| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Bartlomiej Zolnierkiewicz | 3321 | 51.82% | 3 | 3.12% |
| Gabor Juhos | 673 | 10.50% | 18 | 18.75% |
| Woody Hung | 521 | 8.13% | 1 | 1.04% |
| Roman Yeryomin | 451 | 7.04% | 1 | 1.04% |
| Gertjan van Wingerde | 378 | 5.90% | 13 | 13.54% |
| Stanislaw W. Gruszka | 279 | 4.35% | 7 | 7.29% |
| Helmut Schaa | 275 | 4.29% | 14 | 14.58% |
| RA-Shiang Tu | 137 | 2.14% | 3 | 3.12% |
| RA-Jay Hung | 103 | 1.61% | 6 | 6.25% |
| Ivo van Doorn | 67 | 1.05% | 5 | 5.21% |
| Daniel Golle | 53 | 0.83% | 3 | 3.12% |
| Stanislaw Gruszka | 42 | 0.66% | 6 | 6.25% |
| John Li | 38 | 0.59% | 2 | 2.08% |
| Jakub Kiciński | 13 | 0.20% | 1 | 1.04% |
| Serge Vasilugin | 12 | 0.19% | 2 | 2.08% |
| Mark Einon | 8 | 0.12% | 1 | 1.04% |
| Colin Ian King | 8 | 0.12% | 1 | 1.04% |
| Zero.Lin | 7 | 0.11% | 1 | 1.04% |
| Anisse Astier | 6 | 0.09% | 2 | 2.08% |
| Canek Peláez Valdés | 5 | 0.08% | 1 | 1.04% |
| Xose Vazquez Perez | 4 | 0.06% | 1 | 1.04% |
| Eric Dumazet | 3 | 0.05% | 1 | 1.04% |
| Villacis at palosanto | 2 | 0.03% | 1 | 1.04% |
| Thomas Gleixner | 2 | 0.03% | 1 | 1.04% |
| Lucas De Marchi | 1 | 0.02% | 1 | 1.04% |
| Total | 6409 | 96 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> <http://rt2x00.serialmonkey.com> */ /* Module: rt2800 Abstract: Data structures and registers for the rt2800 modules. Supported chipsets: RT2800E, RT2800ED & RT2800U. */ #ifndef RT2800_H #define RT2800_H /* * RF chip defines. * * RF2820 2.4G 2T3R * RF2850 2.4G/5G 2T3R * RF2720 2.4G 1T2R * RF2750 2.4G/5G 1T2R * RF3020 2.4G 1T1R * RF2020 2.4G B/G * RF3021 2.4G 1T2R * RF3022 2.4G 2T2R * RF3052 2.4G/5G 2T2R * RF2853 2.4G/5G 3T3R * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593) * RF3853 2.4G/5G 3T3R(RT3883/RT3662) * RF5592 2.4G/5G 2T2R * RF3070 2.4G 1T1R * RF5360 2.4G 1T1R * RF5362 2.4G 1T1R * RF5370 2.4G 1T1R * RF5390 2.4G 1T1R */ #define RF2820 0x0001 #define RF2850 0x0002 #define RF2720 0x0003 #define RF2750 0x0004 #define RF3020 0x0005 #define RF2020 0x0006 #define RF3021 0x0007 #define RF3022 0x0008 #define RF3052 0x0009 #define RF2853 0x000a #define RF3320 0x000b #define RF3322 0x000c #define RF3053 0x000d #define RF5592 0x000f #define RF3070 0x3070 #define RF3290 0x3290 #define RF3853 0x3853 #define RF5350 0x5350 #define RF5360 0x5360 #define RF5362 0x5362 #define RF5370 0x5370 #define RF5372 0x5372 #define RF5390 0x5390 #define RF5392 0x5392 #define RF7620 0x7620 /* * Chipset revisions. */ #define REV_RT2860C 0x0100 #define REV_RT2860D 0x0101 #define REV_RT2872E 0x0200 #define REV_RT3070E 0x0200 #define REV_RT3070F 0x0201 #define REV_RT3071E 0x0211 #define REV_RT3090E 0x0211 #define REV_RT3390E 0x0211 #define REV_RT3593E 0x0211 #define REV_RT5390F 0x0502 #define REV_RT5370G 0x0503 #define REV_RT5390R 0x1502 #define REV_RT5592C 0x0221 #define DEFAULT_RSSI_OFFSET 120 /* * Register layout information. */ #define CSR_REG_BASE 0x1000 #define CSR_REG_SIZE 0x0800 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0200 #define BBP_BASE 0x0000 #define BBP_SIZE 0x00ff #define RF_BASE 0x0004 #define RF_SIZE 0x0010 #define RFCSR_BASE 0x0000 #define RFCSR_SIZE 0x0040 /* * Number of TX queues. */ #define NUM_TX_QUEUES 4 /* * Registers. */ /* * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number. */ #define MAC_CSR0_3290 0x0000 /* * E2PROM_CSR: PCI EEPROM control register. * RELOAD: Write 1 to reload eeprom content. * TYPE: 0: 93c46, 1:93c66. * LOAD_STATUS: 1:loading, 0:done. */ #define E2PROM_CSR 0x0004 #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) #define E2PROM_CSR_DATA_IN FIELD32(0x00000004) #define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) #define E2PROM_CSR_TYPE FIELD32(0x00000030) #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) #define E2PROM_CSR_RELOAD FIELD32(0x00000080) /* * CMB_CTRL_CFG */ #define CMB_CTRL 0x0020 #define AUX_OPT_BIT0 FIELD32(0x00000001) #define AUX_OPT_BIT1 FIELD32(0x00000002) #define AUX_OPT_BIT2 FIELD32(0x00000004) #define AUX_OPT_BIT3 FIELD32(0x00000008) #define AUX_OPT_BIT4 FIELD32(0x00000010) #define AUX_OPT_BIT5 FIELD32(0x00000020) #define AUX_OPT_BIT6 FIELD32(0x00000040) #define AUX_OPT_BIT7 FIELD32(0x00000080) #define AUX_OPT_BIT8 FIELD32(0x00000100) #define AUX_OPT_BIT9 FIELD32(0x00000200) #define AUX_OPT_BIT10 FIELD32(0x00000400) #define AUX_OPT_BIT11 FIELD32(0x00000800) #define AUX_OPT_BIT12 FIELD32(0x00001000) #define AUX_OPT_BIT13 FIELD32(0x00002000) #define AUX_OPT_BIT14 FIELD32(0x00004000) #define AUX_OPT_BIT15 FIELD32(0x00008000) #define LDO25_LEVEL FIELD32(0x00030000) #define LDO25_LARGEA FIELD32(0x00040000) #define LDO25_FRC_ON FIELD32(0x00080000) #define CMB_RSV FIELD32(0x00300000) #define XTAL_RDY FIELD32(0x00400000) #define PLL_LD FIELD32(0x00800000) #define LDO_CORE_LEVEL FIELD32(0x0F000000) #define LDO_BGSEL FIELD32(0x30000000) #define LDO3_EN FIELD32(0x40000000) #define LDO0_EN FIELD32(0x80000000) /* * EFUSE_CSR_3290: RT3290 EEPROM */ #define EFUSE_CTRL_3290 0x0024 /* * EFUSE_DATA3 of 3290 */ #define EFUSE_DATA3_3290 0x0028 /* * EFUSE_DATA2 of 3290 */ #define EFUSE_DATA2_3290 0x002c /* * EFUSE_DATA1 of 3290 */ #define EFUSE_DATA1_3290 0x0030 /* * EFUSE_DATA0 of 3290 */ #define EFUSE_DATA0_3290 0x0034 /* * OSC_CTRL_CFG * Ring oscillator configuration */ #define OSC_CTRL 0x0038 #define OSC_REF_CYCLE FIELD32(0x00001fff) #define OSC_RSV FIELD32(0x0000e000) #define OSC_CAL_CNT FIELD32(0x0fff0000) #define OSC_CAL_ACK FIELD32(0x10000000) #define OSC_CLK_32K_VLD FIELD32(0x20000000) #define OSC_CAL_REQ FIELD32(0x40000000) #define OSC_ROSC_EN FIELD32(0x80000000) /* * COEX_CFG_0 */ #define COEX_CFG0 0x0040 #define COEX_CFG_ANT FIELD32(0xff000000) /* * COEX_CFG_1 */ #define COEX_CFG1 0x0044 /* * COEX_CFG_2 */ #define COEX_CFG2 0x0048 #define BT_COEX_CFG1 FIELD32(0xff000000) #define BT_COEX_CFG0 FIELD32(0x00ff0000) #define WL_COEX_CFG1 FIELD32(0x0000ff00) #define WL_COEX_CFG0 FIELD32(0x000000ff) /* * PLL_CTRL_CFG * PLL configuration register */ #define PLL_CTRL 0x0050 #define PLL_RESERVED_INPUT1 FIELD32(0x000000ff) #define PLL_RESERVED_INPUT2 FIELD32(0x0000ff00) #define PLL_CONTROL FIELD32(0x00070000) #define PLL_LPF_R1 FIELD32(0x00080000) #define PLL_LPF_C1_CTRL FIELD32(0x00300000) #define PLL_LPF_C2_CTRL FIELD32(0x00c00000) #define PLL_CP_CURRENT_CTRL FIELD32(0x03000000) #define PLL_PFD_DELAY_CTRL FIELD32(0x0c000000) #define PLL_LOCK_CTRL FIELD32(0x70000000) #define PLL_VBGBK_EN FIELD32(0x80000000) /* * WLAN_CTRL_CFG * RT3290 wlan configuration */ #define WLAN_FUN_CTRL 0x0080 #define WLAN_EN FIELD32(0x00000001) #define WLAN_CLK_EN FIELD32(0x00000002) #define WLAN_RSV1 FIELD32(0x00000004) #define WLAN_RESET FIELD32(0x00000008) #define PCIE_APP0_CLK_REQ FIELD32(0x00000010) #define FRC_WL_ANT_SET FIELD32(0x00000020) #define INV_TR_SW0 FIELD32(0x00000040) #define WLAN_GPIO_IN_BIT0 FIELD32(0x00000100) #define WLAN_GPIO_IN_BIT1 FIELD32(0x00000200) #define WLAN_GPIO_IN_BIT2 FIELD32(0x00000400) #define WLAN_GPIO_IN_BIT3 FIELD32(0x00000800) #define WLAN_GPIO_IN_BIT4 FIELD32(0x00001000) #define WLAN_GPIO_IN_BIT5 FIELD32(0x00002000) #define WLAN_GPIO_IN_BIT6 FIELD32(0x00004000) #define WLAN_GPIO_IN_BIT7 FIELD32(0x00008000) #define WLAN_GPIO_IN_BIT_ALL FIELD32(0x0000ff00) #define WLAN_GPIO_OUT_BIT0 FIELD32(0x00010000) #define WLAN_GPIO_OUT_BIT1 FIELD32(0x00020000) #define WLAN_GPIO_OUT_BIT2 FIELD32(0x00040000) #define WLAN_GPIO_OUT_BIT3 FIELD32(0x00050000) #define WLAN_GPIO_OUT_BIT4 FIELD32(0x00100000) #define WLAN_GPIO_OUT_BIT5 FIELD32(0x00200000) #define WLAN_GPIO_OUT_BIT6 FIELD32(0x00400000) #define WLAN_GPIO_OUT_BIT7 FIELD32(0x00800000) #define WLAN_GPIO_OUT_BIT_ALL FIELD32(0x00ff0000) #define WLAN_GPIO_OUT_OE_BIT0 FIELD32(0x01000000) #define WLAN_GPIO_OUT_OE_BIT1 FIELD32(0x02000000) #define WLAN_GPIO_OUT_OE_BIT2 FIELD32(0x04000000) #define WLAN_GPIO_OUT_OE_BIT3 FIELD32(0x08000000) #define WLAN_GPIO_OUT_OE_BIT4 FIELD32(0x10000000) #define WLAN_GPIO_OUT_OE_BIT5 FIELD32(0x20000000) #define WLAN_GPIO_OUT_OE_BIT6 FIELD32(0x40000000) #define WLAN_GPIO_OUT_OE_BIT7 FIELD32(0x80000000) #define WLAN_GPIO_OUT_OE_BIT_ALL FIELD32(0xff000000) /* * AUX_CTRL: Aux/PCI-E related configuration */ #define AUX_CTRL 0x10c #define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002) #define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400) /* * OPT_14: Unknown register used by rt3xxx devices. */ #define OPT_14_CSR 0x0114 #define OPT_14_CSR_BIT0 FIELD32(0x00000001) /* * INT_SOURCE_CSR: Interrupt source register. * Write one to clear corresponding bit. * TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO */ #define INT_SOURCE_CSR 0x0200 #define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) #define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) #define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) #define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) #define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) #define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) #define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) #define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) #define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) #define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) #define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) #define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) /* * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. */ #define INT_MASK_CSR 0x0204 #define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) #define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) #define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) #define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) #define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) #define INT_MASK_CSR_TBTT FIELD32(0x00000800) #define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) #define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) #define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) #define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) #define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) #define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) /* * WPDMA_GLO_CFG */ #define WPDMA_GLO_CFG 0x0208 #define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) #define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) #define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) #define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) #define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) #define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) #define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) #define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) #define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) /* * WPDMA_RST_IDX */ #define WPDMA_RST_IDX 0x020c #define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) #define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) #define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) #define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) #define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) #define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) #define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) /* * DELAY_INT_CFG */ #define DELAY_INT_CFG 0x0210 #define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) #define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) #define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) #define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) #define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) #define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) /* * WMM_AIFSN_CFG: Aifsn for each EDCA AC * AIFSN0: AC_VO * AIFSN1: AC_VI * AIFSN2: AC_BE * AIFSN3: AC_BK */ #define WMM_AIFSN_CFG 