Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Emmanuel Grumbach | 1669 | 43.04% | 68 | 38.64% |
Johannes Berg | 697 | 17.97% | 37 | 21.02% |
Sara Sharon | 418 | 10.78% | 15 | 8.52% |
Shahar S Matityahu | 213 | 5.49% | 12 | 6.82% |
Eliad Peller | 145 | 3.74% | 6 | 3.41% |
Arik Nemtsov | 119 | 3.07% | 7 | 3.98% |
Sharon Dvir | 94 | 2.42% | 1 | 0.57% |
Golan Ben-Ami | 80 | 2.06% | 4 | 2.27% |
Alex Malamud | 76 | 1.96% | 1 | 0.57% |
Lilach Edelstein | 74 | 1.91% | 2 | 1.14% |
Liad Kaufman | 59 | 1.52% | 3 | 1.70% |
Meenakshi Venkataraman | 52 | 1.34% | 3 | 1.70% |
Don Fry | 41 | 1.06% | 1 | 0.57% |
Aviya Erenfeld | 38 | 0.98% | 1 | 0.57% |
Stanislaw Gruszka | 22 | 0.57% | 1 | 0.57% |
Matti Gottlieb | 16 | 0.41% | 1 | 0.57% |
Luciano Coelho | 15 | 0.39% | 5 | 2.84% |
Lior Cohen | 12 | 0.31% | 1 | 0.57% |
Haim Dreyfuss | 11 | 0.28% | 2 | 1.14% |
Gregory Greenman | 9 | 0.23% | 1 | 0.57% |
Eran Harary | 6 | 0.15% | 1 | 0.57% |
David Spinadel | 5 | 0.13% | 1 | 0.57% |
Eric Dumazet | 4 | 0.10% | 1 | 0.57% |
Oren Givon | 3 | 0.08% | 1 | 0.57% |
Total | 3878 | 176 |
/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * Copyright(c) 2018 - 2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless <linuxwifi@intel.com> * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * Copyright(c) 2018 - 2019 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __iwl_trans_h__ #define __iwl_trans_h__ #include <linux/ieee80211.h> #include <linux/mm.h> /* for page_address */ #include <linux/lockdep.h> #include <linux/kernel.h> #include "iwl-debug.h" #include "iwl-config.h" #include "fw/img.h" #include "iwl-op-mode.h" #include "fw/api/cmdhdr.h" #include "fw/api/txq.h" #include "fw/api/dbg-tlv.h" #include "iwl-dbg-tlv.h" /** * DOC: Transport layer - what is it ? * * The transport layer is the layer that deals with the HW directly. It provides * an abstraction of the underlying HW to the upper layer. The transport layer * doesn't provide any policy, algorithm or anything of this kind, but only * mechanisms to make the HW do something. It is not completely stateless but * close to it. * We will have an implementation for each different supported bus. */ /** * DOC: Life cycle of the transport layer * * The transport layer has a very precise life cycle. * * 1) A helper function is called during the module initialization and * registers the bus driver's ops with the transport's alloc function. * 2) Bus's probe calls to the transport layer's allocation functions. * Of course this function is bus specific. * 3) This allocation functions will spawn the upper layer which will * register mac80211. * * 4) At some point (i.e. mac80211's start call), the op_mode will call * the following sequence: * start_hw * start_fw * * 5) Then when finished (or reset): * stop_device * * 6) Eventually, the free function will be called. */ #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ #define FH_RSCSR_FRAME_INVALID 0x55550000 #define FH_RSCSR_FRAME_ALIGN 0x40 #define FH_RSCSR_RPA_EN BIT(25) #define FH_RSCSR_RADA_EN BIT(26) #define FH_RSCSR_RXQ_POS 16 #define FH_RSCSR_RXQ_MASK 0x3F0000 struct iwl_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-27: Reserved * 26: RADA enabled * 25: Offload enabled * 24: RPF enabled * 23: RSS enabled * 22: Checksum enabled * 21-16: RX queue * 15-14: Reserved * 13-00: RX frame size */ __le32 len_n_flags; struct iwl_cmd_header hdr; u8 data[]; } __packed; static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt) { return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; } static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) { return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr); } /** * enum CMD_MODE - how to send the host commands ? * * @CMD_ASYNC: Return right away and don't wait for the response * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of * the response. The caller needs to call iwl_free_resp when done. * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be * called after this command completes. Valid only with CMD_ASYNC. */ enum CMD_MODE { CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), CMD_SEND_IN_RFKILL = BIT(2), CMD_WANT_ASYNC_CALLBACK = BIT(3), }; #define DEF_CMD_PAYLOAD_SIZE 320 /** * struct iwl_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for commands that * aren't fully copied and use other TFD space. */ struct iwl_device_cmd { union { struct { struct iwl_cmd_header hdr; /* uCode API */ u8 payload[DEF_CMD_PAYLOAD_SIZE]; }; struct { struct iwl_cmd_header_wide hdr_wide; u8 payload_wide[DEF_CMD_PAYLOAD_SIZE - sizeof(struct iwl_cmd_header_wide) + sizeof(struct iwl_cmd_header)]; }; }; } __packed; #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) /* * number of transfer buffers (fragments) per transmit frame descriptor; * this is just the driver's idea, the hardware supports 20 */ #define IWL_MAX_CMD_TBS_PER_TFD 2 /** * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command * * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's * ring. The transport layer doesn't map the command's buffer to DMA, but * rather copies it to a previously allocated DMA buffer. This flag tells * the transport layer not to copy the command, but to map the existing * buffer (that is passed in) instead. This saves the memcpy and allows * commands that are bigger than the fixed buffer to be submitted. * Note that a TFD entry after a NOCOPY one cannot be a normal copied one. * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this * chunk internally and free it again after the command completes. This * can (currently) be used only once per command. * Note that a TFD entry after a DUP one cannot be a normal copied one. */ enum iwl_hcmd_dataflag { IWL_HCMD_DFL_NOCOPY = BIT(0), IWL_HCMD_DFL_DUP = BIT(1), }; enum iwl_error_event_table_status { IWL_ERROR_EVENT_TABLE_LMAC1 = BIT(0), IWL_ERROR_EVENT_TABLE_LMAC2 = BIT(1), IWL_ERROR_EVENT_TABLE_UMAC = BIT(2), }; /** * struct iwl_host_cmd - Host command to the uCode * * @data: array of chunks that composes the data of the host command * @resp_pkt: response packet, if %CMD_WANT_SKB was set * @_rx_page_order: (internally used to free response packet) * @_rx_page_addr: (internally used to free response packet) * @flags: can be CMD_* * @len: array of the lengths of the chunks in data * @dataflags: IWL_HCMD_DFL_* * @id: command id of the host command, for wide commands encoding the * version and group as well */ struct iwl_host_cmd { const void *data[IWL_MAX_CMD_TBS_PER_TFD]; struct iwl_rx_packet *resp_pkt; unsigned long _rx_page_addr; u32 _rx_page_order; u32 flags; u32 id; u16 len[IWL_MAX_CMD_TBS_PER_TFD]; u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD]; }; static inline void iwl_free_resp(struct iwl_host_cmd *cmd) { free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); } struct iwl_rx_cmd_buffer { struct page *_page; int _offset; bool _page_stolen; u32 _rx_page_order; unsigned int truesize; }; static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) { return (void *)((unsigned long)page_address(r->_page) + r->_offset); } static inline int rxb_offset(struct iwl_rx_cmd_buffer *r) { return r->_offset; } static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) { r->_page_stolen = true; get_page(r->_page); return r->_page; } static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r) { __free_pages(r->_page, r->_rx_page_order); } #define MAX_NO_RECLAIM_CMDS 6 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) /* * Maximum number of HW queues the transport layer * currently supports */ #define IWL_MAX_HW_QUEUES 32 #define IWL_MAX_TVQM_QUEUES 512 #define IWL_MAX_TID_COUNT 8 #define IWL_MGMT_TID 15 #define IWL_FRAME_LIMIT 64 #define IWL_MAX_RX_HW_QUEUES 16 /** * enum iwl_wowlan_status - WoWLAN image/device status * @IWL_D3_STATUS_ALIVE: firmware is still running after resume * @IWL_D3_STATUS_RESET: device was reset while suspended */ enum iwl_d3_status { IWL_D3_STATUS_ALIVE, IWL_D3_STATUS_RESET, }; /** * enum iwl_trans_status: transport status flags * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed * @STATUS_DEVICE_ENABLED: APM is enabled * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up) * @STATUS_INT_ENABLED: interrupts are enabled * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode * @STATUS_FW_ERROR: the fw is in error state * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands * are sent * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation */ enum iwl_trans_status { STATUS_SYNC_HCMD_ACTIVE, STATUS_DEVICE_ENABLED, STATUS_TPOWER_PMI, STATUS_INT_ENABLED, STATUS_RFKILL_HW, STATUS_RFKILL_OPMODE, STATUS_FW_ERROR, STATUS_TRANS_GOING_IDLE, STATUS_TRANS_IDLE, STATUS_TRANS_DEAD, }; static inline int iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size) { switch (rb_size) { case IWL_AMSDU_2K: return get_order(2 * 1024); case IWL_AMSDU_4K: return get_order(4 * 1024); case IWL_AMSDU_8K: return get_order(8 * 1024); case IWL_AMSDU_12K: return get_order(12 * 1024); default: WARN_ON(1); return -1; } } struct iwl_hcmd_names { u8 cmd_id; const char *const cmd_name; }; #define HCMD_NAME(x) \ { .cmd_id = x, .cmd_name = #x } struct iwl_hcmd_arr { const struct iwl_hcmd_names *arr; int size; }; #define HCMD_ARR(x) \ { .arr = x, .size = ARRAY_SIZE(x) } /** * struct iwl_trans_config - transport configuration * * @op_mode: pointer to the upper layer. * @cmd_queue: the index of the command queue. * Must be set before start_fw. * @cmd_fifo: the fifo for host commands * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue. * @no_reclaim_cmds: Some devices erroneously don't set the * SEQ_RX_FRAME bit on some notifications, this is the * list of such notifications to filter. Max length is * %MAX_NO_RECLAIM_CMDS. * @n_no_reclaim_cmds: # of commands in list * @rx_buf_size: RX buffer size needed for A-MSDUs * if unset 4k will be the RX buffer size * @bc_table_dword: set to true if the BC table expects the byte count to be * in DWORD (as opposed to bytes) * @scd_set_active: should the transport configure the SCD for HCMD queue * @sw_csum_tx: transport should compute the TCP checksum * @command_groups: array of command groups, each member is an array of the * commands in the group; for debugging only * @command_groups_size: number of command groups, to avoid illegal access * @cb_data_offs: offset inside skb->cb to store transport data at, must have * space for at least two pointers */ struct iwl_trans_config { struct iwl_op_mode *op_mode; u8 cmd_queue; u8 cmd_fifo; unsigned int cmd_q_wdg_timeout; const u8 *no_reclaim_cmds; unsigned int n_no_reclaim_cmds; enum iwl_amsdu_size rx_buf_size; bool bc_table_dword; bool scd_set_active; bool sw_csum_tx; const struct iwl_hcmd_arr *command_groups; int command_groups_size; u8 cb_data_offs; }; struct iwl_trans_dump_data { u32 len; u8 data[]; }; struct iwl_trans; struct iwl_trans_txq_scd_cfg { u8 fifo; u8 sta_id; u8 tid; bool aggregate; int frame_limit; }; /** * struct iwl_trans_rxq_dma_data - RX queue DMA data * @fr_bd_cb: DMA address of free BD cyclic buffer * @fr_bd_wid: Initial write index of the free BD cyclic buffer * @urbd_stts_wrptr: DMA address of urbd_stts_wrptr * @ur_bd_cb: DMA address of used BD cyclic buffer */ struct iwl_trans_rxq_dma_data { u64 fr_bd_cb; u32 fr_bd_wid; u64 urbd_stts_wrptr; u64 ur_bd_cb; }; /** * struct iwl_trans_ops - transport specific operations * * All the handlers MUST be implemented * * @start_hw: starts the HW. From that point on, the HW can send interrupts. * May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport * layer. Also kick a fw image. * May sleep * @fw_alive: called when the fw sends alive notification. If the fw provides * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops * the HW. From that point on, the HW will be stopped but will still issue * an interrupt if the HW RF kill switch is triggered. * This callback must do the right thing and not crash even if %start_hw() * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. * @d3_resume: resume the device after WoWLAN, enabling the opmode to * talk to the WoWLAN image to get its status. This is optional, if not * implemented WoWLAN will not be supported. This callback may sleep. * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted. * If RFkill is asserted in the middle of a SYNC host command, it must * return -ERFKILL straight away. * May