Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dave Airlie | 2649 | 79.72% | 8 | 27.59% |
Thomas Hellstrom | 419 | 12.61% | 5 | 17.24% |
Eric Anholt | 158 | 4.75% | 3 | 10.34% |
Sam Ravnborg | 67 | 2.02% | 2 | 6.90% |
Daniel Vetter | 10 | 0.30% | 4 | 13.79% |
Márton Németh | 7 | 0.21% | 1 | 3.45% |
Roel Kluin | 6 | 0.18% | 1 | 3.45% |
Nicolas Kaiser | 3 | 0.09% | 1 | 3.45% |
David Howells | 1 | 0.03% | 1 | 3.45% |
Joe Perches | 1 | 0.03% | 1 | 3.45% |
Damien Lespiau | 1 | 0.03% | 1 | 3.45% |
Rob Clark | 1 | 0.03% | 1 | 3.45% |
Total | 3323 | 29 |
/* via_dma.c -- DMA support for the VIA Unichrome/Pro * * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. * All Rights Reserved. * * Copyright 2004 Digeo, Inc., Palo Alto, CA, U.S.A. * All Rights Reserved. * * Copyright 2004 The Unichrome project. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sub license, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * * Authors: * Tungsten Graphics, * Erdi Chen, * Thomas Hellstrom. */ #include <linux/delay.h> #include <linux/uaccess.h> #include <drm/drm.h> #include <drm/drm_agpsupport.h> #include <drm/drm_device.h> #include <drm/drm_file.h> #include <drm/via_drm.h> #include "via_drv.h" #include "via_3d_reg.h" #define CMDBUF_ALIGNMENT_SIZE (0x100) #define CMDBUF_ALIGNMENT_MASK (0x0ff) /* defines for VIA 3D registers */ #define VIA_REG_STATUS 0x400 #define VIA_REG_TRANSET 0x43C #define VIA_REG_TRANSPACE 0x440 /* VIA_REG_STATUS(0x400): Engine Status */ #define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ #define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */ #define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */ #define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */ #define SetReg2DAGP(nReg, nData) { \ *((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1; \ *((uint32_t *)(vb) + 1) = (nData); \ vb = ((uint32_t *)vb) + 2; \ dev_priv->dma_low += 8; \ } #define via_flush_write_combine() mb() #define VIA_OUT_RING_QW(w1, w2) do { \ *vb++ = (w1); \ *vb++ = (w2); \ dev_priv->dma_low += 8; \ } while (0) static void via_cmdbuf_start(drm_via_private_t *dev_priv); static void via_cmdbuf_pause(drm_via_private_t *dev_priv); static void via_cmdbuf_reset(drm_via_private_t *dev_priv); static void via_cmdbuf_rewind(drm_via_private_t *dev_priv); static int via_wait_idle(drm_via_private_t *dev_priv); static void via_pad_cache(drm_via_private_t *dev_priv, int qwords); /* * Free space in command buffer. */ static uint32_t via_cmdbuf_space(drm_via_private_t *dev_priv) { uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; return ((hw_addr <= dev_priv->dma_low) ? (dev_priv->dma_high + hw_addr - dev_priv->dma_low) : (hw_addr - dev_priv->dma_low)); } /* * How much does the command regulator lag behind? */ static uint32_t via_cmdbuf_lag(drm_via_private_t *dev_priv) { uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; return ((hw_addr <= dev_priv->dma_low) ? (dev_priv->dma_low - hw_addr) : (dev_priv->dma_wrap + dev_priv->dma_low - hw_addr)); } /* * Check that the given size fits in the buffer, otherwise wait. */ static inline int via_cmdbuf_wait(drm_via_private_t *dev_priv, unsigned int size) { uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; uint32_t cur_addr, hw_addr, next_addr; volatile uint32_t *hw_addr_ptr; uint32_t count; hw_addr_ptr = dev_priv->hw_addr_ptr; cur_addr = dev_priv->dma_low; next_addr = cur_addr + size + 512 * 1024; count = 1000000; do { hw_addr = *hw_addr_ptr - agp_base; if (count-- == 0) { DRM_ERROR ("via_cmdbuf_wait timed out hw %x cur_addr %x next_addr %x\n", hw_addr, cur_addr, next_addr); return -1; } if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) msleep(1); } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); return 