0x0214 #define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) #define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) #define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) #define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) /* * WMM_CWMIN_CSR: CWmin for each EDCA AC * CWMIN0: AC_VO * CWMIN1: AC_VI * CWMIN2: AC_BE * CWMIN3: AC_BK */ #define WMM_CWMIN_CFG 0x0218 #define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) #define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) #define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) #define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) /* * WMM_CWMAX_CSR: CWmax for each EDCA AC * CWMAX0: AC_VO * CWMAX1: AC_VI * CWMAX2: AC_BE * CWMAX3: AC_BK */ #define WMM_CWMAX_CFG 0x021c #define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) #define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) #define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) #define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) /* * AC_TXOP0: AC_VO/AC_VI TXOP register * AC0TXOP: AC_VO in unit of 32us * AC1TXOP: AC_VI in unit of 32us */ #define WMM_TXOP0_CFG 0x0220 #define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) #define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) /* * AC_TXOP1: AC_BE/AC_BK TXOP register * AC2TXOP: AC_BE in unit of 32us * AC3TXOP: AC_BK in unit of 32us */ #define WMM_TXOP1_CFG 0x0224 #define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) #define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) /* * GPIO_CTRL: * GPIO_CTRL_VALx: GPIO value * GPIO_CTRL_DIRx: GPIO direction: 0 = output; 1 = input */ #define GPIO_CTRL 0x0228 #define GPIO_CTRL_VAL0 FIELD32(0x00000001) #define GPIO_CTRL_VAL1 FIELD32(0x00000002) #define GPIO_CTRL_VAL2 FIELD32(0x00000004) #define GPIO_CTRL_VAL3 FIELD32(0x00000008) #define GPIO_CTRL_VAL4 FIELD32(0x00000010) #define GPIO_CTRL_VAL5 FIELD32(0x00000020) #define GPIO_CTRL_VAL6 FIELD32(0x00000040) #define GPIO_CTRL_VAL7 FIELD32(0x00000080) #define GPIO_CTRL_DIR0 FIELD32(0x00000100) #define GPIO_CTRL_DIR1 FIELD32(0x00000200) #define GPIO_CTRL_DIR2 FIELD32(0x00000400) #define GPIO_CTRL_DIR3 FIELD32(0x00000800) #define GPIO_CTRL_DIR4 FIELD32(0x00001000) #define GPIO_CTRL_DIR5 FIELD32(0x00002000) #define GPIO_CTRL_DIR6 FIELD32(0x00004000) #define GPIO_CTRL_DIR7 FIELD32(0x00008000) #define GPIO_CTRL_VAL8 FIELD32(0x00010000) #define GPIO_CTRL_VAL9 FIELD32(0x00020000) #define GPIO_CTRL_VAL10 FIELD32(0x00040000) #define GPIO_CTRL_DIR8 FIELD32(0x01000000) #define GPIO_CTRL_DIR9 FIELD32(0x02000000) #define GPIO_CTRL_DIR10 FIELD32(0x04000000) /* * MCU_CMD_CFG */ #define MCU_CMD_CFG 0x022c /* * AC_VO register offsets */ #define TX_BASE_PTR0 0x0230 #define TX_MAX_CNT0 0x0234 #define TX_CTX_IDX0 0x0238 #define TX_DTX_IDX0 0x023c /* * AC_VI register offsets */ #define TX_BASE_PTR1 0x0240 #define TX_MAX_CNT1 0x0244 #define TX_CTX_IDX1 0x0248 #define TX_DTX_IDX1 0x024c /* * AC_BE register offsets */ #define TX_BASE_PTR2 0x0250 #define TX_MAX_CNT2 0x0254 #define TX_CTX_IDX2 0x0258 #define TX_DTX_IDX2 0x025c /* * AC_BK register offsets */ #define TX_BASE_PTR3 0x0260 #define TX_MAX_CNT3 0x0264 #define TX_CTX_IDX3 0x0268 #define TX_DTX_IDX3 0x026c /* * HCCA register offsets */ #define TX_BASE_PTR4 0x0270 #define TX_MAX_CNT4 0x0274 #define TX_CTX_IDX4 0x0278 #define TX_DTX_IDX4 0x027c /* * MGMT register offsets */ #define TX_BASE_PTR5 0x0280 #define TX_MAX_CNT5 0x0284 #define TX_CTX_IDX5 0x0288 #define TX_DTX_IDX5 0x028c /* * RX register offsets */ #define RX_BASE_PTR 0x0290 #define RX_MAX_CNT 0x0294 #define RX_CRX_IDX 0x0298 #define RX_DRX_IDX 0x029c /* * USB_DMA_CFG * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. * PHY_CLEAR: phy watch dog enable. * TX_CLEAR: Clear USB DMA TX path. * TXOP_HALT: Halt TXOP count down when TX buffer is full. * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. * RX_BULK_EN: Enable USB DMA Rx. * TX_BULK_EN: Enable USB DMA Tx. * EP_OUT_VALID: OUT endpoint data valid. * RX_BUSY: USB DMA RX FSM busy. * TX_BUSY: USB DMA TX FSM busy. */ #define USB_DMA_CFG 0x02a0 #define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) #define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) #define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) #define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) #define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) #define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) #define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) #define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) #define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) #define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) #define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) /* * US_CYC_CNT * BT_MODE_EN: Bluetooth mode enable * CLOCK CYCLE: Clock cycle count in 1us. * PCI:0x21, PCIE:0x7d, USB:0x1e */ #define US_CYC_CNT 0x02a4 #define US_CYC_CNT_BT_MODE_EN FIELD32(0x00000100) #define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) /* * PBF_SYS_CTRL * HOST_RAM_WRITE: enable Host program ram write selection */ #define PBF_SYS_CTRL 0x0400 #define PBF_SYS_CTRL_READY FIELD32(0x00000080) #define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) /* * HOST-MCU shared memory */ #define HOST_CMD_CSR 0x0404 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) /* * PBF registers * Most are for debug. Driver doesn't touch PBF register. */ #define PBF_CFG 0x0408 #define PBF_MAX_PCNT 0x040c #define PBF_CTRL 0x0410 #define PBF_INT_STA 0x0414 #define PBF_INT_ENA 0x0418 /* * BCN_OFFSET0: */ #define BCN_OFFSET0 0x042c #define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) #define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) #define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) #define BCN_OFFSET0_BCN3 FIELD32(0xff000000) /* * BCN_OFFSET1: */ #define BCN_OFFSET1 0x0430 #define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) #define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) #define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) #define BCN_OFFSET1_BCN7 FIELD32(0xff000000) /* * TXRXQ_PCNT: PBF register * PCNT_TX0Q: Page count for TX hardware queue 0 * PCNT_TX1Q: Page count for TX hardware queue 1 * PCNT_TX2Q: Page count for TX hardware queue 2 * PCNT_RX0Q: Page count for RX hardware queue */ #define TXRXQ_PCNT 0x0438 #define TXRXQ_PCNT_TX0Q FIELD32(0x000000ff) #define TXRXQ_PCNT_TX1Q FIELD32(0x0000ff00) #define TXRXQ_PCNT_TX2Q FIELD32(0x00ff0000) #define TXRXQ_PCNT_RX0Q FIELD32(0xff000000) /* * PBF register * Debug. Driver doesn't touch PBF register. */ #define PBF_DBG 0x043c /* * RF registers */ #define RF_CSR_CFG 0x0500 #define RF_CSR_CFG_DATA FIELD32(0x000000ff) #define RF_CSR_CFG_REGNUM FIELD32(0x00003f00) #define RF_CSR_CFG_WRITE FIELD32(0x00010000) #define RF_CSR_CFG_BUSY FIELD32(0x00020000) /* * MT7620 RF registers (reversed order) */ #define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00) #define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000) #define RF_CSR_CFG_WRITE_MT7620 FIELD32(0x00000010) #define RF_CSR_CFG_BUSY_MT7620 FIELD32(0x00000001) /* undocumented registers for calibration of new MAC */ #define RF_CONTROL0 0x0518 #define RF_BYPASS0 0x051c #define RF_CONTROL1 0x0520 #define RF_BYPASS1 0x0524 #define RF_CONTROL2 0x0528 #define RF_BYPASS2 0x052c #define RF_CONTROL3 0x0530 #define RF_BYPASS3 0x0534 /* * EFUSE_CSR: RT30x0 EEPROM */ #define EFUSE_CTRL 0x0580 #define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) #define EFUSE_CTRL_MODE FIELD32(0x000000c0) #define EFUSE_CTRL_KICK FIELD32(0x40000000) #define EFUSE_CTRL_PRESENT FIELD32(0x80000000) /* * EFUSE_DATA0 */ #define EFUSE_DATA0 0x0590 /* * EFUSE_DATA1 */ #define EFUSE_DATA1 0x0594 /* * EFUSE_DATA2 */ #define EFUSE_DATA2 0x0598 /* * EFUSE_DATA3 */ #define EFUSE_DATA3 0x059c /* * LDO_CFG0 */ #define LDO_CFG0 0x05d4 #define LDO_CFG0_DELAY3 FIELD32(0x000000ff) #define LDO_CFG0_DELAY2 FIELD32(0x0000ff00) #define LDO_CFG0_DELAY1 FIELD32(0x00ff0000) #define LDO_CFG0_BGSEL FIELD32(0x03000000) #define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000) #define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000) #define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000) /* * GPIO_SWITCH */ #define GPIO_SWITCH 0x05dc #define GPIO_SWITCH_0 FIELD32(0x00000001) #define GPIO_SWITCH_1 FIELD32(0x00000002) #define GPIO_SWITCH_2 FIELD32(0x00000004) #define GPIO_SWITCH_3 FIELD32(0x00000008) #define GPIO_SWITCH_4 FIELD32(0x00000010) #define GPIO_SWITCH_5 FIELD32(0x00000020) #define GPIO_SWITCH_6 FIELD32(0x00000040) #define GPIO_SWITCH_7 FIELD32(0x00000080) /* * FIXME: where the DEBUG_INDEX name come from? */ #define MAC_DEBUG_INDEX 0x05e8 #define MAC_DEBUG_INDEX_XTAL FIELD32(0x80000000) /* * MAC Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ /* * MAC_CSR0: ASIC revision number. * ASIC_REV: 0 * ASIC_VER: 2860 or 2870 */ #define MAC_CSR0 0x1000 #define MAC_CSR0_REVISION FIELD32(0x0000ffff) #define MAC_CSR0_CHIPSET FIELD32(0xffff0000) /* * MAC_SYS_CTRL: */ #define MAC_SYS_CTRL 0x1004 #define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) #define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) #define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) #define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) #define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) #define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) #define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) #define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) /* * MAC_ADDR_DW0: STA MAC register 0 */ #define MAC_ADDR_DW0 0x1008 #define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) #define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) #define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) #define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) /* * MAC_ADDR_DW1: STA MAC register 1 * UNICAST_TO_ME_MASK: * Used to mask off bits from byte 5 of the MAC address * to determine the UNICAST_TO_ME bit for RX frames. * The full mask is complemented by BSS_ID_MASK: * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK */ #define MAC_ADDR_DW1 0x100c #define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) #define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) #define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) /* * MAC_BSSID_DW0: BSSID register 0 */ #define MAC_BSSID_DW0 0x1010 #define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) #define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) #define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) #define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) /* * MAC_BSSID_DW1: BSSID register 1 * BSS_ID_MASK: * 0: 1-BSSID mode (BSS index = 0) * 1: 2-BSSID mode (BSS index: Byte5, bit 0) * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the * BSSID. This will make sure that those bits will be ignored * when determining the MY_BSS of RX frames. */ #define MAC_BSSID_DW1 0x1014 #define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) #define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) #define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) #define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) /* * MAX_LEN_CFG: Maximum frame length register. * MAX_MPDU: rt2860b max 16k bytes * MAX_PSDU: Maximum PSDU length * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 */ #define MAX_LEN_CFG 0x1018 #define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) #define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) #define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) #define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) /* * BBP_CSR_CFG: BBP serial control