| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Juuso Oikarinen | 879 | 53.40% | 18 | 23.38% |
| Arik Nemtsov | 241 | 14.64% | 14 | 18.18% |
| Eliad Peller | 197 | 11.97% | 13 | 16.88% |
| Luciano Coelho | 129 | 7.84% | 10 | 12.99% |
| Shahar Levi | 62 | 3.77% | 5 | 6.49% |
| Eyal Shapira | 46 | 2.79% | 6 | 7.79% |
| Ido Yariv | 32 | 1.94% | 1 | 1.30% |
| Yair Shapira | 18 | 1.09% | 1 | 1.30% |
| Ido Reis | 9 | 0.55% | 1 | 1.30% |
| Guy Mishol | 9 | 0.55% | 1 | 1.30% |
| Teemu Paasikivi | 8 | 0.49% | 1 | 1.30% |
| Ram Amrani | 4 | 0.24% | 1 | 1.30% |
| Guy Eilam | 4 | 0.24% | 1 | 1.30% |
| Lucas De Marchi | 3 | 0.18% | 1 | 1.30% |
| Pontus Fuchs | 2 | 0.12% | 1 | 1.30% |
| Thomas Gleixner | 2 | 0.12% | 1 | 1.30% |
| Yoni Divinsky | 1 | 0.06% | 1 | 1.30% |
| Total | 1646 | 77 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * This file is part of wl1271 * * Copyright (C) 2009 Nokia Corporation * * Contact: Luciano Coelho <luciano.coelho@nokia.com> */ #ifndef __CONF_H__ #define __CONF_H__ enum { CONF_HW_BIT_RATE_1MBPS = BIT(0), CONF_HW_BIT_RATE_2MBPS = BIT(1), CONF_HW_BIT_RATE_5_5MBPS = BIT(2), CONF_HW_BIT_RATE_6MBPS = BIT(3), CONF_HW_BIT_RATE_9MBPS = BIT(4), CONF_HW_BIT_RATE_11MBPS = BIT(5), CONF_HW_BIT_RATE_12MBPS = BIT(6), CONF_HW_BIT_RATE_18MBPS = BIT(7), CONF_HW_BIT_RATE_22MBPS = BIT(8), CONF_HW_BIT_RATE_24MBPS = BIT(9), CONF_HW_BIT_RATE_36MBPS = BIT(10), CONF_HW_BIT_RATE_48MBPS = BIT(11), CONF_HW_BIT_RATE_54MBPS = BIT(12), CONF_HW_BIT_RATE_MCS_0 = BIT(13), CONF_HW_BIT_RATE_MCS_1 = BIT(14), CONF_HW_BIT_RATE_MCS_2 = BIT(15), CONF_HW_BIT_RATE_MCS_3 = BIT(16), CONF_HW_BIT_RATE_MCS_4 = BIT(17), CONF_HW_BIT_RATE_MCS_5 = BIT(18), CONF_HW_BIT_RATE_MCS_6 = BIT(19), CONF_HW_BIT_RATE_MCS_7 = BIT(20), CONF_HW_BIT_RATE_MCS_8 = BIT(21), CONF_HW_BIT_RATE_MCS_9 = BIT(22), CONF_HW_BIT_RATE_MCS_10 = BIT(23), CONF_HW_BIT_RATE_MCS_11 = BIT(24), CONF_HW_BIT_RATE_MCS_12 = BIT(25), CONF_HW_BIT_RATE_MCS_13 = BIT(26), CONF_HW_BIT_RATE_MCS_14 = BIT(27), CONF_HW_BIT_RATE_MCS_15 = BIT(28), }; enum { CONF_HW_RATE_INDEX_1MBPS = 0, CONF_HW_RATE_INDEX_2MBPS = 1, CONF_HW_RATE_INDEX_5_5MBPS = 2, CONF_HW_RATE_INDEX_11MBPS = 3, CONF_HW_RATE_INDEX_6MBPS = 4, CONF_HW_RATE_INDEX_9MBPS = 5, CONF_HW_RATE_INDEX_12MBPS = 6, CONF_HW_RATE_INDEX_18MBPS = 7, CONF_HW_RATE_INDEX_24MBPS = 8, CONF_HW_RATE_INDEX_36MBPS = 9, CONF_HW_RATE_INDEX_48MBPS = 10, CONF_HW_RATE_INDEX_54MBPS = 11, CONF_HW_RATE_INDEX_MCS0 = 12, CONF_HW_RATE_INDEX_MCS1 = 13, CONF_HW_RATE_INDEX_MCS2 = 14, CONF_HW_RATE_INDEX_MCS3 = 15, CONF_HW_RATE_INDEX_MCS4 = 16, CONF_HW_RATE_INDEX_MCS5 = 17, CONF_HW_RATE_INDEX_MCS6 = 18, CONF_HW_RATE_INDEX_MCS7 = 19, CONF_HW_RATE_INDEX_MCS7_SGI = 20, CONF_HW_RATE_INDEX_MCS0_40MHZ = 21, CONF_HW_RATE_INDEX_MCS1_40MHZ = 22, CONF_HW_RATE_INDEX_MCS2_40MHZ = 23, CONF_HW_RATE_INDEX_MCS3_40MHZ = 24, CONF_HW_RATE_INDEX_MCS4_40MHZ = 25, CONF_HW_RATE_INDEX_MCS5_40MHZ = 26, CONF_HW_RATE_INDEX_MCS6_40MHZ = 27, CONF_HW_RATE_INDEX_MCS7_40MHZ = 28, CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29, /* MCS8+ rates overlap with 40Mhz rates */ CONF_HW_RATE_INDEX_MCS8 = 21, CONF_HW_RATE_INDEX_MCS9 = 22, CONF_HW_RATE_INDEX_MCS10 = 23, CONF_HW_RATE_INDEX_MCS11 = 24, CONF_HW_RATE_INDEX_MCS12 = 25, CONF_HW_RATE_INDEX_MCS13 = 26, CONF_HW_RATE_INDEX_MCS14 = 27, CONF_HW_RATE_INDEX_MCS15 = 28, CONF_HW_RATE_INDEX_MCS15_SGI = 29, CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI, }; #define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff enum { CONF_SG_DISABLE = 