Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Matti Vaittinen | 2157 | 99.95% | 1 | 50.00% |
Alexandre Belloni | 1 | 0.05% | 1 | 50.00% |
Total | 2158 | 2 |
// SPDX-License-Identifier: GPL-2.0-or-later // // Copyright (C) 2018 ROHM Semiconductors // // RTC driver for ROHM BD70528 PMIC #include <linux/bcd.h> #include <linux/mfd/rohm-bd70528.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/rtc.h> /* * We read regs RTC_SEC => RTC_YEAR * this struct is ordered according to chip registers. * Keep it u8 only to avoid padding issues. */ struct bd70528_rtc_day { u8 sec; u8 min; u8 hour; } __packed; struct bd70528_rtc_data { struct bd70528_rtc_day time; u8 week; u8 day; u8 month; u8 year; } __packed; struct bd70528_rtc_wake { struct bd70528_rtc_day time; u8 ctrl; } __packed; struct bd70528_rtc_alm { struct bd70528_rtc_data data; u8 alm_mask; u8 alm_repeat; } __packed; struct bd70528_rtc { struct rohm_regmap_dev *mfd; struct device *dev; }; static int bd70528_set_wake(struct rohm_regmap_dev *bd70528, int enable, int *old_state) { int ret; unsigned int ctrl_reg; ret = regmap_read(bd70528->regmap, BD70528_REG_WAKE_EN, &ctrl_reg); if (ret) return ret; if (old_state) { if (ctrl_reg & BD70528_MASK_WAKE_EN) *old_state |= BD70528_WAKE_STATE_BIT; else *old_state &= ~BD70528_WAKE_STATE_BIT; if (!enable == !(*old_state & BD70528_WAKE_STATE_BIT)) return 0; } if (enable) ctrl_reg |= BD70528_MASK_WAKE_EN; else ctrl_reg &= ~BD70528_MASK_WAKE_EN; return regmap_write(bd70528->regmap, BD70528_REG_WAKE_EN, ctrl_reg); } static int bd70528_set_elapsed_tmr(struct rohm_regmap_dev *bd70528, int enable, int *old_state) { int ret; unsigned int ctrl_reg; /* * TBD * What is the purpose of elapsed timer ? * Is the timeout registers counting down, or is the disable - re-enable * going to restart the elapsed-time counting? If counting is restarted * the timeout should be decreased by the amount of time that has * elapsed since starting the timer. Maybe we should store the monotonic * clock value when timer is started so that if RTC is set while timer * is armed we could do the compensation. This is a hack if RTC/system * clk are drifting. OTOH, RTC controlled via I2C is in any case * inaccurate... */ ret = regmap_read(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, &ctrl_reg); if (ret) return ret; if (old_state) { if (ctrl_reg & BD70528_MASK_ELAPSED_TIMER_EN) *old_state |= BD70528_ELAPSED_STATE_BIT; else *old_state &= ~BD70528_ELAPSED_STATE_BIT; if ((!enable) == (!(*old_state & BD70528_ELAPSED_STATE_BIT))) return 0; } if (enable) ctrl_reg |= BD70528_MASK_ELAPSED_TIMER_EN; else ctrl_reg &= ~BD70528_MASK_ELAPSED_TIMER_EN; return regmap_write(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, ctrl_reg); } static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state, int *old_state) { int ret; ret = bd70528_wdt_set(r->mfd, new_state & BD70528_WDT_STATE_BIT, old_state); if (ret) { dev_err(r->dev, "Failed to disable WDG for RTC setting (%d)\n", ret); return ret; } ret = bd70528_set_elapsed_tmr(r->mfd, new_state & BD70528_ELAPSED_STATE_BIT, old_state); if (ret) { dev_err(r->dev, "Failed to disable 'elapsed timer' for RTC setting\n"); return ret; } ret = bd70528_set_wake(r->mfd, new_state & BD70528_WAKE_STATE_BIT, old_state); if (ret) { dev_err(r->dev, "Failed to disable 'wake timer' for RTC setting\n"); return ret; } return ret; } static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r, int old_state) { return bd70528_set_rtc_based_timers(r, old_state, NULL); } static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r, int *old_state) { return bd70528_set_rtc_based_timers(r, 0, old_state); } static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) { d->sec &= ~BD70528_MASK_RTC_SEC; d->min &= ~BD70528_MASK_RTC_MINUTE; d->hour &= ~BD70528_MASK_RTC_HOUR; d->sec |= bin2bcd(t->tm_sec); d->min |= bin2bcd(t->tm_min); d->hour |= bin2bcd(t->tm_hour); } static inline void tm2rtc(struct rtc_time *t, struct bd70528_rtc_data *r) { r->day &= ~BD70528_MASK_RTC_DAY; r->week &= ~BD70528_MASK_RTC_WEEK; r->month &= ~BD70528_MASK_RTC_MONTH; /* * PM and 24H bits are not used by Wake - thus we clear them * here and not in tmday2rtc() which is also used by wake. */ r->time.hour &= ~(BD70528_MASK_RTC_HOUR_PM | BD70528_MASK_RTC_HOUR_24H); tmday2rtc(t, &r->time); /* * We do always set time in 24H mode. */ r->time.hour |= BD70528_MASK_RTC_HOUR_24H; r->day |= bin2bcd(t->tm_mday); r->week |= bin2bcd(t->tm_wday); r->month |= bin2bcd(t->tm_mon + 1); r->year = bin2bcd(t->tm_year - 100); } static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t) { t->tm_sec = bcd2bin(r->time.sec & BD70528_MASK_RTC_SEC); t->tm_min = bcd2bin(r->time.min & BD70528_MASK_RTC_MINUTE); t->tm_hour = bcd2bin(r->time.hour & BD70528_MASK_RTC_HOUR); /* * If RTC is in 12H mode, then bit BD70528_MASK_RTC_HOUR_PM * is not BCD value but tells whether it is AM or PM */ if (!(r->time.hour & BD70528_MASK_RTC_HOUR_24H)) { t->tm_hour %= 12; if (r->time.hour & BD70528_MASK_RTC_HOUR_PM) t->tm_hour += 12; } t->tm_mday = bcd2bin(r->day & BD70528_MASK_RTC_DAY); t->tm_mon = bcd2bin(r->month & BD70528_MASK_RTC_MONTH) - 1; t->tm_year = 100 + bcd2bin(r->year & BD70528_MASK_RTC_YEAR); t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK); } static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) { struct bd70528_rtc_wake wake; struct bd70528_rtc_alm alm; int ret; struct bd70528_rtc *r = dev_get_drvdata(dev); struct rohm_regmap_dev *bd70528 = r->mfd; ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_WAKE_START, &wake, sizeof(wake)); if (ret) { dev_err(dev, "Failed to read wake regs\n"); return ret; } ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, &alm, sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; } tm2rtc(&a->time, &alm.data); tmday2rtc(&a->time, &wake.time); if (a->enabled) { alm.alm_mask &= ~BD70528_MASK_ALM_EN; wake.ctrl |= BD70528_MASK_WAKE_EN; } else { alm.alm_mask |= BD70528_MASK_ALM_EN; wake.ctrl &= ~BD70528_MASK_WAKE_EN; } ret = regmap_bulk_write(bd70528->regmap, BD70528_REG_RTC_WAKE_START, &wake, sizeof(wake)); if (ret) { dev_err(dev, "Failed to set wake time\n"); return ret; } ret = regmap_bulk_write(bd70528->regmap, BD70528_REG_RTC_ALM_START, &alm, sizeof(alm)); if (ret) dev_err(dev, "Failed to set alarm time\n"); return ret; } static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a) { struct bd70528_rtc_alm alm; int ret; struct bd70528_rtc *r = dev_get_drvdata(dev); struct rohm_regmap_dev *bd70528 = r->mfd; ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, &alm, sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; } rtc2tm(&alm.data, &a->time); a->time.tm_mday = -1; a->time.tm_mon = -1; a->time.tm_year = -1; a->enabled = !(alm.alm_mask & BD70528_MASK_ALM_EN); a->pending = 0; return 0; } static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) { int ret, tmpret, old_states; struct bd70528_rtc_data rtc_data; struct bd70528_rtc *r = dev_get_drvdata(dev); struct rohm_regmap_dev *bd70528 = r->mfd; ret = bd70528_disable_rtc_based_timers(r, &old_states); if (ret) return ret; tmpret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_START, &rtc_data, sizeof(rtc_data)); if (tmpret) { dev_err(dev, "Failed to read RTC time registers\n"); goto renable_out; } tm2rtc(t, &rtc_data); tmpret = regmap_bulk_write(bd70528->regmap, BD70528_REG_RTC_START, &rtc_data, sizeof(rtc_data)); if (tmpret) { dev_err(dev, "Failed to set RTC time\n"); goto renable_out; } renable_out: ret = bd70528_re_enable_rtc_based_timers(r, old_states); if (tmpret) ret = tmpret; return ret; } static int bd70528_set_time(struct