Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Heikki Krogerus | 4446 | 98.65% | 7 | 63.64% |
Ajay Gupta | 59 | 1.31% | 2 | 18.18% |
Greg Kroah-Hartman | 2 | 0.04% | 2 | 18.18% |
Total | 4507 | 11 |
// SPDX-License-Identifier: GPL-2.0 /* * USB Type-C Connector System Software Interface driver * * Copyright (C) 2017, Intel Corporation * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> */ #include <linux/completion.h> #include <linux/property.h> #include <linux/device.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/usb/typec_dp.h> #include "ucsi.h" #include "trace.h" #define to_ucsi_connector(_cap_) container_of(_cap_, struct ucsi_connector, \ typec_cap) /* * UCSI_TIMEOUT_MS - PPM communication timeout * * Ideally we could use MIN_TIME_TO_RESPOND_WITH_BUSY (which is defined in UCSI * specification) here as reference, but unfortunately we can't. It is very * difficult to estimate the time it takes for the system to process the command * before it is actually passed to the PPM. */ #define UCSI_TIMEOUT_MS 5000 /* * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests * * 5 seconds is close to the time it takes for CapsCounter to reach 0, so even * if the PPM does not generate Connector Change events before that with * partners that do not support USB Power Delivery, this should still work. */ #define UCSI_SWAP_TIMEOUT_MS 5000 static inline int ucsi_sync(struct ucsi *ucsi) { if (ucsi->ppm && ucsi->ppm->sync) return ucsi->ppm->sync(ucsi->ppm); return 0; } static int ucsi_command(struct ucsi *ucsi, struct ucsi_control *ctrl) { int ret; trace_ucsi_command(ctrl); set_bit(COMMAND_PENDING, &ucsi->flags); ret = ucsi->ppm->cmd(ucsi->ppm, ctrl); if (ret) goto err_clear_flag; if (!wait_for_completion_timeout(&ucsi->complete, msecs_to_jiffies(UCSI_TIMEOUT_MS))) { dev_warn(ucsi->dev, "PPM NOT RESPONDING\n"); ret = -ETIMEDOUT; } err_clear_flag: clear_bit(COMMAND_PENDING, &ucsi->flags); return ret; } static int ucsi_ack(struct ucsi *ucsi, u8 ack) { struct ucsi_control ctrl; int ret; trace_ucsi_ack(ack); set_bit(ACK_PENDING, &ucsi->flags); UCSI_CMD_ACK(ctrl, ack); ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl); if (ret) goto out_clear_bit; /* Waiting for ACK with ACK CMD, but not with EVENT for now */ if (ack == UCSI_ACK_EVENT) goto out_clear_bit; if (!wait_for_completion_timeout(&ucsi->complete, msecs_to_jiffies(UCSI_TIMEOUT_MS))) ret = -ETIMEDOUT; out_clear_bit: clear_bit(ACK_PENDING, &ucsi->flags); if (ret) dev_err(ucsi->dev, "%s: failed\n", __func__); return ret; } static int ucsi_run_command(struct ucsi *ucsi, struct ucsi_control *ctrl, void *data, size_t size) { struct ucsi_control _ctrl; u8 data_length; u16 error; int ret; ret = ucsi_command(ucsi, ctrl); if (ret) goto err; switch (ucsi->status) { case UCSI_IDLE: ret = ucsi_sync(ucsi); if (ret) dev_warn(ucsi->dev, "%s: sync failed\n", __func__); if (data) memcpy(data, ucsi->ppm->data->message_in, size); data_length = ucsi->ppm->data->cci.data_length; ret = ucsi_ack(ucsi, UCSI_ACK_CMD); if (!ret) ret = data_length; break; case UCSI_BUSY: /* The caller decides whether to cancel or not */ ret = -EBUSY; break; case UCSI_ERROR: ret = ucsi_ack(ucsi, UCSI_ACK_CMD); if (ret) break; _ctrl.raw_cmd = 0; _ctrl.cmd.cmd = UCSI_GET_ERROR_STATUS; ret = ucsi_command(ucsi, &_ctrl); if (ret) { dev_err(ucsi->dev, "reading error failed!\n"); break; } memcpy(&error, ucsi->ppm->data->message_in, sizeof(error)); /* Something has really gone wrong */ if (WARN_ON(ucsi->status == UCSI_ERROR)) { ret = -ENODEV; break; } ret = ucsi_ack(ucsi, UCSI_ACK_CMD); if (ret) break; switch (error) { case UCSI_ERROR_INCOMPATIBLE_PARTNER: ret = -EOPNOTSUPP; break; case UCSI_ERROR_CC_COMMUNICATION_ERR: ret = -ECOMM; break; case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL: ret = -EPROTO; break; case UCSI_ERROR_DEAD_BATTERY: dev_warn(ucsi->dev, "Dead battery condition!