0, CONF_SG_PROTECTIVE, CONF_SG_OPPORTUNISTIC }; #define WLCORE_CONF_SG_PARAMS_MAX 67 #define WLCORE_CONF_SG_PARAMS_ALL 0xff struct conf_sg_settings { u32 params[WLCORE_CONF_SG_PARAMS_MAX]; u8 state; } __packed; enum conf_rx_queue_type { CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ }; struct conf_rx_settings { /* * The maximum amount of time, in TU, before the * firmware discards the MSDU. * * Range: 0 - 0xFFFFFFFF */ u32 rx_msdu_life_time; /* * Packet detection threshold in the PHY. * * FIXME: details unknown. */ u32 packet_detection_threshold; /* * The longest time the STA will wait to receive traffic from the AP * after a PS-poll has been transmitted. * * Range: 0 - 200000 */ u16 ps_poll_timeout; /* * The longest time the STA will wait to receive traffic from the AP * after a frame has been sent from an UPSD enabled queue. * * Range: 0 - 200000 */ u16 upsd_timeout; /* * The number of octets in an MPDU, below which an RTS/CTS * handshake is not performed. * * Range: 0 - 4096 */ u16 rts_threshold; /* * The RX Clear Channel Assessment threshold in the PHY * (the energy threshold). * * Range: ENABLE_ENERGY_D == 0x140A * DISABLE_ENERGY_D == 0xFFEF */ u16 rx_cca_threshold; /* * Occupied Rx mem-blocks number which requires interrupting the host * (0 = no buffering, 0xffff = disabled). * * Range: u16 */ u16 irq_blk_threshold; /* * Rx packets number which requires interrupting the host * (0 = no buffering). * * Range: u16 */ u16 irq_pkt_threshold; /* * Max time in msec the FW may delay RX-Complete interrupt. * * Range: 1 - 100 */ u16 irq_timeout; /* * The RX queue type. * * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, */ u8 queue_type; } __packed; #define CONF_TX_MAX_RATE_CLASSES 10 #define CONF_TX_RATE_MASK_UNSPECIFIED 0 #define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS) #define CONF_TX_RATE_RETRY_LIMIT 10 /* basic rates for p2p operations (probe req/resp, etc.) */ #define CONF_TX_RATE_MASK_BASIC_P2P CONF_HW_BIT_RATE_6MBPS /* * Rates supported for data packets when operating as STA/AP. Note the absence * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop * one. The rate dropped is not mandatory under any operating mode. */ #define CONF_TX_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \ CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ CONF_HW_BIT_RATE_54MBPS) #define CONF_TX_CCK_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ CONF_HW_BIT_RATE_11MBPS) #define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \ CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \ CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ CONF_HW_BIT_RATE_54MBPS) #define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \ CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \ CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \ CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ CONF_HW_BIT_RATE_MCS_7) #define CONF_TX_MIMO_RATES (CONF_HW_BIT_RATE_MCS_8 | \ CONF_HW_BIT_RATE_MCS_9 | CONF_HW_BIT_RATE_MCS_10 | \ CONF_HW_BIT_RATE_MCS_11 | CONF_HW_BIT_RATE_MCS_12 | \ CONF_HW_BIT_RATE_MCS_13 | CONF_HW_BIT_RATE_MCS_14 | \ CONF_HW_BIT_RATE_MCS_15) /* * Default rates for management traffic when operating in AP mode. This * should be configured according to the basic rate set of the AP */ #define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) /* default rates for working as IBSS (11b and OFDM) */ #define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \ CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ CONF_HW_BIT_RATE_11MBPS | CONF_TX_OFDM_RATES); struct conf_tx_rate_class { /* * The rates enabled for this rate class. * * Range: CONF_HW_BIT_RATE_* bit mask */ u32 enabled_rates; /* * The dot11 short retry limit used for TX retries. * * Range: u8 */ u8 short_retry_limit; /* * The dot11 long retry limit used for TX retries. * * Range: u8 */ u8 long_retry_limit; /* * Flags controlling the attributes of TX transmission. * * Range: bit 0: Truncate - when set, FW attempts to send a frame stop * when the total valid per-rate attempts have * been exhausted; otherwise transmissions * will continue at the lowest available rate * until the appropriate one of the * short_retry_limit, long_retry_limit, * dot11_max_transmit_msdu_life_time, or * max_tx_life_time, is exhausted. * 1: Preamble Override - indicates if the preamble type * should be used in TX. * 2: Preamble Type - the type of the preamble to be used by * the policy (0 - long preamble, 1 - short preamble. */ u8 aflags; } __packed; #define CONF_TX_MAX_AC_COUNT 4 /* Slot number setting to start transmission at PIFS interval */ #define CONF_TX_AIFS_PIFS 1 /* Slot number setting to start transmission at DIFS interval normal * DCF access */ #define CONF_TX_AIFS_DIFS 2 enum conf_tx_ac { CONF_TX_AC_BE = 0, /* best effort / legacy */ CONF_TX_AC_BK = 1, /* background */ CONF_TX_AC_VI = 2, /* video */ CONF_TX_AC_VO = 3, /* voice */ CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */ CONF_TX_AC_ANY_TID = 0xff }; struct conf_tx_ac_category { /* * The AC class identifier. * * Range: enum conf_tx_ac */ u8 ac; /* * The contention window minimum size (in slots) for the access * class. * * Range: u8 */ u8 cw_min; /* * The contention window maximum size (in slots) for the access * class. * * Range: u8 */ u16 cw_max; /* * The AIF value (in slots) for the access class. * * Range: u8 */ u8 aifsn; /* * The TX Op Limit (in microseconds) for the access class. * * Range: u16 */ u16 tx_op_limit; } __packed; #define CONF_TX_MAX_TID_COUNT 8 /* Allow TX BA on all TIDs but 6,7. These are currently reserved in the FW */ #define CONF_TX_BA_ENABLED_TID_BITMAP 0x3F enum { CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ }; enum { CONF_PS_SCHEME_LEGACY = 0, CONF_PS_SCHEME_UPSD_TRIGGER = 1, CONF_PS_SCHEME_LEGACY_PSPOLL = 2, CONF_PS_SCHEME_SAPSD = 3, }; enum { CONF_ACK_POLICY_LEGACY = 0, CONF_ACK_POLICY_NO_ACK = 1, CONF_ACK_POLICY_BLOCK = 2, }; struct conf_tx_tid { u8 queue_id; u8 channel_type; u8 tsid; u8 ps_scheme; u8 ack_policy; u32 apsd_conf[2]; } __packed; struct conf_tx_settings { /* * The TX ED value for TELEC Enable/Disable. * * Range: 0, 1 */ u8 tx_energy_detection; /* * Configuration for rate classes for TX (currently only one * rate class supported). Used in non-AP mode. */ struct conf_tx_rate_class sta_rc_conf; /* * Configuration for access categories for TX rate control. */ u8 ac_conf_count; struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; /* * AP-mode - allow this number of TX retries to a station before an * event is triggered from FW. * In AP-mode the hlids of unreachable stations are given in the * "sta_tx_retry_exceeded" member in the event mailbox. */ u8 max_tx_retries; /* * AP-mode - after this number of seconds a connected station is * considered inactive. */ u16 ap_aging_period; /* * Configuration for TID parameters. */ u8 tid_conf_count; struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; /* * The TX fragmentation threshold. * * Range: u16 */ u16 frag_threshold; /* * Max time in msec the FW