| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Bruno Thomsen | 1220 | 38.03% | 6 | 31.58% |
| Akinobu Mita | 970 | 30.24% | 3 | 15.79% |
| Renaud Cerrato | 705 | 21.98% | 1 | 5.26% |
| Uwe Kleine-König | 265 | 8.26% | 3 | 15.79% |
| Andrea Scian | 27 | 0.84% | 2 | 10.53% |
| Sean Nyekjaer | 14 | 0.44% | 1 | 5.26% |
| Xulin Sun | 5 | 0.16% | 1 | 5.26% |
| Thomas Gleixner | 1 | 0.03% | 1 | 5.26% |
| Alexandre Belloni | 1 | 0.03% | 1 | 5.26% |
| Total | 3208 | 19 |
// SPDX-License-Identifier: GPL-2.0-only /* * An I2C and SPI driver for the NXP PCF2127/29 RTC * Copyright 2013 Til-Technologies * * Author: Renaud Cerrato <r.cerrato@til-technologies.fr> * * Watchdog and tamper functions * Author: Bruno Thomsen <bruno.thomsen@gmail.com> * * based on the other drivers in this same directory. * * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf */ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/bcd.h> #include <linux/rtc.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/watchdog.h> /* Control register 1 */ #define PCF2127_REG_CTRL1 0x00 #define PCF2127_BIT_CTRL1_TSF1 BIT(4) /* Control register 2 */ #define PCF2127_REG_CTRL2 0x01 #define PCF2127_BIT_CTRL2_TSIE BIT(2) #define PCF2127_BIT_CTRL2_TSF2 BIT(5) /* Control register 3 */ #define PCF2127_REG_CTRL3 0x02 #define PCF2127_BIT_CTRL3_BLIE BIT(0) #define PCF2127_BIT_CTRL3_BIE BIT(1) #define PCF2127_BIT_CTRL3_BLF BIT(2) #define PCF2127_BIT_CTRL3_BF BIT(3) #define PCF2127_BIT_CTRL3_BTSE BIT(4) /* Time and date registers */ #define PCF2127_REG_SC 0x03 #define PCF2127_BIT_SC_OSF BIT(7) #define PCF2127_REG_MN 0x04 #define PCF2127_REG_HR 0x05 #define PCF2127_REG_DM 0x06 #define PCF2127_REG_DW 0x07 #define PCF2127_REG_MO 0x08 #define PCF2127_REG_YR 0x09 /* Watchdog registers */ #define PCF2127_REG_WD_CTL 0x10 #define PCF2127_BIT_WD_CTL_TF0 BIT(0) #define PCF2127_BIT_WD_CTL_TF1 BIT(1) #define PCF2127_BIT_WD_CTL_CD0 BIT(6) #define PCF2127_BIT_WD_CTL_CD1 BIT(7) #define PCF2127_REG_WD_VAL 0x11 /* Tamper timestamp registers */ #define PCF2127_REG_TS_CTRL 0x12 #define PCF2127_BIT_TS_CTRL_TSOFF BIT(6) #define PCF2127_BIT_TS_CTRL_TSM BIT(7) #define PCF2127_REG_TS_SC 0x13 #define PCF2127_REG_TS_MN 0x14 #define PCF2127_REG_TS_HR 0x15 #define PCF2127_REG_TS_DM 0x16 #define PCF2127_REG_TS_MO 0x17 #define PCF2127_REG_TS_YR 0x18 /* * RAM registers * PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is * battery backed and can survive a power outage. * PCF2129 doesn't have this feature. */ #define PCF2127_REG_RAM_ADDR_MSB 0x1A #define PCF2127_REG_RAM_WRT_CMD 0x1C #define PCF2127_REG_RAM_RD_CMD 0x1D /* Watchdog timer value constants */ #define PCF2127_WD_VAL_STOP 0 #define PCF2127_WD_VAL_MIN 2 #define PCF2127_WD_VAL_MAX 255 #define PCF2127_WD_VAL_DEFAULT 60 struct pcf2127 { struct rtc_device *rtc; struct watchdog_device wdd; struct regmap *regmap; }; /* * In the routines that deal directly with the pcf2127 hardware, we use * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. */ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev); unsigned char buf[10]; int ret; /* * Avoid reading CTRL2 register as it causes WD_VAL register * value to reset to 0 which means watchdog is stopped. */ ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3, (buf + PCF2127_REG_CTRL3), ARRAY_SIZE(buf) - PCF2127_REG_CTRL3); if (ret) { dev_err(dev, "%s: read error\n", __func__); return ret; } if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF) dev_info(dev, "low voltage detected, check/replace RTC battery.