register * VALUE: Register value to program into BBP * REG_NUM: Selected BBP register * READ_CONTROL: 0 write BBP, 1 read BBP * BUSY: ASIC is busy executing BBP commands * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks * BBP_RW_MODE: 0 serial, 1 parallel */ #define BBP_CSR_CFG 0x101c #define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) #define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) #define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) #define BBP_CSR_CFG_BUSY FIELD32(0x00020000) #define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) #define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) /* * RF_CSR_CFG0: RF control register * REGID_AND_VALUE: Register value to program into RF * BITWIDTH: Selected RF register * STANDBYMODE: 0 high when standby, 1 low when standby * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate * BUSY: ASIC is busy executing RF commands */ #define RF_CSR_CFG0 0x1020 #define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) #define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) #define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) #define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) #define RF_CSR_CFG0_SEL FIELD32(0x40000000) #define RF_CSR_CFG0_BUSY FIELD32(0x80000000) /* * RF_CSR_CFG1: RF control register * REGID_AND_VALUE: Register value to program into RF * RFGAP: Gap between BB_CONTROL_RF and RF_LE * 0: 3 system clock cycle (37.5usec) * 1: 5 system clock cycle (62.5usec) */ #define RF_CSR_CFG1 0x1024 #define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) #define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) /* * RF_CSR_CFG2: RF control register * VALUE: Register value to program into RF */ #define RF_CSR_CFG2 0x1028 #define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) /* * LED_CFG: LED control * ON_PERIOD: LED active time (ms) during TX (only used for LED mode 1) * OFF_PERIOD: LED inactive time (ms) during TX (only used for LED mode 1) * SLOW_BLINK_PERIOD: LED blink interval in seconds (only used for LED mode 2) * color LED's: * 0: off * 1: blinking upon TX2 * 2: periodic slow blinking * 3: always on * LED polarity: * 0: active low * 1: active high */ #define LED_CFG 0x102c #define LED_CFG_ON_PERIOD FIELD32(0x000000ff) #define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) #define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) #define LED_CFG_R_LED_MODE FIELD32(0x03000000) #define LED_CFG_G_LED_MODE FIELD32(0x0c000000) #define LED_CFG_Y_LED_MODE FIELD32(0x30000000) #define LED_CFG_LED_POLAR FIELD32(0x40000000) /* * AMPDU_BA_WINSIZE: Force BlockAck window size * FORCE_WINSIZE_ENABLE: * 0: Disable forcing of BlockAck window size * 1: Enable forcing of BlockAck window size, overwrites values BlockAck * window size values in the TXWI * FORCE_WINSIZE: BlockAck window size */ #define AMPDU_BA_WINSIZE 0x1040 #define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020) #define AMPDU_BA_WINSIZE_FORCE_WINSIZE FIELD32(0x0000001f) /* * XIFS_TIME_CFG: MAC timing * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX * when MAC doesn't reference BBP signal BBRXEND * EIFS: unit 1us * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer * */ #define XIFS_TIME_CFG 0x1100 #define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) #define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) #define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) #define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) #define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) /* * BKOFF_SLOT_CFG: */ #define BKOFF_SLOT_CFG 0x1104 #define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) #define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) /* * NAV_TIME_CFG: */ #define NAV_TIME_CFG 0x1108 #define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) #define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) #define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) #define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) /* * CH_TIME_CFG: count as channel busy * EIFS_BUSY: Count EIFS as channel busy * NAV_BUSY: Count NAS as channel busy * RX_BUSY: Count RX as channel busy * TX_BUSY: Count TX as channel busy * TMR_EN: Enable channel statistics timer */ #define CH_TIME_CFG 0x110c #define CH_TIME_CFG_EIFS_BUSY FIELD32(0x00000010) #define CH_TIME_CFG_NAV_BUSY FIELD32(0x00000008) #define CH_TIME_CFG_RX_BUSY FIELD32(0x00000004) #define CH_TIME_CFG_TX_BUSY FIELD32(0x00000002) #define CH_TIME_CFG_TMR_EN FIELD32(0x00000001) /* * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us */ #define PBF_LIFE_TIMER 0x1110 /* * BCN_TIME_CFG: * BEACON_INTERVAL: in unit of 1/16 TU * TSF_TICKING: Enable TSF auto counting * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode * BEACON_GEN: Enable beacon generator */ #define BCN_TIME_CFG 0x1114 #define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) #define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) #define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) #define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) #define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) #define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) /* * TBTT_SYNC_CFG: * BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots * BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots */ #define TBTT_SYNC_CFG 0x1118 #define TBTT_SYNC_CFG_TBTT_ADJUST FIELD32(0x000000ff) #define TBTT_SYNC_CFG_BCN_EXP_WIN FIELD32(0x0000ff00) #define TBTT_SYNC_CFG_BCN_AIFSN FIELD32(0x000f0000) #define TBTT_SYNC_CFG_BCN_CWMIN FIELD32(0x00f00000) /* * TSF_TIMER_DW0: Local lsb TSF timer, read-only */ #define TSF_TIMER_DW0 0x111c #define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) /* * TSF_TIMER_DW1: Local msb TSF timer, read-only */ #define TSF_TIMER_DW1 0x1120 #define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) /* * TBTT_TIMER: TImer remains till next TBTT, read-only */ #define TBTT_TIMER 0x1124 /* * INT_TIMER_CFG: timer configuration * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU * GP_TIMER: period of general purpose timer in units of 1/16 TU */ #define INT_TIMER_CFG 0x1128 #define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff) #define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000) /* * INT_TIMER_EN: GP-timer and pre-tbtt Int enable */ #define INT_TIMER_EN 0x112c #define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001) #define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002) /* * CH_IDLE_STA: channel idle time (in us) */ #define CH_IDLE_STA 0x1130 /* * CH_BUSY_STA: channel busy time on primary channel (in us) */ #define CH_BUSY_STA 0x1134 /* * CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us) */ #define CH_BUSY_STA_SEC 0x1138 /* * MAC_STATUS_CFG: * BBP_RF_BUSY: When set to 0, BBP and RF are stable. * if 1 or higher one of the 2 registers is busy. */ #define MAC_STATUS_CFG 0x1200 #define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) /* * PWR_PIN_CFG: */ #define PWR_PIN_CFG 0x1204 /* * AUTOWAKEUP_CFG: Manual power control / status register * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set * AUTOWAKE: 0:sleep, 1:awake */ #define AUTOWAKEUP_CFG 0x1208 #define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) #define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) /* * MIMO_PS_CFG: MIMO Power-save Configuration */ #define MIMO_PS_CFG 0x1210 #define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001) #define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006) #define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008) #define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010) #define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020) /* * EDCA_AC0_CFG: */ #define EDCA_AC0_CFG 0x1300 #define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) #define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) #define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) #define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) /* * EDCA_AC1_CFG: */ #define EDCA_AC1_CFG 0x1304 #define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) #define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) #define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) #define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) /* * EDCA_AC2_CFG: */ #define EDCA_AC2_CFG 0x1308 #define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) #define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) #define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) #define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) /* * EDCA_AC3_CFG: */ #define EDCA_AC3_CFG 0x130c #define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) #define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) #define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) #define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) /* * EDCA_TID_AC_MAP: */ #define EDCA_TID_AC_MAP 0x1310 /* * TX_PWR_CFG: */ #define TX_PWR_CFG_RATE0 FIELD32(0x0000000f) #define TX_PWR_CFG_RATE1 FIELD32(0x000000f0) #define TX_PWR_CFG_RATE2 FIELD32(0x00000f00) #define TX_PWR_CFG_RATE3 FIELD32(0x0000f000) #define TX_PWR_CFG_RATE4 FIELD32(0x000f0000) #define TX_PWR_CFG_RATE5 FIELD32(0x00f00000) #define TX_PWR_CFG_RATE6 FIELD32(0x0f000000) #define TX_PWR_CFG_RATE7 FIELD32(0xf0000000) /* * TX_PWR_CFG_0: */ #define TX_PWR_CFG_0 0x1314 #define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) #define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) #define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) #define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) #define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) #define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) #define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) #define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) /* bits for 3T devices */ #define TX_PWR_CFG_0_CCK1_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_0_CCK1_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_0_CCK5_CH0 FIELD32(0x00000f00) #define TX_PWR_CFG_0_CCK5_CH1 FIELD32(0x0000f000) #define TX_PWR_CFG_0_OFDM6_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000) #define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000) /* bits for new 2T devices */ #define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff) #define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00) #define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000) #define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000) /* * TX_PWR_CFG_1: */ #define TX_PWR_CFG_1 0x1318 #define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) #define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) #define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) #define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) #define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) #define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) #define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) #define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) /* bits for 3T devices */ #define TX_PWR_CFG_1_OFDM24_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_1_OFDM24_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_1_OFDM48_CH0 FIELD32(0x00000f00) #define TX_PWR_CFG_1_OFDM48_CH1 FIELD32(0x0000f000) #define TX_PWR_CFG_1_MCS0_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000) #define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000) /* bits for new 2T devices */ #define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff) #define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00) #define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000) #define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000) /* * TX_PWR_CFG_2: */ #define TX_PWR_CFG_2 0x131c #define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) #define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) #define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) #define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) #define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) #define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) #define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) #define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) /* bits for 3T devices */ #define TX_PWR_CFG_2_MCS4_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_2_MCS4_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_2_MCS6_CH0 FIELD32(0x00000f00) #define TX_PWR_CFG_2_MCS6_CH1 FIELD32(0x0000f000) #define TX_PWR_CFG_2_MCS8_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000) #define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000) /* bits for new 2T devices */ #define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff) #define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00) #define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000) #define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000) /* * TX_PWR_CFG_3: */ #define TX_PWR_CFG_3 0x1320 #define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) #define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) #define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) #define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) #define TX_PWR_CFG_3_UNKNOWN1 FIELD32(0x000f0000) #define TX_PWR_CFG_3_UNKNOWN2 FIELD32(0x00f00000) #define TX_PWR_CFG_3_UNKNOWN3 FIELD32(0x0f000000) #define TX_PWR_CFG_3_UNKNOWN4 FIELD32(0xf0000000) /* bits for 3T devices */ #define TX_PWR_CFG_3_MCS12_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_3_MCS12_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_3_MCS14_CH0 FIELD32(0x00000f00) #define TX_PWR_CFG_3_MCS14_CH1 FIELD32(0x0000f000) #define TX_PWR_CFG_3_STBC0_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000) #define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000) /* bits for new 2T devices */ #define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff) #define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00) #define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000) #define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000) /* * TX_PWR_CFG_4: */ #define TX_PWR_CFG_4 0x1324 #define TX_PWR_CFG_4_UNKNOWN5 FIELD32(0x0000000f) #define TX_PWR_CFG_4_UNKNOWN6 FIELD32(0x000000f0) #define TX_PWR_CFG_4_UNKNOWN7 FIELD32(0x00000f00) #define TX_PWR_CFG_4_UNKNOWN8 FIELD32(0x0000f000) /* bits for 3T devices */ #define TX_PWR_CFG_4_STBC4_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00) #define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000) /* bits for new 2T devices */ #define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff) #define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00) /* * TX_PIN_CFG: */ #define TX_PIN_CFG 0x1328 #define TX_PIN_CFG_PA_PE_DISABLE 0xfcfffff0 #define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) #define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) #define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) #define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) #define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) #define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) #define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) #define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) #define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) #define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) #define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) #define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) #define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) #define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) #define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) #define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) #define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) #define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) #define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) #define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000) #define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000) #define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000) #define TX_PIN_CFG_PA_PE_G2_POL FIELD32(0x08000000) #define TX_PIN_CFG_LNA_PE_A2_EN FIELD32(0x10000000) #define TX_PIN_CFG_LNA_PE_G2_EN FIELD32(0x20000000) #define TX_PIN_CFG_LNA_PE_A2_POL FIELD32(0x40000000) #define TX_PIN_CFG_LNA_PE_G2_POL FIELD32(0x80000000) /* * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz */ #define TX_BAND_CFG 0x132c #define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001) #define TX_BAND_CFG_A FIELD32(0x00000002) #define TX_BAND_CFG_BG FIELD32(0x00000004) /* * TX_SW_CFG0: */ #define TX_SW_CFG0 0x1330 /* * TX_SW_CFG1: */ #define TX_SW_CFG1 0x1334 /* * TX_SW_CFG2: */ #define TX_SW_CFG2 0x1338 /* * TXOP_THRES_CFG: */ #define TXOP_THRES_CFG 0x133c /* * TXOP_CTRL_CFG: * TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation * AC_TRUN_EN: Enable/Disable truncation for AC change * TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change * USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode * MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS * RESERVED_TRUN_EN: Reserved * LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection * EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz * transmissions if extension CCA is clear). * EXT_CCA_DLY: Extension CCA signal delay time (unit: us) * EXT_CWMIN: CwMin for extension channel backoff * 0: Disabled * */ #define TXOP_CTRL_CFG 0x1340 #define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN FIELD32(0x00000001) #define TXOP_CTRL_CFG_AC_TRUN_EN FIELD32(0x00000002) #define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN FIELD32(0x00000004) #define TXOP_CTRL_CFG_USER_MODE_TRUN_EN FIELD32(0x00000008) #define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN FIELD32(0x00000010) #define TXOP_CTRL_CFG_RESERVED_TRUN_EN FIELD32(0x00000020) #define TXOP_CTRL_CFG_LSIG_TXOP_EN FIELD32(0x00000040) #define TXOP_CTRL_CFG_EXT_CCA_EN FIELD32(0x00000080) #define TXOP_CTRL_CFG_EXT_CCA_DLY FIELD32(0x0000ff00) #define TXOP_CTRL_CFG_EXT_CWMIN FIELD32(0x000f0000) /* * TX_RTS_CFG: * RTS_THRES: unit:byte * RTS_FBK_EN: enable rts rate fallback */ #define TX_RTS_CFG 0x1344 #define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) #define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) #define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) /* * TX_TIMEOUT_CFG: * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. * it is recommended that: * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) */ #define TX_TIMEOUT_CFG 0x1348 #define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) #define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) #define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) /* * TX_RTY_CFG: * SHORT_RTY_LIMIT: short retry limit * LONG_RTY_LIMIT: long retry limit * LONG_RTY_THRE: Long retry threshoold * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode * 0:expired by retry limit, 1: expired by mpdu life timer * AGG_RTY_MODE: Aggregate MPDU retry mode * 0:expired by retry limit, 1: expired by mpdu life timer * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable */ #define TX_RTY_CFG 0x134c #define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) #define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) #define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) #define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) #define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) #define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) /* * TX_LINK_CFG: * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us * MFB_ENABLE: TX apply remote MFB 1:enable * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable * 0: not apply remote remote unsolicit (MFS=7) * TX_MRQ_EN: MCS request TX enable * TX_RDG_EN: RDG TX enable * TX_CF_ACK_EN: Piggyback CF-ACK enable * REMOTE_MFB: remote MCS feedback * REMOTE_MFS: remote MCS feedback sequence number */ #define TX_LINK_CFG 0x1350 #define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) #define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) #define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) #define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) #define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) #define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) #define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) #define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) /* * HT_FBK_CFG0: */ #define HT_FBK_CFG0 0x1354 #define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) #define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) #define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) #define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) #define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) #define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) #define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) #define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) /* * HT_FBK_CFG1: */ #define HT_FBK_CFG1 0x1358 #define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) #define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) #define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) #define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) #define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) #define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) #define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) #define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) /* * LG_FBK_CFG0: */ #define LG_FBK_CFG0 0x135c #define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) #define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) #define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) #define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) #define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) #define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) #define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) #define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) /* * LG_FBK_CFG1: */ #define LG_FBK_CFG1 0x1360 #define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) #define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) #define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) #define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) /* * CCK_PROT_CFG: CCK Protection * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) * PROTECT_CTRL: Protection control frame type for CCK TX * 0:none, 1:RTS/CTS, 2:CTS-to-self * PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV * PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow * RTS_TH_EN: RTS threshold enable on CCK TX */ #define CCK_PROT_CFG 0x1364 #define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define CCK_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define CCK_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * OFDM_PROT_CFG: OFDM Protection */ #define OFDM_PROT_CFG 0x1368 #define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define OFDM_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * MM20_PROT_CFG: MM20 Protection */ #define MM20_PROT_CFG 0x136c #define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define