may delay frame TX-Complete interrupt. * * Range: u16 */ u16 tx_compl_timeout; /* * Completed TX packet count which requires to issue the TX-Complete * interrupt. * * Range: u16 */ u16 tx_compl_threshold; /* * The rate used for control messages and scanning on the 2.4GHz band * * Range: CONF_HW_BIT_RATE_* bit mask */ u32 basic_rate; /* * The rate used for control messages and scanning on the 5GHz band * * Range: CONF_HW_BIT_RATE_* bit mask */ u32 basic_rate_5; /* * TX retry limits for templates */ u8 tmpl_short_retry_limit; u8 tmpl_long_retry_limit; /* Time in ms for Tx watchdog timer to expire */ u32 tx_watchdog_timeout; /* * when a slow link has this much packets pending, it becomes a low * priority link, scheduling-wise */ u8 slow_link_thold; /* * when a fast link has this much packets pending, it becomes a low * priority link, scheduling-wise */ u8 fast_link_thold; } __packed; enum { CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F }; #define CONF_MAX_BCN_FILT_IE_COUNT 32 #define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) #define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) #define CONF_BCN_IE_OUI_LEN 3 #define CONF_BCN_IE_VER_LEN 2 struct conf_bcn_filt_rule { /* * IE number to which to associate a rule. * * Range: u8 */ u8 ie; /* * Rule to associate with the specific ie. * * Range: CONF_BCN_RULE_PASS_ON_* */ u8 rule; /* * OUI for the vendor specifie IE (221) */ u8 oui[CONF_BCN_IE_OUI_LEN]; /* * Type for the vendor specifie IE (221) */ u8 type; /* * Version for the vendor specifie IE (221) */ u8 version[CONF_BCN_IE_VER_LEN]; } __packed; #define CONF_MAX_RSSI_SNR_TRIGGERS 8 enum { CONF_TRIG_METRIC_RSSI_BEACON = 0, CONF_TRIG_METRIC_RSSI_DATA, CONF_TRIG_METRIC_SNR_BEACON, CONF_TRIG_METRIC_SNR_DATA }; enum { CONF_TRIG_EVENT_TYPE_LEVEL = 0, CONF_TRIG_EVENT_TYPE_EDGE }; enum { CONF_TRIG_EVENT_DIR_LOW = 0, CONF_TRIG_EVENT_DIR_HIGH, CONF_TRIG_EVENT_DIR_BIDIR }; struct conf_sig_weights { /* * RSSI from beacons average weight. * * Range: u8 */ u8 rssi_bcn_avg_weight; /* * RSSI from data average weight. * * Range: u8 */ u8 rssi_pkt_avg_weight; /* * SNR from beacons average weight. * * Range: u8 */ u8 snr_bcn_avg_weight; /* * SNR from data average weight. * * Range: u8 */ u8 snr_pkt_avg_weight; } __packed; enum conf_bcn_filt_mode { CONF_BCN_FILT_MODE_DISABLED = 0, CONF_BCN_FILT_MODE_ENABLED = 1 }; enum conf_bet_mode { CONF_BET_MODE_DISABLE = 0, CONF_BET_MODE_ENABLE = 1, }; struct conf_conn_settings { /* * Firmware wakeup conditions configuration. The host may set only * one bit. * * Range: CONF_WAKE_UP_EVENT_* */ u8 wake_up_event; /* * Listen interval for beacons or Dtims. * * Range: 0 for beacon and Dtim wakeup * 1-10 for x Dtims * 1-255 for x beacons */ u8 listen_interval; /* * Firmware wakeup conditions during suspend * Range: CONF_WAKE_UP_EVENT_* */ u8 suspend_wake_up_event; /* * Listen interval during suspend. * Currently will be in DTIMs (1-10) * */ u8 suspend_listen_interval; /* * Enable or disable the beacon filtering. * * Range: CONF_BCN_FILT_MODE_* */ u8 bcn_filt_mode; /* * Configure Beacon filter pass-thru rules. */ u8 bcn_filt_ie_count; struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; /* * The number of consecutive beacons to lose, before the firmware * becomes out of synch. * * Range: u32 */ u32 synch_fail_thold; /* * After out-of-synch, the number of TU's to wait without a further * received beacon (or probe response) before issuing the BSS_EVENT_LOSE * event. * * Range: u32 */ u32 