| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| David Gibson | 615 | 79.56% | 12 | 36.36% |
| Pavel Roskin | 56 | 7.24% | 7 | 21.21% |
| David Kilroy | 51 | 6.60% | 5 | 15.15% |
| Jes Sorensen | 19 | 2.46% | 1 | 3.03% |
| Evan N. McNabb | 10 | 1.29% | 1 | 3.03% |
| Rusty Russell | 8 | 1.03% | 1 | 3.03% |
| Benoit Taine | 6 | 0.78% | 1 | 3.03% |
| Nicholas Mc Guire | 3 | 0.39% | 1 | 3.03% |
| Andrey Borzenkov | 2 | 0.26% | 1 | 3.03% |
| Thomas Gleixner | 1 | 0.13% | 1 | 3.03% |
| Arnaldo Carvalho de Melo | 1 | 0.13% | 1 | 3.03% |
| Jeff Garzik | 1 | 0.13% | 1 | 3.03% |
| Total | 773 | 33 |
/* orinoco_pci.c * * Driver for Prism 2.5/3 devices that have a direct PCI interface * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). * The card contains only one PCI region, which contains all the usual * hermes registers, as well as the COR register. * * Current maintainers are: * Pavel Roskin <proski AT gnu.org> * and David Gibson <hermes AT gibson.dropbear.id.au> * * Some of this code is borrowed from orinoco_plx.c * Copyright (C) 2001 Daniel Barlow <dan AT telent.net> * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing * has been copied from it. linux-wlan-ng-0.1.10 is originally : * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. * This file originally written by: * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com> * And is now maintained by: * (C) Copyright David Gibson, IBM Corp. 2002-2003. * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License * at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See * the License for the specific language governing rights and * limitations under the License. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License version 2 (the "GPL"), in * which case the provisions of the GPL are applicable instead of the * above. If you wish to allow the use of your version of this file * only under the terms of the GPL and not to allow others to use your * version of this file under the MPL, indicate your decision by * deleting the provisions above and replace them with the notice and * other provisions required by the GPL. If you do not delete the * provisions above, a recipient may use your version of this file * under either the MPL or the GPL. */ #define DRIVER_NAME "orinoco_pci" #define PFX DRIVER_NAME ": " #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> #include "orinoco.h" #include "orinoco_pci.h" /* Offset of the COR register of the PCI card */ #define HERMES_PCI_COR (0x26) /* Bitmask to reset the card */ #define HERMES_PCI_COR_MASK (0x0080) /* Magic timeouts for doing the reset. * Those times are straight from wlan-ng, and it is claimed that they * are necessary. Alan will kill me. Take your time and grab a coffee. */ #define HERMES_PCI_COR_ONT (250) /* ms */ #define HERMES_PCI_COR_OFFT (500) /* ms */ #define HERMES_PCI_COR_BUSYT (500) /* ms */ /* * Do a soft reset of the card using the Configuration Option Register * We need this to get going... * This is the part of the code that is strongly inspired from wlan-ng * * Note : This code is done with irq enabled. This mean that many * interrupts will occur while we are there. This is why we use the * jiffies to regulate time instead of a straight mdelay(). Usually we * need only around 245 iteration of the loop to do 250 ms delay. * * Note bis : Don't try to access HERMES_CMD during the reset phase. * It just won't work ! */ static int orinoco_pci_cor_reset(struct orinoco_private *priv) { struct hermes *hw = &priv->hw; unsigned long timeout; u16 reg; /* Assert the reset until the card notices */ hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); mdelay(HERMES_PCI_COR_ONT); /* Give time for the card to recover from this hard effort */ hermes_write_regn(hw, PCI_COR, 0x0000); mdelay(HERMES_PCI_COR_OFFT); /* The card is ready when it's no longer busy */ timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT); reg = hermes_read_regn(hw, CMD); while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { mdelay(1); reg = hermes_read_regn(hw, CMD); } /* Still busy? */ if (reg & HERMES_CMD_BUSY) { printk(KERN_ERR PFX "Busy timeout\n"); return -ETIMEDOUT; } return 0; } static int orinoco_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int err; struct orinoco_private *priv; struct orinoco_pci_card *card; void __iomem *hermes_io; err = pci_enable_device(pdev); if (err) { printk(KERN_ERR PFX "Cannot enable PCI device\n"); return err; } err = pci_request_regions(pdev, DRIVER_NAME); if (err) { printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); goto fail_resources; } hermes_io = pci_iomap(pdev, 0, 0); if (!hermes_io) { printk(KERN_ERR PFX "Cannot remap chipset registers\n"); err = -EIO; goto fail_map_hermes; } /* Allocate network device */ priv = alloc_orinocodev(sizeof(*card), &pdev->dev, orinoco_pci_cor_reset, NULL); if (!priv) { printk(KERN_ERR PFX "Cannot allocate network device\n"); err = -ENOMEM; goto fail_alloc; } card = priv->card; hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, DRIVER_NAME, priv); if (err) { printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); err = -EBUSY; goto fail_irq; } err = orinoco_pci_cor_reset(priv); if (err) { printk(KERN_ERR PFX "Initial reset failed\n"); goto fail; } err = orinoco_init(priv); if (err) { printk(KERN_ERR PFX "orinoco_init() failed\n"); goto fail; } err = orinoco_if_add(priv, 0, 0, NULL); if (err) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail_wiphy; } pci_set_drvdata(pdev, priv); return 0; fail_wiphy: wiphy_unregister(priv_to_wiphy(priv)); fail: free_irq(pdev->irq, priv); fail_irq: free_orinocodev(priv); fail_alloc: pci_iounmap(pdev, hermes_io); fail_map_hermes: pci_release_regions(pdev); fail_resources: pci_disable_device(pdev); return err; } static void orinoco_pci_remove_one(struct pci_dev *pdev) { struct orinoco_private *priv = pci_get_drvdata(pdev); orinoco_if_del(priv); wiphy_unregister(priv_to_wiphy(priv)); free_irq(pdev->irq, priv); free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_release_regions(pdev); pci_disable_device(pdev); } static const struct pci_device_id orinoco_pci_id_table[] = { /* Intersil Prism 3 */ {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, /* Intersil Prism 2.5 */ {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, /* Samsung MagicLAN SWL-2210P */ {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, {0,}, }; MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); static struct pci_driver orinoco_pci_driver = { .name = DRIVER_NAME, .id_table = orinoco_pci_id_table, .probe = orinoco_pci_init_one, .remove = orinoco_pci_remove_one, .suspend = orinoco_pci_suspend, .resume = orinoco_pci_resume, }; static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION " (Pavel Roskin <proski@gnu.org>," " David Gibson <hermes@gibson.dropbear.id.au> &" " Jean Tourrilhes <jt@hpl.hp.com>)"; MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &" " David Gibson <hermes@gibson.dropbear.id.au>"); MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_pci_init(void) { printk(KERN_DEBUG "%s\n", version); return pci_register_driver(&orinoco_pci_driver); } static void __exit orinoco_pci_exit(void) { pci_unregister_driver(&orinoco_pci_driver); } module_init(orinoco_pci_init); module_exit(orinoco_pci_exit); /* * Local variables: * c-indent-level: 8 * c-basic-offset: 8 * tab-width: 8 * End: */