Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
David Lechner | 846 | 63.90% | 1 | 4.17% |
Geert Uytterhoeven | 238 | 17.98% | 2 | 8.33% |
Noralf Trönnes | 222 | 16.77% | 14 | 58.33% |
Ville Syrjälä | 9 | 0.68% | 2 | 8.33% |
Meghana Madhyastha | 4 | 0.30% | 2 | 8.33% |
Sam Ravnborg | 3 | 0.23% | 1 | 4.17% |
Daniel Vetter | 1 | 0.08% | 1 | 4.17% |
Andy Shevchenko | 1 | 0.08% | 1 | 4.17% |
Total | 1324 | 24 |
// SPDX-License-Identifier: GPL-2.0+ /* * DRM driver for display panels connected to a Sitronix ST7715R or ST7735R * display controller in SPI mode. * * Copyright 2017 David Lechner <david@lechnology.com> * Copyright (C) 2019 Glider bvba */ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/dma-buf.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/property.h> #include <linux/spi/spi.h> #include <video/mipi_display.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_drv.h> #include <drm/drm_fb_helper.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_mipi_dbi.h> #define ST7735R_FRMCTR1 0xb1 #define ST7735R_FRMCTR2 0xb2 #define ST7735R_FRMCTR3 0xb3 #define ST7735R_INVCTR 0xb4 #define ST7735R_PWCTR1 0xc0 #define ST7735R_PWCTR2 0xc1 #define ST7735R_PWCTR3 0xc2 #define ST7735R_PWCTR4 0xc3 #define ST7735R_PWCTR5 0xc4 #define ST7735R_VMCTR1 0xc5 #define ST7735R_GAMCTRP1 0xe0 #define ST7735R_GAMCTRN1 0xe1 #define ST7735R_MY BIT(7) #define ST7735R_MX BIT(6) #define ST7735R_MV BIT(5) #define ST7735R_RGB BIT(3) struct st7735r_cfg { const struct drm_display_mode mode; unsigned int left_offset; unsigned int top_offset; unsigned int write_only:1; unsigned int rgb:1; /* RGB (vs. BGR) */ }; struct st7735r_priv { struct mipi_dbi_dev dbidev; /* Must be first for .release() */ const struct st7735r_cfg *cfg; }; static void st7735r_pipe_enable(struct drm_simple_display_pipe *pipe, struct drm_crtc_state *crtc_state, struct drm_plane_state *plane_state) { struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv, dbidev); struct mipi_dbi *dbi = &dbidev->dbi; int ret, idx; u8 addr_mode; if (!drm_dev_enter(pipe->crtc.dev, &idx)) return; DRM_DEBUG_KMS("\n"); ret = mipi_dbi_poweron_reset(dbidev); if (ret) goto out_exit; msleep(150); mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); msleep(500); mipi_dbi_command(dbi, ST7735R_FRMCTR1, 0x01, 0x2c, 0x2d); mipi_dbi_command(dbi, ST7735R_FRMCTR2, 0x01, 0x2c, 0x2d); mipi_dbi_command(dbi, ST7735R_FRMCTR3, 0x01, 0x2c, 0x2d, 0x01, 0x2c, 0x2d); mipi_dbi_command(dbi, ST7735R_INVCTR, 0x07); mipi_dbi_command(dbi, ST7735R_PWCTR1, 0xa2, 0x02, 0x84); mipi_dbi_command(dbi, ST7735R_PWCTR2, 0xc5); mipi_dbi_command(dbi, ST7735R_PWCTR3, 0x0a, 0x00); mipi_dbi_command(dbi, ST7735R_PWCTR4, 0x8a, 0x2a); mipi_dbi_command(dbi, ST7735R_PWCTR5, 0x8a, 0xee); mipi_dbi_command(dbi, ST7735R_VMCTR1, 0x0e); mipi_dbi_command(dbi, MIPI_DCS_EXIT_INVERT_MODE); switch (dbidev->rotation) { default: addr_mode = ST7735R_MX | ST7735R_MY; break; case 90: addr_mode = ST7735R_MX | ST7735R_MV; break; case 180: addr_mode = 0; break; case 270: addr_mode = ST7735R_MY | ST7735R_MV; break; } if (priv->cfg->rgb) addr_mode |= ST7735R_RGB; mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); mipi_dbi_command(dbi, ST7735R_GAMCTRP1, 0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29, 0x25, 0x2b, 0x39, 0x00, 0x01, 0x03, 0x10); mipi_dbi_command(dbi, ST7735R_GAMCTRN1, 0x03, 0x1d, 0x07, 0x06, 0x2e, 0x2c, 0x29, 0x2d, 0x2e, 0x2e, 0x37, 0x3f, 0x00, 0x00, 0x02, 0x10); mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); msleep(100); mipi_dbi_command(dbi, MIPI_DCS_ENTER_NORMAL_MODE); msleep(20); mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); out_exit: drm_dev_exit(idx); } static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = { .enable = st7735r_pipe_enable, .disable = mipi_dbi_pipe_disable, .update = mipi_dbi_pipe_update, .