sleep only if CMD_ASYNC is not set * @tx: send an skb. The transport relies on the op_mode to zero the * the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all * the CSUM will be taken care of (TCP CSUM and IP header in case of * IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP * header if it is IPv4. * Must be atomic * @reclaim: free packet until ssn. Returns a list of freed packets. * Must be atomic * @txq_enable: setup a queue. To setup an AC queue, use the * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before * this one. The op_mode must not configure the HCMD queue. The scheduler * configuration may be %NULL, in which case the hardware will not be * configured. If true is returned, the operation mode needs to increment * the sequence number of the packets routed to this queue because of a * hardware scheduler bug. May sleep. * @txq_disable: de-configure a Tx queue to send AMPDUs * Must be atomic * @txq_set_shared_mode: change Tx queue shared/unshared marking * @wait_tx_queues_empty: wait until tx queues are empty. May sleep. * @wait_txq_empty: wait until specific tx queue is empty. May sleep. * @freeze_txq_timer: prevents the timer of the queue from firing until the * queue is set to awake. Must be atomic. * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note * that the transport needs to refcount the calls since this function * will be called several times with block = true, and then the queues * need to be unblocked only after the same number of calls with * block = false. * @write8: write a u8 to a register at offset ofs from the BAR * @write32: write a u32 to a register at offset ofs from the BAR * @read32: read a u32 register at offset ofs from the BAR * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register * @read_mem: read device's SRAM in DWORD * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory * will be zeroed. * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. * @set_pmi: set the power pmi state * @grab_nic_access: wake the NIC to be able to access non-HBUS regs. * Sleeping is not allowed between grab_nic_access and * release_nic_access. * @release_nic_access: let the NIC go to sleep. The "flags" parameter * must be the same one that was sent before to the grab_nic_access. * @set_bits_mask - set SRAM register according to value and mask. * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last * TX'ed commands and similar. The buffer will be vfree'd by the caller. * Note that the transport must fill in the proper file headers. * @debugfs_cleanup: used in the driver unload flow to make a proper cleanup * of the trans debugfs */ struct iwl_trans_ops { int (*start_hw)(struct iwl_trans *iwl_trans); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans); int (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, bool test, bool reset); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); int (*tx)(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, int queue); void (*reclaim)(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs); void (*set_q_ptrs)(struct iwl_trans *trans, int queue, int ptr); bool (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout); void (*txq_disable)(struct iwl_trans *trans, int queue, bool configure_scd); /* 22000 functions */ int (*txq_alloc)(struct iwl_trans *trans, __le16 flags, u8 sta_id, u8 tid, int cmd_id, int size, unsigned int queue_wdg_timeout); void (*txq_free)(struct iwl_trans *trans, int queue); int (*rxq_dma_data)(struct iwl_trans *trans, int queue, struct iwl_trans_rxq_dma_data *data); void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id, bool shared); int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm); int (*wait_txq_empty)(struct iwl_trans *trans, int queue); void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs, bool freeze); void (*block_txq_ptrs)(struct iwl_trans *trans, bool block); void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); u32 (*read32)(struct iwl_trans *trans, u32 ofs); u32 (*read_prph)(struct iwl_trans *trans, u32 ofs); void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val); int (*read_mem)(struct iwl_trans *trans, u32 addr, void *buf, int dwords); int (*write_mem)(struct iwl_trans *trans, u32 addr, const void *buf, int dwords); void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); void (*sw_reset)(struct iwl_trans *trans); bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags); void (*release_nic_access)(struct iwl_trans *trans, unsigned long *flags); void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); int (*suspend)(struct iwl_trans *trans); void (*resume)(struct iwl_trans *trans); struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans, u32 dump_mask); void (*debugfs_cleanup)(struct iwl_trans *trans); void (*sync_nmi)(struct iwl_trans *trans); }; /** * enum iwl_trans_state - state of the transport layer * * @IWL_TRANS_NO_FW: no fw has sent an alive response * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response */ enum iwl_trans_state { IWL_TRANS_NO_FW = 0, IWL_TRANS_FW_ALIVE = 1, }; /** * DOC: Platform power management * * In system-wide power management the entire platform goes into a low * power state (e.g. idle or suspend to RAM) at the same time and the * device is configured as a wakeup source for the entire platform. * This is usually triggered by userspace activity (e.g. the user * presses the suspend button or a power management daemon decides to * put the platform in low power mode). The device's behavior in this * mode is dictated by the wake-on-WLAN configuration. * * The terms used for the device's behavior are as follows: * * - D0: the device is fully powered and the host is awake; * - D3: the device is in low power mode and only reacts to * specific events (e.g. magic-packet received or scan * results found); * * These terms reflect the power modes in the firmware and are not to * be confused with the physical device power state. */ /** * enum iwl_plat_pm_mode - platform power management mode * * This enumeration describes the device's platform power management * behavior when in system-wide suspend (i.e WoWLAN). * * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this * device. In system-wide suspend mode, it means that the all * connections will be closed automatically by mac80211 before * the platform is suspended. * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN). */ enum iwl_plat_pm_mode { IWL_PLAT_PM_MODE_DISABLED, IWL_PLAT_PM_MODE_D3, }; /** * enum iwl_ini_cfg_state * @IWL_INI_CFG_STATE_NOT_LOADED: no debug cfg was given * @IWL_INI_CFG_STATE_LOADED: debug cfg was found and loaded * @IWL_INI_CFG_STATE_CORRUPTED: debug cfg was found and some of the TLVs * are corrupted. The rest of the debug TLVs will still be used */ enum iwl_ini_cfg_state { IWL_INI_CFG_STATE_NOT_LOADED, IWL_INI_CFG_STATE_LOADED, IWL_INI_CFG_STATE_CORRUPTED, }; /* Max time to wait for nmi interrupt */ #define IWL_TRANS_NMI_TIMEOUT (HZ / 4) /** * struct iwl_dram_data * @physical: page phy pointer * @block: pointer to the allocated block/page * @size: size of the block/page */ struct iwl_dram_data { dma_addr_t physical; void *block; int size; }; /** * struct iwl_self_init_dram - dram data used by self init process * @fw: lmac and umac dram data * @fw_cnt: total number of items in array * @paging: paging dram data * @paging_cnt: total number of items in array */ struct iwl_self_init_dram { struct iwl_dram_data *fw; int fw_cnt; struct iwl_dram_data *paging; int paging_cnt; }; /** * struct iwl_trans_debug - transport debug related data * * @n_dest_reg: num of reg_ops in %dbg_dest_tlv * @rec_on: true iff there is a fw debug recording currently active * @dest_tlv: points to the destination TLV for debug * @conf_tlv: array of pointers to configuration TLVs for debug * @trigger_tlv: array of pointers to triggers TLVs for debug * @lmac_error_event_table: addrs of lmacs error tables * @umac_error_event_table: addr of umac error table * @error_event_table_tlv_status: bitmap that indicates what error table * pointers was recevied via TLV. uses enum &iwl_error_event_table_status * @internal_ini_cfg: internal debug cfg state. Uses &enum iwl_ini_cfg_state * @external_ini_cfg: external debug cfg