| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Erik Stromdahl | 498 | 99.60% | 2 | 66.67% |
| Kalle Valo | 2 | 0.40% | 1 | 33.33% |
| Total | 500 | 3 |
/* SPDX-License-Identifier: ISC */ /* * Copyright (c) 2004-2011 Atheros Communications Inc. * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com> */ #ifndef _SDIO_H_ #define _SDIO_H_ #define ATH10K_HIF_MBOX_BLOCK_SIZE 256 #define QCA_MANUFACTURER_ID_BASE GENMASK(11, 8) #define QCA_MANUFACTURER_ID_AR6005_BASE 0x5 #define QCA_MANUFACTURER_ID_QCA9377_BASE 0x7 #define QCA_SDIO_ID_AR6005_BASE 0x500 #define QCA_SDIO_ID_QCA9377_BASE 0x700 #define QCA_MANUFACTURER_ID_REV_MASK 0x00FF #define QCA_MANUFACTURER_CODE 0x271 /* Qualcomm/Atheros */ #define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ /* Mailbox address in SDIO address space */ #define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 #define ATH10K_HIF_MBOX_WIDTH 0x800 #define ATH10K_HIF_MBOX_TOT_WIDTH \ (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) #define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 #define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) #define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) #define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) #define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) #define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) #define ATH10K_HIF_MBOX_NUM_MAX 4 #define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 64 #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) /* HTC runs over mailbox 0 */ #define ATH10K_HTC_MAILBOX 0 #define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) /* GMBOX addresses */ #define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 #define ATH10K_HIF_GMBOX_WIDTH 0x4000 /* Modified versions of the sdio.h macros. * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} * macros in bitfield.h, so we define our own macros here. */ #define ATH10K_SDIO_DRIVE_DTSX_MASK \ (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) #define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 /* SDIO CCCR register definitions */ #define CCCR_SDIO_IRQ_MODE_REG 0xF0 #define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 #define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 #define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 /* mode to enable special 4-bit interrupt assertion without clock */ #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) #define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 /* The theoretical maximum number of RX messages that can be fetched * from the mbox interrupt handler in one loop is derived in the following * way: * * Let's assume that each packet in a bundle of the maximum bundle size * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE). * * in this case the driver must allocate * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's. */ #define ATH10K_SDIO_MAX_RX_MSGS \ (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 struct ath10k_sdio_bus_request { struct list_head list; /* sdio address */ u32 address; struct sk_buff *skb; enum ath10k_htc_ep_id eid; int status; /* Specifies if the current request is an HTC message. * If not, the eid is not applicable an the TX completion handler * associated with the endpoint will not be invoked. */ bool htc_msg; /* Completion that (if set) will be invoked for non HTC requests * (htc_msg == false) when the request has been processed. */ struct completion *comp; }; struct ath10k_sdio_rx_data { struct sk_buff *skb; size_t alloc_len; size_t act_len; enum ath10k_htc_ep_id eid; bool part_of_bundle; bool last_in_bundle; bool trailer_only; int status; }; struct ath10k_sdio_irq_proc_regs { u8 host_int_status; u8 cpu_int_status; u8 error_int_status; u8 counter_int_status; u8 mbox_frame; u8 rx_lookahead_valid; u8 host_int_status2; u8 gmbox_rx_avail; __le32 rx_lookahead[2]; __le32 rx_gmbox_lookahead_alias[2]; }; struct ath10k_sdio_irq_enable_regs { u8 int_status_en; u8 cpu_int_status_en; u8 err_int_status_en; u8 cntr_int_status_en; }; struct ath10k_sdio_irq_data { /* protects irq_proc_reg and irq_en_reg below. * We use a mutex here and not a spinlock since we will have the * mutex locked while calling the sdio_memcpy_ functions. * These function require non atomic context, and hence, spinlocks * can be held while calling these functions. */ struct mutex mtx; struct ath10k_sdio_irq_proc_regs *irq_proc_reg; struct ath10k_sdio_irq_enable_regs *irq_en_reg; }; struct ath10k_mbox_ext_info { u32 htc_ext_addr; u32 htc_ext_sz; }; struct ath10k_mbox_info { u32 htc_addr; struct ath10k_mbox_ext_info ext_info[2]; u32 block_size; u32 block_mask; u32 gmbox_addr; u32 gmbox_sz; }; struct ath10k_sdio { struct sdio_func *func; struct ath10k_mbox_info mbox_info; bool swap_mbox; u32 mbox_addr[ATH10K_HTC_EP_COUNT]; u32 mbox_size[ATH10K_HTC_EP_COUNT]; /* available bus requests */ struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; /* free list of bus requests */ struct list_head bus_req_freeq; /* protects access to bus_req_freeq */ spinlock_t lock; struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; size_t n_rx_pkts; struct ath10k *ar; struct ath10k_sdio_irq_data irq_data; /* temporary buffer for BMI requests */ u8 *bmi_buf; bool is_disabled; struct workqueue_struct *workqueue; struct work_struct wr_async_work; struct list_head wr_asyncq; /* protects access to wr_asyncq */ spinlock_t wr_async_lock; }; static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) { return (struct ath10k_sdio *)ar->drv_priv; } #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1