device *dev, struct rtc_time *t) { int ret; struct bd70528_rtc *r = dev_get_drvdata(dev); bd70528_wdt_lock(r->mfd); ret = bd70528_set_time_locked(dev, t); bd70528_wdt_unlock(r->mfd); return ret; } static int bd70528_get_time(struct device *dev, struct rtc_time *t) { struct bd70528_rtc *r = dev_get_drvdata(dev); struct rohm_regmap_dev *bd70528 = r->mfd; struct bd70528_rtc_data rtc_data; int ret; /* read the RTC date and time registers all at once */ ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_START, &rtc_data, sizeof(rtc_data)); if (ret) { dev_err(dev, "Failed to read RTC time (err %d)\n", ret); return ret; } rtc2tm(&rtc_data, t); return 0; } static int bd70528_alm_enable(struct device *dev, unsigned int enabled) { int ret; unsigned int enableval = BD70528_MASK_ALM_EN; struct bd70528_rtc *r = dev_get_drvdata(dev); if (enabled) enableval = 0; bd70528_wdt_lock(r->mfd); ret = bd70528_set_wake(r->mfd, enabled, NULL); if (ret) { dev_err(dev, "Failed to change wake state\n"); goto out_unlock; } ret = regmap_update_bits(r->mfd->regmap, BD70528_REG_RTC_ALM_MASK, BD70528_MASK_ALM_EN, enableval); if (ret) dev_err(dev, "Failed to change alarm state\n"); out_unlock: bd70528_wdt_unlock(r->mfd); return ret; } static const struct rtc_class_ops bd70528_rtc_ops = { .read_time = bd70528_get_time, .set_time = bd70528_set_time, .read_alarm = bd70528_read_alarm, .set_alarm = bd70528_set_alarm, .alarm_irq_enable = bd70528_alm_enable, }; static irqreturn_t alm_hndlr(int irq, void *data) { struct rtc_device *rtc = data; rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF | RTC_PF); return IRQ_HANDLED; } static int bd70528_probe(struct platform_device *pdev) { struct bd70528_rtc *bd_rtc; struct rohm_regmap_dev *mfd; int ret; struct rtc_device *rtc; int irq; unsigned int hr; mfd = dev_get_drvdata(pdev->dev.parent); if (!mfd) { dev_err(&pdev->dev, "No MFD driver data\n"); return -EINVAL; } bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); if (!bd_rtc) return -ENOMEM; bd_rtc->mfd = mfd; bd_rtc->dev = &pdev->dev; irq = platform_get_irq_byname(pdev, "bd70528-rtc-alm"); if (irq < 0) return irq; platform_set_drvdata(pdev, bd_rtc); ret = regmap_read(mfd->regmap, BD70528_REG_RTC_HOUR, &hr); if (ret) { dev_err(&pdev->dev, "Failed to reag RTC clock\n"); return ret; } if (!(hr & BD70528_MASK_RTC_HOUR_24H)) { struct rtc_time t; ret = bd70528_get_time(&pdev->dev, &t); if (!ret) ret = bd70528_set_time(&pdev->dev, &t); if (ret) { dev_err(&pdev->dev, "Setting 24H clock for RTC failed\n"); return ret; } } device_set_wakeup_capable(&pdev->dev, true); device_wakeup_enable(&pdev->dev); rtc = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(rtc)) { dev_err(&pdev->dev, "RTC device creation failed\n"); return PTR_ERR(rtc); } rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; rtc->range_max = RTC_TIMESTAMP_END_2099; rtc->ops = &bd70528_rtc_ops; /* Request alarm IRQ prior to registerig the RTC */ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr, IRQF_ONESHOT, "bd70528-rtc", rtc); if (ret) return ret; /* * BD70528 irq controller is not touching the main mask register. * So enable the RTC block interrupts at main level. We can just * leave them enabled as irq-controller should disable irqs * from sub-registers when IRQ is disabled or freed. */ ret = regmap_update_bits(mfd->regmap, BD70528_REG_INT_MAIN_MASK, BD70528_INT_RTC_MASK, 0); if (ret) { dev_err(&pdev->dev, "Failed to enable RTC interrupts\n"); return ret; } return rtc_register_device(rtc); } static struct platform_driver bd70528_rtc = { .driver = { .name = "bd70528-rtc" }, .probe = bd70528_probe, }; module_platform_driver(bd70528_rtc); MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); MODULE_DESCRIPTION("BD70528 RTC driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1