| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Bing Zhao | 4318 | 37.51% | 5 | 4.27% |
| Xinming Hu | 2085 | 18.11% | 18 | 15.38% |
| Amitkumar Karwar | 1923 | 16.70% | 31 | 26.50% |
| Zhaoyang Liu | 1506 | 13.08% | 6 | 5.13% |
| Yogesh Ashok Powar | 810 | 7.04% | 5 | 4.27% |
| Avinash Patil | 241 | 2.09% | 12 | 10.26% |
| Daniel Drake | 94 | 0.82% | 1 | 0.85% |
| Brian Norris | 71 | 0.62% | 8 | 6.84% |
| Arend Van Spriel | 59 | 0.51% | 1 | 0.85% |
| Arnd Bergmann | 59 | 0.51% | 1 | 0.85% |
| Insu Yun | 53 | 0.46% | 1 | 0.85% |
| Ganapathi Bhat | 52 | 0.45% | 2 | 1.71% |
| Javier Martinez Canillas | 48 | 0.42% | 6 | 5.13% |
| Hemantkumar Suthar | 29 | 0.25% | 1 | 0.85% |
| Tamás Szűcs | 29 | 0.25% | 1 | 0.85% |
| Cathy Luo | 27 | 0.23% | 1 | 0.85% |
| Devidas Puranik | 26 | 0.23% | 1 | 0.85% |
| Andreas Fenkart | 12 | 0.10% | 1 | 0.85% |
| Kees Cook | 10 | 0.09% | 1 | 0.85% |
| Rajat Jain | 8 | 0.07% | 2 | 1.71% |
| WarheadsSE | 7 | 0.06% | 1 | 0.85% |
| Marty Faltesek | 7 | 0.06% | 1 | 0.85% |
| Aniket Nagarnaik | 7 | 0.06% | 1 | 0.85% |
| Maithili Hinge | 6 | 0.05% | 1 | 0.85% |
| Tobias Waldekranz | 6 | 0.05% | 1 | 0.85% |
| Chunfan Chen | 5 | 0.04% | 1 | 0.85% |
| Shawn Lin | 3 | 0.03% | 1 | 0.85% |
| Tomasz Moń | 3 | 0.03% | 1 | 0.85% |
| Tejun Heo | 3 | 0.03% | 1 | 0.85% |
| Wei-Ning Huang | 3 | 0.03% | 1 | 0.85% |
| Christoph Fritz | 2 | 0.02% | 1 | 0.85% |
| Doug Anderson | 1 | 0.01% | 1 | 0.85% |
| Total | 11513 | 117 |
/* * Marvell Wireless LAN device driver: SDIO specific handling * * Copyright (C) 2011-2014, Marvell International Ltd. * * This software file (the "File") is distributed by Marvell International * Ltd. under the terms of the GNU General Public License Version 2, June 1991 * (the "License"). You may use, redistribute and/or modify this File in * accordance with the terms and conditions of the License, a copy of which * is available by writing to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. * * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE * ARE EXPRESSLY DISCLAIMED. The License provides additional details about * this warranty disclaimer. */ #include <linux/firmware.h> #include "decl.h" #include "ioctl.h" #include "util.h" #include "fw.h" #include "main.h" #include "wmm.h" #include "11n.h" #include "sdio.h" #define SDIO_VERSION "1.0" static void mwifiex_sdio_work(struct work_struct *work); static struct mwifiex_if_ops sdio_ops; static struct memory_type_mapping generic_mem_type_map[] = { {"DUMP", NULL, 0, 0xDD}, }; static struct memory_type_mapping mem_type_mapping_tbl[] = { {"ITCM", NULL, 0, 0xF0}, {"DTCM", NULL, 0, 0xF1}, {"SQRAM", NULL, 0, 0xF2}, {"APU", NULL, 0, 0xF3}, {"CIU", NULL, 0, 0xF4}, {"ICU", NULL, 0, 0xF5}, {"MAC", NULL, 0, 0xF6}, {"EXT7", NULL, 0, 0xF7}, {"EXT8", NULL, 0, 0xF8}, {"EXT9", NULL, 0, 0xF9}, {"EXT10", NULL, 0, 0xFA}, {"EXT11", NULL, 0, 0xFB}, {"EXT12", NULL, 0, 0xFC}, {"EXT13", NULL, 0, 0xFD}, {"EXTLAST", NULL, 0, 0xFE}, }; static const struct of_device_id mwifiex_sdio_of_match_table[] = { { .compatible = "marvell,sd8897" }, { .compatible = "marvell,sd8997" }, { } }; /* This function parse device tree node using mmc subnode devicetree API. * The device node is saved in card->plt_of_node. * if the device tree node exist and include interrupts attributes, this * function will also request platform specific wakeup interrupt. */ static int mwifiex_sdio_probe_of(struct device *dev) { if (!of_match_node(mwifiex_sdio_of_match_table, dev->of_node)) { dev_err(dev, "required compatible string missing\n"); return -EINVAL; } return 0; } /* * SDIO probe. * * This function probes an mwifiex device and registers it. It allocates * the card structure, enables SDIO function number and initiates the * device registration and initialization procedure by adding a logical * interface. */ static int mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { int ret; struct sdio_mmc_card *card = NULL; pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n", func->vendor, func->device, func->class, func->num); card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL); if (!card) return -ENOMEM; init_completion(&card->fw_done); card->func = func; func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; if (id->driver_data) { struct mwifiex_sdio_device *data = (void *)id->driver_data; card->firmware = data->firmware; card->reg = data->reg; card->max_ports = data->max_ports; card->mp_agg_pkt_limit = data->mp_agg_pkt_limit; card->supports_sdio_new_mode = data->supports_sdio_new_mode; card->has_control_mask = data->has_control_mask; card->tx_buf_size = data->tx_buf_size; card->mp_tx_agg_buf_size = data->mp_tx_agg_buf_size; card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size; card->can_dump_fw = data->can_dump_fw; card->fw_dump_enh = data->fw_dump_enh; card->can_auto_tdls = data->can_auto_tdls; card->can_ext_scan = data->can_ext_scan; INIT_WORK(&card->work, mwifiex_sdio_work); } sdio_claim_host(func); ret = sdio_enable_func(func); sdio_release_host(func); if (ret) { dev_err(&func->dev, "failed to enable function\n"); return ret; } /* device tree node parsing and platform specific configuration*/ if (func->dev.of_node) { ret = mwifiex_sdio_probe_of(&func->dev); if (ret) goto err_disable; } ret = mwifiex_add_card(card, &card->fw_done, &sdio_ops, MWIFIEX_SDIO, &func->dev); if (ret) { dev_err(&func->dev, "add card failed\n"); goto err_disable; } return 0; err_disable: sdio_claim_host(func); sdio_disable_func(func); sdio_release_host(func); return ret; } /* * SDIO resume. * * Kernel needs to suspend all functions separately. Therefore all * registered functions must have drivers with suspend and resume * methods. Failing that the kernel simply removes the whole card. * * If already not resumed, this function turns on the traffic and * sends a host sleep cancel request to the firmware. */ static int mwifiex_sdio_resume(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; card = sdio_get_drvdata(func); if (!card || !card->adapter) { dev_err(dev, "resume: invalid card or adapter\n"); return 0; } adapter = card->adapter; if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { mwifiex_dbg(adapter, WARN, "device already resumed\n"); return 0; } clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); /* Disable Host Sleep */ mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), MWIFIEX_SYNC_CMD); mwifiex_disable_wake(adapter); return 0; } /* Write data into SDIO card register. Caller claims SDIO device. */ static int mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data) { int ret = -1; sdio_writeb(func, data, reg, &ret); return ret; } /* This function writes data into SDIO card register. */ static int mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data) { struct sdio_mmc_card *card = adapter->card; int ret; sdio_claim_host(card->func); ret = mwifiex_write_reg_locked(card->func, reg, data); sdio_release_host(card->func); return ret; } /* This function reads data from SDIO card register. */ static int mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data) { struct sdio_mmc_card *card = adapter->card; int ret = -1; u8 val; sdio_claim_host(card->func); val = sdio_readb(card->func, reg, &ret); sdio_release_host(card->func); *data = val; return ret; } /* This function writes multiple data into SDIO card memory. * * This does not work in suspended mode. */ static int mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, u32 pkt_len, u32 port) { struct sdio_mmc_card *card = adapter->card; int ret; u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (pkt_len / MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len; u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { mwifiex_dbg(adapter, ERROR, "%s: not allowed while suspended\n", __func__); return -1; } sdio_claim_host(card->func); ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size); sdio_release_host(card->func); return ret; } /* This function reads multiple data from SDIO card memory. */ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, u32 len, u32 port, u8 claim) { struct sdio_mmc_card *card = adapter->card; int ret; u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE) : len; u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); if (claim) sdio_claim_host(card->func); ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size); if (claim) sdio_release_host(card->func); return ret; } /* This function reads the firmware status. */ static int mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; u8 fws0, fws1; if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0)) return -1; if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1)) return -1; *dat = (u16)((fws1 << 8) | fws0); return 0; } /* This function checks the firmware status in card. */ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) { int ret = 0; u16 firmware_stat; u32 tries; for (tries = 0; tries < poll_num; tries++) { ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); if (ret) continue; if (firmware_stat == FIRMWARE_READY_SDIO) { ret = 0; break; } msleep(100); ret = -1; } return ret; } /* This function checks if WLAN is the winner. */ static int mwifiex_check_winner_status(struct mwifiex_adapter *adapter) { int ret = 0; u8 winner = 0; struct sdio_mmc_card *card = adapter->card; if (mwifiex_read_reg(adapter, card->reg->status_reg_0, &winner)) return -1; if (winner) adapter->winner = 0; else adapter->winner = 1; return ret; } /* * SDIO remove. * * This function removes the interface and frees up the card structure. */ static void mwifiex_sdio_remove(struct sdio_func *func) { struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; struct mwifiex_private *priv; int ret = 0; u16 firmware_stat; card = sdio_get_drvdata(func); if (!card) return; wait_for_completion(&card->fw_done); adapter = card->adapter; if (!adapter || !adapter->priv_num) return; mwifiex_dbg(adapter, INFO, "info: SDIO func num=%d\n", func->num); ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); if (!ret && firmware_stat == FIRMWARE_READY_SDIO && !adapter->mfg_mode) { mwifiex_deauthenticate_all(adapter); priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); mwifiex_disable_auto_ds(priv); mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN); } mwifiex_remove_card(adapter); } /* * SDIO suspend. * * Kernel needs to suspend all functions separately. Therefore all * registered functions must have drivers with suspend and resume * methods. Failing that the kernel simply removes the whole card. * * If already not suspended, this function allocates and sends a host * sleep activate request to the firmware and turns off the traffic. */ static int mwifiex_sdio_suspend(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; mmc_pm_flag_t pm_flag = 0; int ret = 0; pm_flag = sdio_get_host_pm_caps(func); pr_debug("cmd: %s: suspend: PM flag = 0x%x\n", sdio_func_id(func), pm_flag); if (!(pm_flag & MMC_PM_KEEP_POWER)) { dev_err(dev, "%s: cannot remain alive while host is" " suspended\n", sdio_func_id(func)); return -ENOSYS; } card = sdio_get_drvdata(func); if (!card) { dev_err(dev, "suspend: invalid card\n"); return 0; } /* Might still be loading firmware */ wait_for_completion(&card->fw_done); adapter = card->adapter; if (!adapter) { dev_err(dev, "adapter is not valid\n"); return 0; } mwifiex_enable_wake(adapter); /* Enable the Host Sleep */ if (!mwifiex_enable_hs(adapter)) { mwifiex_dbg(adapter, ERROR, "cmd: failed to suspend\n"); clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); mwifiex_disable_wake(adapter); return -EFAULT; } mwifiex_dbg(adapter, INFO, "cmd: suspend with MMC_PM_KEEP_POWER\n"); ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); /* Indicate device suspended */ set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); return ret; } static void mwifiex_sdio_coredump(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); struct sdio_mmc_card *card; card = sdio_get_drvdata(func); if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags)) schedule_work(&card->work); } /* Device ID for SD8786 */ #define SDIO_DEVICE_ID_MARVELL_8786 (0x9116) /* Device ID for SD8787 */ #define SDIO_DEVICE_ID_MARVELL_8787 (0x9119) /* Device ID for SD8797 */ #define SDIO_DEVICE_ID_MARVELL_8797 (0x9129) /* Device ID for SD8897 */ #define SDIO_DEVICE_ID_MARVELL_8897 (0x912d) /* Device ID for SD8887 */ #define SDIO_DEVICE_ID_MARVELL_8887 (0x9135) /* Device ID for SD8801 */ #define SDIO_DEVICE_ID_MARVELL_8801 (0x9139) /* Device ID for SD8977 */ #define SDIO_DEVICE_ID_MARVELL_8977 (0x9145) /* Device ID for SD8987 */ #define SDIO_DEVICE_ID_MARVELL_8987 (0x9149) /* Device ID for SD8997 */ #define SDIO_DEVICE_ID_MARVELL_8997 (0x9141) /* WLAN IDs */ static const struct sdio_device_id mwifiex_ids[] = { {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786), .driver_data = (unsigned long) &mwifiex_sdio_sd8786}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787), .driver_data = (unsigned long) &mwifiex_sdio_sd8787}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797), .driver_data = (unsigned long) &mwifiex_sdio_sd8797}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897), .driver_data = (unsigned long) &mwifiex_sdio_sd8897}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887), .driver_data = (unsigned long)&mwifiex_sdio_sd8887}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801), .driver_data = (unsigned long)&mwifiex_sdio_sd8801}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977), .driver_data = (unsigned long)&mwifiex_sdio_sd8977}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987), .driver_data = (unsigned long)&mwifiex_sdio_sd8987}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997), .driver_data = (unsigned long)&mwifiex_sdio_sd8997}, {}, }; MODULE_DEVICE_TABLE(sdio, mwifiex_ids); static const struct dev_pm_ops mwifiex_sdio_pm_ops = { .suspend = mwifiex_sdio_suspend, .resume = mwifiex_sdio_resume, }; static struct sdio_driver mwifiex_sdio = { .name = "mwifiex_sdio", .id_table = mwifiex_ids, .probe = mwifiex_sdio_probe, .remove = mwifiex_sdio_remove, .drv = { .owner = THIS_MODULE, .coredump = mwifiex_sdio_coredump, .pm = &mwifiex_sdio_pm_ops, } }; /* * This function wakes up the card. * * A host power up command is written to the card configuration * register to wake up the card. */ static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) { mwifiex_dbg(adapter, EVENT, "event: wakeup device...\n"); return mwifiex_write_reg(adapter, CONFIGURATION_REG, HOST_POWER_UP); } /* * This function is called after the card has woken up. * * The card configuration register is reset. */ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) { mwifiex_dbg(adapter, EVENT, "cmd: wakeup device completed\n"); return mwifiex_write_reg(adapter, CONFIGURATION_REG, 0); } static int mwifiex_sdio_dnld_fw(struct mwifiex_adapter *adapter, struct mwifiex_fw_image *fw) { struct sdio_mmc_card *card = adapter->card; int ret; sdio_claim_host(card->func); ret = mwifiex_dnld_fw(adapter, fw); sdio_release_host(card->func); return ret; } /* * This function is used to initialize IO ports for the * chipsets supporting SDIO new mode eg SD8897. */ static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter) { u8 reg; struct sdio_mmc_card *card = adapter->card; adapter->ioport = MEM_PORT; /* enable sdio new mode */ if (mwifiex_read_reg(adapter, card->reg->card_cfg_2_1_reg, ®)) return -1; if (mwifiex_write_reg(adapter, card->reg->card_cfg_2_1_reg, reg | CMD53_NEW_MODE)) return -1; /* Configure cmd port and enable reading rx length from the register */ if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_0, ®)) return -1; if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_0, reg | CMD_PORT_RD_LEN_EN)) return -1; /* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is * completed */ if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_1, ®)) return -1; if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_1, reg | CMD_PORT_AUTO_EN)) return -1; return 0; } /* This function initializes the IO ports. * * The following operations are performed - * - Read the IO ports (0, 1 and 2) * - Set host interrupt Reset-To-Read to clear * - Set auto re-enable interrupt */ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter) { u8 reg; struct sdio_mmc_card *card = adapter->card; adapter->ioport = 0; if (card->supports_sdio_new_mode) { if (mwifiex_init_sdio_new_mode(adapter)) return -1; goto cont; } /* Read the IO port */ if (!mwifiex_read_reg(adapter, card->reg->io_port_0_reg, ®)) adapter->ioport |= (reg & 0xff); else return -1; if (!mwifiex_read_reg(adapter, card->reg->io_port_1_reg, ®)) adapter->ioport |= ((reg & 0xff) << 8); else return -1; if (!mwifiex_read_reg(adapter, card->reg->io_port_2_reg, ®)) adapter->ioport |= ((reg & 0xff) << 16); else return -1; cont: mwifiex_dbg(adapter, INFO, "info: SDIO FUNC1 IO port: %#x\n", adapter->ioport); /* Set Host interrupt reset to read to clear */ if (!mwifiex_read_reg(adapter, card->reg->host_int_rsr_reg, ®)) mwifiex_write_reg(adapter, card->reg->host_int_rsr_reg, reg | card->reg->sdio_int_mask); else return -1; /* Dnld/Upld ready set to auto reset */ if (!mwifiex_read_reg(adapter, card->reg->card_misc_cfg_reg, ®)) mwifiex_write_reg(adapter, card->reg->card_misc_cfg_reg, reg | AUTO_RE_ENABLE_INT); else return -1; return 0; } /* * This function sends data to the card. */ static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter, u8 *payload, u32 pkt_len, u32 port) { u32 i = 0; int ret; do { ret = mwifiex_write_data_sync(adapter, payload, pkt_len, port); if (ret) { i++; mwifiex_dbg(adapter, ERROR, "host_to_card, write iomem\t" "(%d) failed: %d\n", i, ret); if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04)) mwifiex_dbg(adapter, ERROR, "write CFG reg failed\n"); ret = -1; if (i > MAX_WRITE_IOMEM_RETRY) return ret; } } while (ret == -1); return ret; } /* * This function gets the read port. * * If control port bit is set in MP read bitmap, the control port * is returned, otherwise the current read port is returned and * the value is increased (provided it does not reach the maximum * limit, in which case it is reset to 1) */ static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; u32 rd_bitmap = card->mp_rd_bitmap; mwifiex_dbg(adapter, DATA, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap); if (card->supports_sdio_new_mode) { if (!(rd_bitmap & reg->data_port_mask)) return -1; } else { if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask))) return -1; } if ((card->has_control_mask) && (card->mp_rd_bitmap & CTRL_PORT_MASK)) { card->mp_rd_bitmap &= (u32) (~CTRL_PORT_MASK); *port = CTRL_PORT; mwifiex_dbg(adapter, DATA, "data: port=%d mp_rd_bitmap=0x%08x\n", *port, card->mp_rd_bitmap); return 0; } if (!(card->mp_rd_bitmap & (1 << card->curr_rd_port))) return -1; /* We are now handling the SDIO data ports */ card->mp_rd_bitmap &= (u32)(~(1 << card->curr_rd_port)); *port = card->curr_rd_port; if (++card->curr_rd_port == card->max_ports) card->curr_rd_port = reg->start_rd_port; mwifiex_dbg(adapter, DATA, "data: port=%d mp_rd_bitmap=0x%08x -> 0x%08x\n", *port, rd_bitmap, card->mp_rd_bitmap); return 0; } /* * This function gets the write port for data. * * The current write port is returned if available and the value is * increased (provided it does not reach the maximum limit, in which * case it is reset to 1) */ static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u32 *port) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; u32 wr_bitmap = card->mp_wr_bitmap; mwifiex_dbg(adapter, DATA, "data: mp_wr_bitmap=0x%08x\n", wr_bitmap); if (!(wr_bitmap & card->mp_data_port_mask)) { adapter->data_sent = true; return -EBUSY; } if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) { card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port)); *port = card->curr_wr_port; if (++card->curr_wr_port == card->mp_end_port) card->curr_wr_port = reg->start_wr_port; } else { adapter->data_sent = true; return -EBUSY; } if ((card->has_control_mask) && (*port == CTRL_PORT)) { mwifiex_dbg(adapter, ERROR, "invalid data port=%d cur port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n", *port, card->curr_wr_port, wr_bitmap, card->mp_wr_bitmap); return -1; } mwifiex_dbg(adapter, DATA, "data: port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n", *port, wr_bitmap, card->mp_wr_bitmap); return 0; } /* * This function polls the card status. */ static int mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits) { struct sdio_mmc_card *card = adapter->card; u32 tries; u8 cs; for (tries = 0; tries < MAX_POLL_TRIES; tries++) { if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs)) break; else if ((cs & bits) == bits) return 0; usleep_range(10, 20); } mwifiex_dbg(adapter, ERROR, "poll card status failed, tries = %d\n", tries); return -1; } /* * This function disables the host interrupt. * * The host interrupt mask is read, the disable bit is reset and * written back to the card host interrupt mask register. */ static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; sdio_claim_host(func); mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, 0); sdio_release_irq(func); sdio_release_host(func); } /* * This function reads the interrupt status from card. */ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; u8 sdio_ireg; unsigned long flags; if (mwifiex_read_data_sync(adapter, card->mp_regs, card->reg->max_mp_regs, REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0)) { mwifiex_dbg(adapter, ERROR, "read mp_regs failed\n"); return; } sdio_ireg = card->mp_regs[card->reg->host_int_status_reg]; if (sdio_ireg) { /* * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS * For SDIO new mode CMD port interrupts * DN_LD_CMD_PORT_HOST_INT_STATUS and/or * UP_LD_CMD_PORT_HOST_INT_STATUS * Clear the interrupt status register */ mwifiex_dbg(adapter, INTR, "int: sdio_ireg = %#x\n", sdio_ireg); spin_lock_irqsave(&adapter->int_lock, flags); adapter->int_status |= sdio_ireg; spin_unlock_irqrestore(&adapter->int_lock, flags); } } /* * SDIO interrupt handler. * * This function reads the interrupt status from firmware and handles * the interrupt in current thread (ksdioirqd) right away. */ static void mwifiex_sdio_interrupt(struct sdio_func *func) { struct mwifiex_adapter *adapter; struct sdio_mmc_card *card; card = sdio_get_drvdata(func); if (!card || !card->adapter) { pr_err("int: func=%p card=%p adapter=%p\n", func, card, card ? card->adapter : NULL); return; } adapter = card->adapter; if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP) adapter->ps_state = PS_STATE_AWAKE; mwifiex_interrupt_status(adapter); mwifiex_main_process(adapter); } /* * This function enables the host interrupt. * * The host interrupt enable mask is written to the card * host interrupt mask register. */ static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; int ret; sdio_claim_host(func); /* Request the SDIO IRQ */ ret = sdio_claim_irq(func, mwifiex_sdio_interrupt); if (ret) { mwifiex_dbg(adapter, ERROR, "claim irq failed: ret=%d\n", ret); goto out; } /* Simply write the mask to the register */ ret = mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, card->reg->host_int_enable); if (ret) { mwifiex_dbg(adapter, ERROR, "enable host interrupt failed\n"); sdio_release_irq(func); } out: sdio_release_host(func); return ret; } /* * This function sends a data buffer to the card. */ static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter, u32 *type, u8 *buffer, u32 npayload, u32 ioport) { int ret; u32 nb; if (!buffer) { mwifiex_dbg(adapter, ERROR, "%s: buffer is NULL\n", __func__); return -1; } ret = mwifiex_read_data_sync(adapter, buffer, npayload, ioport, 1); if (ret) { mwifiex_dbg(adapter, ERROR, "%s: read iomem failed: %d\n", __func__, ret); return -1; } nb = get_unaligned_le16((buffer)); if (nb > npayload) { mwifiex_dbg(adapter, ERROR, "%s: invalid packet, nb=%d npayload=%d\n", __func__, nb, npayload); return -1; } *type = get_unaligned_le16((buffer + 2)); return ret; } /* * This function downloads the firmware to the card. * * Firmware is downloaded to the card in blocks. Every block download * is tested for CRC errors, and retried a number of times before * returning failure. */ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, struct mwifiex_fw_image *fw) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; int ret; u8 *firmware = fw->fw_buf; u32 firmware_len = fw->fw_len; u32 offset = 0; u8 base0, base1; u8 *fwbuf; u16 len = 0; u32 txlen, tx_blocks = 0, tries; u32 i = 0; if (!firmware_len) { mwifiex_dbg(adapter, ERROR, "firmware