\n"); /* Clock integrity is not guaranteed when OSF flag is set. */ if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) { /* * no need clear the flag here, * it will be cleared once the new date is saved */ dev_warn(dev, "oscillator stop detected, date/time is not reliable\n"); return -EINVAL; } dev_dbg(dev, "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, " "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC], buf[PCF2127_REG_MN], buf[PCF2127_REG_HR], buf[PCF2127_REG_DM], buf[PCF2127_REG_DW], buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]); tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */ tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]); if (tm->tm_year < 70) tm->tm_year += 100; /* assume we are in 1970...2069 */ dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); return 0; } static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev); unsigned char buf[7]; int i = 0, err; dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); /* hours, minutes and seconds */ buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */ buf[i++] = bin2bcd(tm->tm_min); buf[i++] = bin2bcd(tm->tm_hour); buf[i++] = bin2bcd(tm->tm_mday); buf[i++] = tm->tm_wday & 0x07; /* month, 1 - 12 */ buf[i++] = bin2bcd(tm->tm_mon + 1); /* year */ buf[i++] = bin2bcd(tm->tm_year % 100); /* write register's data */ err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i); if (err) { dev_err(dev, "%s: err=%d", __func__, err); return err; } return 0; } #ifdef CONFIG_RTC_INTF_DEV static int pcf2127_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev); int touser; int ret; switch (cmd) { case RTC_VL_READ: ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &touser); if (ret) return ret; touser = touser & PCF2127_BIT_CTRL3_BLF ? 1 : 0; if (copy_to_user((void __user *)arg, &touser, sizeof(int))) return -EFAULT; return 0; default: return -ENOIOCTLCMD; } } #else #define pcf2127_rtc_ioctl NULL #endif static const struct rtc_class_ops pcf2127_rtc_ops = { .ioctl = pcf2127_rtc_ioctl, .read_time = pcf2127_rtc_read_time, .set_time = pcf2127_rtc_set_time, }; static int pcf2127_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes) { struct pcf2127 *pcf2127 = priv; int ret; unsigned char offsetbuf[] = { offset >> 8, offset }; ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB, offsetbuf, 2); if (ret) return ret; ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD, val, bytes); return ret ?: bytes; } static int pcf2127_nvmem_write(void *priv, unsigned int offset, void *val, size_t bytes) { struct pcf2127 *pcf2127 = priv; int ret; unsigned char offsetbuf[] = { offset >> 8, offset }; ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB, offsetbuf, 2); if (ret) return ret; ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD, val, bytes); return ret ?: bytes; } /* watchdog driver */ static int pcf2127_wdt_ping(struct watchdog_device *wdd) { struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd); return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, wdd->timeout); } /* * Restart watchdog timer if feature is active. * * Note: Reading CTRL2 register causes watchdog to stop which is unfortunate, * since register also contain control/status flags for other features. * Always call this function after reading CTRL2 register. */ static int pcf2127_wdt_active_ping(struct watchdog_device *wdd) { int ret = 0; if (watchdog_active(wdd)) { ret = pcf2127_wdt_ping(wdd); if (ret) dev_err(wdd->parent, "%s: watchdog restart failed, ret=%d\n", __func__, ret); } return ret; } static int pcf2127_wdt_start(struct watchdog_device *wdd) { return pcf2127_wdt_ping(wdd); } static int pcf2127_wdt_stop(struct watchdog_device *wdd) { struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd); return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, PCF2127_WD_VAL_STOP); } static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout) { dev_dbg(wdd->parent, "new watchdog timeout: %is (old: %is)\n", new_timeout, wdd->timeout); wdd->timeout = new_timeout; return pcf2127_wdt_active_ping(wdd); } static const struct watchdog_info pcf2127_wdt_info = { .identity = "NXP PCF2127/PCF2129 Watchdog", .