MM20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * MM40_PROT_CFG: MM40 Protection */ #define MM40_PROT_CFG 0x1370 #define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define MM40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * GF20_PROT_CFG: GF20 Protection */ #define GF20_PROT_CFG 0x1374 #define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define GF20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * GF40_PROT_CFG: GF40 Protection */ #define GF40_PROT_CFG 0x1378 #define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) #define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) #define GF40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) #define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) #define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) #define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) #define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) /* * EXP_CTS_TIME: */ #define EXP_CTS_TIME 0x137c /* * EXP_ACK_TIME: */ #define EXP_ACK_TIME 0x1380 /* TX_PWR_CFG_5 */ #define TX_PWR_CFG_5 0x1384 #define TX_PWR_CFG_5_MCS16_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_5_MCS16_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_5_MCS16_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_5_MCS18_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_5_MCS18_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_5_MCS18_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_6 */ #define TX_PWR_CFG_6 0x1388 #define TX_PWR_CFG_6_MCS20_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_6_MCS20_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_6_MCS20_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_6_MCS22_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_6_MCS22_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_6_MCS22_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_0_EXT */ #define TX_PWR_CFG_0_EXT 0x1390 #define TX_PWR_CFG_0_EXT_CCK1_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_0_EXT_CCK5_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_0_EXT_OFDM6_CH2 FIELD32(0x000f0000) #define TX_PWR_CFG_0_EXT_OFDM12_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_1_EXT */ #define TX_PWR_CFG_1_EXT 0x1394 #define TX_PWR_CFG_1_EXT_OFDM24_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_1_EXT_OFDM48_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_1_EXT_MCS0_CH2 FIELD32(0x000f0000) #define TX_PWR_CFG_1_EXT_MCS2_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_2_EXT */ #define TX_PWR_CFG_2_EXT 0x1398 #define TX_PWR_CFG_2_EXT_MCS4_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_2_EXT_MCS6_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_2_EXT_MCS8_CH2 FIELD32(0x000f0000) #define TX_PWR_CFG_2_EXT_MCS10_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_3_EXT */ #define TX_PWR_CFG_3_EXT 0x139c #define TX_PWR_CFG_3_EXT_MCS12_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_3_EXT_MCS14_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_3_EXT_STBC0_CH2 FIELD32(0x000f0000) #define TX_PWR_CFG_3_EXT_STBC2_CH2 FIELD32(0x0f000000) /* TX_PWR_CFG_4_EXT */ #define TX_PWR_CFG_4_EXT 0x13a0 #define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00) /* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2] * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB */ #define TX0_RF_GAIN_CORRECT 0x13a0 #define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) #define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) #define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) #define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) #define TX1_RF_GAIN_CORRECT 0x13a4 #define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) #define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) #define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) #define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) /* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level * Format: 7-bit, signed value * Unit: 0.5 dB, Range: -20 dB to -5 dB */ #define TX0_RF_GAIN_ATTEN 0x13a8 #define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) #define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) #define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) #define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) #define TX1_RF_GAIN_ATTEN 0x13ac #define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) #define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) #define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) #define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) /* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0 * TX_ALC_LIMIT_n: TXn upper limit * TX_ALC_CH_INIT_n: TXn channel initial transmission gain * Unit: 0.5 dB, Range: 0 to 23.5 dB */ #define TX_ALC_CFG_0 0x13b0 #define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f) #define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00) #define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000) #define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000) /* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1 * TX_TEMP_COMP: TX Power Temperature Compensation * Unit: 0.5 dB, Range: -10 dB to 10 dB * TXn_GAIN_FINE: TXn Gain Fine Adjustment * Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB * RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after * deassertion of PA_PE. * Unit: 0.25 usec * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector * RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE * deassertion if RF_TOS_DONE is missing. * Unit: 0.25 usec * RF_TOS_ENABLE: TX offset calibration enable * ROS_BUSY_EN: RX offset calibration busy enable */ #define TX_ALC_CFG_1 0x13b4 #define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f) #define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00) #define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000) #define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000) #define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000) #define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000) #define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000) #define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000) #define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000) /* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level * Format: 5-bit signed values * Unit: 0.5 dB, Range: -8 dB to 7 dB */ #define TX0_BB_GAIN_ATTEN 0x13c0 #define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) #define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) #define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) #define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) #define TX1_BB_GAIN_ATTEN 0x13c4 #define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) #define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) #define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) #define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) /* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */ #define TX_ALC_VGA3 0x13c8 #define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f) #define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00) #define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000) #define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000) /* TX_PWR_CFG_7 */ #define TX_PWR_CFG_7 0x13d4 #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_7_OFDM54_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_7_OFDM54_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000) /* bits for new 2T devices */ #define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff) #define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000) /* TX_PWR_CFG_8 */ #define TX_PWR_CFG_8 0x13d8 #define TX_PWR_CFG_8_MCS15_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_8_MCS15_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_8_MCS15_CH2 FIELD32(0x00000f00) #define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000) #define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000) #define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000) /* bits for new 2T devices */ #define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff) /* TX_PWR_CFG_9 */ #define TX_PWR_CFG_9 0x13dc #define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f) #define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0) #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) /* bits for new 2T devices */ #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) /* * TX_TXBF_CFG: */ #define TX_TXBF_CFG_0 0x138c #define TX_TXBF_CFG_1 0x13a4 #define TX_TXBF_CFG_2 0x13a8 #define TX_TXBF_CFG_3 0x13ac /* * TX_FBK_CFG_3S: */ #define TX_FBK_CFG_3S_0 0x13c4 #define TX_FBK_CFG_3S_1 0x13c8 /* * RX_FILTER_CFG: RX configuration register. */ #define RX_FILTER_CFG 0x1400 #define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) #define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) #define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) #define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) #define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) #define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) #define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) #define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) #define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) #define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) #define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) #define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) #define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) #define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) #define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) #define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) #define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) /* * AUTO_RSP_CFG: * AUTORESPONDER: 0: disable, 1: enable * BAC_ACK_POLICY: 0:long, 1:short preamble * CTS_40_MMODE: Response CTS 40MHz duplicate mode * CTS_40_MREF: Response CTS 40MHz duplicate mode * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble * DUAL_CTS_EN: Power bit value in control frame * ACK_CTS_PSM_BIT:Power bit value in control frame */ #define AUTO_RSP_CFG 0x1404 #define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) #define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) #define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) #define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) #define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) #define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) #define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) /* * LEGACY_BASIC_RATE: */ #define LEGACY_BASIC_RATE 0x1408 /* * HT_BASIC_RATE: */ #define HT_BASIC_RATE 0x140c /* * HT_CTRL_CFG: */ #define HT_CTRL_CFG 0x1410 /* * SIFS_COST_CFG: */ #define SIFS_COST_CFG 0x1414 /* * RX_PARSER_CFG: * Set NAV for all received frames */ #define RX_PARSER_CFG 0x1418 /* * TX_SEC_CNT0: */ #define TX_SEC_CNT0 0x1500 /* * RX_SEC_CNT0: */ #define RX_SEC_CNT0 0x1504 /* * CCMP_FC_MUTE: */ #define CCMP_FC_MUTE 0x1508 /* * TXOP_HLDR_ADDR0: */ #define TXOP_HLDR_ADDR0 0x1600 /* * TXOP_HLDR_ADDR1: */ #define TXOP_HLDR_ADDR1 0x1604 /* * TXOP_HLDR_ET: */ #define TXOP_HLDR_ET 0x1608 /* * QOS_CFPOLL_RA_DW0: */ #define QOS_CFPOLL_RA_DW0 0x160c /* * QOS_CFPOLL_RA_DW1: */ #define QOS_CFPOLL_RA_DW1 0x1610 /* * QOS_CFPOLL_QC: */ #define QOS_CFPOLL_QC 0x1614 /* * RX_STA_CNT0: RX PLCP error count & RX CRC error count */ #define RX_STA_CNT0 0x1700 #define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) #define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) /* * RX_STA_CNT1: RX False CCA count & RX LONG frame count */ #define