Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alan Tull | 810 | 95.07% | 4 | 50.00% |
Tobias Klauser | 19 | 2.23% | 1 | 12.50% |
Gustavo A. R. Silva | 18 | 2.11% | 1 | 12.50% |
Ian Abbott | 4 | 0.47% | 1 | 12.50% |
Philipp Zabel | 1 | 0.12% | 1 | 12.50% |
Total | 852 | 8 |
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231
// SPDX-License-Identifier: GPL-2.0 /* * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices * * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved. * * Includes this patch from the mailing list: * fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters * Signed-off-by: Anatolij Gustschin <agust@denx.de> */ /* * This driver manages bridges on a Altera SOCFPGA between the ARM host * processor system (HPS) and the embedded FPGA. * * This driver supports enabling and disabling of the configured ports, which * allows for safe reprogramming of the FPGA, assuming that the new FPGA image * uses the same port configuration. Bridges must be disabled before * reprogramming the FPGA and re-enabled after the FPGA has been programmed. */ #include <linux/clk.h> #include <linux/fpga/fpga-bridge.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/spinlock.h> #define ALT_L3_REMAP_OFST 0x0 #define ALT_L3_REMAP_MPUZERO_MSK 0x00000001 #define ALT_L3_REMAP_H2F_MSK 0x00000008 #define ALT_L3_REMAP_LWH2F_MSK 0x00000010 #define HPS2FPGA_BRIDGE_NAME "hps2fpga" #define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga" #define FPGA2HPS_BRIDGE_NAME "fpga2hps" struct altera_hps2fpga_data { const char *name; struct reset_control *bridge_reset; struct regmap *l3reg; unsigned int remap_mask; struct clk *clk; }; static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge) { struct altera_hps2fpga_data *priv = bridge->priv; return reset_control_status(priv->bridge_reset); } /* The L3 REMAP register is write only, so keep a cached value. */ static unsigned int l3_remap_shadow; static DEFINE_SPINLOCK(l3_remap_lock); static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv, bool enable) { unsigned long flags; int ret; /* bring bridge out of reset */ if (enable) ret = reset_control_deassert(priv->bridge_reset); else ret = reset_control_assert(priv->bridge_reset); if (ret) return ret; /* Allow bridge to be visible to L3 masters or not */ if (priv->remap_mask) { spin_lock_irqsave(&l3_remap_lock, flags); l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK; if (enable) l3_remap_shadow |= priv->remap_mask; else l3_remap_shadow &= ~priv->remap_mask; ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST, l3_remap_shadow); spin_unlock_irqrestore(&l3_remap_lock, flags); } return ret; } static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable) { return _alt_hps2fpga_enable_set(bridge->priv, enable); } static const struct fpga_bridge_ops altera_hps2fpga_br_ops = { .enable_set = alt_hps2fpga_enable_set, .enable_show = alt_hps2fpga_enable_show, }; static struct altera_hps2fpga_data hps2fpga_data = { .name = HPS2FPGA_BRIDGE_NAME, .remap_mask = ALT_L3_REMAP_H2F_MSK, }; static struct altera_hps2fpga_data lwhps2fpga_data = { .name = LWHPS2FPGA_BRIDGE_NAME, .remap_mask = ALT_L3_REMAP_LWH2F_MSK, }; static struct altera_hps2fpga_data fpga2hps_data = { .name = FPGA2HPS_BRIDGE_NAME, }; static const struct of_device_id altera_fpga_of_match[] = { { .compatible = "altr,socfpga-hps2fpga-bridge", .data = &hps2fpga_data }, { .compatible = "altr,socfpga-lwhps2fpga-bridge", .data = &lwhps2fpga_data }, { .compatible = "altr,socfpga-fpga2hps-bridge", .data = &fpga2hps_data }, {}, }; static int alt_fpga_bridge_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct altera_hps2fpga_data *priv; const struct of_device_id *of_id; struct fpga_bridge *br; u32 enable; int ret; of_id = of_match_device(altera_fpga_of_match, dev); if (!of_id) { dev_err(dev, "failed to match device\n"); return -ENODEV; } priv = (struct altera_hps2fpga_data *)of_id->data; priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node, 0); if (IS_ERR(priv->bridge_reset)) { dev_err(dev, "Could not get %s reset control\n", priv->name); return PTR_ERR(priv->bridge_reset); } if (priv->remap_mask) { priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs"); if (IS_ERR(priv->l3reg)) { dev_err(dev, "regmap for altr,l3regs lookup failed\n"); return PTR_ERR(priv->l3reg); } } priv->clk = devm_clk_get(dev, NULL); if (IS_ERR(priv->clk)) { dev_err(dev, "no clock specified\n"); return PTR_ERR(priv->clk); } ret = clk_prepare_enable(priv->clk); if (ret) { dev_err(dev, "could not enable clock\n"); return -EBUSY; } if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) { if (enable > 1) { dev_warn(dev, "invalid bridge-enable %u > 1\n", enable); } else { dev_info(dev, "%s bridge\n", (enable ? "enabling" : "disabling")); ret = _alt_hps2fpga_enable_set(priv, enable); if (ret) goto err; } } br = devm_fpga_bridge_create(dev, priv->name, &altera_hps2fpga_br_ops, priv); if (!br) { ret = -ENOMEM; goto err; } platform_set_drvdata(pdev, br); ret = fpga_bridge_register(br); if (ret) goto err; return 0; err: clk_disable_unprepare(priv->clk); return ret; } static int alt_fpga_bridge_remove(struct platform_device *pdev) { struct fpga_bridge *bridge = platform_get_drvdata(pdev); struct altera_hps2fpga_data *priv = bridge->priv; fpga_bridge_unregister(bridge); clk_disable_unprepare(priv->clk); return 0; } MODULE_DEVICE_TABLE(of, altera_fpga_of_match); static struct platform_driver alt_fpga_bridge_driver = { .probe = alt_fpga_bridge_probe, .remove = alt_fpga_bridge_remove, .driver = { .name = "altera_hps2fpga_bridge", .of_match_table = of_match_ptr(altera_fpga_of_match), }, }; module_platform_driver(alt_fpga_bridge_driver); MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge"); MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1