0; } /* * Checks whether buffer head has reach the end. Rewind the ring buffer * when necessary. * * Returns virtual pointer to ring buffer. */ static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv, unsigned int size) { if ((dev_priv->dma_low + size + 4 * CMDBUF_ALIGNMENT_SIZE) > dev_priv->dma_high) { via_cmdbuf_rewind(dev_priv); } if (via_cmdbuf_wait(dev_priv, size) != 0) return NULL; return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); } int via_dma_cleanup(struct drm_device *dev) { if (dev->dev_private) { drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; if (dev_priv->ring.virtual_start) { via_cmdbuf_reset(dev_priv); drm_legacy_ioremapfree(&dev_priv->ring.map, dev); dev_priv->ring.virtual_start = NULL; } } return 0; } static int via_initialize(struct drm_device *dev, drm_via_private_t *dev_priv, drm_via_dma_init_t *init) { if (!dev_priv || !dev_priv->mmio) { DRM_ERROR("via_dma_init called before via_map_init\n"); return -EFAULT; } if (dev_priv->ring.virtual_start != NULL) { DRM_ERROR("called again without calling cleanup\n"); return -EFAULT; } if (!dev->agp || !dev->agp->base) { DRM_ERROR("called with no agp memory available\n"); return -EFAULT; } if (dev_priv->chipset == VIA_DX9_0) { DRM_ERROR("AGP DMA is not supported on this chip\n"); return -EINVAL; } dev_priv->ring.map.offset = dev->agp->base + init->offset; dev_priv->ring.map.size = init->size; dev_priv->ring.map.type = 0; dev_priv->ring.map.flags = 0; dev_priv->ring.map.mtrr = 0; drm_legacy_ioremap(&dev_priv->ring.map, dev); if (dev_priv->ring.map.handle == NULL) { via_dma_cleanup(dev); DRM_ERROR("can not ioremap virtual address for" " ring buffer\n"); return -ENOMEM; } dev_priv->ring.virtual_start = dev_priv->ring.map.handle; dev_priv->dma_ptr = dev_priv->ring.virtual_start; dev_priv->dma_low = 0; dev_priv->dma_high = init->size; dev_priv->dma_wrap = init->size; dev_priv->dma_offset = init->offset; dev_priv->last_pause_ptr = NULL; dev_priv->hw_addr_ptr = (volatile uint32_t *)((char *)dev_priv->mmio->handle + init->reg_pause_addr); via_cmdbuf_start(dev_priv); return 0; } static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; drm_via_dma_init_t *init = data; int retcode = 0; switch (init->func) { case VIA_INIT_DMA: if (!capable(CAP_SYS_ADMIN)) retcode = -EPERM; else retcode = via_initialize(dev, dev_priv, init); break; case VIA_CLEANUP_DMA: if (!capable(CAP_SYS_ADMIN)) retcode = -EPERM; else retcode = via_dma_cleanup(dev); break; case VIA_DMA_INITIALIZED: retcode = (dev_priv->ring.virtual_start != NULL) ? 0 : -EFAULT; break; default: retcode = -EINVAL; break; } return retcode; } static int via_dispatch_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd) { drm_via_private_t *dev_priv; uint32_t *vb; int ret; dev_priv = (drm_via_private_t *) dev->dev_private; if (dev_priv->ring.virtual_start == NULL) { DRM_ERROR("called without initializing AGP ring buffer.\n"); return -EFAULT; } if (cmd->size > VIA_PCI_BUF_SIZE) return -ENOMEM; if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) return -EFAULT; /* * Running this function on AGP memory is dead slow. Therefore * we run it on a temporary cacheable system memory buffer and * copy it to AGP memory when ready. */ if ((ret = via_verify_command_stream((uint32_t *) dev_priv->pci_buf, cmd->size, dev, 1))) { return ret; } vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size); if (vb == NULL) return -EAGAIN; memcpy(vb, dev_priv->pci_buf, cmd->size); dev_priv->dma_low += cmd->size; /* * Small submissions somehow stalls the CPU. (AGP cache effects?) * pad to greater size. */ if (cmd->size < 0x100) via_pad_cache(dev_priv, (0x100 - cmd->size) >> 3); via_cmdbuf_pause(dev_priv); return 0; } int via_driver_dma_quiescent(struct drm_device *dev) { drm_via_private_t *dev_priv = dev->dev_private; if (!via_wait_idle(dev_priv)) return -EBUSY; return 0; } static int via_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { LOCK_TEST_WITH_RETURN(dev, file_priv); return via_driver_dma_quiescent(dev); } static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_via_cmdbuffer_t *cmdbuf = data; int ret; LOCK_TEST_WITH_RETURN(dev, file_priv); DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); ret = via_dispatch_cmdbuffer(dev, cmdbuf); return ret; } static int via_dispatch_pci_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd) { drm_via_private_t *dev_priv = dev->dev_private; int ret; if (cmd->size > VIA_PCI_BUF_SIZE) return -ENOMEM; if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) return -EFAULT; if ((ret = via_verify_command_stream((uint32_t *) dev_priv->pci_buf, cmd->size, dev, 0))) { return ret; } ret = via_parse_command_stream(dev, (const uint32_t *)dev_priv->pci_buf, cmd->size); return ret; } static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_via_cmdbuffer_t *cmdbuf = data; int ret; LOCK_TEST_WITH_RETURN(dev, file_priv); DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf); return ret; } static inline uint32_t *via_align_buffer(drm_via_private_t *dev_priv, uint32_t * vb, int qw_count) { for (; qw_count > 0; --qw_count) VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY); return vb; } /* * This function is used internally by ring buffer management code. * * Returns virtual pointer to ring buffer. */ static inline uint32_t *via_get_dma(drm_via_private_t *dev_priv) { return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); } /* * Hooks a segment of data into the tail of the ring-buffer by * modifying the pause address stored in the buffer itself. If * the regulator has already paused, restart it. */ static int via_hook_segment(drm_via_private_t *dev_priv, uint32_t pause_addr_hi, uint32_t pause_addr_lo, int no_pci_fire) { int paused, count; volatile uint32_t *paused_at = dev_priv->last_pause_ptr; uint32_t reader, ptr; uint32_t diff; paused = 0; via_flush_write_combine(); (void) *(volatile uint32_t *)(via_get_dma(dev_priv) - 1); *paused_at = pause_addr_lo; via_flush_write_combine(); (void) *paused_at; reader = *(dev_priv->hw_addr_ptr); ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; /* * If there is a possibility that the command reader will * miss the new pause address and pause on the old one, * In that case we need to program the new start address * using PCI. */ diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; count = 10000000; while (diff == 0 && count--) { paused = (via_read(dev_priv, 0x41c) & 0x80000000); if (paused) break; reader = *(dev_priv->hw_addr_ptr); diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; } paused = via_read(dev_priv, 0x41c) & 0x80000000; if (paused && !no_pci_fire) { reader = *(dev_priv->hw_addr_ptr); diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; diff &= (dev_priv->dma_high - 1); if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { DRM_ERROR("Paused at incorrect address. " "0x%08x, 0x%08x 0x%08x\n", ptr, reader, dev_priv->dma_diff); } else if (diff == 0) { /* * There is a concern that these writes may stall the PCI bus * if the GPU is not idle. However, idling the GPU first * doesn't make a difference. */ via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); via_read(dev_priv, VIA_REG_TRANSPACE); } } return paused; } static int via_wait_idle(drm_via_private_t *dev_priv) { int count = 10000000; while (!