image not found! Terminating download\n"); return -1; } mwifiex_dbg(adapter, INFO, "info: downloading FW image (%d bytes)\n", firmware_len); /* Assume that the allocated buffer is 8-byte aligned */ fwbuf = kzalloc(MWIFIEX_UPLD_SIZE, GFP_KERNEL); if (!fwbuf) return -ENOMEM; sdio_claim_host(card->func); /* Perform firmware data transfer */ do { /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY bits */ ret = mwifiex_sdio_poll_card_status(adapter, CARD_IO_READY | DN_LD_CARD_RDY); if (ret) { mwifiex_dbg(adapter, ERROR, "FW download with helper:\t" "poll status timeout @ %d\n", offset); goto done; } /* More data? */ if (offset >= firmware_len) break; for (tries = 0; tries < MAX_POLL_TRIES; tries++) { ret = mwifiex_read_reg(adapter, reg->base_0_reg, &base0); if (ret) { mwifiex_dbg(adapter, ERROR, "dev BASE0 register read failed:\t" "base0=%#04X(%d). Terminating dnld\n", base0, base0); goto done; } ret = mwifiex_read_reg(adapter, reg->base_1_reg, &base1); if (ret) { mwifiex_dbg(adapter, ERROR, "dev BASE1 register read failed:\t" "base1=%#04X(%d). Terminating dnld\n", base1, base1); goto done; } len = (u16) (((base1 & 0xff) << 8) | (base0 & 0xff)); if (len) break; usleep_range(10, 20); } if (!len) { break; } else if (len > MWIFIEX_UPLD_SIZE) { mwifiex_dbg(adapter, ERROR, "FW dnld failed @ %d, invalid length %d\n", offset, len); ret = -1; goto done; } txlen = len; if (len & BIT(0)) { i++; if (i > MAX_WRITE_IOMEM_RETRY) { mwifiex_dbg(adapter, ERROR, "FW dnld failed @ %d, over max retry\n", offset); ret = -1; goto done; } mwifiex_dbg(adapter, ERROR, "CRC indicated by the helper:\t" "len = 0x%04X, txlen = %d\n", len, txlen); len &= ~BIT(0); /* Setting this to 0 to resend from same offset */ txlen = 0; } else { i = 0; /* Set blocksize to transfer - checking for last block */ if (firmware_len - offset < txlen) txlen = firmware_len - offset; tx_blocks = (txlen + MWIFIEX_SDIO_BLOCK_SIZE - 1) / MWIFIEX_SDIO_BLOCK_SIZE; /* Copy payload to buffer */ memmove(fwbuf, &firmware[offset], txlen); } ret = mwifiex_write_data_sync(adapter, fwbuf, tx_blocks * MWIFIEX_SDIO_BLOCK_SIZE, adapter->ioport); if (ret) { mwifiex_dbg(adapter, ERROR, "FW download, write iomem (%d) failed @ %d\n", i, offset); if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04)) mwifiex_dbg(adapter, ERROR, "write CFG reg failed\n"); ret = -1; goto done; } offset += txlen; } while (true); mwifiex_dbg(adapter, MSG, "info: FW download over, size %d bytes\n", offset); ret = 0; done: sdio_release_host(card->func); kfree(fwbuf); return ret; } /* * This function decode sdio aggreation pkt. * * Based on the the data block size and pkt_len, * skb data will be decoded to few packets. */ static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter, struct sk_buff *skb) { u32 total_pkt_len, pkt_len; struct sk_buff *skb_deaggr; u16 blk_size; u8 blk_num; u8 *data; data = skb->data; total_pkt_len = skb->len; while (total_pkt_len >= (SDIO_HEADER_OFFSET + adapter->intf_hdr_len)) { if (total_pkt_len < adapter->sdio_rx_block_size) break; blk_num = *(data + BLOCK_NUMBER_OFFSET); blk_size = adapter->sdio_rx_block_size * blk_num; if (blk_size > total_pkt_len) { mwifiex_dbg(adapter, ERROR, "%s: error in blk_size,\t" "blk_num=%d, blk_size=%d, total_pkt_len=%d\n", __func__, blk_num, blk_size, total_pkt_len); break; } pkt_len = get_unaligned_le16((data + SDIO_HEADER_OFFSET)); if ((pkt_len + SDIO_HEADER_OFFSET) > blk_size) { mwifiex_dbg(adapter, ERROR, "%s: error in pkt_len,\t" "pkt_len=%d, blk_size=%d\n", __func__, pkt_len, blk_size); break; } skb_deaggr = mwifiex_alloc_dma_align_buf(pkt_len, GFP_KERNEL); if (!skb_deaggr) break; skb_put(skb_deaggr, pkt_len); memcpy(skb_deaggr->data, data + SDIO_HEADER_OFFSET, pkt_len); skb_pull(skb_deaggr, adapter->intf_hdr_len); mwifiex_handle_rx_packet(adapter, skb_deaggr); data += blk_size; total_pkt_len -= blk_size; } } /* * This function decodes a received packet. * * Based on the type, the packet is treated as either a data, or * a command response, or an event, and the correct handler * function is invoked. */ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb, u32 upld_typ) { u8 *cmd_buf; u16 pkt_len; struct mwifiex_rxinfo *rx_info; pkt_len = get_unaligned_le16(skb->data); if (upld_typ != MWIFIEX_TYPE_AGGR_DATA) { skb_trim(skb, pkt_len); skb_pull(skb, adapter->intf_hdr_len); } switch (upld_typ) { case MWIFIEX_TYPE_AGGR_DATA: mwifiex_dbg(adapter, INFO, "info: --- Rx: Aggr Data packet ---\n"); rx_info = MWIFIEX_SKB_RXCB(skb); rx_info->buf_type = MWIFIEX_TYPE_AGGR_DATA; if (adapter->rx_work_enabled) { skb_queue_tail(&adapter->rx_data_q, skb); atomic_inc(&adapter->rx_pending); adapter->data_received = true; } else { mwifiex_deaggr_sdio_pkt(adapter, skb); dev_kfree_skb_any(skb); } break; case MWIFIEX_TYPE_DATA: mwifiex_dbg(adapter, DATA, "info: --- Rx: Data packet ---\n"); if (adapter->rx_work_enabled) { skb_queue_tail(&adapter->rx_data_q, skb); adapter->data_received = true; atomic_inc(&adapter->rx_pending); } else { mwifiex_handle_rx_packet(adapter, skb); } break; case MWIFIEX_TYPE_CMD: mwifiex_dbg(adapter, CMD, "info: --- Rx: Cmd Response ---\n"); /* take care of curr_cmd = NULL case */ if (!adapter->curr_cmd) { cmd_buf = adapter->upld_buf; if (adapter->ps_state == PS_STATE_SLEEP_CFM) mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); memcpy(cmd_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); dev_kfree_skb_any(skb); } else { adapter->cmd_resp_received = true; adapter->curr_cmd->resp_skb = skb; } break; case MWIFIEX_TYPE_EVENT: mwifiex_dbg(adapter, EVENT, "info: --- Rx: Event ---\n"); adapter->event_cause = get_unaligned_le32(skb->data); if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE)) memcpy(adapter->event_body, skb->data + MWIFIEX_EVENT_HEADER_LEN, skb->len); /* event cause has been saved to adapter->event_cause */ adapter->event_received = true; adapter->event_skb = skb; break; default: mwifiex_dbg(adapter, ERROR, "unknown upload type %#x\n", upld_typ); dev_kfree_skb_any(skb); break; } return 0; } /* * This function transfers received packets from card to driver, performing * aggregation if required. * * For data received on control port, or if aggregation is disabled, the * received buffers are uploaded as separate packets. However, if aggregation * is enabled and required, the buffers are copied onto an aggregation buffer, * provided there is space left, processed and finally uploaded. */ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter, u16 rx_len, u8 port) { struct sdio_mmc_card *card = adapter->card; s32 f_do_rx_aggr = 0; s32 f_do_rx_cur = 0; s32 f_aggr_cur = 0; s32 f_post_aggr_cur = 0; struct sk_buff *skb_deaggr; struct sk_buff *skb = NULL; u32 pkt_len, pkt_type, mport, pind; u8 *curr_ptr; if ((card->has_control_mask) && (port == CTRL_PORT)) { /* Read the command Resp without aggr */ mwifiex_dbg(adapter, CMD, "info: %s: no aggregation for cmd\t" "response\n", __func__); f_do_rx_cur = 1; goto rx_curr_single; } if (!card->mpa_rx.enabled) { mwifiex_dbg(adapter, WARN, "info: %s: rx aggregation disabled\n", __func__); f_do_rx_cur = 1; goto rx_curr_single; } if ((!card->has_control_mask && (card->mp_rd_bitmap & card->reg->data_port_mask)) || (card->has_control_mask && (card->mp_rd_bitmap & (~((u32) CTRL_PORT_MASK))))) { /* Some more data RX pending */ mwifiex_dbg(adapter, INFO, "info: %s: not last packet\n", __func__); if (MP_RX_AGGR_IN_PROGRESS(card)) { if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len)) { f_aggr_cur = 1; } else { /* No room in Aggr buf, do rx aggr now */ f_do_rx_aggr = 1; f_post_aggr_cur = 1; } } else { /* Rx aggr not in progress */ f_aggr_cur = 1; } } else { /* No more data RX pending */ mwifiex_dbg(adapter, INFO, "info: %s: last packet\n", __func__); if (MP_RX_AGGR_IN_PROGRESS(card)) { f_do_rx_aggr = 1; if (MP_RX_AGGR_BUF_HAS_ROOM(card, rx_len)) f_aggr_cur = 1; else /* No room in Aggr buf, do rx aggr now */ f_do_rx_cur = 1; } else { f_do_rx_cur = 1; } } if (f_aggr_cur) { mwifiex_dbg(adapter, INFO, "info: current packet aggregation\n"); /* Curr pkt can be aggregated */ mp_rx_aggr_setup(card, rx_len, port); if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) || mp_rx_aggr_port_limit_reached(card)) { mwifiex_dbg(adapter, INFO, "info: %s: aggregated packet\t" "limit reached\n", __func__); /* No more pkts allowed in Aggr buf, rx it */ f_do_rx_aggr = 1; } } if (f_do_rx_aggr) { /* do aggr RX now */ mwifiex_dbg(adapter, DATA, "info: do_rx_aggr: num of packets: %d\n", card->mpa_rx.pkt_cnt); if (card->supports_sdio_new_mode) { int i; u32 port_count; for (i = 0, port_count = 0; i < card->max_ports; i++) if (card->mpa_rx.ports & BIT(i)) port_count++; /* Reading data from "start_port + 0" to "start_port + * port_count -1", so decrease the count by 1 */ port_count--; mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | (port_count << 8)) + card->mpa_rx.start_port; } else { mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | (card->mpa_rx.ports << 4)) + card->mpa_rx.start_port; } if (card->mpa_rx.pkt_cnt == 1) mport = adapter->ioport + card->mpa_rx.start_port; if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf, card->mpa_rx.buf_len, mport, 1)) goto error; curr_ptr = card->mpa_rx.buf; for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) { u32 *len_arr = card->mpa_rx.len_arr; /* get curr PKT len & type */ pkt_len = get_unaligned_le16(&curr_ptr[0]); pkt_type = get_unaligned_le16(&curr_ptr[2]); /* copy pkt to deaggr buf */ skb_deaggr = mwifiex_alloc_dma_align_buf(len_arr[pind], GFP_KERNEL); if (!skb_deaggr) { mwifiex_dbg(adapter, ERROR, "skb allocation failure\t" "drop pkt len=%d type=%d\n", pkt_len, pkt_type); curr_ptr += len_arr[pind]; continue; } skb_put(skb_deaggr, len_arr[pind]); if ((pkt_type == MWIFIEX_TYPE_DATA || (pkt_type == MWIFIEX_TYPE_AGGR_DATA && adapter->sdio_rx_aggr_enable)) && (pkt_len <= len_arr[pind])) { memcpy(skb_deaggr->data, curr_ptr, pkt_len); skb_trim(skb_deaggr, pkt_len); /* Process de-aggr packet */ mwifiex_decode_rx_packet(adapter, skb_deaggr, pkt_type); } else { mwifiex_dbg(adapter, ERROR, "drop wrong aggr pkt:\t" "sdio_single_port_rx_aggr=%d\t" "type=%d len=%d max_len=%d\n", adapter->sdio_rx_aggr_enable, pkt_type, pkt_len, len_arr[pind]); dev_kfree_skb_any(skb_deaggr); } curr_ptr += len_arr[pind]; } MP_RX_AGGR_BUF_RESET(card); } rx_curr_single: if (f_do_rx_cur) { mwifiex_dbg(adapter, INFO, "info: RX: port: %d, rx_len: %d\n", port, rx_len); skb = mwifiex_alloc_dma_align_buf(rx_len, GFP_KERNEL); if (!skb) { mwifiex_dbg(adapter, ERROR, "single skb allocated fail,\t" "drop pkt port=%d len=%d\n", port, rx_len); if (mwifiex_sdio_card_to_host(adapter, &pkt_type, card->mpa_rx.buf, rx_len, adapter->ioport + port)) goto error; return 0; } skb_put(skb, rx_len); if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data, skb->len, adapter->ioport + port)) goto error; if (!adapter->sdio_rx_aggr_enable && pkt_type == MWIFIEX_TYPE_AGGR_DATA) { mwifiex_dbg(adapter, ERROR, "drop wrong pkt type %d\t" "current SDIO RX Aggr not enabled\n", pkt_type); dev_kfree_skb_any(skb); return 0; } mwifiex_decode_rx_packet(adapter, skb, pkt_type); } if (f_post_aggr_cur) { mwifiex_dbg(adapter, INFO, "info: current packet aggregation\n"); /* Curr pkt can be aggregated */ mp_rx_aggr_setup(card, rx_len, port); } return 0; error: if (MP_RX_AGGR_IN_PROGRESS(card)) MP_RX_AGGR_BUF_RESET(card); if (f_do_rx_cur && skb) /* Single transfer pending. Free curr buff also */ dev_kfree_skb_any(skb); return -1; } /* * This function checks the current interrupt status. * * The following interrupts are checked and handled by this function - * - Data sent * - Command sent * - Packets received * * Since the firmware does not generate download ready interrupt if the * port updated is command port only, command sent interrupt checking * should be done manually, and for every SDIO interrupt. * * In case of Rx packets received, the packets are uploaded from card to * host and processed accordingly. */ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; int ret = 0; u8 sdio_ireg; struct sk_buff *skb; u8 port = CTRL_PORT; u32 len_reg_l, len_reg_u; u32 rx_blocks; u16 rx_len; unsigned long flags; u32 bitmap; u8 cr; spin_lock_irqsave(&adapter->int_lock, flags); sdio_ireg = adapter->int_status; adapter->int_status = 0; spin_unlock_irqrestore(&adapter->int_lock, flags); if (!sdio_ireg) return ret; /* Following interrupt is only for SDIO new mode */ if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent) adapter->cmd_sent = false; /* Following interrupt is only for SDIO new mode */ if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) { u32 pkt_type; /* read the len of control packet */ rx_len = card->mp_regs[reg->cmd_rd_len_1] << 8; rx_len |= (u16)card->mp_regs[reg->cmd_rd_len_0]; rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE); if (rx_len <= adapter->intf_hdr_len || (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) > MWIFIEX_RX_DATA_BUF_SIZE) return -1; rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE); mwifiex_dbg(adapter, INFO, "info: rx_len = %d\n", rx_len); skb = mwifiex_alloc_dma_align_buf(rx_len, GFP_KERNEL); if (!skb) return -1; skb_put(skb, rx_len); if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data, skb->len, adapter->ioport | CMD_PORT_SLCT)) { mwifiex_dbg(adapter, ERROR, "%s: failed to card_to_host", __func__); dev_kfree_skb_any(skb); goto term_cmd; } if ((pkt_type != MWIFIEX_TYPE_CMD) && (pkt_type != MWIFIEX_TYPE_EVENT)) mwifiex_dbg(adapter, ERROR, "%s:Received wrong packet on cmd port", __func__); mwifiex_decode_rx_packet(adapter, skb, pkt_type); } if (sdio_ireg & DN_LD_HOST_INT_STATUS) { bitmap = (u32) card->mp_regs[reg->wr_bitmap_l]; bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8; if (card->supports_sdio_new_mode) { bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_1l]) << 16; bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_1u]) << 24; } card->mp_wr_bitmap = bitmap; mwifiex_dbg(adapter, INTR, "int: DNLD: wr_bitmap=0x%x\n", card->mp_wr_bitmap); if (adapter->data_sent && (card->mp_wr_bitmap & card->mp_data_port_mask)) { mwifiex_dbg(adapter, INTR, "info: <--- Tx DONE Interrupt --->\n"); adapter->data_sent = false; } } /* As firmware will not generate download ready interrupt if the port updated is command port only, cmd_sent should be done for any SDIO interrupt. */ if (card->has_control_mask && adapter->cmd_sent) { /* Check if firmware has attach buffer at command port and update just that in wr_bit_map. */ card->mp_wr_bitmap |= (u32) card->mp_regs[reg->wr_bitmap_l] & CTRL_PORT_MASK; if (card->mp_wr_bitmap & CTRL_PORT_MASK) adapter->cmd_sent = false; } mwifiex_dbg(adapter, INTR, "info: cmd_sent=%d data_sent=%d\n", adapter->cmd_sent, adapter->data_sent); if (sdio_ireg & UP_LD_HOST_INT_STATUS) { bitmap = (u32) card->mp_regs[reg->rd_bitmap_l]; bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8; if (card->supports_sdio_new_mode) { bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_1l]) << 16; bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_1u]) << 24; } card->mp_rd_bitmap = bitmap; mwifiex_dbg(adapter, INTR, "int: UPLD: rd_bitmap=0x%x\n", card->mp_rd_bitmap); while (true) { ret = mwifiex_get_rd_port(adapter, &port); if (ret) { mwifiex_dbg(adapter, INFO, "info: no more rd_port available\n"); break; } len_reg_l = reg->rd_len_p0_l + (port << 1); len_reg_u = reg->rd_len_p0_u + (port << 1); rx_len = ((u16) card->mp_regs[len_reg_u]) << 8; rx_len |= (u16) card->mp_regs[len_reg_l]; mwifiex_dbg(adapter, INFO, "info: RX: port=%d rx_len=%u\n", port, rx_len); rx_blocks = (rx_len + MWIFIEX_SDIO_BLOCK_SIZE - 1) / MWIFIEX_SDIO_BLOCK_SIZE; if (rx_len <= adapter->intf_hdr_len || (card->mpa_rx.enabled && ((rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) > card->mpa_rx.buf_size))) { mwifiex_dbg(adapter, ERROR, "invalid rx_len=%d\n", rx_len); return -1; } rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE); mwifiex_dbg(adapter, INFO, "info: rx_len = %d\n", rx_len); if (mwifiex_sdio_card_to_host_mp_aggr(adapter, rx_len, port)) { mwifiex_dbg(adapter, ERROR, "card_to_host_mpa failed: int status=%#x\n", sdio_ireg); goto term_cmd; } } } return 0; term_cmd: /* terminate cmd */ if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr)) mwifiex_dbg(adapter, ERROR, "read CFG reg failed\n"); else mwifiex_dbg(adapter, INFO, "info: CFG reg val = %d\n", cr); if (mwifiex_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04))) mwifiex_dbg(adapter, ERROR, "write CFG reg failed\n"); else mwifiex_dbg(adapter, INFO, "info: write success\n"); if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr)) mwifiex_dbg(adapter, ERROR, "read CFG reg failed\n"); else mwifiex_dbg(adapter, INFO, "info: CFG reg val =%x\n", cr); return -1; } /* * This function aggregates transmission buffers in driver and downloads * the aggregated packet to card. * * The individual packets are aggregated by copying into an aggregation * buffer and then downloaded to the card. Previous unsent packets in the * aggregation buffer are pre-copied first before new packets are added. * Aggregation is done till there is space left in the aggregation buffer, * or till new packets are available. * * The function will only download the packet to the card when aggregation * stops, otherwise it will just aggregate the packet in aggregation buffer * and return. */ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter, u8 *payload, u32 pkt_len, u32 port, u32 next_pkt_len) { struct sdio_mmc_card *card = adapter->card; int ret = 0; s32 f_send_aggr_buf = 0; s32 f_send_cur_buf = 0; s32 f_precopy_cur_buf = 0; s32 f_postcopy_cur_buf = 0; u32 mport; int index; if (!card->mpa_tx.enabled || (card->has_control_mask && (port == CTRL_PORT)) || (card->supports_sdio_new_mode && (port == CMD_PORT_SLCT))) { mwifiex_dbg(adapter, WARN, "info: %s: tx aggregation disabled\n", __func__); f_send_cur_buf = 1; goto tx_curr_single; } if (next_pkt_len) { /* More pkt in TX queue */ mwifiex_dbg(adapter, INFO, "info: %s: more packets in queue.\n", __func__); if (MP_TX_AGGR_IN_PROGRESS(card)) { if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) { f_precopy_cur_buf = 1; if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port)) || !MP_TX_AGGR_BUF_HAS_ROOM( card, pkt_len + next_pkt_len)) f_send_aggr_buf = 1; } else { /* No room in Aggr buf, send it */ f_send_aggr_buf = 1; if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) f_send_cur_buf = 1; else f_postcopy_cur_buf = 1; } } else { if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len) && (card->mp_wr_bitmap & (1 << card->curr_wr_port))) f_precopy_cur_buf = 1; else f_send_cur_buf = 1; } } else { /* Last pkt in TX queue */ mwifiex_dbg(adapter, INFO, "info: %s: Last packet in Tx Queue.\n", __func__); if (MP_TX_AGGR_IN_PROGRESS(card)) { /* some packs in Aggr buf already */ f_send_aggr_buf = 1; if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) f_precopy_cur_buf = 1; else /* No room in Aggr buf, send it */ f_send_cur_buf = 1; } else { f_send_cur_buf = 1; } } if (f_precopy_cur_buf) { mwifiex_dbg(adapter, DATA, "data: %s: precopy current buffer\n", __func__); MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) || mp_tx_aggr_port_limit_reached(card)) /* No more pkts allowed in Aggr buf, send it */ f_send_aggr_buf = 1; } if (f_send_aggr_buf) { mwifiex_dbg(adapter, DATA, "data: %s: send aggr buffer: %d %d\n", __func__, card->mpa_tx.start_port, card->mpa_tx.ports); if (card->supports_sdio_new_mode) { u32 port_count; int i; for (i = 0, port_count = 0; i < card->max_ports; i++) if (card->mpa_tx.ports & BIT(i)) port_count++; /* Writing data from "start_port + 0" to "start_port + * port_count -1", so decrease the count by 1 */ port_count--; mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | (port_count << 8)) + card->mpa_tx.start_port; } else { mport = (adapter->ioport | SDIO_MPA_ADDR_BASE | (card->mpa_tx.ports << 4)) + card->mpa_tx.start_port; } if (card->mpa_tx.pkt_cnt == 1) mport = adapter->ioport + card->mpa_tx.start_port; ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf, card->mpa_tx.buf_len, mport); /* Save the last multi port tx aggreagation info to debug log */ index = adapter->dbg.last_sdio_mp_index; index = (index + 1) % MWIFIEX_DBG_SDIO_MP_NUM; adapter->dbg.last_sdio_mp_index = index; adapter->dbg.last_mp_wr_ports[index] = mport; adapter->dbg.last_mp_wr_bitmap[index] = card->mp_wr_bitmap; adapter->dbg.last_mp_wr_len[index] = card->mpa_tx.buf_len; adapter->dbg.last_mp_curr_wr_port[index] = card->curr_wr_port; MP_TX_AGGR_BUF_RESET(card); } tx_curr_single: if (f_send_cur_buf) { mwifiex_dbg(adapter, DATA, "data: %s: send current buffer %d\n", __func__, port); ret = mwifiex_write_data_to_card(adapter, payload, pkt_len, adapter->ioport + port); } if (f_postcopy_cur_buf) { mwifiex_dbg(adapter, DATA, "data: %s: postcopy current buffer\n", __func__); MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); } return ret; } /* * This function downloads data from driver to card. * * Both commands and data packets are transferred to the card by this * function. * * This function adds the SDIO specific header to the front of the buffer * before transferring. The header contains the length of the packet and * the type. The firmware handles the packets based upon this set type. */ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter, u8 type, struct sk_buff *skb, struct mwifiex_tx_param *tx_param) { struct sdio_mmc_card *card = adapter->card; int ret; u32 buf_block_len; u32 blk_size; u32 port = CTRL_PORT; u8 *payload = (u8 *)skb->data; u32 pkt_len = skb->len; /* Allocate buffer and copy payload */ blk_size = MWIFIEX_SDIO_BLOCK_SIZE; buf_block_len = (pkt_len + blk_size - 1) / blk_size; put_unaligned_le16((u16)pkt_len, payload + 0); put_unaligned_le16((u32)type, payload + 2); /* * This is SDIO specific header * u16 length, * u16 type (MWIFIEX_TYPE_DATA = 0, MWIFIEX_TYPE_CMD = 1, * MWIFIEX_TYPE_EVENT = 3) */ if (type == MWIFIEX_TYPE_DATA) { ret = mwifiex_get_wr_port_data(adapter, &port); if (ret) { mwifiex_dbg(adapter, ERROR, "%s: no wr_port available\n", __func__); return ret; } } else { adapter->cmd_sent = true; /* Type must be MWIFIEX_TYPE_CMD */ if (pkt_len <= adapter->intf_hdr_len || pkt_len > MWIFIEX_UPLD_SIZE) mwifiex_dbg(adapter, ERROR, "%s: payload=%p, nb=%d\n", __func__, payload, pkt_len); if (card->supports_sdio_new_mode) port = CMD_PORT_SLCT; } /* Transfer data to card */ pkt_len = buf_block_len * blk_size; if (tx_param) ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len, port, tx_param->next_pkt_len ); else ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len, port, 0); if (ret) { if (type == MWIFIEX_TYPE_CMD) adapter->cmd_sent = false; if (type == MWIFIEX_TYPE_DATA) { adapter->data_sent = false; /* restore curr_wr_port in error cases */ card->curr_wr_port = port; card->mp_wr_bitmap |= (u32)(1 << card->curr_wr_port); } } else { if (type == MWIFIEX_TYPE_DATA) { if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) adapter->data_sent = true; else adapter->data_sent = false; } } return ret; } /* * This function allocates the MPA Tx and Rx buffers. */ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter, u32 mpa_tx_buf_size, u32 mpa_rx_buf_size) { struct sdio_mmc_card *card = adapter->card; u32 rx_buf_size; int ret = 0; card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL); if (!card->mpa_tx.buf) { ret = -1; goto error; } card->mpa_tx.buf_size = mpa_tx_buf_size; rx_buf_size = max_t(u32, mpa_rx_buf_size, (u32)SDIO_MAX_AGGR_BUF_SIZE); card->mpa_rx.buf = kzalloc(rx_buf_size, GFP_KERNEL); if (!card->mpa_rx.buf) { ret = -1; goto error; } card->mpa_rx.buf_size = rx_buf_size; error: if (ret) { kfree(card->mpa_tx.buf); kfree(card->mpa_rx.buf); card->mpa_tx.buf_size = 0; card->mpa_rx.buf_size = 0; } return ret; } /* * This function unregisters the SDIO device. * * The SDIO IRQ is released, the function is disabled and driver * data is set to null. */ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; if (adapter->card) { card->adapter = NULL; sdio_claim_host(card->func); sdio_disable_func(card->func); sdio_release_host(card->func); } } /* * This function registers the SDIO device. * * SDIO IRQ is claimed, block size is set and driver data is initialized. */ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) { int ret; struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; /* save adapter pointer in card */ card->adapter = adapter; adapter->tx_buf_size = card->tx_buf_size; sdio_claim_host(func); /* Set block size */ ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE); sdio_release_host(func); if (ret) { mwifiex_dbg(adapter, ERROR, "cannot set SDIO block size\n"); return ret; } strcpy(adapter->fw_name, card->firmware); if (card->fw_dump_enh) { adapter->mem_type_mapping_tbl = generic_mem_type_map; adapter->num_mem_types = 1; } else { adapter->mem_type_mapping_tbl = mem_type_mapping_tbl; adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl); } return 0; } /* * This function initializes the SDIO driver. * * The following initializations steps are followed - * - Read the Host interrupt status register to acknowledge * the first interrupt got from bootloader * - Disable host interrupt mask register * - Get SDIO port * - Initialize SDIO variables in card * - Allocate MP registers * - Allocate MPA Tx and Rx buffers */ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; int ret; u8 sdio_ireg; sdio_set_drvdata(card->func, card); /* * Read the host_int_status_reg for ACK the first interrupt got * from the bootloader. If we don't do this we get a interrupt * as soon as we register the irq. */ mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); /* Get SDIO ioport */ mwifiex_init_sdio_ioport(adapter); /* Initialize SDIO variables in card */ card->mp_rd_bitmap = 0; card->mp_wr_bitmap = 0; card->curr_rd_port = reg->start_rd_port; card->curr_wr_port = reg->start_wr_port; card->mp_data_port_mask = reg->data_port_mask; card->mpa_tx.buf_len = 0; card->mpa_tx.pkt_cnt = 0; card->mpa_tx.start_port = 0; card->mpa_tx.enabled = 1; card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit; card->mpa_rx.buf_len = 0; card->mpa_rx.pkt_cnt = 0; card->mpa_rx.start_port = 0; card->mpa_rx.enabled = 1; card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit; /* Allocate buffers for SDIO MP-A */ card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL); if (!card->mp_regs) return -ENOMEM; /* Allocate skb pointer buffers */ card->mpa_rx.skb_arr = kcalloc(card->mp_agg_pkt_limit, sizeof(void *), GFP_KERNEL); if (!card->mpa_rx.skb_arr) { kfree(card->mp_regs); return -ENOMEM; } card->mpa_rx.len_arr = kcalloc(card->mp_agg_pkt_limit, sizeof(*card->mpa_rx.len_arr), GFP_KERNEL); if (!card->mpa_rx.len_arr) { kfree(card->mp_regs); kfree(card->mpa_rx.skb_arr); return -ENOMEM; } ret = mwifiex_alloc_sdio_mpa_buffers(adapter, card->mp_tx_agg_buf_size, card->mp_rx_agg_buf_size); /* Allocate 32k MPA Tx/Rx buffers if 64k memory allocation fails */ if (ret && (card->mp_tx_agg_buf_size == MWIFIEX_MP_AGGR_BUF_SIZE_MAX || card->mp_rx_agg_buf_size == MWIFIEX_MP_AGGR_BUF_SIZE_MAX)) { /* Disable rx single port aggregation */ adapter->host_disable_sdio_rx_aggr = true; ret = mwifiex_alloc_sdio_mpa_buffers (adapter, MWIFIEX_MP_AGGR_BUF_SIZE_32K, MWIFIEX_MP_AGGR_BUF_SIZE_32K); if (ret) { /* Disable multi port aggregation */ card->mpa_tx.enabled = 0; card->mpa_rx.enabled = 0; } } adapter->auto_tdls = card->can_auto_tdls; adapter->ext_scan = card->can_ext_scan; return 0; } /* * This function resets the MPA Tx and Rx buffers. */ static void mwifiex_cleanup_mpa_buf(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; MP_TX_AGGR_BUF_RESET(card); MP_RX_AGGR_BUF_RESET(card); } /* * This function cleans up the allocated card buffers. * * The following are freed by this function - * - MP registers * - MPA Tx buffer * - MPA Rx buffer */ static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; cancel_work_sync(&card->work); kfree(card->mp_regs); kfree(card->mpa_rx.skb_arr); kfree(card->mpa_rx.len_arr); kfree(card->mpa_tx.buf); kfree(card->mpa_rx.buf); } /* * This function updates the MP end port in card. */ static void mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port) { struct sdio_mmc_card *card = adapter->card; const struct mwifiex_sdio_card_reg *reg = card->reg; int i; card->mp_end_port = port; card->mp_data_port_mask = reg->data_port_mask; if (reg->start_wr_port) { for (i = 1; i <= card->max_ports - card->mp_end_port; i++) card->mp_data_port_mask &= ~(1 << (card->max_ports - i)); } card->curr_wr_port = reg->start_wr_port; mwifiex_dbg(adapter, CMD, "cmd: mp_end_port %d, data port mask 0x%x\n", port, card->mp_data_port_mask); } static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; int ret; mwifiex_shutdown_sw(adapter); /* power cycle the adapter */ sdio_claim_host(func); mmc_hw_reset(func->card->host); sdio_release_host(func); /* Previous save_adapter won't be valid after this. We will cancel * pending work requests. */ clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags); clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags); ret = mwifiex_reinit_sw(adapter); if (ret) dev_err(&func->dev, "reinit failed: %d\n", ret); } /* This function read/write firmware */ static enum rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter, u8 doneflag) { struct sdio_mmc_card *card = adapter->card; int ret, tries; u8 ctrl_data = 0; sdio_writeb(card->func, card->reg->fw_dump_host_ready, card->reg->fw_dump_ctrl, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO Write ERR\n"); return RDWR_STATUS_FAILURE; } for (tries = 0; tries < MAX_POLL_TRIES; tries++) { ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read err\n"); return RDWR_STATUS_FAILURE; } if (ctrl_data == FW_DUMP_DONE) break; if (doneflag && ctrl_data == doneflag) return RDWR_STATUS_DONE; if (ctrl_data != card->reg->fw_dump_host_ready) { mwifiex_dbg(adapter, WARN, "The ctrl reg was changed, re-try again\n"); sdio_writeb(card->func, card->reg->fw_dump_host_ready, card->reg->fw_dump_ctrl, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO write err\n"); return RDWR_STATUS_FAILURE; } } usleep_range(100, 200); } if (ctrl_data == card->reg->fw_dump_host_ready) { mwifiex_dbg(adapter, ERROR, "Fail to pull ctrl_data\n"); return RDWR_STATUS_FAILURE; } return RDWR_STATUS_SUCCESS; } /* This function dump firmware memory to file */ static void mwifiex_sdio_fw_dump(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; int ret = 0; unsigned int reg, reg_start, reg_end; u8 *dbg_ptr, *end_ptr, dump_num, idx, i, read_reg, doneflag = 0; enum rdwr_status stat; u32 memory_size; if (!card->can_dump_fw) return; for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) { struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; if (entry->mem_ptr) { vfree(entry->mem_ptr); entry->mem_ptr = NULL; } entry->mem_size = 0; } mwifiex_pm_wakeup_card(adapter); sdio_claim_host(card->func); mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n"); stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag); if (stat == RDWR_STATUS_FAILURE) goto done; reg = card->reg->fw_dump_start; /* Read the number of the memories which will dump */ dump_num = sdio_readb(card->func, reg, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read memory length err\n"); goto done; } /* Read the length of every memory which will dump */ for (idx = 0; idx < dump_num; idx++) { struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx]; stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag); if (stat == RDWR_STATUS_FAILURE) goto done; memory_size = 0; reg = card->reg->fw_dump_start; for (i = 0; i < 4; i++) { read_reg = sdio_readb(card->func, reg, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read err\n"); goto done; } memory_size |= (read_reg << i*8); reg++; } if (memory_size == 0) { mwifiex_dbg(adapter, DUMP, "Firmware dump Finished!\n"); ret = mwifiex_write_reg(adapter, card->reg->fw_dump_ctrl, FW_DUMP_READ_DONE); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO write err\n"); return; } break; } mwifiex_dbg(adapter, DUMP, "%s_SIZE=0x%x\n", entry->mem_name, memory_size); entry->mem_ptr = vmalloc(memory_size + 1); entry->mem_size = memory_size; if (!entry->mem_ptr) { mwifiex_dbg(adapter, ERROR, "Vmalloc %s failed\n", entry->mem_name); goto done; } dbg_ptr = entry->mem_ptr; end_ptr = dbg_ptr + memory_size; doneflag = entry->done_flag; mwifiex_dbg(adapter, DUMP, "Start %s output, please wait...