Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Christophe Ricard | 1109 | 93.82% | 7 | 63.64% |
Andy Shevchenko | 70 | 5.92% | 2 | 18.18% |
Thomas Gleixner | 2 | 0.17% | 1 | 9.09% |
Jarkko Sakkinen | 1 | 0.08% | 1 | 9.09% |
Total | 1182 | 11 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 * Copyright (C) 2009 - 2016 STMicroelectronics */ #include <linux/module.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/acpi.h> #include <linux/tpm.h> #include <linux/platform_data/st33zp24.h> #include "../tpm.h" #include "st33zp24.h" #define TPM_DUMMY_BYTE 0xAA struct st33zp24_i2c_phy { struct i2c_client *client; u8 buf[ST33ZP24_BUFSIZE + 1]; int io_lpcpd; }; /* * write8_reg * Send byte to the TIS register according to the ST33ZP24 I2C protocol. * @param: tpm_register, the tpm tis register where the data should be written * @param: tpm_data, the tpm_data to write inside the tpm_register * @param: tpm_size, The length of the data * @return: Returns negative errno, or else the number of bytes written. */ static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) { struct st33zp24_i2c_phy *phy = phy_id; phy->buf[0] = tpm_register; memcpy(phy->buf + 1, tpm_data, tpm_size); return i2c_master_send(phy->client, phy->buf, tpm_size + 1); } /* write8_reg() */ /* * read8_reg * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. * @param: tpm_register, the tpm tis register where the data should be read * @param: tpm_data, the TPM response * @param: tpm_size, tpm TPM response size to read. * @return: number of byte read successfully: should be one if success. */ static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) { struct st33zp24_i2c_phy *phy = phy_id; u8 status = 0; u8 data; data = TPM_DUMMY_BYTE; status = write8_reg(phy, tpm_register, &data, 1); if (status == 2) status = i2c_master_recv(phy->client, tpm_data, tpm_size); return status; } /* read8_reg() */ /* * st33zp24_i2c_send * Send byte to the TIS register according to the ST33ZP24 I2C protocol. * @param: phy_id, the phy description * @param: tpm_register, the tpm tis register where the data should be written * @param: tpm_data, the tpm_data to write inside the tpm_register * @param: tpm_size, the length of the data * @return: number of byte written successfully: should be one if success. */ static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) { return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data, tpm_size); } /* * st33zp24_i2c_recv * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. * @param: phy_id, the phy description * @param: tpm_register, the tpm tis register where the data should be read * @param: tpm_data, the TPM response * @param: tpm_size, tpm TPM response size to read. * @return: number of byte read successfully: should be one if success. */ static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) { return read8_reg(phy_id, tpm_register, tpm_data, tpm_size); } static const struct st33zp24_phy_ops i2c_phy_ops = { .send = st33zp24_i2c_send, .recv = st33zp24_i2c_recv, }; static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { { "lpcpd-gpios", &lpcpd_gpios, 1 }, {}, }; static int st33zp24_i2c_acpi_request_resources(struct i2c_client *client) { struct tpm_chip *chip = i2c_get_clientdata(client); struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; struct gpio_desc *gpiod_lpcpd; struct device *dev = &client->dev; int ret; ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); if (ret) return ret; /* Get LPCPD GPIO from ACPI */ gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH); if (IS_ERR(gpiod_lpcpd)) { dev_err(&client->dev, "Failed to retrieve lpcpd-gpios from acpi.\n"); phy->io_lpcpd = -1; /* * lpcpd pin is not specified. This is not an issue as * power management can be also managed by TPM specific * commands. So leave with a success status code. */ return 0; } phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd); return 0; } static int st33zp24_i2c_of_request_resources(struct i2c_client *client) { struct tpm_chip *chip = i2c_get_clientdata(client); struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; struct device_node *pp; int gpio; int ret; pp = client->dev.of_node; if (!pp) { dev_err(&client->dev, "No platform data\n"); return -ENODEV; } /* Get GPIO from device tree */ gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); if (gpio < 0) { dev_err(&client->dev, "Failed to retrieve lpcpd-gpios from dts.\n"); phy->io_lpcpd = -1; /* * lpcpd pin is not specified. This is not an issue as * power management can be also managed by TPM specific * commands. So leave with a success status code. */ return 0; } /* GPIO request and configuration */ ret = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); if (ret) { dev_err(&client->dev, "Failed to request lpcpd pin\n"); return -ENODEV; } phy->io_lpcpd = gpio; return 0; } static int st33zp24_i2c_request_resources(struct i2c_client *client) { struct tpm_chip *chip = i2c_get_clientdata(client); struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; struct st33zp24_platform_data *pdata; int ret; pdata = client->dev.platform_data; if (!pdata) { dev_err(&client->dev, "No platform data\n"); return -ENODEV; } /* store for late use */ phy->io_lpcpd = pdata->io_lpcpd; if (gpio_is_valid(pdata->io_lpcpd)) { ret = devm_gpio_request_one(&client->dev, pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, "TPM IO_LPCPD"); if (ret) { dev_err(&client->dev, "Failed to request lpcpd pin\n"); return ret; } } return 0; } /* * st33zp24_i2c_probe initialize the TPM device * @param: client, the i2c_client drescription (TPM I2C description). * @param: id, the i2c_device_id struct. * @return: 0 in case of success. * -1 in other case. */ static int st33zp24_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { int ret; struct st33zp24_platform_data *pdata; struct st33zp24_i2c_phy *phy; if (!client) { pr_info("%s: i2c client is NULL. Device not accessible.\n", __func__); return -ENODEV; } if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_info(&client->dev, "client not i2c capable\n"); return -ENODEV; } phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->client = client; pdata = client->dev.platform_data; if (!pdata && client->dev.of_node) { ret = st33zp24_i2c_of_request_resources(client); if (ret) return ret; } else if (pdata) { ret = st33zp24_i2c_request_resources(client); if (ret) return ret; } else if (ACPI_HANDLE(&client->dev)) { ret = st33zp24_i2c_acpi_request_resources(client); if (ret) return ret; } return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq, phy->io_lpcpd); } /* * st33zp24_i2c_remove remove the TPM device * @param: client, the i2c_client description (TPM I2C description). * @return: 0 in case of success. */ static int st33zp24_i2c_remove(struct i2c_client *client) { struct tpm_chip *chip = i2c_get_clientdata(client); int ret; ret = st33zp24_remove(chip); if (ret) return ret; return 0; } static const struct i2c_device_id st33zp24_i2c_id[] = { {TPM_ST33_I2C, 0}, {} }; MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id); static const struct of_device_id of_st33zp24_i2c_match[] = { { .compatible = "st,st33zp24-i2c", }, {} }; MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match); static const struct acpi_device_id st33zp24_i2c_acpi_match[] = { {"SMO3324"}, {} }; MODULE_DEVICE_TABLE(acpi, st33zp24_i2c_acpi_match); static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend, st33zp24_pm_resume); static struct i2c_driver st33zp24_i2c_driver = { .driver = { .name = TPM_ST33_I2C, .pm = &st33zp24_i2c_ops, .of_match_table = of_match_ptr(of_st33zp24_i2c_match), .acpi_match_table = ACPI_PTR(st33zp24_i2c_acpi_match), }, .probe = st33zp24_i2c_probe, .remove = st33zp24_i2c_remove, .id_table = st33zp24_i2c_id }; module_i2c_driver(st33zp24_i2c_driver); MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver"); MODULE_VERSION("1.3.0"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1