\n"); ret = -EPERM; break; /* The following mean a bug in this driver */ case UCSI_ERROR_INVALID_CON_NUM: case UCSI_ERROR_UNREGONIZED_CMD: case UCSI_ERROR_INVALID_CMD_ARGUMENT: dev_warn(ucsi->dev, "%s: possible UCSI driver bug - error 0x%x\n", __func__, error); ret = -EINVAL; break; default: dev_warn(ucsi->dev, "%s: error without status\n", __func__); ret = -EIO; break; } break; } err: trace_ucsi_run_command(ctrl, ret); return ret; } int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl, void *retval, size_t size) { int ret; mutex_lock(&ucsi->ppm_lock); ret = ucsi_run_command(ucsi, ctrl, retval, size); mutex_unlock(&ucsi->ppm_lock); return ret; } EXPORT_SYMBOL_GPL(ucsi_send_command); int ucsi_resume(struct ucsi *ucsi) { struct ucsi_control ctrl; /* Restore UCSI notification enable mask after system resume */ UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_ALL); return ucsi_send_command(ucsi, &ctrl, NULL, 0); } EXPORT_SYMBOL_GPL(ucsi_resume); /* -------------------------------------------------------------------------- */ void ucsi_altmode_update_active(struct ucsi_connector *con) { const struct typec_altmode *altmode = NULL; struct ucsi_control ctrl; int ret; u8 cur; int i; UCSI_CMD_GET_CURRENT_CAM(ctrl, con->num); ret = ucsi_run_command(con->ucsi, &ctrl, &cur, sizeof(cur)); if (ret < 0) { if (con->ucsi->ppm->data->version > 0x0100) { dev_err(con->ucsi->dev, "GET_CURRENT_CAM command failed\n"); return; } cur = 0xff; } if (cur < UCSI_MAX_ALTMODES) altmode = typec_altmode_get_partner(con->port_altmode[cur]); for (i = 0; con->partner_altmode[i]; i++) typec_altmode_update_active(con->partner_altmode[i], con->partner_altmode[i] == altmode); } static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid) { u8 mode = 1; int i; for (i = 0; alt[i]; i++) if (alt[i]->svid == svid) mode++; return mode; } static int ucsi_next_altmode(struct typec_altmode **alt) { int i = 0; for (i = 0; i < UCSI_MAX_ALTMODES; i++) if (!alt[i]) return i; return -ENOENT; } static int ucsi_register_altmode(struct ucsi_connector *con, struct typec_altmode_desc *desc, u8 recipient) { struct typec_altmode *alt; bool override; int ret; int i; override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE); switch (recipient) { case UCSI_RECIPIENT_CON: i = ucsi_next_altmode(con->port_altmode); if (i < 0) { ret = i; goto err; } desc->mode = ucsi_altmode_next_mode(con->port_altmode, desc->svid); switch (desc->svid) { case USB_TYPEC_DP_SID: case USB_TYPEC_NVIDIA_VLINK_SID: alt = ucsi_register_displayport(con, override, i, desc); break; default: alt = typec_port_register_altmode(con->port, desc); break; } if (IS_ERR(alt)) { ret = PTR_ERR(alt); goto err; } con->port_altmode[i] = alt; break; case UCSI_RECIPIENT_SOP: i = ucsi_next_altmode(con->partner_altmode); if (i < 0) { ret = i; goto err; } desc->mode = ucsi_altmode_next_mode(con->partner_altmode, desc->svid); alt = typec_partner_register_altmode(con->partner, desc); if (IS_ERR(alt)) { ret = PTR_ERR(alt); goto err; } con->partner_altmode[i] = alt; break; default: return -EINVAL; } trace_ucsi_register_altmode(recipient, alt); return 0; err: dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n", desc->svid, desc->mode); return ret; } static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) { int max_altmodes = UCSI_MAX_ALTMODES; struct typec_altmode_desc desc; struct ucsi_altmode alt[2]; struct ucsi_control ctrl; int num = 1; int ret; int len; int j; int i; if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS)) return 0; if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0]) return 0; if (recipient == UCSI_RECIPIENT_CON) max_altmodes = con->ucsi->cap.num_alt_modes; for (i = 0; i < max_altmodes;) { memset(alt, 0, sizeof(alt)); UCSI_CMD_GET_ALTERNATE_MODES(ctrl, recipient, con->num, i, 1); len = ucsi_run_command(con->ucsi, &ctrl, alt, sizeof(alt)); if (len <= 0) return