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, }; static const struct watchdog_ops pcf2127_watchdog_ops = { .owner = THIS_MODULE, .start = pcf2127_wdt_start, .stop = pcf2127_wdt_stop, .ping = pcf2127_wdt_ping, .set_timeout = pcf2127_wdt_set_timeout, }; /* sysfs interface */ static ssize_t timestamp0_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); int ret; ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1, PCF2127_BIT_CTRL1_TSF1, 0); if (ret) { dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret); return ret; } ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, PCF2127_BIT_CTRL2_TSF2, 0); if (ret) { dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret); return ret; } ret = pcf2127_wdt_active_ping(&pcf2127->wdd); if (ret) return ret; return count; }; static ssize_t timestamp0_show(struct device *dev, struct device_attribute *attr, char *buf) { struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent); struct rtc_time tm; int ret; unsigned char data[25]; ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data, sizeof(data)); if (ret) { dev_err(dev, "%s: read error ret=%d\n", __func__, ret); return ret; } dev_dbg(dev, "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, " "ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n", __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2], data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC], data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR], data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO], data[PCF2127_REG_TS_YR]); ret = pcf2127_wdt_active_ping(&pcf2127->wdd); if (ret) return ret; if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) && !(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2)) return 0; tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F); tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F); tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F); tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F); /* TS_MO register (month) value range: 1-12 */ tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1; tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]); if (tm.tm_year < 70) tm.tm_year += 100; /* assume we are in 1970...2069 */ ret = rtc_valid_tm(&tm); if (ret) return ret; return sprintf(buf, "%llu\n", (unsigned long long)rtc_tm_to_time64(&tm)); }; static DEVICE_ATTR_RW(timestamp0); static struct attribute *pcf2127_attrs[] = { &dev_attr_timestamp0.attr, NULL }; static const struct attribute_group pcf2127_attr_group = { .attrs = pcf2127_attrs, }; static int pcf2127_probe(struct device *dev, struct regmap *regmap, const char *name, bool has_nvmem) { struct pcf2127 *pcf2127; int ret = 0; dev_dbg(dev, "%s\n", __func__); pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL); if (!pcf2127) return -ENOMEM; pcf2127->regmap = regmap; dev_set_drvdata(dev, pcf2127); pcf2127->rtc = devm_rtc_allocate_device(dev); if (IS_ERR(pcf2127->rtc)) return PTR_ERR(pcf2127->rtc); pcf2127->rtc->ops = &pcf2127_rtc_ops; pcf2127->wdd.parent = dev; pcf2127->wdd.info = &pcf2127_wdt_info; pcf2127->wdd.ops = &pcf2127_watchdog_ops; pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN; pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX; pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT; pcf2127->wdd.min_hw_heartbeat_ms = 500; watchdog_set_drvdata(&pcf2127->wdd, pcf2127); if (has_nvmem) { struct nvmem_config nvmem_cfg = { .priv = pcf2127, .reg_read = pcf2127_nvmem_read, .reg_write = pcf2127_nvmem_write, .size = 512, }; ret = rtc_nvmem_register(pcf2127->rtc, &nvmem_cfg); } /* * Watchdog timer enabled and reset pin /RST activated when timed out. * Select 1Hz clock source for watchdog timer. * Timer is not started until WD_VAL is loaded with a valid value. * Note: Countdown timer disabled and not available. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL, PCF2127_BIT_WD_CTL_CD1 | PCF2127_BIT_WD_CTL_CD0 | PCF2127_BIT_WD_CTL_TF1 | PCF2127_BIT_WD_CTL_TF0, PCF2127_BIT_WD_CTL_CD1 | PCF2127_BIT_WD_CTL_CD0 | PCF2127_BIT_WD_CTL_TF1); if (ret) { dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__); return ret; } #ifdef CONFIG_WATCHDOG ret = devm_watchdog_register_device(dev, &pcf2127->wdd); if (ret) return ret; #endif /* CONFIG_WATCHDOG */ /* * Disable battery low/switch-over timestamp and interrupts. * Clear battery interrupt flags which can block new trigger events. * Note: This is the default chip behaviour but added to ensure * correct tamper timestamp and interrupt function. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3, PCF2127_BIT_CTRL3_BTSE | PCF2127_BIT_CTRL3_BF | PCF2127_BIT_CTRL3_BIE | PCF2127_BIT_CTRL3_BLIE, 0); if (ret) { dev_err(dev, "%s: interrupt config (ctrl3) failed\n", __func__); return ret; } /* * Enable timestamp function and store timestamp of first trigger * event until TSF1 and TFS2 interrupt flags are cleared. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_TS_CTRL, PCF2127_BIT_TS_CTRL_TSOFF | PCF2127_BIT_TS_CTRL_TSM, PCF2127_BIT_TS_CTRL_TSM); if (ret) { dev_err(dev, "%s: tamper detection config (ts_ctrl) failed\n", __func__); return ret; } /* * Enable interrupt generation when TSF1 or TSF2 timestamp flags * are set. Interrupt signal is an open-drain output and can be * left floating if unused. */ ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2, PCF2127_BIT_CTRL2_TSIE, PCF2127_BIT_CTRL2_TSIE); if (ret) { dev_err(dev, "%s: tamper detection config (ctrl2) failed\n", __func__); return ret; } ret = rtc_add_group(pcf2127->rtc, &pcf2127_attr_group); if (ret) { dev_err(dev, "%s: tamper sysfs registering failed\n", __func__); return ret; } return rtc_register_device(pcf2127->rtc); } #ifdef CONFIG_OF static const struct of_device_id pcf2127_of_match[] = { { .compatible = "nxp,pcf2127" }, { .compatible = "nxp,pcf2129" }, {} }; MODULE_DEVICE_TABLE(of, pcf2127_of_match); #endif #if IS_ENABLED(CONFIG_I2C) static int pcf2127_i2c_write(void *context, const void *data, size_t count) { struct device *dev = context; struct i2c_client *client = to_i2c_client(dev); int ret; ret = i2c_master_send(client, data, count); if (ret != count) return ret < 0 ? ret : -EIO; return 0; } static int pcf2127_i2c_gather_write(void *context, const void *reg, size_t reg_size, const void *val, size_t val_size) { struct device *dev = context; struct i2c_client *client = to_i2c_client(dev); int ret; void *buf; if (WARN_ON(reg_size != 1)) return -EINVAL; buf = kmalloc(val_size + 1, GFP_KERNEL); if (!buf) return -ENOMEM; memcpy(buf, reg, 1); memcpy(buf + 1, val, val_size); ret = i2c_master_send(client, buf, val_size + 1); kfree(buf); if (ret != val_size + 1) return ret < 0 ? ret : -EIO; return 0; } static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size, void *val, size_t val_size) { struct device *dev = context; struct i2c_client *client = to_i2c_client(dev); int ret; if (WARN_ON(reg_size != 1)) return -EINVAL; ret = i2c_master_send(client, reg, 1); if (ret != 1) return ret < 0 ? ret : -EIO; ret = i2c_master_recv(client, val, val_size); if (ret != val_size) return ret < 0 ? ret : -EIO; return 0; } /* * The reason we need this custom regmap_bus instead of using regmap_init_i2c() * is that the STOP condition is required between set register address and * read register data when reading from registers. */ static const struct regmap_bus pcf2127_i2c_regmap = { .write = pcf2127_i2c_write, .gather_write = pcf2127_i2c_gather_write, .read = pcf2127_i2c_read, }; static struct i2c_driver pcf2127_i2c_driver; static int pcf2127_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct regmap *regmap; static const struct regmap_config config = { .reg_bits = 8, .val_bits = 8, }; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) return -ENODEV; regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap, &client->dev, &config); if (IS_ERR(regmap)) { dev_err(&client->dev, "%s: regmap allocation failed: %ld\n", __func__, PTR_ERR(regmap)); return PTR_ERR(regmap); } return pcf2127_probe(&client->dev, regmap, pcf2127_i2c_driver.driver.name, id->driver_data); } static const struct i2c_device_id pcf2127_i2c_id[] = { { "pcf2127", 1 }, { "pcf2129", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id); static struct i2c_driver pcf2127_i2c_driver = { .driver = { .name = "rtc-pcf2127-i2c", .of_match_table = of_match_ptr(pcf2127_of_match), }, .probe = pcf2127_i2c_probe, .id_table = pcf2127_i2c_id, }; static int pcf2127_i2c_register_driver(void) { return i2c_add_driver(&pcf2127_i2c_driver); } static void pcf2127_i2c_unregister_driver(void) { i2c_del_driver(&pcf2127_i2c_driver); } #else static int pcf2127_i2c_register_driver(void) { return 0; } static void pcf2127_i2c_unregister_driver(void) { } #endif #if IS_ENABLED(CONFIG_SPI_MASTER) static struct spi_driver pcf2127_spi_driver; static int pcf2127_spi_probe(struct spi_device *spi) { static const struct regmap_config config = { .reg_bits = 8, .val_bits = 8, .read_flag_mask = 0xa0, .write_flag_mask = 0x20, }; struct regmap *regmap; regmap = devm_regmap_init_spi(spi, &config); if (IS_ERR(regmap)) { dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n", __func__, PTR_ERR(regmap)); return PTR_ERR(regmap); } return pcf2127_probe(&spi->dev, regmap, pcf2127_spi_driver.driver.name, spi_get_device_id(spi)->driver_data); } static const struct spi_device_id pcf2127_spi_id[] = { { "pcf2127", 1 }, { "pcf2129", 0 }, { } }; MODULE_DEVICE_TABLE(spi, pcf2127_spi_id); static struct spi_driver pcf2127_spi_driver = { .driver = { .name = "rtc-pcf2127-spi", .of_match_table = of_match_ptr(pcf2127_of_match), }, .probe = pcf2127_spi_probe, .id_table = pcf2127_spi_id, }; static int pcf2127_spi_register_driver(void) { return spi_register_driver(&pcf2127_spi_driver); } static void pcf2127_spi_unregister_driver(void) { spi_unregister_driver(&pcf2127_spi_driver); } #else static int pcf2127_spi_register_driver(void) { return 0; } static void pcf2127_spi_unregister_driver(void) { } #endif static int __init pcf2127_init(void) { int ret; ret = pcf2127_i2c_register_driver(); if (ret) { pr_err("Failed to register pcf2127 i2c driver: %d\n", ret); return ret; } ret = pcf2127_spi_register_driver(); if (ret) { pr_err("Failed to register pcf2127 spi driver: %d\n", ret); pcf2127_i2c_unregister_driver(); } return ret; } module_init(pcf2127_init) static void __exit pcf2127_exit(void) { pcf2127_spi_unregister_driver(); pcf2127_i2c_unregister_driver(); } module_exit(pcf2127_exit) MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>"); MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1