RX_STA_CNT1 0x1704 #define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) #define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) /* * RX_STA_CNT2: */ #define RX_STA_CNT2 0x1708 #define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) #define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) /* * TX_STA_CNT0: TX Beacon count */ #define TX_STA_CNT0 0x170c #define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) #define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) /* * TX_STA_CNT1: TX tx count */ #define TX_STA_CNT1 0x1710 #define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) #define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) /* * TX_STA_CNT2: TX tx count */ #define TX_STA_CNT2 0x1714 #define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) #define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) /* * TX_STA_FIFO: TX Result for specific PID status fifo register. * * This register is implemented as FIFO with 16 entries in the HW. Each * register read fetches the next tx result. If the FIFO is full because * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS) * triggered, the hw seems to simply drop further tx results. * * VALID: 1: this tx result is valid * 0: no valid tx result -> driver should stop reading * PID_TYPE: The PID latched from the PID field in the TXWI, can be used * to match a frame with its tx result (even though the PID is * only 4 bits wide). * PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3) * PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3) * This identification number is calculated by ((idx % 3) + 1). * TX_SUCCESS: Indicates tx success (1) or failure (0) * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0) * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0) * WCID: The wireless client ID. * MCS: The tx rate used during the last transmission of this frame, be it * successful or not. * PHYMODE: The phymode used for the transmission. */ #define TX_STA_FIFO 0x1718 #define TX_STA_FIFO_VALID FIELD32(0x00000001) #define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) #define TX_STA_FIFO_PID_QUEUE FIELD32(0x00000006) #define TX_STA_FIFO_PID_ENTRY FIELD32(0x00000018) #define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) #define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) #define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) #define TX_STA_FIFO_WCID FIELD32(0x0000ff00) #define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) #define TX_STA_FIFO_MCS FIELD32(0x007f0000) #define TX_STA_FIFO_BW FIELD32(0x00800000) #define TX_STA_FIFO_SGI FIELD32(0x01000000) #define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) /* * TX_AGG_CNT: Debug counter */ #define TX_AGG_CNT 0x171c #define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT0: */ #define TX_AGG_CNT0 0x1720 #define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT1: */ #define TX_AGG_CNT1 0x1724 #define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT2: */ #define TX_AGG_CNT2 0x1728 #define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT3: */ #define TX_AGG_CNT3 0x172c #define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT4: */ #define TX_AGG_CNT4 0x1730 #define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT5: */ #define TX_AGG_CNT5 0x1734 #define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT6: */ #define TX_AGG_CNT6 0x1738 #define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) /* * TX_AGG_CNT7: */ #define TX_AGG_CNT7 0x173c #define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) #define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) /* * MPDU_DENSITY_CNT: * TX_ZERO_DEL: TX zero length delimiter count * RX_ZERO_DEL: RX zero length delimiter count */ #define MPDU_DENSITY_CNT 0x1740 #define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) #define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) /* * Security key table memory. * * The pairwise key table shares some memory with the beacon frame * buffers 6 and 7. That basically means that when beacon 6 & 7 * are used we should only use the reduced pairwise key table which * has a maximum of 222 entries. * * --------------------------------------------- * |0x4000 | Pairwise Key | Reduced Pairwise | * | | Table | Key Table | * | | Size: 256 * 32 | Size: 222 * 32 | * |0x5BC0 | |------------------- * | | | Beacon 6 | * |0x5DC0 | |------------------- * | | | Beacon 7 | * |0x5FC0 | |------------------- * |0x5FFF | | * -------------------------- * * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry * SHARED_KEY_MODE_BASE: 4-byte * 16-entry */ #define MAC_WCID_BASE 0x1800 #define PAIRWISE_KEY_TABLE_BASE 0x4000 #define MAC_IVEIV_TABLE_BASE 0x6000 #define MAC_WCID_ATTRIBUTE_BASE 0x6800 #define SHARED_KEY_TABLE_BASE 0x6c00 #define SHARED_KEY_MODE_BASE 0x7000 #define MAC_WCID_ENTRY(__idx) \ (MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry))) #define PAIRWISE_KEY_ENTRY(__idx) \ (PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) #define MAC_IVEIV_ENTRY(__idx) \ (MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry))) #define MAC_WCID_ATTR_ENTRY(__idx) \ (MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32))) #define SHARED_KEY_ENTRY(__idx) \ (SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) #define SHARED_KEY_MODE_ENTRY(__idx) \ (SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32))) struct mac_wcid_entry { u8 mac[6]; u8 reserved[2]; } __packed; struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; u8 rx_mic[8]; } __packed; struct mac_iveiv_entry { u8 iv[8]; } __packed; /* * MAC_WCID_ATTRIBUTE: */ #define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) #define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) #define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) #define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) #define MAC_WCID_ATTRIBUTE_CIPHER_EXT FIELD32(0x00000400) #define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT FIELD32(0x00000800) #define MAC_WCID_ATTRIBUTE_WAPI_MCBC FIELD32(0x00008000) #define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000) /* * SHARED_KEY_MODE: */ #define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) #define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) #define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) #define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) #define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) #define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) #define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) #define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) /* * HOST-MCU communication */ /* * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. * CMD_TOKEN: Command id, 0xff disable status reporting. */ #define H2M_MAILBOX_CSR 0x7010 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) /* * H2M_MAILBOX_CID: * Free slots contain 0xff. MCU will store command's token to lowest free slot. * If all slots are occupied status will be dropped. */ #define H2M_MAILBOX_CID 0x7014 #define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) #define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) #define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) #define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) /* * H2M_MAILBOX_STATUS: * Command status will be saved to same slot as command id. */ #define H2M_MAILBOX_STATUS 0x701c /* * H2M_INT_SRC: */ #define H2M_INT_SRC 0x7024 /* * H2M_BBP_AGENT: */ #define H2M_BBP_AGENT 0x7028 /* * MCU_LEDCS: LED control for MCU Mailbox. */ #define MCU_LEDCS_LED_MODE FIELD8(0x1f) #define MCU_LEDCS_POLARITY FIELD8(0x01) /* * HW_CS_CTS_BASE: * Carrier-sense CTS frame base address. * It's where mac stores carrier-sense frame for carrier-sense function. */ #define HW_CS_CTS_BASE 0x7700 /* * HW_DFS_CTS_BASE: * DFS CTS frame base address. It's where mac stores CTS frame for DFS. */ #define HW_DFS_CTS_BASE 0x7780 /* * TXRX control registers - base address 0x3000 */ /* * TXRX_CSR1: * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. */ #define TXRX_CSR1 0x77d0 /* * HW_DEBUG_SETTING_BASE: * since NULL frame won't be that long (256 byte) * We steal 16 tail bytes to save debugging settings */ #define HW_DEBUG_SETTING_BASE 0x77f0 #define HW_DEBUG_SETTING_BASE2 0x7770 /* * HW_BEACON_BASE * In order to support maximum 8 MBSS and its maximum length * is 512 bytes for each beacon * Three section discontinue memory segments will be used. * 1. The original region for BCN 0~3 * 2. Extract memory from FCE table for BCN 4~5 * 3. Extract memory from Pair-wise key table for BCN 6~7 * It occupied those memory of wcid 238~253 for BCN 6 * and wcid 222~237 for BCN 7 (see Security key table memory * for more info). * * IMPORTANT NOTE: Not sure why legacy driver does this, * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. */ #define HW_BEACON_BASE0 0x7800 #define HW_BEACON_BASE1 0x7a00 #define HW_BEACON_BASE2 0x7c00 #define HW_BEACON_BASE3 0x7e00 #define HW_BEACON_BASE4 0x7200 #define HW_BEACON_BASE5 0x7400 #define HW_BEACON_BASE6 0x5dc0 #define HW_BEACON_BASE7 0x5bc0 #define HW_BEACON_BASE(__index) \ (((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \ (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) #define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) /* * BBP registers. * The wordsize of the BBP is 8 bits. */ /* * BBP 1: TX Antenna & Power Control * POWER_CTRL: * 0 - normal, * 1 - drop tx power by 6dBm, * 2 - drop tx power by 12dBm, * 3 - increase tx power by 6dBm */ #define BBP1_TX_POWER_CTRL FIELD8(0x03) #define BBP1_TX_ANTENNA FIELD8(0x18) /* * BBP 3: RX Antenna */ #define BBP3_RX_ADC FIELD8(0x03) #define BBP3_RX_ANTENNA FIELD8(0x18) #define BBP3_HT40_MINUS FIELD8(0x20) #define BBP3_ADC_MODE_SWITCH FIELD8(0x40) #define BBP3_ADC_INIT_MODE FIELD8(0x80) /* * BBP 4: Bandwidth */ #define BBP4_TX_BF FIELD8(0x01) #define BBP4_BANDWIDTH FIELD8(0x18) #define BBP4_MAC_IF_CTRL FIELD8(0x40) /* BBP27 */ #define BBP27_RX_CHAIN_SEL FIELD8(0x60) /* * BBP 47: Bandwidth */ #define BBP47_TSSI_REPORT_SEL FIELD8(0x03) #define BBP47_TSSI_UPDATE_REQ FIELD8(0x04) #define BBP47_TSSI_TSSI_MODE FIELD8(0x18) #define BBP47_TSSI_ADC6 FIELD8(0x80) /* * BBP 49 */ #define BBP49_UPDATE_FLAG FIELD8(0x01) /* * BBP 105: * - bit0: detect SIG on primary channel only (on 40MHz bandwidth) * - bit1: FEQ (Feed Forward Compensation) for independend streams * - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single * stream) * - bit4: channel estimation updates based on remodulation of * L-SIG and HT-SIG symbols */ #define BBP105_DETECT_SIG_ON_PRIMARY FIELD8(0x01) #define BBP105_FEQ FIELD8(0x02) #define BBP105_MLD FIELD8(0x04) #define BBP105_SIG_REMODULATION FIELD8(0x08) /* * BBP 109 */ #define BBP109_TX0_POWER FIELD8(0x0f) #define BBP109_TX1_POWER FIELD8(0xf0) /* BBP 110 */ #define BBP110_TX2_POWER FIELD8(0x0f) /* * BBP 138: Unknown */ #define BBP138_RX_ADC1 FIELD8(0x02) #define BBP138_RX_ADC2 FIELD8(0x04) #define BBP138_TX_DAC1 FIELD8(0x20) #define BBP138_TX_DAC2 FIELD8(0x40) /* * BBP 152: Rx Ant */ #define BBP152_RX_DEFAULT_ANT FIELD8(0x80) /* * BBP 254: unknown */ #define BBP254_BIT7 FIELD8(0x80) /* * RFCSR registers * The wordsize of the RFCSR is 8 bits. */ /* * RFCSR 1: */ #define RFCSR1_RF_BLOCK_EN FIELD8(0x01) #define RFCSR1_PLL_PD FIELD8(0x02) #define RFCSR1_RX0_PD FIELD8(0x04) #define RFCSR1_TX0_PD FIELD8(0x08) #define RFCSR1_RX1_PD FIELD8(0x10) #define RFCSR1_TX1_PD FIELD8(0x20) #define RFCSR1_RX2_PD FIELD8(0x40) #define RFCSR1_TX2_PD FIELD8(0x80) #define RFCSR1_TX2_EN_MT7620 FIELD8(0x02) /* * RFCSR 2: */ #define RFCSR2_RESCAL_BP FIELD8(0x40) #define RFCSR2_RESCAL_EN FIELD8(0x80) #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02) #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20) /* * RFCSR 