len; /* * This code is requesting one alt mode at a time, but some PPMs * may still return two. If that happens both alt modes need be * registered and the offset for the next alt mode has to be * incremented. */ num = len / sizeof(alt[0]); i += num; for (j = 0; j < num; j++) { if (!alt[j].svid) return 0; memset(&desc, 0, sizeof(desc)); desc.vdo = alt[j].mid; desc.svid = alt[j].svid; desc.roles = TYPEC_PORT_DRD; ret = ucsi_register_altmode(con, &desc, recipient); if (ret) return ret; } } return 0; } static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient) { const struct typec_altmode *pdev; struct typec_altmode **adev; int i = 0; switch (recipient) { case UCSI_RECIPIENT_CON: adev = con->port_altmode; break; case UCSI_RECIPIENT_SOP: adev = con->partner_altmode; break; default: return; } while (adev[i]) { if (recipient == UCSI_RECIPIENT_SOP && (adev[i]->svid == USB_TYPEC_DP_SID || adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID)) { pdev = typec_altmode_get_partner(adev[i]); ucsi_displayport_remove_partner((void *)pdev); } typec_unregister_altmode(adev[i]); adev[i++] = NULL; } } static void ucsi_pwr_opmode_change(struct ucsi_connector *con) { switch (con->status.pwr_op_mode) { case UCSI_CONSTAT_PWR_OPMODE_PD: typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD); break; case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5: typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A); break; case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0: typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A); break; default: typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB); break; } } static int ucsi_register_partner(struct ucsi_connector *con) { struct typec_partner_desc desc; struct typec_partner *partner; if (con->partner) return 0; memset(&desc, 0, sizeof(desc)); switch (con->status.partner_type) { case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: desc.accessory = TYPEC_ACCESSORY_DEBUG; break; case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: desc.accessory = TYPEC_ACCESSORY_AUDIO; break; default: break; } desc.usb_pd = con->status.pwr_op_mode == UCSI_CONSTAT_PWR_OPMODE_PD; partner = typec_register_partner(con->port, &desc); if (IS_ERR(partner)) { dev_err(con->ucsi->dev, "con%d: failed to register partner (%ld)\n", con->num, PTR_ERR(partner)); return PTR_ERR(partner); } con->partner = partner; return 0; } static void ucsi_unregister_partner(struct ucsi_connector *con) { if (!con->partner) return; ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP); typec_unregister_partner(con->partner); con->partner = NULL; } static void ucsi_partner_change(struct ucsi_connector *con) { int ret; if (!con->partner) return; switch (con->status.partner_type) { case UCSI_CONSTAT_PARTNER_TYPE_UFP: typec_set_data_role(con->port, TYPEC_HOST); break; case UCSI_CONSTAT_PARTNER_TYPE_DFP: typec_set_data_role(con->port, TYPEC_DEVICE); break; default: break; } /* Complete pending data role swap */ if (!completion_done(&con->complete)) complete(&con->complete); /* Can't rely on Partner Flags field. Always checking the alt modes. */ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP); if (ret) dev_err(con->ucsi->dev, "con%d: failed to register partner alternate modes\n", con->num); else ucsi_altmode_update_active(con); } static void ucsi_connector_change(struct work_struct *work) { struct ucsi_connector *con = container_of(work, struct ucsi_connector, work); struct ucsi *ucsi = con->ucsi; struct ucsi_control ctrl; int ret; mutex_lock(&con->lock); UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num); ret = ucsi_send_command(ucsi, &ctrl, &con->status, sizeof(con->status)); if (ret < 0) { dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n", __func__, ret); goto