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, }; static const struct st7735r_cfg jd_t18003_t01_cfg = { .mode = { DRM_SIMPLE_MODE(128, 160, 28, 35) }, /* Cannot read from Adafruit 1.8" display via SPI */ .write_only = true, }; static const struct st7735r_cfg rh128128t_cfg = { .mode = { DRM_SIMPLE_MODE(128, 128, 25, 26) }, .left_offset = 2, .top_offset = 3, .rgb = true, }; DEFINE_DRM_GEM_CMA_FOPS(st7735r_fops); static struct drm_driver st7735r_driver = { .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, .fops = &st7735r_fops, .release = mipi_dbi_release, DRM_GEM_CMA_VMAP_DRIVER_OPS, .debugfs_init = mipi_dbi_debugfs_init, .name = "st7735r", .desc = "Sitronix ST7735R", .date = "20171128", .major = 1, .minor = 0, }; static const struct of_device_id st7735r_of_match[] = { { .compatible = "jianda,jd-t18003-t01", .data = &jd_t18003_t01_cfg }, { .compatible = "okaya,rh128128t", .data = &rh128128t_cfg }, { }, }; MODULE_DEVICE_TABLE(of, st7735r_of_match); static const struct spi_device_id st7735r_id[] = { { "jd-t18003-t01", (uintptr_t)&jd_t18003_t01_cfg }, { }, }; MODULE_DEVICE_TABLE(spi, st7735r_id); static int st7735r_probe(struct spi_device *spi) { struct device *dev = &spi->dev; const struct st7735r_cfg *cfg; struct mipi_dbi_dev *dbidev; struct st7735r_priv *priv; struct drm_device *drm; struct mipi_dbi *dbi; struct gpio_desc *dc; u32 rotation = 0; int ret; cfg = device_get_match_data(&spi->dev); if (!cfg) cfg = (void *)spi_get_device_id(spi)->driver_data; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; dbidev = &priv->dbidev; priv->cfg = cfg; dbi = &dbidev->dbi; drm = &dbidev->drm; ret = devm_drm_dev_init(dev, drm, &st7735r_driver); if (ret) { kfree(dbidev); return ret; } drm_mode_config_init(drm); dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(dbi->reset)) { DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); return PTR_ERR(dbi->reset); } dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) { DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n"); return PTR_ERR(dc); } dbidev->backlight = devm_of_find_backlight(dev); if (IS_ERR(dbidev->backlight)) return PTR_ERR(dbidev->backlight); device_property_read_u32(dev, "rotation", &rotation); ret = mipi_dbi_spi_init(spi, dbi, dc); if (ret) return ret; if (cfg->write_only) dbi->read_commands = NULL; dbidev->left_offset = cfg->left_offset; dbidev->top_offset = cfg->top_offset; ret = mipi_dbi_dev_init(dbidev, &st7735r_pipe_funcs, &cfg->mode, rotation); if (ret) return ret; drm_mode_config_reset(drm); ret = drm_dev_register(drm, 0); if (ret) return ret; spi_set_drvdata(spi, drm); drm_fbdev_generic_setup(drm, 0); return 0; } static int st7735r_remove(struct spi_device *spi) { struct drm_device *drm = spi_get_drvdata(spi); drm_dev_unplug(drm); drm_atomic_helper_shutdown(drm); return 0; } static void st7735r_shutdown(struct spi_device *spi) { drm_atomic_helper_shutdown(spi_get_drvdata(spi)); } static struct spi_driver st7735r_spi_driver = { .driver = { .name = "st7735r", .of_match_table = st7735r_of_match, }, .id_table = st7735r_id, .probe = st7735r_probe, .remove = st7735r_remove, .shutdown = st7735r_shutdown, }; module_spi_driver(st7735r_spi_driver); MODULE_DESCRIPTION("Sitronix ST7735R DRM driver"); MODULE_AUTHOR("David Lechner <david@lechnology.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1