3: */ #define RFCSR3_K FIELD8(0x0f) /* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */ #define RFCSR3_PA1_BIAS_CCK FIELD8(0x70) #define RFCSR3_PA2_CASCODE_BIAS_CCKK FIELD8(0x80) /* Bits for RF3290/RF5360/RF5362/RF5370/RF5372/RF5390/RF5392 */ #define RFCSR3_VCOCAL_EN FIELD8(0x80) /* Bits for RF3050 */ #define RFCSR3_BIT1 FIELD8(0x02) #define RFCSR3_BIT2 FIELD8(0x04) #define RFCSR3_BIT3 FIELD8(0x08) #define RFCSR3_BIT4 FIELD8(0x10) #define RFCSR3_BIT5 FIELD8(0x20) /* * RFCSR 4: * VCOCAL_EN used by MT7620 */ #define RFCSR4_VCOCAL_EN FIELD8(0x80) /* * FRCSR 5: */ #define RFCSR5_R1 FIELD8(0x0c) /* * RFCSR 6: */ #define RFCSR6_R1 FIELD8(0x03) #define RFCSR6_R2 FIELD8(0x40) #define RFCSR6_TXDIV FIELD8(0x0c) /* bits for RF3053 */ #define RFCSR6_VCO_IC FIELD8(0xc0) /* * RFCSR 7: */ #define RFCSR7_RF_TUNING FIELD8(0x01) #define RFCSR7_BIT1 FIELD8(0x02) #define RFCSR7_BIT2 FIELD8(0x04) #define RFCSR7_BIT3 FIELD8(0x08) #define RFCSR7_BIT4 FIELD8(0x10) #define RFCSR7_BIT5 FIELD8(0x20) #define RFCSR7_BITS67 FIELD8(0xc0) /* * RFCSR 9: */ #define RFCSR9_K FIELD8(0x0f) #define RFCSR9_N FIELD8(0x10) #define RFCSR9_UNKNOWN FIELD8(0x60) #define RFCSR9_MOD FIELD8(0x80) /* * RFCSR 11: */ #define RFCSR11_R FIELD8(0x03) #define RFCSR11_PLL_MOD FIELD8(0x0c) #define RFCSR11_MOD FIELD8(0xc0) /* bits for RF3053 */ /* TODO: verify RFCSR11_MOD usage on other chips */ #define RFCSR11_PLL_IDOH FIELD8(0x40) /* * RFCSR 12: */ #define RFCSR12_TX_POWER FIELD8(0x1f) #define RFCSR12_DR0 FIELD8(0xe0) /* * RFCSR 13: */ #define RFCSR13_TX_POWER FIELD8(0x1f) #define RFCSR13_DR0 FIELD8(0xe0) #define RFCSR13_RDIV_MT7620 FIELD8(0x03) /* * RFCSR 15: */ #define RFCSR15_TX_LO2_EN FIELD8(0x08) /* * RFCSR 16: */ #define RFCSR16_TXMIXER_GAIN FIELD8(0x07) #define RFCSR16_RF_PLL_FREQ_SEL_MT7620 FIELD8(0x0F) #define RFCSR16_SDM_MODE_MT7620 FIELD8(0xE0) /* * RFCSR 17: */ #define RFCSR17_TXMIXER_GAIN FIELD8(0x07) #define RFCSR17_TX_LO1_EN FIELD8(0x08) #define RFCSR17_R FIELD8(0x20) #define RFCSR17_CODE FIELD8(0x7f) /* RFCSR 18 */ #define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40) /* RFCSR 19 */ #define RFCSR19_K FIELD8(0x03) /* * RFCSR 20: */ #define RFCSR20_RX_LO1_EN FIELD8(0x08) /* * RFCSR 21: */ #define RFCSR21_RX_LO2_EN FIELD8(0x08) #define RFCSR21_BIT1 FIELD8(0x01) #define RFCSR21_BIT8 FIELD8(0x80) /* * RFCSR 22: */ #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) #define RFCSR22_FREQPLAN_D_MT7620 FIELD8(0x07) /* * RFCSR 23: */ #define RFCSR23_FREQ_OFFSET FIELD8(0x7f) /* * RFCSR 24: */ #define RFCSR24_TX_AGC_FC FIELD8(0x1f) #define RFCSR24_TX_H20M FIELD8(0x20) #define RFCSR24_TX_CALIB FIELD8(0x7f) /* * RFCSR 27: */ #define RFCSR27_R1 FIELD8(0x03) #define RFCSR27_R2 FIELD8(0x04) #define RFCSR27_R3 FIELD8(0x30) #define RFCSR27_R4 FIELD8(0x40) /* * RFCSR 28: */ #define RFCSR28_CH11_HT40 FIELD8(0x04) /* * RFCSR 29: */ #define RFCSR29_ADC6_TEST FIELD8(0x01) #define RFCSR29_ADC6_INT_TEST FIELD8(0x02) #define RFCSR29_RSSI_RESET FIELD8(0x04) #define RFCSR29_RSSI_ON FIELD8(0x08) #define RFCSR29_RSSI_RIP_CTRL FIELD8(0x30) #define RFCSR29_RSSI_GAIN FIELD8(0xc0) /* * RFCSR 30: */ #define RFCSR30_TX_H20M FIELD8(0x02) #define RFCSR30_RX_H20M FIELD8(0x04) #define RFCSR30_RX_VCM FIELD8(0x18) #define RFCSR30_RF_CALIBRATION FIELD8(0x80) #define RF3322_RFCSR30_TX_H20M FIELD8(0x01) #define RF3322_RFCSR30_RX_H20M FIELD8(0x02) /* * RFCSR 31: */ #define RFCSR31_RX_AGC_FC FIELD8(0x1f) #define RFCSR31_RX_H20M FIELD8(0x20) #define RFCSR31_RX_CALIB FIELD8(0x7f) /* RFCSR 32 bits for RF3053 */ #define RFCSR32_TX_AGC_FC FIELD8(0xf8) /* RFCSR 36 bits for RF3053 */ #define RFCSR36_RF_BS FIELD8(0x80) /* * RFCSR 34: */ #define RFCSR34_TX0_EXT_PA FIELD8(0x04) #define RFCSR34_TX1_EXT_PA FIELD8(0x08) /* * RFCSR 38: */ #define RFCSR38_RX_LO1_EN FIELD8(0x20) /* * RFCSR 39: */ #define RFCSR39_RX_DIV FIELD8(0x40) #define RFCSR39_RX_LO2_EN FIELD8(0x80) /* * RFCSR 41: */ #define RFCSR41_BIT1 FIELD8(0x01) #define RFCSR41_BIT4 FIELD8(0x08) /* * RFCSR 42: */ #define RFCSR42_BIT1 FIELD8(0x01) #define RFCSR42_BIT4 FIELD8(0x08) #define RFCSR42_TX2_EN_MT7620 FIELD8(0x40) /* * RFCSR 49: */ #define RFCSR49_TX FIELD8(0x3f) #define RFCSR49_EP FIELD8(0xc0) /* bits for RT3593 */ #define RFCSR49_TX_LO1_IC FIELD8(0x1c) #define RFCSR49_TX_DIV FIELD8(0x20) /* * RFCSR 50: */ #define RFCSR50_TX FIELD8(0x3f) #define RFCSR50_TX0_EXT_PA FIELD8(0x02) #define RFCSR50_TX1_EXT_PA FIELD8(0x10) #define RFCSR50_EP FIELD8(0xc0) /* bits for RT3593 */ #define RFCSR50_TX_LO1_EN FIELD8(0x20) #define RFCSR50_TX_LO2_EN FIELD8(0x10) /* RFCSR 51 */ /* bits for RT3593 */ #define RFCSR51_BITS01 FIELD8(0x03) #define RFCSR51_BITS24 FIELD8(0x1c) #define RFCSR51_BITS57 FIELD8(0xe0) #define RFCSR53_TX_POWER FIELD8(0x3f) #define RFCSR53_UNKNOWN FIELD8(0xc0) #define RFCSR54_TX_POWER FIELD8(0x3f) #define RFCSR54_UNKNOWN FIELD8(0xc0) #define RFCSR55_TX_POWER FIELD8(0x3f) #define RFCSR55_UNKNOWN FIELD8(0xc0) #define RFCSR57_DRV_CC FIELD8(0xfc) /* * RF registers */ /* * RF 2 */ #define RF2_ANTENNA_RX2 FIELD32(0x00000040) #define RF2_ANTENNA_TX1 FIELD32(0x00004000) #define RF2_ANTENNA_RX1 FIELD32(0x00020000) /* * RF 3 */ #define RF3_TXPOWER_G FIELD32(0x00003e00) #define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) #define RF3_TXPOWER_A FIELD32(0x00003c00) /* * RF 4 */ #define RF4_TXPOWER_G FIELD32(0x000007c0) #define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) #define RF4_TXPOWER_A FIELD32(0x00000780) #define RF4_FREQ_OFFSET FIELD32(0x001f8000) #define RF4_HT40 FIELD32(0x00200000) /* * EEPROM content. * The wordsize of the EEPROM is 16 bits. */ enum rt2800_eeprom_word { EEPROM_CHIP_ID = 0, EEPROM_VERSION, EEPROM_MAC_ADDR_0, EEPROM_MAC_ADDR_1, EEPROM_MAC_ADDR_2, EEPROM_NIC_CONF0, EEPROM_NIC_CONF1, EEPROM_FREQ, EEPROM_LED_AG_CONF, EEPROM_LED_ACT_CONF, EEPROM_LED_POLARITY, EEPROM_NIC_CONF2, EEPROM_LNA, EEPROM_RSSI_BG, EEPROM_RSSI_BG2, EEPROM_TXMIXER_GAIN_BG, EEPROM_RSSI_A, EEPROM_RSSI_A2, EEPROM_TXMIXER_GAIN_A, EEPROM_EIRP_MAX_TX_POWER, EEPROM_TXPOWER_DELTA, EEPROM_TXPOWER_BG1, EEPROM_TXPOWER_BG2, EEPROM_TSSI_BOUND_BG1, EEPROM_TSSI_BOUND_BG2, EEPROM_TSSI_BOUND_BG3, EEPROM_TSSI_BOUND_BG4, EEPROM_TSSI_BOUND_BG5, EEPROM_TXPOWER_A1, EEPROM_TXPOWER_A2, EEPROM_TXPOWER_INIT, EEPROM_TSSI_BOUND_A1, EEPROM_TSSI_BOUND_A2, EEPROM_TSSI_BOUND_A3, EEPROM_TSSI_BOUND_A4, EEPROM_TSSI_BOUND_A5, EEPROM_TXPOWER_BYRATE, EEPROM_BBP_START, /* IDs for extended EEPROM format used by three-chain devices */ EEPROM_EXT_LNA2, EEPROM_EXT_TXPOWER_BG3, EEPROM_EXT_TXPOWER_A3, /* New values must be added before this */ EEPROM_WORD_COUNT }; /* * EEPROM Version */ #define EEPROM_VERSION_FAE FIELD16(0x00ff) #define EEPROM_VERSION_VERSION FIELD16(0xff00) /* * HW MAC address. */ #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) /* * EEPROM NIC Configuration 0 * RXPATH: 1: 1R, 2: 2R, 3: 3R * TXPATH: 1: 1T, 2: 2T, 3: 3T * RF_TYPE: RFIC type */ #define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f) #define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0) #define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00) /* * EEPROM NIC Configuration 1 * HW_RADIO: 0: disable, 1: enable * EXTERNAL_TX_ALC: 0: disable, 1: enable * EXTERNAL_LNA_2G: 0: disable, 1: enable * EXTERNAL_LNA_5G: 0: disable, 1: enable * CARDBUS_ACCEL: 0: enable, 1: disable * BW40M_SB_2G: 0: disable, 1: enable * BW40M_SB_5G: 0: disable, 1: enable * WPS_PBC: 0: disable, 1: enable * BW40M_2G: 0: enable, 1: disable * BW40M_5G: 0: enable, 1: disable * BROADBAND_EXT_LNA: 0: disable, 1: enable * ANT_DIVERSITY: 00: Disable, 01: Diversity, * 10: Main antenna, 11: Aux antenna * INTERNAL_TX_ALC: 0: disable, 1: enable * BT_COEXIST: 0: disable, 1: enable * DAC_TEST: 0: disable, 1: enable * EXTERNAL_TX0_PA: 0: disable, 1: enable (only on RT3352) * EXTERNAL_TX1_PA: 0: disable, 1: enable (only on RT3352) */ #define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001) #define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002) #define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004) #define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008) #define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010) #define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020) #define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040) #define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080) #define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100) #define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200) #define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400) #define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800) #define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000) #define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000) #define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000) #define EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352 FIELD16(0x4000) #define EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352 FIELD16(0x8000) /* * EEPROM frequency */ #define EEPROM_FREQ_OFFSET FIELD16(0x00ff) #define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) #define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) /* * EEPROM LED * POLARITY_RDY_G: Polarity RDY_G setting. * POLARITY_RDY_A: Polarity RDY_A setting. * POLARITY_ACT: Polarity ACT setting. * POLARITY_GPIO_0: Polarity GPIO0 setting. * POLARITY_GPIO_1: Polarity GPIO1 setting. * POLARITY_GPIO_2: Polarity GPIO2 setting. * POLARITY_GPIO_3: Polarity GPIO3 setting. * POLARITY_GPIO_4: Polarity GPIO4 setting. * LED_MODE: Led mode. */ #define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) #define EEPROM_LED_LED_MODE FIELD16(0x1f00) /* * EEPROM NIC Configuration 2 * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved */ #define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) #define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) #define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) /* * EEPROM LNA */ #define EEPROM_LNA_BG FIELD16(0x00ff) #define EEPROM_LNA_A0 FIELD16(0xff00) /* * EEPROM RSSI BG offset */ #define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) #define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) /* * EEPROM RSSI BG2 offset */ #define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) #define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) /* * EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2). */ #define EEPROM_TXMIXER_GAIN_BG_VAL FIELD16(0x0007) /* * EEPROM RSSI A offset */ #define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) #define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) /* * EEPROM RSSI A2 offset */ #define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) #define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) /* * EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2). */ #define EEPROM_TXMIXER_GAIN_A_VAL FIELD16(0x0007) /* * EEPROM EIRP Maximum TX power values(unit: dbm) */ #define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff) #define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00) /* * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. * This is delta in 40MHZ. * VALUE: Tx Power dalta value, MAX=4(unit: dbm) * TYPE: 1: Plus the delta value, 0: minus the delta value * ENABLE: enable tx power compensation for 40BW */ #define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f) #define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040) #define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080) #define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00) #define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000) #define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000) /* * EEPROM TXPOWER 802.11BG */ #define EEPROM_TXPOWER_BG_SIZE 7 #define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) #define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11BG * MINUS4: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -4) * MINUS3: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -3) */ #define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11BG * MINUS2: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -2) * MINUS1: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -1) */ #define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11BG * REF: Reference TSSI value, no tx power changes needed * PLUS1: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 1) */ #define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11BG * PLUS2: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 2) * PLUS3: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 3) */ #define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11BG * PLUS4: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 4) * AGC_STEP: Temperature compensation step. */ #define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00) /* * EEPROM TXPOWER 802.11A */ #define EEPROM_TXPOWER_A_SIZE 6 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) #define EEPROM_TXPOWER_A_2 FIELD16(0xff00) /* EEPROM_TXPOWER_{A,G} fields for RT3593 */ #define EEPROM_TXPOWER_ALC FIELD8(0x1f) #define EEPROM_TXPOWER_FINE_CTRL FIELD8(0xe0) /* * EEPROM temperature compensation boundaries 802.11A * MINUS4: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -4) * MINUS3: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -3) */ #define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11A * MINUS2: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -2) * MINUS1: If the actual TSSI is below this boundary, tx power needs to be * reduced by (agc_step * -1) */ #define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11A * REF: Reference TSSI value, no tx power changes needed * PLUS1: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 1) */ #define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11A * PLUS2: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 2) * PLUS3: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 3) */ #define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00) /* * EEPROM temperature compensation boundaries 802.11A * PLUS4: If the actual TSSI is above this boundary, tx power needs to be * increased by (agc_step * 4) * AGC_STEP: Temperature compensation step. */ #define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff) #define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00) /* * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode */ #define EEPROM_TXPOWER_BYRATE_SIZE 9 #define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f) #define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0) #define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00) #define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000) /* * EEPROM BBP. */ #define EEPROM_BBP_SIZE 16 #define EEPROM_BBP_VALUE FIELD16(0x00ff) #define EEPROM_BBP_REG_ID FIELD16(0xff00) /* EEPROM_EXT_LNA2 */ #define EEPROM_EXT_LNA2_A1 FIELD16(0x00ff) #define EEPROM_EXT_LNA2_A2 FIELD16(0xff00) /* * EEPROM IQ Calibration, unlike other entries those are byte addresses. */ #define EEPROM_IQ_GAIN_CAL_TX0_2G 0x130 #define EEPROM_IQ_PHASE_CAL_TX0_2G 0x131 #define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G 0x132 #define EEPROM_IQ_GAIN_CAL_TX1_2G 0x133 #define EEPROM_IQ_PHASE_CAL_TX1_2G 0x134 #define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G 0x135 #define EEPROM_IQ_GAIN_CAL_RX0_2G 0x136 #define EEPROM_IQ_PHASE_CAL_RX0_2G 0x137 #define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G 0x138 #define EEPROM_IQ_GAIN_CAL_RX1_2G 0x139 #define EEPROM_IQ_PHASE_CAL_RX1_2G 0x13A #define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G 0x13B #define EEPROM_RF_IQ_COMPENSATION_CONTROL 0x13C #define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL 0x13D #define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G 0x144 #define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G 0x145 #define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G 0X146 #define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G 0x147 #define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G 0x148 #define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G 0x149 #define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G 0x14A #define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G 0x14B #define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G 0X14C #define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G 0x14D #define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G 0x14E #define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G 0x14F #define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G 0x150 #define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G 0x151 #define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152 #define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153 #define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154 #define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155 #define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G 0x156 #define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G 0x157 #define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G 0X158 #define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G 0x159 #define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G 0x15A #define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G 0x15B #define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G 0x15C #define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G 0x15D #define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G 0X15E #define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G 0x15F #define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G 0x160 #define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G 0x161 #define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G 0x162 #define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G 0x163 #define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164 #define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165 #define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166 #define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167 /* * MCU mailbox commands. * MCU_SLEEP - go to power-save mode. * arg1: 1: save as much power as possible, 0: save less power. * status: 1: success, 2: already asleep, * 3: maybe MAC is busy so can't finish this task. * MCU_RADIO_OFF * arg0: 0: do power-saving, NOT turn off radio. */ #define MCU_SLEEP 0x30 #define MCU_WAKEUP 0x31 #define MCU_RADIO_OFF 0x35 #define MCU_CURRENT 0x36 #define MCU_LED 0x50 #define MCU_LED_STRENGTH 0x51 #define MCU_LED_AG_CONF 0x52 #define MCU_LED_ACT_CONF 0x53 #define MCU_LED_LED_POLARITY 0x54 #define MCU_RADAR 0x60 #define MCU_BOOT_SIGNAL 0x72 #define MCU_ANT_SELECT 0X73 #define MCU_FREQ_OFFSET 0x74 #define MCU_BBP_SIGNAL 0x80 #define MCU_POWER_SAVE 0x83 #define MCU_BAND_SELECT 0x91 /* * MCU mailbox tokens */ #define TOKEN_SLEEP 1 #define TOKEN_RADIO_OFF 2 #define TOKEN_WAKEUP 3 /* * DMA descriptor defines. */ #define TXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32)) #define TXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32)) #define RXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32)) #define RXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32)) #define RXWI_DESC_SIZE_6WORDS (6 * sizeof(__le32)) /* * TX WI structure */ /* * Word0 * FRAG: 1 To inform TKIP engine this is a fragment. * MIMO_PS: The remote peer is in dynamic MIMO-PS mode * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs * BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will * duplicate the frame to both channels). * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will * aggregate consecutive frames with the same RA and QoS TID. If * a frame A with the same RA and QoS TID but AMPDU=0 is queued * directly after a frame B with AMPDU=1, frame A might still * get aggregated into the AMPDU started by frame B. So, setting * AMPDU to 0 does _not_ necessarily mean the frame is sent as * MPDU, it can still end up in an AMPDU if the previous frame * was tagged as AMPDU. */ #define TXWI_W0_FRAG FIELD32(0x00000001) #define TXWI_W0_MIMO_PS FIELD32(0x00000002) #define TXWI_W0_CF_ACK FIELD32(0x00000004) #define TXWI_W0_TS FIELD32(0x00000008) #define TXWI_W0_AMPDU FIELD32(0x00000010) #define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) #define TXWI_W0_TX_OP FIELD32(0x00000300) #define TXWI_W0_MCS FIELD32(0x007f0000) #define TXWI_W0_BW FIELD32(0x00800000) #define TXWI_W0_SHORT_GI FIELD32(0x01000000) #define TXWI_W0_STBC FIELD32(0x06000000) #define TXWI_W0_IFS FIELD32(0x08000000) #define TXWI_W0_PHYMODE FIELD32(0xc0000000) /* * Word1 * ACK: 0: No Ack needed, 1: Ack needed * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number * BW_WIN_SIZE: BA windows size of the recipient * WIRELESS_CLI_ID: Client ID for WCID table access * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame * PACKETID: Will be latched into the TX_STA_FIFO register once the according * frame was processed. If multiple frames are aggregated together * (AMPDU==1) the reported tx status will always contain the packet * id of the first frame. 0: Don't report tx status for this frame. * PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3) * PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3) * This identification number is calculated by ((idx % 3) + 1). * The (+1) is required to prevent PACKETID to become 0. */ #define TXWI_W1_ACK FIELD32(0x00000001) #define TXWI_W1_NSEQ FIELD32(0x00000002) #define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) #define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) #define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) #define TXWI_W1_PACKETID FIELD32(0xf0000000) #define TXWI_W1_PACKETID_QUEUE FIELD32(0x30000000) #define TXWI_W1_PACKETID_ENTRY FIELD32(0xc0000000) /* * Word2 */ #define TXWI_W2_IV FIELD32(0xffffffff) /* * Word3 */ #define TXWI_W3_EIV FIELD32(0xffffffff) /* * RX WI structure */ /* * Word0 */ #define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) #define RXWI_W0_KEY_INDEX FIELD32(0x00000300) #define RXWI_W0_BSSID FIELD32(0x00001c00) #define RXWI_W0_UDF FIELD32(0x0000e000) #define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) #define RXWI_W0_TID FIELD32(0xf0000000) /* * Word1 */ #define RXWI_W1_FRAG FIELD32(0x0000000f) #define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) #define RXWI_W1_MCS FIELD32(0x007f0000) #define RXWI_W1_BW FIELD32(0x00800000) #define RXWI_W1_SHORT_GI FIELD32(0x01000000) #define RXWI_W1_STBC FIELD32(0x06000000) #define RXWI_W1_PHYMODE FIELD32(0xc0000000) /* * Word2 */ #define RXWI_W2_RSSI0 FIELD32(0x000000ff) #define RXWI_W2_RSSI1 FIELD32(0x0000ff00) #define RXWI_W2_RSSI2 FIELD32(0x00ff0000) /* * Word3 */ #define RXWI_W3_SNR0 FIELD32(0x000000ff) #define RXWI_W3_SNR1 FIELD32(0x0000ff00) /* * Macros for converting txpower from EEPROM to mac80211 value * and from mac80211 value to register value. */ #define MIN_G_TXPOWER 0 #define MIN_A_TXPOWER -7 #define MAX_G_TXPOWER 31 #define MAX_A_TXPOWER 15 #define DEFAULT_TXPOWER 5 #define MIN_A_TXPOWER_3593 0 #define MAX_A_TXPOWER_3593 31 #define TXPOWER_G_FROM_DEV(__txpower) \ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) #define TXPOWER_A_FROM_DEV(__txpower) \ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) /* * Board's maximun TX power limitation */ #define EIRP_MAX_TX_POWER_LIMIT 0x50 /* * Number of TBTT intervals after which we have to adjust * the hw beacon timer. */ #define BCN_TBTT_OFFSET 64 #endif /* RT2800_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1