Qualcomm Atheros IPQ806x GMAC glue layer * * Copyright (C) 2015 The Linux Foundation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/phy.h> #include <linux/regmap.h> #include <linux/clk.h> #include <linux/reset.h> #include <linux/of_net.h> #include <linux/mfd/syscon.h> #include <linux/stmmac.h> #include <linux/of_mdio.h> #include <linux/module.h> #include "stmmac_platform.h" #define NSS_COMMON_CLK_GATE 0x8 #define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x) #define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2)) #define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2)) #define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x) #define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x) #define NSS_COMMON_CLK_DIV0 0xC #define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8) #define NSS_COMMON_CLK_DIV_MASK 0x7f #define NSS_COMMON_CLK_SRC_CTRL 0x14 #define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (x) /* Mode is coded on 1 bit but is different depending on the MAC ID: * MAC0: QSGMII=0 RGMII=1 * MAC1: QSGMII=0 SGMII=0 RGMII=1 * MAC2 & MAC3: QSGMII=0 SGMII=1 */ #define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1 #define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0) #define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4)) #define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19) #define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16) #define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8 #define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0 #define NSS_COMMON_CLK_DIV_RGMII_1000 1 #define NSS_COMMON_CLK_DIV_RGMII_100 9 #define NSS_COMMON_CLK_DIV_RGMII_10 99 #define NSS_COMMON_CLK_DIV_SGMII_1000 0 #define NSS_COMMON_CLK_DIV_SGMII_100 4 #define NSS_COMMON_CLK_DIV_SGMII_10 49 #define QSGMII_PCS_CAL_LCKDT_CTL 0x120 #define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19) /* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */ #define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \ (0x13c + (4 * (x - 2)))) #define QSGMII_PHY_CDR_EN BIT(0) #define QSGMII_PHY_RX_FRONT_EN BIT(1) #define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2) #define QSGMII_PHY_TX_DRIVER_EN BIT(3) #define QSGMII_PHY_QSGMII_EN BIT(7) #define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12 #define QSGMII_PHY_RX_DC_BIAS_OFFSET 18 #define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20 #define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22 #define QSGMII_PHY_TX_DRV_AMP_OFFSET 28 struct ipq806x_gmac { struct platform_device *pdev; struct regmap *nss_common; struct regmap *qsgmii_csr; uint32_t id; struct clk *core_clk; phy_interface_t phy_mode; }; static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed) { struct device *dev = &gmac->pdev->dev; int div; switch (speed) { case SPEED_1000: div = NSS_COMMON_CLK_DIV_SGMII_1000; break; case SPEED_100: div = NSS_COMMON_CLK_DIV_SGMII_100; break; case SPEED_10: div = NSS_COMMON_CLK_DIV_SGMII_10; break; default: dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed); return -EINVAL; } return div; } static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed) { struct device *dev = &gmac->pdev->dev; int div; switch (speed) { case SPEED_1000: div = NSS_COMMON_CLK_DIV_RGMII_1000; break; case SPEED_100: div = NSS_COMMON_CLK_DIV_RGMII_100; break; case SPEED_10: div = NSS_COMMON_CLK_DIV_RGMII_10; break; default: dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed); return -EINVAL; } return div; } static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed) { uint32_t clk_bits, val; int div; switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: div = get_clk_div_rgmii(gmac, speed); clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); break; case PHY_INTERFACE_MODE_SGMII: div = get_clk_div_sgmii(gmac, speed); clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); break; default: dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n", phy_modes(gmac->phy_mode)); return -EINVAL; } /* Disable the clocks */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); val &= ~clk_bits; regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); /* Set the divider */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val); val &= ~(NSS_COMMON_CLK_DIV_MASK << NSS_COMMON_CLK_DIV_OFFSET(gmac->id)); val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id); regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val); /* Enable the clock back */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); val |= clk_bits; regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); return 0; } static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac) { struct device *dev = &gmac->pdev->dev; gmac->phy_mode = of_get_phy_mode(dev->of_node); if ((int)gmac->phy_mode < 0) { dev_err(dev, "missing phy mode property\n"); return -EINVAL; } if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) { dev_err(dev, "missing qcom id property\n"); return -EINVAL; } /* The GMACs are called 1 to 4 in the documentation, but to simplify the * code and keep it consistent with the Linux convention, we'll number * them from 0 to 3 here. */ if (gmac->id > 3) { dev_err(dev, "invalid gmac id\n"); return -EINVAL; } gmac->core_clk = devm_clk_get(dev, "stmmaceth"); if (IS_ERR(gmac->core_clk)) { dev_err(dev, "missing stmmaceth clk property\n"); return PTR_ERR(gmac->core_clk); } clk_set_rate(gmac->core_clk, 266000000); /* Setup the register map for the nss common registers */ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node, "qcom,nss-common"); if (IS_ERR(gmac->nss_common)) { dev_err(dev, "missing nss-common node\n"); return PTR_ERR(gmac->nss_common); } /* Setup the register map for the qsgmii csr registers */ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node, "qcom,qsgmii-csr"); if (IS_ERR(gmac->qsgmii_csr)) dev_err(dev, "missing qsgmii-csr node\n"); return PTR_ERR_OR_ZERO(gmac->qsgmii_csr); } static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed) { struct ipq806x_gmac *gmac = priv; ipq806x_gmac_set_speed(gmac, speed); } static int ipq806x_gmac_probe(struct platform_device *pdev) { struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct device *dev = &pdev->dev; struct ipq806x_gmac *gmac; int val; int err; val = stmmac_get_platform_resources(pdev, &stmmac_res); if (val) return val; plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); if (IS_ERR(plat_dat)) return PTR_ERR(plat_dat); gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); if (!gmac) { err = -ENOMEM; goto err_remove_config_dt; } gmac->pdev = pdev; err = ipq806x_gmac_of_parse(gmac); if (err) { dev_err(dev, "device tree parsing error\n"); goto err_remove_config_dt; } regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL, QSGMII_PCS_CAL_LCKDT_CTL_RST); /* Inter frame gap is set to 12 */ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET | 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET; /* We also initiate an AXI low power exit request */ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ; switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; break; case PHY_INTERFACE_MODE_SGMII: val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; break; default: dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", phy_modes(gmac->phy_mode)); err = -EINVAL; goto err_remove_config_dt; } regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val); /* Configure the clock src according to the mode */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val); val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id)); switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); break; case PHY_INTERFACE_MODE_SGMII: val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); break; default: dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", phy_modes(gmac->phy_mode)); err = -EINVAL; goto err_remove_config_dt; } regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val); /* Enable PTP clock */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) { regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), QSGMII_PHY_CDR_EN | QSGMII_PHY_RX_FRONT_EN | QSGMII_PHY_RX_SIGNAL_DETECT_EN | QSGMII_PHY_TX_DRIVER_EN | QSGMII_PHY_QSGMII_EN | 0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET | 0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET | 0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET | 0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET | 0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET); } plat_dat->has_gmac = true; plat_dat->bsp_priv = gmac; plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed; err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (err) goto err_remove_config_dt; return 0; err_remove_config_dt: stmmac_remove_config_dt(pdev, plat_dat); return err; } static const struct of_device_id ipq806x_gmac_dwmac_match[] = { { .compatible = "qcom,ipq806x-gmac" }, { } }; MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match); static struct platform_driver ipq806x_gmac_dwmac_driver = { .probe = ipq806x_gmac_probe, .remove = stmmac_pltfr_remove, .driver = { .name = "ipq806x-gmac-dwmac", .pm = &stmmac_pltfr_pm_ops, .of_match_table = ipq806x_gmac_dwmac_match, }, }; module_platform_driver(ipq806x_gmac_dwmac_driver); MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>"); MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer"); MODULE_LICENSE("Dual BSD/GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1