bss_lose_timeout; /* * Beacon receive timeout. * * Range: u32 */ u32 beacon_rx_timeout; /* * Broadcast receive timeout. * * Range: u32 */ u32 broadcast_timeout; /* * Enable/disable reception of broadcast packets in power save mode * * Range: 1 - enable, 0 - disable */ u8 rx_broadcast_in_ps; /* * Consecutive PS Poll failures before sending event to driver * * Range: u8 */ u8 ps_poll_threshold; /* * Configuration of signal average weights. */ struct conf_sig_weights sig_weights; /* * Specifies if beacon early termination procedure is enabled or * disabled. * * Range: CONF_BET_MODE_* */ u8 bet_enable; /* * Specifies the maximum number of consecutive beacons that may be * early terminated. After this number is reached at least one full * beacon must be correctly received in FW before beacon ET * resumes. * * Range 0 - 255 */ u8 bet_max_consecutive; /* * Specifies the maximum number of times to try PSM entry if it fails * (if sending the appropriate null-func message fails.) * * Range 0 - 255 */ u8 psm_entry_retries; /* * Specifies the maximum number of times to try PSM exit if it fails * (if sending the appropriate null-func message fails.) * * Range 0 - 255 */ u8 psm_exit_retries; /* * Specifies the maximum number of times to try transmit the PSM entry * null-func frame for each PSM entry attempt * * Range 0 - 255 */ u8 psm_entry_nullfunc_retries; /* * Specifies the dynamic PS timeout in ms that will be used * by the FW when in AUTO_PS mode */ u16 dynamic_ps_timeout; /* * Specifies whether dynamic PS should be disabled and PSM forced. * This is required for certain WiFi certification tests. */ u8 forced_ps; /* * * Specifies the interval of the connection keep-alive null-func * frame in ms. * * Range: 1000 - 3600000 */ u32 keep_alive_interval; /* * Maximum listen interval supported by the driver in units of beacons. * * Range: u16 */ u8 max_listen_interval; /* * Default sleep authorization for a new STA interface. This determines * whether we can go to ELP. */ u8 sta_sleep_auth; /* * Default RX BA Activity filter configuration */ u8 suspend_rx_ba_activity; } __packed; enum { CONF_REF_CLK_19_2_E, CONF_REF_CLK_26_E, CONF_REF_CLK_38_4_E, CONF_REF_CLK_52_E, CONF_REF_CLK_38_4_M_XTAL, CONF_REF_CLK_26_M_XTAL, }; enum single_dual_band_enum { CONF_SINGLE_BAND, CONF_DUAL_BAND }; #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 #define CONF_NUMBER_OF_SUB_BANDS_5 7 #define CONF_NUMBER_OF_RATE_GROUPS 6 #define CONF_NUMBER_OF_CHANNELS_2_4 14 #define CONF_NUMBER_OF_CHANNELS_5 35 struct conf_itrim_settings { /* enable dco itrim */ u8 enable; /* moderation timeout in microsecs from the last TX */ u32 timeout; } __packed; enum conf_fast_wakeup { CONF_FAST_WAKEUP_ENABLE, CONF_FAST_WAKEUP_DISABLE, }; struct conf_pm_config_settings { /* * Host clock settling time * * Range: 0 - 30000 us */ u32 host_clk_settling_time; /* * Host fast wakeup support * * Range: enum conf_fast_wakeup */ u8 host_fast_wakeup_support; } __packed; struct conf_roam_trigger_settings { /* * The minimum interval between two trigger events. * * Range: 0 - 60000 ms */ u16 trigger_pacing; /* * The weight for rssi/beacon average calculation * * Range: 0 - 255 */ u8 avg_weight_rssi_beacon; /* * The weight for rssi/data frame average calculation * * Range: 0 - 255 */ u8 avg_weight_rssi_data; /* * The weight for snr/beacon average calculation * * Range: 0 - 255 */ u8 avg_weight_snr_beacon; /* * The weight for snr/data frame average calculation * * Range: 0 - 255 */ u8 avg_weight_snr_data; } __packed; struct