state. Uses &enum iwl_ini_cfg_state * @num_blocks: number of blocks in fw_mon * @fw_mon: address of the buffers for firmware monitor * @hw_error: equals true if hw error interrupt was received from the FW * @ini_dest: debug monitor destination uses &enum iwl_fw_ini_buffer_location */ struct iwl_trans_debug { u8 n_dest_reg; bool rec_on; const struct iwl_fw_dbg_dest_tlv_v1 *dest_tlv; const struct iwl_fw_dbg_conf_tlv *conf_tlv[FW_DBG_CONF_MAX]; struct iwl_fw_dbg_trigger_tlv * const *trigger_tlv; u32 lmac_error_event_table[2]; u32 umac_error_event_table; unsigned int error_event_table_tlv_status; enum iwl_ini_cfg_state internal_ini_cfg; enum iwl_ini_cfg_state external_ini_cfg; int num_blocks; struct iwl_dram_data fw_mon[IWL_FW_INI_ALLOCATION_NUM]; bool hw_error; enum iwl_fw_ini_buffer_location ini_dest; }; /** * struct iwl_trans - transport common data * * @ops - pointer to iwl_trans_ops * @op_mode - pointer to the op_mode * @trans_cfg: the trans-specific configuration part * @cfg - pointer to the configuration * @drv - pointer to iwl_drv * @status: a bit-mask of transport status flags * @dev - pointer to struct device * that represents the device * @max_skb_frags: maximum number of fragments an SKB can have when transmitted. * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported. * @hw_rf_id a u32 with the device RF ID * @hw_id: a u32 with the ID of the device / sub-device. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @pm_support: set to true in start_hw if link pm is supported * @ltr_enabled: set to true if the LTR is enabled * @wide_cmd_header: true when ucode supports wide command header format * @num_rx_queues: number of RX queues allocated by the transport; * the transport must set this before calling iwl_drv_start() * @iml_len: the length of the image loader * @iml: a pointer to the image loader itself * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only. * The user should use iwl_trans_{alloc,free}_tx_cmd. * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before * starting the firmware, used for tracing * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the * start of the 802.11 header in the @rx_mpdu_cmd * @dflt_pwr_limit: default power limit fetched from the platform (ACPI) * @system_pm_mode: the system-wide power management mode in use. * This mode is set dynamically, depending on the WoWLAN values * configured from the userspace at runtime. */ struct iwl_trans { const struct iwl_trans_ops *ops; struct iwl_op_mode *op_mode; const struct iwl_cfg_trans_params *trans_cfg; const struct iwl_cfg *cfg; struct iwl_drv *drv; enum iwl_trans_state state; unsigned long status; struct device *dev; u32 max_skb_frags; u32 hw_rev; u32 hw_rf_id; u32 hw_id; char hw_id_str[52]; u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size; bool pm_support; bool ltr_enabled; const struct iwl_hcmd_arr *command_groups; int command_groups_size; bool wide_cmd_header; u8 num_rx_queues; size_t iml_len; u8 *iml; /* The following fields are internal only */ struct kmem_cache *dev_cmd_pool; char dev_cmd_pool_name[50]; struct dentry *dbgfs_dir; #ifdef CONFIG_LOCKDEP struct lockdep_map sync_cmd_lockdep_map; #endif struct iwl_trans_debug dbg; struct iwl_self_init_dram init_dram; enum iwl_plat_pm_mode system_pm_mode; /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ char trans_specific[0] __aligned(sizeof(void *)); }; const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id); int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans); static inline void iwl_trans_configure(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg) { trans->op_mode = trans_cfg->op_mode; trans->ops->configure(trans, trans_cfg); WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)); } static inline int iwl_trans_start_hw(struct iwl_trans *trans) { might_sleep(); return trans->ops->start_hw(trans); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) { might_sleep(); if (trans->ops->op_mode_leave) trans->ops->op_mode_leave(trans); trans->op_mode = NULL; trans->state = IWL_TRANS_NO_FW; } static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr) { might_sleep(); trans->state = IWL_TRANS_FW_ALIVE; trans->ops->fw_alive(trans, scd_addr); } static inline int iwl_trans_start_fw(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill) { might_sleep(); WARN_ON_ONCE(!trans->rx_mpdu_cmd); clear_bit(STATUS_FW_ERROR, &trans->status); return trans->ops->start_fw(trans, fw, run_in_rfkill); } static inline void iwl_trans_stop_device(struct iwl_trans *trans) { might_sleep(); trans->ops->stop_device(trans); trans->state = IWL_TRANS_NO_FW; } static inline int iwl_trans_d3_suspend(struct iwl_trans *trans, bool test, bool reset) { might_sleep(); if (!trans->ops->d3_suspend) return 0; return trans->ops->d3_suspend(trans, test, reset); } static inline int iwl_trans_d3_resume(struct iwl_trans *trans, enum iwl_d3_status *status, bool test, bool reset) { might_sleep(); if (!trans->ops->d3_resume) return 0; return trans->ops->d3_resume(trans, status, test, reset); } static inline int iwl_trans_suspend(struct iwl_trans *trans) { if (!trans->ops->suspend) return 0; return trans->ops->suspend(trans); } static inline void iwl_trans_resume(struct iwl_trans *trans) { if (trans->ops->resume) trans->ops->resume(trans); } static inline struct iwl_trans_dump_data * iwl_trans_dump_data(struct iwl_trans *trans, u32 dump_mask) { if (!trans->ops->dump_data) return NULL; return trans->ops->dump_data(trans, dump_mask); } static inline struct iwl_device_cmd * iwl_trans_alloc_tx_cmd(struct iwl_trans *trans) { return kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC); } int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd); static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans, struct iwl_device_cmd *dev_cmd) { kmem_cache_free(trans->dev_cmd_pool, dev_cmd); } static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, int queue) { if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) return -EIO; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->tx(trans, skb, dev_cmd, queue); } static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } trans->ops->reclaim(trans, queue, ssn, skbs); } static inline void iwl_trans_set_q_ptrs(struct iwl_trans *trans, int queue, int ptr) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } trans->ops->set_q_ptrs(trans, queue, ptr); } static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue, bool configure_scd) { trans->ops->txq_disable(trans, queue, configure_scd); } static inline bool iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout) { might_sleep(); if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return false; } return trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout); } static inline int iwl_trans_get_rxq_dma_data(struct iwl_trans *trans, int queue, struct iwl_trans_rxq_dma_data *data) { if (WARN_ON_ONCE(!trans->ops->rxq_dma_data)) return -ENOTSUPP; return trans->ops->rxq_dma_data(trans, queue, data); } static inline void iwl_trans_txq_free(struct iwl_trans *trans, int queue) { if (WARN_ON_ONCE(!trans->ops->txq_free)) return; trans->ops->txq_free(trans, queue); } static inline int iwl_trans_txq_alloc(struct iwl_trans *trans, __le16 flags, u8 sta_id, u8 tid, int cmd_id, int size, unsigned int wdg_timeout) { might_sleep(); if (WARN_ON_ONCE(!trans->ops->txq_alloc)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->txq_alloc(trans, flags, sta_id, tid, cmd_id, size, wdg_timeout); } static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans, int queue, bool shared_mode) { if (trans->ops->txq_set_shared_mode) trans->ops->txq_set_shared_mode(trans, queue, shared_mode); } static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue, int fifo, int sta_id, int tid, int frame_limit, u16 ssn, unsigned int queue_wdg_timeout) { struct iwl_trans_txq_scd_cfg cfg = { .fifo = fifo, .sta_id = sta_id, .tid = tid, .frame_limit = frame_limit, .aggregate = sta_id >= 0, }; iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout); } static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo, unsigned int queue_wdg_timeout) { struct iwl_trans_txq_scd_cfg cfg = { .fifo = fifo, .sta_id = -1, .tid = IWL_MAX_TID_COUNT, .frame_limit = IWL_FRAME_LIMIT, .aggregate = false, }; iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout); } static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans, unsigned long txqs, bool freeze) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } if (trans->ops->freeze_txq_timer) trans->ops->freeze_txq_timer(trans, txqs, freeze); } static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans, bool block) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } if (trans->ops->block_txq_ptrs) trans->ops->block_txq_ptrs(trans, block); } static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans, u32 txqs) { if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->wait_tx_queues_empty(trans, txqs); } static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue) { if (WARN_ON_ONCE(!trans->ops->wait_txq_empty)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->wait_txq_empty(trans, queue); } static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) { trans->ops->write8(trans, ofs, val); } static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) { trans->ops->write32(trans, ofs, val); } static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) { return trans->ops->read32(trans, ofs); } static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs) { return trans->ops->read_prph(trans, ofs); } static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) { return trans->ops->write_prph(trans, ofs, val); } static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr, void *buf, int dwords) { return trans->ops->read_mem(trans, addr, buf, dwords); } #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \ do { \ if (__builtin_constant_p(bufsize)) \ BUILD_BUG_ON((bufsize) % sizeof(u32)); \ iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\ } while (0) static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr) { u32 value; if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1))) return 0xa5a5a5a5; return value; } static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr, const void *buf, int dwords) { return trans->ops->write_mem(trans, addr, buf, dwords); } static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr, u32 val) { return iwl_trans_write_mem(trans, addr, &val, 1); } static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) { if (trans->ops->set_pmi) trans->ops->set_pmi(trans, state); } static inline void iwl_trans_sw_reset(struct iwl_trans *trans) { if (trans->ops->sw_reset) trans->ops->sw_reset(trans); } static inline void iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) { trans->ops->set_bits_mask(trans, reg, mask, value); } #define iwl_trans_grab_nic_access(trans, flags) \ __cond_lock(nic_access, \ likely((trans)->ops->grab_nic_access(trans, flags))) static inline void __releases(nic_access) iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) { trans->ops->release_nic_access(trans, flags); __release(nic_access); } static inline void iwl_trans_fw_error(struct iwl_trans *trans) { if (WARN_ON_ONCE(!trans->op_mode)) return; /* prevent double restarts due to the same erroneous FW */ if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) iwl_op_mode_nic_error(trans->op_mode); } static inline void iwl_trans_sync_nmi(struct iwl_trans *trans) { if (trans->ops->sync_nmi) trans->ops->sync_nmi(trans); } static inline bool iwl_trans_dbg_ini_valid(struct iwl_trans *trans) { return trans->dbg.internal_ini_cfg != IWL_INI_CFG_STATE_NOT_LOADED || trans->dbg.external_ini_cfg != IWL_INI_CFG_STATE_NOT_LOADED; } /***************************************************** * transport helper functions *****************************************************/ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size, struct device *dev, const struct iwl_trans_ops *ops); void iwl_trans_free(struct iwl_trans *trans); /***************************************************** * driver (transport) register/unregister functions ******************************************************/ int __must_check iwl_pci_register_driver(void); void iwl_pci_unregister_driver(void); #endif /* __iwl_trans_h__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1