Contributors: 4
Author Tokens Token Proportion Commits Commit Proportion
Stanislaw Gruszka 864 64.24% 6 20.69%
Lorenzo Bianconi 452 33.61% 19 65.52%
Felix Fietkau 27 2.01% 3 10.34%
Thomas Gleixner 2 0.15% 1 3.45%
Total 1345 29 


// SPDX-License-Identifier: GPL-2.0-only
/*
 * (c) Copyright 2002-2010, Ralink Technology, Inc.
 * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
 * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
 */

#include "mt76x0.h"
#include "eeprom.h"
#include "mcu.h"
#include "initvals.h"
#include "../mt76x02_phy.h"

static void mt76x0_vht_cap_mask(struct ieee80211_supported_band *sband)
{
	struct ieee80211_sta_vht_cap *vht_cap = &sband->vht_cap;
	u16 mcs_map = 0;
	int i;

	vht_cap->cap &= ~IEEE80211_VHT_CAP_RXLDPC;
	for (i = 0; i < 8; i++) {
		if (!i)
			mcs_map |= (IEEE80211_VHT_MCS_SUPPORT_0_7 << (i * 2));
		else
			mcs_map |=
				(IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2));
	}
	vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
	vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
}

static void
mt76x0_set_wlan_state(struct mt76x02_dev *dev, u32 val, bool enable)
{
	u32 mask = MT_CMB_CTRL_XTAL_RDY | MT_CMB_CTRL_PLL_LD;

	/* Note: we don't turn off WLAN_CLK because that makes the device
	 *	 not respond properly on the probe path.
	 *	 In case anyone (PSM?) wants to use this function we can
	 *	 bring the clock stuff back and fixup the probe path.
	 */

	if (enable)
		val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
			MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
	else
		val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN);

	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
	udelay(20);

	/* Note: vendor driver tries to disable/enable wlan here and retry
	 *       but the code which does it is so buggy it must have never
	 *       triggered, so don't bother.
	 */
	if (enable && !mt76_poll(dev, MT_CMB_CTRL, mask, mask, 2000))
		dev_err(dev->mt76.dev, "PLL and XTAL check failed\n");
}

void mt76x0_chip_onoff(struct mt76x02_dev *dev, bool enable, bool reset)
{
	u32 val;

	val = mt76_rr(dev, MT_WLAN_FUN_CTRL);

	if (reset) {
		val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN;
		val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;

		if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
			val |= (MT_WLAN_FUN_CTRL_WLAN_RESET |
				MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
			mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
			udelay(20);

			val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET |
				 MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
		}
	}

	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
	udelay(20);

	mt76x0_set_wlan_state(dev, val, enable);
}
EXPORT_SYMBOL_GPL(mt76x0_chip_onoff);

static void mt76x0_reset_csr_bbp(struct mt76x02_dev *dev)
{
	mt76_wr(dev, MT_MAC_SYS_CTRL,
		MT_MAC_SYS_CTRL_RESET_CSR |
		MT_MAC_SYS_CTRL_RESET_BBP);
	msleep(200);
	mt76_clear(dev, MT_MAC_SYS_CTRL,
		   MT_MAC_SYS_CTRL_RESET_CSR |
		   MT_MAC_SYS_CTRL_RESET_BBP);
}

#define RANDOM_WRITE(dev, tab)			\
	mt76_wr_rp(dev, MT_MCU_MEMMAP_WLAN,	\
		   tab, ARRAY_SIZE(tab))

static int mt76x0_init_bbp(struct mt76x02_dev *dev)
{
	int ret, i;

	ret = mt76x0_phy_wait_bbp_ready(dev);
	if (ret)
		return ret;

	RANDOM_WRITE(dev, mt76x0_bbp_init_tab);

	for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
		const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
		const struct mt76_reg_pair *pair = &item->reg_pair;

		if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
			mt76_wr(dev, pair->reg, pair->value);
	}

	RANDOM_WRITE(dev, mt76x0_dcoc_tab);

	return 0;
}

static void mt76x0_init_mac_registers(struct mt76x02_dev *dev)
{
	RANDOM_WRITE(dev, common_mac_reg_table);

	/* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */
	RANDOM_WRITE(dev, mt76x0_mac_reg_table);

	/* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */
	mt76_clear(dev, MT_MAC_SYS_CTRL, 0x3);

	/* Set 0x141C[15:12]=0xF */
	mt76_set(dev, MT_EXT_CCA_CFG, 0xf000);

	mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);

