Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Elie Morisse | 625 | 100.00% | 1 | 100.00% |
Total | 625 | 1 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * AMD MP2 I2C adapter driver * * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> * Elie Morisse <syniurge@gmail.com> */ #ifndef I2C_AMD_PCI_MP2_H #define I2C_AMD_PCI_MP2_H #include <linux/i2c.h> #include <linux/pci.h> #include <linux/pm_runtime.h> #define PCI_DEVICE_ID_AMD_MP2 0x15E6 struct amd_i2c_common; struct amd_mp2_dev; enum { /* MP2 C2P Message Registers */ AMD_C2P_MSG0 = 0x10500, /* MP2 Message for I2C0 */ AMD_C2P_MSG1 = 0x10504, /* MP2 Message for I2C1 */ AMD_C2P_MSG2 = 0x10508, /* DRAM Address Lo / Data 0 */ AMD_C2P_MSG3 = 0x1050c, /* DRAM Address HI / Data 1 */ AMD_C2P_MSG4 = 0x10510, /* Data 2 */ AMD_C2P_MSG5 = 0x10514, /* Data 3 */ AMD_C2P_MSG6 = 0x10518, /* Data 4 */ AMD_C2P_MSG7 = 0x1051c, /* Data 5 */ AMD_C2P_MSG8 = 0x10520, /* Data 6 */ AMD_C2P_MSG9 = 0x10524, /* Data 7 */ /* MP2 P2C Message Registers */ AMD_P2C_MSG0 = 0x10680, /* Do not use */ AMD_P2C_MSG1 = 0x10684, /* I2C0 interrupt register */ AMD_P2C_MSG2 = 0x10688, /* I2C1 interrupt register */ AMD_P2C_MSG3 = 0x1068C, /* MP2 debug info */ AMD_P2C_MSG_INTEN = 0x10690, /* MP2 interrupt gen register */ AMD_P2C_MSG_INTSTS = 0x10694, /* Interrupt status */ }; /* Command register data structures */ #define i2c_none (-1) enum i2c_cmd { i2c_read = 0, i2c_write, i2c_enable, i2c_disable, number_of_sensor_discovered, is_mp2_active, invalid_cmd = 0xF, }; enum speed_enum { speed100k = 0, speed400k = 1, speed1000k = 2, speed1400k = 3, speed3400k = 4 }; enum mem_type { use_dram = 0, use_c2pmsg = 1, }; /** * union i2c_cmd_base : bit access of C2P commands * @i2c_cmd: bit 0..3 i2c R/W command * @bus_id: bit 4..7 i2c bus index * @slave_addr: bit 8..15 slave address * @length: bit 16..27 read/write length * @i2c_speed: bit 28..30 bus speed * @mem_type: bit 31 0-DRAM; 1-C2P msg o/p */ union i2c_cmd_base { u32 ul; struct { enum i2c_cmd i2c_cmd : 4; u8 bus_id : 4; u32 slave_addr : 8; u32 length : 12; enum speed_enum i2c_speed : 3; enum mem_type mem_type : 1; } s; }; enum response_type { invalid_response = 0, command_success = 1, command_failed = 2, }; enum status_type { i2c_readcomplete_event = 0, i2c_readfail_event = 1, i2c_writecomplete_event = 2, i2c_writefail_event = 3, i2c_busenable_complete = 4, i2c_busenable_failed = 5, i2c_busdisable_complete = 6, i2c_busdisable_failed = 7, invalid_data_length = 8, invalid_slave_address = 9, invalid_i2cbus_id = 10, invalid_dram_addr = 11, invalid_command = 12, mp2_active = 13, numberof_sensors_discovered_resp = 14, i2c_bus_notinitialized }; /** * union i2c_event : bit access of P2C events * @response: bit 0..1 i2c response type * @status: bit 2..6 status_type * @mem_type: bit 7 0-DRAM; 1-C2P msg o/p * @bus_id: bit 8..11 i2c bus id * @length: bit 12..23 message length * @slave_addr: bit 24-31 slave address */ union i2c_event { u32 ul; struct { enum response_type response : 2; enum status_type status : 5; enum mem_type mem_type : 1; u8 bus_id : 4; u32 length : 12; u32 slave_addr : 8; } r; }; /** * struct amd_i2c_common - per bus/i2c adapter context, shared * between the pci and the platform driver * @eventval: MP2 event value set by the IRQ handler * @mp2_dev: MP2 pci device this adapter is part of * @msg: i2c message * @cmd_completion: function called by the IRQ handler to signal * the platform driver * @reqcmd: requested i2c command type * @cmd_success: set to true if the MP2 responded to a command with * the expected status and response type * @bus_id: bus index * @i2c_speed: i2c bus speed determined by the slowest slave * @dma_buf: if msg length > 32, holds the DMA buffer virtual address * @dma_addr: if msg length > 32, holds the DMA buffer address */ struct amd_i2c_common { union i2c_event eventval; struct amd_mp2_dev *mp2_dev; struct i2c_msg *msg; void (*cmd_completion)(struct amd_i2c_common *i2c_common); enum i2c_cmd reqcmd; u8 cmd_success; u8 bus_id; enum speed_enum i2c_speed; u8 *dma_buf; dma_addr_t dma_addr; #ifdef CONFIG_PM int (*suspend)(struct amd_i2c_common *i2c_common); int (*resume)(struct amd_i2c_common *i2c_common); #endif /* CONFIG_PM */ }; /** * struct amd_mp2_dev - per PCI device context * @pci_dev: PCI driver node * @busses: MP2 devices may have up to two busses, * each bus corresponding to an i2c adapter * @mmio: iommapped registers * @c2p_lock: controls access to the C2P mailbox shared between * the two adapters * @c2p_lock_busid: id of the adapter which locked c2p_lock */ struct amd_mp2_dev { struct pci_dev *pci_dev; struct amd_i2c_common *busses[2]; void __iomem *mmio; struct mutex c2p_lock; u8 c2p_lock_busid; unsigned int probed; }; #define ndev_pdev(ndev) ((ndev)->pci_dev) #define ndev_name(ndev) pci_name(ndev_pdev(ndev)) #define ndev_dev(ndev) (&ndev_pdev(ndev)->dev) #define work_amd_i2c_common(__work) \ container_of(__work, struct amd_i2c_common, work.work) /* PCIe communication driver */ int amd_mp2_rw(struct amd_i2c_common *i2c_common, enum i2c_cmd reqcmd); int amd_mp2_bus_enable_set(struct amd_i2c_common *i2c_common, bool enable); void amd_mp2_process_event(struct amd_i2c_common *i2c_common); void amd_mp2_rw_timeout(struct amd_i2c_common *i2c_common); int amd_mp2_register_cb(struct amd_i2c_common *i2c_common); int amd_mp2_unregister_cb(struct amd_i2c_common *i2c_common); struct amd_mp2_dev *amd_mp2_find_device(void); static inline void amd_mp2_pm_runtime_get(struct amd_mp2_dev *mp2_dev) { pm_runtime_get_sync(&mp2_dev->pci_dev->dev); } static inline void amd_mp2_pm_runtime_put(struct amd_mp2_dev *mp2_dev) { pm_runtime_mark_last_busy(&mp2_dev->pci_dev->dev); pm_runtime_put_autosuspend(&mp2_dev->pci_dev->dev); } #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1