(via_read(dev_priv, VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count) ; while (count && (via_read(dev_priv, VIA_REG_STATUS) & (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY))) --count; return count; } static uint32_t *via_align_cmd(drm_via_private_t *dev_priv, uint32_t cmd_type, uint32_t addr, uint32_t *cmd_addr_hi, uint32_t *cmd_addr_lo, int skip_wait) { uint32_t agp_base; uint32_t cmd_addr, addr_lo, addr_hi; uint32_t *vb; uint32_t qw_pad_count; if (!skip_wait) via_cmdbuf_wait(dev_priv, 2 * CMDBUF_ALIGNMENT_SIZE); vb = via_get_dma(dev_priv); VIA_OUT_RING_QW(HC_HEADER2 | ((VIA_REG_TRANSET >> 2) << 12) | (VIA_REG_TRANSPACE >> 2), HC_ParaType_PreCR << 16); agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; qw_pad_count = (CMDBUF_ALIGNMENT_SIZE >> 3) - ((dev_priv->dma_low & CMDBUF_ALIGNMENT_MASK) >> 3); cmd_addr = (addr) ? addr : agp_base + dev_priv->dma_low - 8 + (qw_pad_count << 3); addr_lo = ((HC_SubA_HAGPBpL << 24) | (cmd_type & HC_HAGPBpID_MASK) | (cmd_addr & HC_HAGPBpL_MASK)); addr_hi = ((HC_SubA_HAGPBpH << 24) | (cmd_addr >> 24)); vb = via_align_buffer(dev_priv, vb, qw_pad_count - 1); VIA_OUT_RING_QW(*cmd_addr_hi = addr_hi, *cmd_addr_lo = addr_lo); return vb; } static void via_cmdbuf_start(drm_via_private_t *dev_priv) { uint32_t pause_addr_lo, pause_addr_hi; uint32_t start_addr, start_addr_lo; uint32_t end_addr, end_addr_lo; uint32_t command; uint32_t agp_base; uint32_t ptr; uint32_t reader; int count; dev_priv->dma_low = 0; agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; start_addr = agp_base; end_addr = agp_base + dev_priv->dma_high; start_addr_lo = ((HC_SubA_HAGPBstL << 24) | (start_addr & 0xFFFFFF)); end_addr_lo = ((HC_SubA_HAGPBendL << 24) | (end_addr & 0xFFFFFF)); command = ((HC_SubA_HAGPCMNT << 24) | (start_addr >> 24) | ((end_addr & 0xff000000) >> 16)); dev_priv->last_pause_ptr = via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 1) - 1; via_flush_write_combine(); (void) *(volatile uint32_t *)dev_priv->last_pause_ptr; via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); via_write(dev_priv, VIA_REG_TRANSPACE, command); via_write(dev_priv, VIA_REG_TRANSPACE, start_addr_lo); via_write(dev_priv, VIA_REG_TRANSPACE, end_addr_lo); via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); wmb(); via_write(dev_priv, VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK); via_read(dev_priv, VIA_REG_TRANSPACE); dev_priv->dma_diff = 0; count = 10000000; while (!(via_read(dev_priv, 0x41c) & 0x80000000) && count--); reader = *(dev_priv->hw_addr_ptr); ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; /* * This is the difference between where we tell the * command reader to pause and where it actually pauses. * This differs between hw implementation so we need to * detect it. */ dev_priv->dma_diff = ptr - reader; } static void via_pad_cache(drm_via_private_t *dev_priv, int qwords) { uint32_t *vb; via_cmdbuf_wait(dev_priv, qwords + 2); vb = via_get_dma(dev_priv); VIA_OUT_RING_QW(HC_HEADER2, HC_ParaType_NotTex << 16); via_align_buffer(dev_priv, vb, qwords); } static inline void via_dummy_bitblt(drm_via_private_t *dev_priv) { uint32_t *vb = via_get_dma(dev_priv); SetReg2DAGP(0x0C, (0 | (0 << 16))); SetReg2DAGP(0x10, 0 | (0 << 16)); SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000); } static void via_cmdbuf_jump(drm_via_private_t *dev_priv) { uint32_t agp_base; uint32_t pause_addr_lo, pause_addr_hi; uint32_t jump_addr_lo, jump_addr_hi; volatile uint32_t *last_pause_ptr; uint32_t dma_low_save1, dma_low_save2; agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, &jump_addr_lo, 0); dev_priv->dma_wrap = dev_priv->dma_low; /* * Wrap command buffer to the beginning. */ dev_priv->dma_low = 0; if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) DRM_ERROR("via_cmdbuf_jump failed\n"); via_dummy_bitblt(dev_priv); via_dummy_bitblt(dev_priv); last_pause_ptr = via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 0) - 