	/*
	 * tx_ring 9 is for mgmt frame
	 * tx_ring 8 is for in-band command frame.
	 * WMM_RG0_TXQMA: this register setting is for FCE to
	 *		  define the rule of tx_ring 9
	 * WMM_RG1_TXQMA: this register setting is for FCE to
	 *		  define the rule of tx_ring 8
	 */
	mt76_rmw(dev, MT_WMM_CTRL, 0x3ff, 0x201);
}

static void mt76x0_reset_counters(struct mt76x02_dev *dev)
{
	mt76_rr(dev, MT_RX_STAT_0);
	mt76_rr(dev, MT_RX_STAT_1);
	mt76_rr(dev, MT_RX_STAT_2);
	mt76_rr(dev, MT_TX_STA_0);
	mt76_rr(dev, MT_TX_STA_1);
	mt76_rr(dev, MT_TX_STA_2);
}

int mt76x0_mac_start(struct mt76x02_dev *dev)
{
	mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX);

	if (!mt76x02_wait_for_wpdma(&dev->mt76, 200000))
		return -ETIMEDOUT;

	mt76_wr(dev, MT_RX_FILTR_CFG, dev->mt76.rxfilter);
	mt76_wr(dev, MT_MAC_SYS_CTRL,
		MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);

	return !mt76x02_wait_for_wpdma(&dev->mt76, 50) ? -ETIMEDOUT : 0;
}
EXPORT_SYMBOL_GPL(mt76x0_mac_start);

void mt76x0_mac_stop(struct mt76x02_dev *dev)
{
	int i = 200, ok = 0;

	mt76_clear(dev, MT_TXOP_CTRL_CFG, MT_TXOP_ED_CCA_EN);

	/* Page count on TxQ */
	while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
		       (mt76_rr(dev, 0x0a30) & 0x000000ff) ||
		       (mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
		msleep(10);

	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000))
		dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n");

	mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX |
					 MT_MAC_SYS_CTRL_ENABLE_TX);

	/* Page count on RxQ */
	for (i = 0; i < 200; i++) {
		if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
		    !mt76_rr(dev, 0x0a30) &&
		    !mt76_rr(dev, 0x0a34)) {
			if (ok++ > 5)
				break;
			continue;
		}
		msleep(1);
	}

	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
		dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
}
EXPORT_SYMBOL_GPL(mt76x0_mac_stop);

int mt76x0_init_hardware(struct mt76x02_dev *dev)
{
	int ret, i, k;

	if (!mt76x02_wait_for_wpdma(&dev->mt76, 1000))
		return -EIO;

	/* Wait for ASIC ready after FW load. */
	if (!mt76x02_wait_for_mac(&dev->mt76))
		return -ETIMEDOUT;

	mt76x0_reset_csr_bbp(dev);
	ret = mt76x02_mcu_function_select(dev, Q_SELECT, 1);
	if (ret)
		return ret;

	mt76x0_init_mac_registers(dev);

	if (!mt76x02_wait_for_txrx_idle(&dev->mt76))
		return -EIO;

	ret = mt76x0_init_bbp(dev);
	if (ret)
		return ret;

	dev->mt76.rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG);

	for (i = 0; i < 16; i++)
		for (k = 0; k < 4; k++)
			mt76x02_mac_shared_key_setup(dev, i, k, NULL);

	for (i = 0; i < 256; i++)
		mt76x02_mac_wcid_setup(dev, i, 0, NULL);

	mt76x0_reset_counters(dev);

	ret = mt76x0_eeprom_init(dev);
	if (ret)
		return ret;

	mt76x0_phy_init(dev);

	return 0;
}
EXPORT_SYMBOL_GPL(mt76x0_init_hardware);

static void
mt76x0_init_txpower(struct mt76x02_dev *dev,
		    struct ieee80211_supported_band *sband)
{
	struct ieee80211_channel *chan;
	struct mt76_rate_power t;
	s8 tp;
	int i;

	for (i = 0; i < sband->n_channels; i++) {
		chan = &sband->channels[i];

		mt76x0_get_tx_power_per_rate(dev, chan, &t);
		mt76x0_get_power_info(dev, chan, &tp);

		chan->orig_mpwr = (mt76x02_get_max_rate_power(&t) + tp) / 2;
		chan->max_power = min_t(int, chan->max_reg_power,
					chan->orig_mpwr);
	}
}

int mt76x0_register_device(struct mt76x02_dev *dev)
{
	int ret;

	mt76x02_init_device(dev);
	mt76x02_config_mac_addr_list(dev);

	ret = mt76_register_device(&dev->mt76, true, mt76x02_rates,
				   ARRAY_SIZE(mt76x02_rates));
	if (ret)
		return ret;

	if (dev->mt76.cap.has_5ghz) {
		/* overwrite unsupported features */
		mt76x0_vht_cap_mask(&dev->mt76.sband_5g.sband);
		mt76x0_init_txpower(dev, &dev->mt76.sband_5g.sband);
	}

	if (dev->mt76.cap.has_2ghz)
		mt76x0_init_txpower(dev, &dev->mt76.sband_2g.sband);

	mt76x02_init_debugfs(dev);

	return 0;
}
EXPORT_SYMBOL_GPL(mt76x0_register_device);