Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Edward A. James | 1113 | 100.00% | 5 | 100.00% |
Total | 1113 | 5 |
// SPDX-License-Identifier: GPL-2.0+ // Copyright IBM Corp 2019 #include <linux/device.h> #include <linux/errno.h> #include <linux/fsi-occ.h> #include <linux/i2c.h> #include <linux/jiffies.h> #include <linux/module.h> #include <linux/sched.h> #include <asm/unaligned.h> #include "common.h" #define OCC_TIMEOUT_MS 1000 #define OCC_CMD_IN_PRG_WAIT_MS 50 /* OCB (on-chip control bridge - interface to OCC) registers */ #define OCB_DATA1 0x6B035 #define OCB_ADDR 0x6B070 #define OCB_DATA3 0x6B075 /* OCC SRAM address space */ #define OCC_SRAM_ADDR_CMD 0xFFFF6000 #define OCC_SRAM_ADDR_RESP 0xFFFF7000 #define OCC_DATA_ATTN 0x20010000 struct p8_i2c_occ { struct occ occ; struct i2c_client *client; }; #define to_p8_i2c_occ(x) container_of((x), struct p8_i2c_occ, occ) static int p8_i2c_occ_getscom(struct i2c_client *client, u32 address, u8 *data) { ssize_t rc; __be64 buf; struct i2c_msg msgs[2]; /* p8 i2c slave requires shift */ address <<= 1; msgs[0].addr = client->addr; msgs[0].flags = client->flags & I2C_M_TEN; msgs[0].len = sizeof(u32); /* address is a scom address; bus-endian */ msgs[0].buf = (char *)&address; /* data from OCC is big-endian */ msgs[1].addr = client->addr; msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; msgs[1].len = sizeof(u64); msgs[1].buf = (char *)&buf; rc = i2c_transfer(client->adapter, msgs, 2); if (rc < 0) return rc; *(u64 *)data = be64_to_cpu(buf); return 0; } static int p8_i2c_occ_putscom(struct i2c_client *client, u32 address, u8 *data) { u32 buf[3]; ssize_t rc; /* p8 i2c slave requires shift */ address <<= 1; /* address is bus-endian; data passed through from user as-is */ buf[0] = address; memcpy(&buf[1], &data[4], sizeof(u32)); memcpy(&buf[2], data, sizeof(u32)); rc = i2c_master_send(client, (const char *)buf, sizeof(buf)); if (rc < 0) return rc; else if (rc != sizeof(buf)) return -EIO; return 0; } static int p8_i2c_occ_putscom_u32(struct i2c_client *client, u32 address, u32 data0, u32 data1) { u8 buf[8]; memcpy(buf, &data0, 4); memcpy(buf + 4, &data1, 4); return p8_i2c_occ_putscom(client, address, buf); } static int p8_i2c_occ_putscom_be(struct i2c_client *client, u32 address, u8 *data) { __be32 data0, data1; memcpy(&data0, data, 4); memcpy(&data1, data + 4, 4); return p8_i2c_occ_putscom_u32(client, address, be32_to_cpu(data0), be32_to_cpu(data1)); } static int p8_i2c_occ_send_cmd(struct occ *occ, u8 *cmd) { int i, rc; unsigned long start; u16 data_length; const unsigned long timeout = msecs_to_jiffies(OCC_TIMEOUT_MS); const long wait_time = msecs_to_jiffies(OCC_CMD_IN_PRG_WAIT_MS); struct p8_i2c_occ *ctx = to_p8_i2c_occ(occ); struct i2c_client *client = ctx->client; struct occ_response *resp = &occ->resp; start = jiffies; /* set sram address for command */ rc = p8_i2c_occ_putscom_u32(client, OCB_ADDR, OCC_SRAM_ADDR_CMD, 0); if (rc) return rc; /* write command (expected to already be BE), we need bus-endian... */ rc = p8_i2c_occ_putscom_be(client, OCB_DATA3, cmd); if (rc) return rc; /* trigger OCC attention */ rc = p8_i2c_occ_putscom_u32(client, OCB_DATA1, OCC_DATA_ATTN, 0); if (rc) return rc; do { /* set sram address for response */ rc = p8_i2c_occ_putscom_u32(client, OCB_ADDR, OCC_SRAM_ADDR_RESP, 0); if (rc) return rc; rc = p8_i2c_occ_getscom(client, OCB_DATA3, (u8 *)resp); if (rc) return rc; /* wait for OCC */ if (resp->return_status == OCC_RESP_CMD_IN_PRG) { rc = -EALREADY; if (time_after(jiffies, start + timeout)) break; set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(wait_time); } } while (rc); /* check the OCC response */ switch (resp->return_status) { case OCC_RESP_CMD_IN_PRG: rc = -ETIMEDOUT; break; case OCC_RESP_SUCCESS: rc = 0; break; case OCC_RESP_CMD_INVAL: case OCC_RESP_CMD_LEN_INVAL: case OCC_RESP_DATA_INVAL: case OCC_RESP_CHKSUM_ERR: rc = -EINVAL; break; case OCC_RESP_INT_ERR: case OCC_RESP_BAD_STATE: case OCC_RESP_CRIT_EXCEPT: case OCC_RESP_CRIT_INIT: case OCC_RESP_CRIT_WATCHDOG: case OCC_RESP_CRIT_OCB: case OCC_RESP_CRIT_HW: rc = -EREMOTEIO; break; default: rc = -EPROTO; } if (rc < 0) return rc; data_length = get_unaligned_be16(&resp->data_length); if (data_length > OCC_RESP_DATA_BYTES) return -EMSGSIZE; /* fetch the rest of the response data */ for (i = 8; i < data_length + 7; i += 8) { rc = p8_i2c_occ_getscom(client, OCB_DATA3, ((u8 *)resp) + i); if (rc) return rc; } return 0; } static int p8_i2c_occ_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct occ *occ; struct p8_i2c_occ *ctx = devm_kzalloc(&client->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; ctx->client = client; occ = &ctx->occ; occ->bus_dev = &client->dev; dev_set_drvdata(&client->dev, occ); occ->powr_sample_time_us = 250; occ->poll_cmd_data = 0x10; /* P8 OCC poll data */ occ->send_cmd = p8_i2c_occ_send_cmd; return occ_setup(occ, "p8_occ"); } static int p8_i2c_occ_remove(struct i2c_client *client) { struct occ *occ = dev_get_drvdata(&client->dev); occ_shutdown(occ); return 0; } static const struct of_device_id p8_i2c_occ_of_match[] = { { .compatible = "ibm,p8-occ-hwmon" }, {} }; MODULE_DEVICE_TABLE(of, p8_i2c_occ_of_match); static struct i2c_driver p8_i2c_occ_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "occ-hwmon", .of_match_table = p8_i2c_occ_of_match, }, .probe = p8_i2c_occ_probe, .remove = p8_i2c_occ_remove, }; module_i2c_driver(p8_i2c_occ_driver); MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); MODULE_DESCRIPTION("BMC P8 OCC hwmon driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1