out_unlock; } if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE) ucsi_pwr_opmode_change(con); if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) { typec_set_pwr_role(con->port, con->status.pwr_dir); /* Complete pending power role swap */ if (!completion_done(&con->complete)) complete(&con->complete); } if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) { typec_set_pwr_role(con->port, con->status.pwr_dir); switch (con->status.partner_type) { case UCSI_CONSTAT_PARTNER_TYPE_UFP: typec_set_data_role(con->port, TYPEC_HOST); break; case UCSI_CONSTAT_PARTNER_TYPE_DFP: typec_set_data_role(con->port, TYPEC_DEVICE); break; default: break; } if (con->status.connected) ucsi_register_partner(con); else ucsi_unregister_partner(con); } if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) { /* * We don't need to know the currently supported alt modes here. * Running GET_CAM_SUPPORTED command just to make sure the PPM * does not get stuck in case it assumes we do so. */ UCSI_CMD_GET_CAM_SUPPORTED(ctrl, con->num); ucsi_run_command(con->ucsi, &ctrl, NULL, 0); } if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) ucsi_partner_change(con); ret = ucsi_ack(ucsi, UCSI_ACK_EVENT); if (ret) dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret); trace_ucsi_connector_change(con->num, &con->status); out_unlock: clear_bit(EVENT_PENDING, &ucsi->flags); mutex_unlock(&con->lock); } /** * ucsi_notify - PPM notification handler * @ucsi: Source UCSI Interface for the notifications * * Handle notifications from PPM of @ucsi. */ void ucsi_notify(struct ucsi *ucsi) { struct ucsi_cci *cci; /* There is no requirement to sync here, but no harm either. */ ucsi_sync(ucsi); cci = &ucsi->ppm->data->cci; if (cci->error) ucsi->status = UCSI_ERROR; else if (cci->busy) ucsi->status = UCSI_BUSY; else ucsi->status = UCSI_IDLE; if (cci->cmd_complete && test_bit(COMMAND_PENDING, &ucsi->flags)) { complete(&ucsi->complete); } else if (cci->ack_complete && test_bit(ACK_PENDING, &ucsi->flags)) { complete(&ucsi->complete); } else if (cci->connector_change) { struct ucsi_connector *con; con = &ucsi->connector[cci->connector_change - 1]; if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags)) schedule_work(&con->work); } trace_ucsi_notify(ucsi->ppm->data->raw_cci); } EXPORT_SYMBOL_GPL(ucsi_notify); /* -------------------------------------------------------------------------- */ static int ucsi_reset_connector(struct ucsi_connector *con, bool hard) { struct ucsi_control ctrl; UCSI_CMD_CONNECTOR_RESET(ctrl, con, hard); return ucsi_send_command(con->ucsi, &ctrl, NULL, 0); } static int ucsi_reset_ppm(struct ucsi *ucsi) { struct ucsi_control ctrl; unsigned long tmo; int ret; ctrl.raw_cmd = 0; ctrl.cmd.cmd = UCSI_PPM_RESET; trace_ucsi_command(&ctrl); ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl); if (ret) goto err; tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); do { /* Here sync is critical. */ ret = ucsi_sync(ucsi); if (ret) goto err; if (ucsi->ppm->data->cci.reset_complete) break; /* If the PPM is still doing something else, reset it again. */ if (ucsi->ppm->data->raw_cci) { dev_warn_ratelimited(ucsi->dev, "Failed to reset PPM! Trying again..\n"); trace_ucsi_command(&ctrl); ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl); if (ret) goto err; } /* Letting the PPM settle down. */ msleep(20); ret = -ETIMEDOUT; } while (time_is_after_jiffies(tmo)); err: trace_ucsi_reset_ppm(&ctrl, ret); return ret; } static int ucsi_role_cmd(struct ucsi_connector *con, struct ucsi_control *ctrl) { int ret; ret = ucsi_send_command(con->ucsi, ctrl, NULL, 0); if (ret == -ETIMEDOUT) { struct ucsi_control c; /* PPM most likely stopped responding. Resetting everything. */ mutex_lock(&con->ucsi->ppm_lock); ucsi_reset_ppm(con->ucsi); mutex_unlock(&con->ucsi->ppm_lock); UCSI_CMD_SET_NTFY_ENABLE(c, UCSI_ENABLE_NTFY_ALL); ucsi_send_command(con->ucsi, &c, NULL, 0); ucsi_reset_connector(con, true); } return ret; } static int ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role) { struct ucsi_connector *con = to_ucsi_connector(cap); struct ucsi_control ctrl; int ret = 0; mutex_lock(&con->lock); if (!con->partner) { ret = -ENOTCONN; goto out_unlock; } if ((con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP && role == TYPEC_DEVICE) || (con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_UFP && role == TYPEC_HOST)) goto out_unlock; UCSI_CMD_SET_UOR(ctrl, con, role); ret = ucsi_role_cmd(con, &ctrl); if (ret < 0) goto out_unlock; if (!wait_for_completion_timeout(&con->complete, msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) ret = -ETIMEDOUT; out_unlock: mutex_unlock(&con->lock); return ret < 0 ? ret : 0; } static int ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role) { struct ucsi_connector *con = to_ucsi_connector(cap); struct ucsi_control ctrl; int ret = 0; mutex_lock(&con->lock); if (!con->partner) { ret = -ENOTCONN; goto out_unlock; } if (con->status.pwr_dir == role) goto out_unlock; UCSI_CMD_SET_PDR(ctrl, con, role); ret = ucsi_role_cmd(con, &ctrl); if (ret < 0) goto out_unlock; if (!wait_for_completion_timeout(&con->complete, msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) { ret = -ETIMEDOUT; goto out_unlock; } /* Something has gone wrong while swapping the role */ if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) { ucsi_reset_connector(con, true); ret = -EPROTO; } out_unlock: mutex_unlock(&con->lock); return ret; } static struct fwnode_handle *ucsi_find_fwnode(struct ucsi_connector *con) { struct fwnode_handle *fwnode; int i = 1; device_for_each_child_node(con->ucsi->dev, fwnode) if (i++ == con->num) return fwnode; return NULL; } static int ucsi_register_port(struct ucsi *ucsi, int index) { struct ucsi_connector *con = &ucsi->connector[index]; struct typec_capability *cap = &con->typec_cap; enum typec_accessory *accessory = cap->accessory; struct ucsi_control ctrl; int ret; INIT_WORK(&con->work, ucsi_connector_change); init_completion(&con->complete); mutex_init(&con->lock); con->num = index + 1; con->ucsi = ucsi; /* Get connector capability */ UCSI_CMD_GET_CONNECTOR_CAPABILITY(ctrl, con->num); ret = ucsi_run_command(ucsi, &ctrl, &con->cap, sizeof(con->cap)); if (ret < 0) return ret; if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP) cap->data = TYPEC_PORT_DRD; else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DFP) cap->data = TYPEC_PORT_DFP; else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_UFP) cap->data = TYPEC_PORT_UFP; if (con->cap.provider && con->cap.consumer) cap->type = TYPEC_PORT_DRP; else if (con->cap.provider) cap->type = TYPEC_PORT_SRC; else if (con->cap.consumer) cap->type = TYPEC_PORT_SNK; cap->revision = ucsi->cap.typec_version; cap->pd_revision = ucsi->cap.pd_version; cap->prefer_role = TYPEC_NO_PREFERRED_ROLE; if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY) *accessory++ = TYPEC_ACCESSORY_AUDIO; if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY) *accessory = TYPEC_ACCESSORY_DEBUG; cap->fwnode = ucsi_find_fwnode(con); cap->dr_set = ucsi_dr_swap; cap->pr_set = ucsi_pr_swap; /* Register the connector */ con->port = typec_register_port(ucsi->dev, cap); if (IS_ERR(con->port)) return PTR_ERR(con->port); /* Alternate modes */ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON); if (ret) dev_err(ucsi->dev, "con%d: failed to register alt modes\n", con->num); /* Get the status */ UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num); ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status)); if (ret < 0) { dev_err(ucsi->dev, "con%d: failed to get status\n", con->num); return 0; } ucsi_pwr_opmode_change(con); typec_set_pwr_role(con->port, con->status.pwr_dir); switch (con->status.partner_type) { case UCSI_CONSTAT_PARTNER_TYPE_UFP: typec_set_data_role(con->port, TYPEC_HOST); break; case UCSI_CONSTAT_PARTNER_TYPE_DFP: typec_set_data_role(con->port, TYPEC_DEVICE); break; default: break; } /* Check if there is already something connected */ if (con->status.connected) ucsi_register_partner(con); if (con->partner) { ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP); if (ret) dev_err(ucsi->dev, "con%d: failed to register alternate modes\n", con->num); else ucsi_altmode_update_active(con); } trace_ucsi_register_port(con->num, &con->status); return 0; } static void ucsi_init(struct work_struct *work) { struct ucsi *ucsi = container_of(work, struct ucsi, work); struct ucsi_connector *con; struct ucsi_control ctrl; int ret; int i; mutex_lock(&ucsi->ppm_lock); /* Reset the PPM */ ret = ucsi_reset_ppm(ucsi); if (ret) { dev_err(ucsi->dev, "failed to reset PPM!\n"); goto err; } /* Enable basic notifications */ UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR); ret = ucsi_run_command(ucsi, &ctrl, NULL, 0); if (ret < 0) goto err_reset; /* Get PPM capabilities */ UCSI_CMD_GET_CAPABILITY(ctrl); ret = ucsi_run_command(ucsi, &ctrl, &ucsi->cap, sizeof(ucsi->cap)); if (ret < 0) goto err_reset; if (!ucsi->cap.num_connectors) { ret = -ENODEV; goto err_reset; } /* Allocate the connectors. Released in ucsi_unregister_ppm() */ ucsi->connector = kcalloc(ucsi->cap.num_connectors + 1, sizeof(*ucsi->connector), GFP_KERNEL); if (!ucsi->connector) { ret = -ENOMEM; goto err_reset; } /* Register all connectors */ for (i = 0; i < ucsi->cap.num_connectors; i++) { ret = ucsi_register_port(ucsi, i); if (ret) goto err_unregister; } /* Enable all notifications */ UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_ALL); ret = ucsi_run_command(ucsi, &ctrl, NULL, 0); if (ret < 0) goto err_unregister; mutex_unlock(&ucsi->ppm_lock); return; err_unregister: for (con = ucsi->connector; con->port; con++) { ucsi_unregister_partner(con); ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON); typec_unregister_port(con->port); con->port = NULL; } err_reset: ucsi_reset_ppm(ucsi); err: mutex_unlock(&ucsi->ppm_lock); dev_err(ucsi->dev, "PPM init failed (%d)\n", ret); } /** * ucsi_register_ppm - Register UCSI PPM Interface * @dev: Device interface to the PPM * @ppm: The PPM interface * * Allocates UCSI instance, associates it with @ppm and returns it to the * caller, and schedules initialization of the interface. */ struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm) { struct ucsi *ucsi; ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL); if (!ucsi) return ERR_PTR(-ENOMEM); INIT_WORK(&ucsi->work, ucsi_init); init_completion(&ucsi->complete); mutex_init(&ucsi->ppm_lock); ucsi->dev = dev; ucsi->ppm = ppm; /* * Communication with the PPM takes a lot of time. It is not reasonable * to initialize the driver here. Using a work for now. */ queue_work(system_long_wq, &ucsi->work); return ucsi; } EXPORT_SYMBOL_GPL(ucsi_register_ppm); /** * ucsi_unregister_ppm - Unregister UCSI PPM Interface * @ucsi: struct ucsi associated with the PPM * * Unregister UCSI PPM that was created with ucsi_register(). */ void ucsi_unregister_ppm(struct ucsi *ucsi) { struct ucsi_control ctrl; int i; /* Make sure that we are not in the middle of driver initialization */ cancel_work_sync(&ucsi->work); /* Disable everything except command complete notification */ UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE) ucsi_send_command(ucsi, &ctrl, NULL, 0); for (i = 0; i < ucsi->cap.num_connectors; i++) { cancel_work_sync(&ucsi->connector[i].work); ucsi_unregister_partner(&ucsi->connector[i]); ucsi_unregister_altmodes(&ucsi->connector[i], UCSI_RECIPIENT_CON); typec_unregister_port(ucsi->connector[i].port); } ucsi_reset_ppm(ucsi); kfree(ucsi->connector); kfree(ucsi); } EXPORT_SYMBOL_GPL(ucsi_unregister_ppm); MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("USB Type-C Connector System Software Interface driver");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1