conf_scan_settings { /* * The minimum time to wait on each channel for active scans * This value will be used whenever there's a connected interface. * * Range: u32 tu/1000 */ u32 min_dwell_time_active; /* * The maximum time to wait on each channel for active scans * This value will be currently used whenever there's a * connected interface. It shouldn't exceed 30000 (~30ms) to avoid * possible interference of voip traffic going on while scanning. * * Range: u32 tu/1000 */ u32 max_dwell_time_active; /* The minimum time to wait on each channel for active scans * when it's possible to have longer scan dwell times. * Currently this is used whenever we're idle on all interfaces. * Longer dwell times improve detection of networks within a * single scan. * * Range: u32 tu/1000 */ u32 min_dwell_time_active_long; /* The maximum time to wait on each channel for active scans * when it's possible to have longer scan dwell times. * See min_dwell_time_active_long * * Range: u32 tu/1000 */ u32 max_dwell_time_active_long; /* time to wait on the channel for passive scans (in TU/1000) */ u32 dwell_time_passive; /* time to wait on the channel for DFS scans (in TU/1000) */ u32 dwell_time_dfs; /* * Number of probe requests to transmit on each active scan channel * * Range: u8 */ u16 num_probe_reqs; /* * Scan trigger (split scan) timeout. The FW will split the scan * operation into slices of the given time and allow the FW to schedule * other tasks in between. * * Range: u32 Microsecs */ u32 split_scan_timeout; } __packed; struct conf_sched_scan_settings { /* * The base time to wait on the channel for active scans (in TU/1000). * The minimum dwell time is calculated according to this: * min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe * The maximum dwell time is calculated according to this: * max_dwell_time = min_dwell_time + max_dwell_time_delta */ u32 base_dwell_time; /* The delta between the min dwell time and max dwell time for * active scans (in TU/1000s). The max dwell time is used by the FW once * traffic is detected on the channel. */ u32 max_dwell_time_delta; /* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */ u32 dwell_time_delta_per_probe; /* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */ u32 dwell_time_delta_per_probe_5; /* time to wait on the channel for passive scans (in TU/1000) */ u32 dwell_time_passive; /* time to wait on the channel for DFS scans (in TU/1000) */ u32 dwell_time_dfs; /* number of probe requests to send on each channel in active scans */ u8 num_probe_reqs; /* RSSI threshold to be used for filtering */ s8 rssi_threshold; /* SNR threshold to be used for filtering */ s8 snr_threshold; /* * number of short intervals scheduled scan cycles before * switching to long intervals */ u8 num_short_intervals; /* interval between each long scheduled scan cycle (in ms) */ u16 long_interval; } __packed; struct conf_ht_setting { u8 rx_ba_win_size; u8 tx_ba_win_size; u16 inactivity_timeout; /* bitmap of enabled TIDs for TX BA sessions */ u8 tx_ba_tid_bitmap; } __packed; struct conf_memory_settings { /* Number of stations supported in IBSS mode */ u8 num_stations; /* Number of ssid profiles used in IBSS mode */ u8 ssid_profiles; /* Number of memory buffers allocated to rx pool */ u8 rx_block_num; /* Minimum number of blocks allocated to tx pool */ u8 tx_min_block_num; /* Disable/Enable dynamic memory */ u8 dynamic_memory; /* * Minimum required free tx memory blocks in order to assure optimum * performance * * Range: 0-120 */ u8 min_req_tx_blocks; /* * Minimum required free rx memory blocks in order to assure optimum * performance * * Range: 0-120 */ u8 min_req_rx_blocks; /* * Minimum number of mem blocks (free+used) guaranteed for TX * * Range: 0-120 */ u8 tx_min; } __packed; struct conf_fm_coex { u8 enable; u8 swallow_period; u8 n_divider_fref_set_1; u8 n_divider_fref_set_2; u16 m_divider_fref_set_1; u16 m_divider_fref_set_2; u32 coex_pll_stabilization_time; u16 ldo_stabilization_time; u8 fm_disturbed_band_margin; u8 swallow_clk_diff; } __packed; struct conf_rx_streaming_settings { /* * RX Streaming duration (in msec) from last tx/rx * * Range: u32 */ u32 duration; /* * Bitmap of tids to be polled during RX streaming. * (Note: it doesn't look like it really matters) * * Range: 0x1-0xff */ u8 queues; /* * RX Streaming interval. * (Note:this value is also used as the rx streaming timeout) * Range: 0 (disabled), 10 - 100 */ u8 interval; /* * enable rx streaming also when there is no coex activity */ u8 always; } __packed; #define CONF_FWLOG_MIN_MEM_BLOCKS 2 #define CONF_FWLOG_MAX_MEM_BLOCKS 16 struct conf_fwlog { /* Continuous or on-demand */ u8 mode; /* * Number of memory blocks dedicated for the FW logger * * Range: 2-16, or 0 to disable the FW logger */ u8 mem_blocks; /* Minimum log level threshold */ u8 severity; /* Include/exclude timestamps from the log messages */ u8 timestamp; /* See enum wl1271_fwlogger_output */ u8 output; /* Regulates the frequency of log messages */ u8 threshold; } __packed; #define ACX_RATE_MGMT_NUM_OF_RATES 13 struct conf_rate_policy_settings { u16 rate_retry_score; u16 per_add; u16 per_th1; u16 per_th2; u16 max_per; u8 inverse_curiosity_factor; u8 tx_fail_low_th; u8 tx_fail_high_th; u8 per_alpha_shift; u8 per_add_shift; u8 per_beta1_shift; u8 per_beta2_shift; u8 rate_check_up; u8 rate_check_down; u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES]; } __packed; struct conf_hangover_settings { u32 recover_time; u8 hangover_period; u8 dynamic_mode; u8 early_termination_mode; u8 max_period; u8 min_period; u8 increase_delta; u8 decrease_delta; u8 quiet_time; u8 increase_time; u8 window_size; } __packed; struct conf_recovery_settings { /* BUG() on fw recovery */ u8 bug_on_recovery; /* Prevent HW recovery. FW will remain stuck. */ u8 no_recovery; } __packed; /* * The conf version consists of 4 bytes. The two MSB are the wlcore * version, the two LSB are the lower driver's private conf * version. */ #define WLCORE_CONF_VERSION (0x0007 << 16) #define WLCORE_CONF_MASK 0xffff0000 #define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ sizeof(struct wlcore_conf)) struct wlcore_conf_header { __le32 magic; __le32 version; __le32 checksum; } __packed; struct wlcore_conf { struct conf_sg_settings sg; struct conf_rx_settings rx; struct conf_tx_settings tx; struct conf_conn_settings conn; struct conf_itrim_settings itrim; struct conf_pm_config_settings pm_config; struct conf_roam_trigger_settings roam_trigger; struct conf_scan_settings scan; struct conf_sched_scan_settings sched_scan; struct conf_ht_setting ht; struct conf_memory_settings mem; struct conf_fm_coex fm_coex; struct conf_rx_streaming_settings rx_streaming; struct conf_fwlog fwlog; struct conf_rate_policy_settings rate; struct conf_hangover_settings hangover; struct conf_recovery_settings recovery; } __packed; struct wlcore_conf_file { struct wlcore_conf_header header; struct wlcore_conf core; u8 priv[0]; } __packed; #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1