1; via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 0); *last_pause_ptr = pause_addr_lo; dma_low_save1 = dev_priv->dma_low; /* * Now, set a trap that will pause the regulator if it tries to rerun the old * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause * and reissues the jump command over PCI, while the regulator has already taken the jump * and actually paused at the current buffer end). * There appears to be no other way to detect this condition, since the hw_addr_pointer * does not seem to get updated immediately when a jump occurs. */ last_pause_ptr = via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 0) - 1; via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, &pause_addr_lo, 0); *last_pause_ptr = pause_addr_lo; dma_low_save2 = dev_priv->dma_low; dev_priv->dma_low = dma_low_save1; via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); dev_priv->dma_low = dma_low_save2; via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); } static void via_cmdbuf_rewind(drm_via_private_t *dev_priv) { via_cmdbuf_jump(dev_priv); } static void via_cmdbuf_flush(drm_via_private_t *dev_priv, uint32_t cmd_type) { uint32_t pause_addr_lo, pause_addr_hi; via_align_cmd(dev_priv, cmd_type, 0, &pause_addr_hi, &pause_addr_lo, 0); via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); } static void via_cmdbuf_pause(drm_via_private_t *dev_priv) { via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE); } static void via_cmdbuf_reset(drm_via_private_t *dev_priv) { via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP); via_wait_idle(dev_priv); } /* * User interface to the space and lag functions. */ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_via_cmdbuf_size_t *d_siz = data; int ret = 0; uint32_t tmp_size, count; drm_via_private_t *dev_priv; DRM_DEBUG("\n"); LOCK_TEST_WITH_RETURN(dev, file_priv); dev_priv = (drm_via_private_t *) dev->dev_private; if (dev_priv->ring.virtual_start == NULL) { DRM_ERROR("called without initializing AGP ring buffer.\n"); return -EFAULT; } count = 1000000; tmp_size = d_siz->size; switch (d_siz->func) { case VIA_CMDBUF_SPACE: while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size) && --count) { if (!d_siz->wait) break; } if (!count) { DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n"); ret = -EAGAIN; } break; case VIA_CMDBUF_LAG: while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size) && --count) { if (!d_siz->wait) break; } if (!count) { DRM_ERROR("VIA_CMDBUF_LAG timed out.\n"); ret = -EAGAIN; } break; default: ret = -EFAULT; } d_siz->size = tmp_size; return ret; } const struct drm_ioctl_desc via_ioctls[] = { DRM_IOCTL_DEF_DRV(VIA_ALLOCMEM, via_mem_alloc, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_FREEMEM, via_mem_free, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_AGP_INIT, via_agp_init, DRM_AUTH|DRM_MASTER), DRM_IOCTL_DEF_DRV(VIA_FB_INIT, via_fb_init, DRM_AUTH|DRM_MASTER), DRM_IOCTL_DEF_DRV(VIA_MAP_INIT, via_map_init, DRM_AUTH|DRM_MASTER), DRM_IOCTL_DEF_DRV(VIA_DEC_FUTEX, via_decoder_futex, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_DMA_INIT, via_dma_init, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_CMDBUFFER, via_cmdbuffer, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_FLUSH, via_flush_ioctl, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_PCICMD, via_pci_cmdbuffer, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_CMDBUF_SIZE, via_cmdbuf_size, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_WAIT_IRQ, via_wait_irq, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_DMA_BLIT, via_dma_blit, DRM_AUTH), DRM_IOCTL_DEF_DRV(VIA_BLIT_SYNC, via_dma_blit_sync, DRM_AUTH) }; int via_max_ioctl = ARRAY_SIZE(via_ioctls);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1