\n", entry->mem_name); do { stat = mwifiex_sdio_rdwr_firmware(adapter, doneflag); if (stat == RDWR_STATUS_FAILURE) goto done; reg_start = card->reg->fw_dump_start; reg_end = card->reg->fw_dump_end; for (reg = reg_start; reg <= reg_end; reg++) { *dbg_ptr = sdio_readb(card->func, reg, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read err\n"); goto done; } if (dbg_ptr < end_ptr) dbg_ptr++; else mwifiex_dbg(adapter, ERROR, "Allocated buf not enough\n"); } if (stat != RDWR_STATUS_DONE) continue; mwifiex_dbg(adapter, DUMP, "%s done: size=0x%tx\n", entry->mem_name, dbg_ptr - entry->mem_ptr); break; } while (1); } mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n"); done: sdio_release_host(card->func); } static void mwifiex_sdio_generic_fw_dump(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; struct memory_type_mapping *entry = &generic_mem_type_map[0]; unsigned int reg, reg_start, reg_end; u8 start_flag = 0, done_flag = 0; u8 *dbg_ptr, *end_ptr; enum rdwr_status stat; int ret = -1, tries; if (!card->fw_dump_enh) return; if (entry->mem_ptr) { vfree(entry->mem_ptr); entry->mem_ptr = NULL; } entry->mem_size = 0; mwifiex_pm_wakeup_card(adapter); sdio_claim_host(card->func); mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n"); stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag); if (stat == RDWR_STATUS_FAILURE) goto done; reg_start = card->reg->fw_dump_start; reg_end = card->reg->fw_dump_end; for (reg = reg_start; reg <= reg_end; reg++) { for (tries = 0; tries < MAX_POLL_TRIES; tries++) { start_flag = sdio_readb(card->func, reg, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read err\n"); goto done; } if (start_flag == 0) break; if (tries == MAX_POLL_TRIES) { mwifiex_dbg(adapter, ERROR, "FW not ready to dump\n"); ret = -1; goto done; } } usleep_range(100, 200); } entry->mem_ptr = vmalloc(0xf0000 + 1); if (!entry->mem_ptr) { ret = -1; goto done; } dbg_ptr = entry->mem_ptr; entry->mem_size = 0xf0000; end_ptr = dbg_ptr + entry->mem_size; done_flag = entry->done_flag; mwifiex_dbg(adapter, DUMP, "Start %s output, please wait...\n", entry->mem_name); while (true) { stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag); if (stat == RDWR_STATUS_FAILURE) goto done; for (reg = reg_start; reg <= reg_end; reg++) { *dbg_ptr = sdio_readb(card->func, reg, &ret); if (ret) { mwifiex_dbg(adapter, ERROR, "SDIO read err\n"); goto done; } dbg_ptr++; if (dbg_ptr >= end_ptr) { u8 *tmp_ptr; tmp_ptr = vmalloc(entry->mem_size + 0x4000 + 1); if (!tmp_ptr) goto done; memcpy(tmp_ptr, entry->mem_ptr, entry->mem_size); vfree(entry->mem_ptr); entry->mem_ptr = tmp_ptr; tmp_ptr = NULL; dbg_ptr = entry->mem_ptr + entry->mem_size; entry->mem_size += 0x4000; end_ptr = entry->mem_ptr + entry->mem_size; } } if (stat == RDWR_STATUS_DONE) { entry->mem_size = dbg_ptr - entry->mem_ptr; mwifiex_dbg(adapter, DUMP, "dump %s done size=0x%x\n", entry->mem_name, entry->mem_size); ret = 0; break; } } mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n"); done: if (ret) { mwifiex_dbg(adapter, ERROR, "firmware dump failed\n"); if (entry->mem_ptr) { vfree(entry->mem_ptr); entry->mem_ptr = NULL; } entry->mem_size = 0; } sdio_release_host(card->func); } static void mwifiex_sdio_device_dump_work(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; adapter->devdump_data = vzalloc(MWIFIEX_FW_DUMP_SIZE); if (!adapter->devdump_data) { mwifiex_dbg(adapter, ERROR, "vzalloc devdump data failure!\n"); return; } mwifiex_drv_info_dump(adapter); if (card->fw_dump_enh) mwifiex_sdio_generic_fw_dump(adapter); else mwifiex_sdio_fw_dump(adapter); mwifiex_prepare_fw_dump_info(adapter); mwifiex_upload_device_dump(adapter); } static void mwifiex_sdio_work(struct work_struct *work) { struct sdio_mmc_card *card = container_of(work, struct sdio_mmc_card, work); if (test_and_clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags)) mwifiex_sdio_device_dump_work(card->adapter); if (test_and_clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags)) mwifiex_sdio_card_reset_work(card->adapter); } /* This function resets the card */ static void mwifiex_sdio_card_reset(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; if (!test_and_set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags)) schedule_work(&card->work); } /* This function dumps FW information */ static void mwifiex_sdio_device_dump(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags)) schedule_work(&card->work); } /* Function to dump SDIO function registers and SDIO scratch registers in case * of FW crash */ static int mwifiex_sdio_reg_dump(struct mwifiex_adapter *adapter, char *drv_buf) { char *p = drv_buf; struct sdio_mmc_card *cardp = adapter->card; int ret = 0; u8 count, func, data, index = 0, size = 0; u8 reg, reg_start, reg_end; char buf[256], *ptr; if (!p) return 0; mwifiex_dbg(adapter, MSG, "SDIO register dump start\n"); mwifiex_pm_wakeup_card(adapter); sdio_claim_host(cardp->func); for (count = 0; count < 5; count++) { memset(buf, 0, sizeof(buf)); ptr = buf; switch (count) { case 0: /* Read the registers of SDIO function0 */ func = count; reg_start = 0; reg_end = 9; break; case 1: /* Read the registers of SDIO function1 */ func = count; reg_start = cardp->reg->func1_dump_reg_start; reg_end = cardp->reg->func1_dump_reg_end; break; case 2: index = 0; func = 1; reg_start = cardp->reg->func1_spec_reg_table[index++]; size = cardp->reg->func1_spec_reg_num; reg_end = cardp->reg->func1_spec_reg_table[size-1]; break; default: /* Read the scratch registers of SDIO function1 */ if (count == 4) mdelay(100); func = 1; reg_start = cardp->reg->func1_scratch_reg; reg_end = reg_start + MWIFIEX_SDIO_SCRATCH_SIZE; } if (count != 2) ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ", func, reg_start, reg_end); else ptr += sprintf(ptr, "SDIO Func%d: ", func); for (reg = reg_start; reg <= reg_end;) { if (func == 0) data = sdio_f0_readb(cardp->func, reg, &ret); else data = sdio_readb(cardp->func, reg, &ret); if (count == 2) ptr += sprintf(ptr, "(%#x) ", reg); if (!ret) { ptr += sprintf(ptr, "%02x ", data); } else { ptr += sprintf(ptr, "ERR"); break; } if (count == 2 && reg < reg_end) reg = cardp->reg->func1_spec_reg_table[index++]; else reg++; } mwifiex_dbg(adapter, MSG, "%s\n", buf); p += sprintf(p, "%s\n", buf); } sdio_release_host(cardp->func); mwifiex_dbg(adapter, MSG, "SDIO register dump end\n"); return p - drv_buf; } /* sdio device/function initialization, code is extracted * from init_if handler and register_dev handler. */ static void mwifiex_sdio_up_dev(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; u8 sdio_ireg; sdio_claim_host(card->func); sdio_enable_func(card->func); sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE); sdio_release_host(card->func); /* tx_buf_size might be changed to 3584 by firmware during * data transfer, we will reset to default size. */ adapter->tx_buf_size = card->tx_buf_size; /* Read the host_int_status_reg for ACK the first interrupt got * from the bootloader. If we don't do this we get a interrupt * as soon as we register the irq. */ mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); mwifiex_init_sdio_ioport(adapter); } static struct mwifiex_if_ops sdio_ops = { .init_if = mwifiex_init_sdio, .cleanup_if = mwifiex_cleanup_sdio, .check_fw_status = mwifiex_check_fw_status, .check_winner_status = mwifiex_check_winner_status, .prog_fw = mwifiex_prog_fw_w_helper, .register_dev = mwifiex_register_dev, .unregister_dev = mwifiex_unregister_dev, .enable_int = mwifiex_sdio_enable_host_int, .disable_int = mwifiex_sdio_disable_host_int, .process_int_status = mwifiex_process_int_status, .host_to_card = mwifiex_sdio_host_to_card, .wakeup = mwifiex_pm_wakeup_card, .wakeup_complete = mwifiex_pm_wakeup_card_complete, /* SDIO specific */ .update_mp_end_port = mwifiex_update_mp_end_port, .cleanup_mpa_buf = mwifiex_cleanup_mpa_buf, .cmdrsp_complete = mwifiex_sdio_cmdrsp_complete, .event_complete = mwifiex_sdio_event_complete, .dnld_fw = mwifiex_sdio_dnld_fw, .card_reset = mwifiex_sdio_card_reset, .reg_dump = mwifiex_sdio_reg_dump, .device_dump = mwifiex_sdio_device_dump, .deaggr_pkt = mwifiex_deaggr_sdio_pkt, .up_dev = mwifiex_sdio_up_dev, }; module_driver(mwifiex_sdio, sdio_register_driver, sdio_unregister_driver); MODULE_AUTHOR("Marvell International Ltd."); MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION); MODULE_VERSION(SDIO_VERSION); MODULE_LICENSE("GPL v2"); MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1