Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mauro Carvalho Chehab | 2343 | 99.58% | 11 | 73.33% |
Peter Senna Tschudin | 4 | 0.17% | 1 | 6.67% |
Thomas Gleixner | 2 | 0.08% | 1 | 6.67% |
Max Kellermann | 2 | 0.08% | 1 | 6.67% |
Luc Van Oostenryck | 2 | 0.08% | 1 | 6.67% |
Total | 2353 | 15 |
// SPDX-License-Identifier: GPL-2.0-only /* * Sharp VA3A5JZ921 One Seg Broadcast Module driver * This device is labeled as just S. 921 at the top of the frontend can * * Copyright (C) 2009-2010 Mauro Carvalho Chehab * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com> * * Developed for Leadership SBTVD 1seg device sold in Brazil * * Frontend module based on cx24123 driver, getting some info from * the old s921 driver. * * FIXME: Need to port to DVB v5.2 API */ #include <linux/kernel.h> #include <asm/div64.h> #include <media/dvb_frontend.h> #include "s921.h" static int debug = 1; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); #define rc(args...) do { \ printk(KERN_ERR "s921: " args); \ } while (0) #define dprintk(args...) \ do { \ if (debug) { \ printk(KERN_DEBUG "s921: %s: ", __func__); \ printk(args); \ } \ } while (0) struct s921_state { struct i2c_adapter *i2c; const struct s921_config *config; struct dvb_frontend frontend; /* The Demod can't easily provide these, we cache them */ u32 currentfreq; }; /* * Various tuner defaults need to be established for a given frequency kHz. * fixme: The bounds on the bands do not match the doc in real life. * fixme: Some of them have been moved, other might need adjustment. */ static struct s921_bandselect_val { u32 freq_low; u8 band_reg; } s921_bandselect[] = { { 0, 0x7b }, { 485140000, 0x5b }, { 515140000, 0x3b }, { 545140000, 0x1b }, { 599140000, 0xfb }, { 623140000, 0xdb }, { 659140000, 0xbb }, { 713140000, 0x9b }, }; struct regdata { u8 reg; u8 data; }; static struct regdata s921_init[] = { { 0x01, 0x80 }, /* Probably, a reset sequence */ { 0x01, 0x40 }, { 0x01, 0x80 }, { 0x01, 0x40 }, { 0x02, 0x00 }, { 0x03, 0x40 }, { 0x04, 0x01 }, { 0x05, 0x00 }, { 0x06, 0x00 }, { 0x07, 0x00 }, { 0x08, 0x00 }, { 0x09, 0x00 }, { 0x0a, 0x00 }, { 0x0b, 0x5a }, { 0x0c, 0x00 }, { 0x0d, 0x00 }, { 0x0f, 0x00 }, { 0x13, 0x1b }, { 0x14, 0x80 }, { 0x15, 0x40 }, { 0x17, 0x70 }, { 0x18, 0x01 }, { 0x19, 0x12 }, { 0x1a, 0x01 }, { 0x1b, 0x12 }, { 0x1c, 0xa0 }, { 0x1d, 0x00 }, { 0x1e, 0x0a }, { 0x1f, 0x08 }, { 0x20, 0x40 }, { 0x21, 0xff }, { 0x22, 0x4c }, { 0x23, 0x4e }, { 0x24, 0x4c }, { 0x25, 0x00 }, { 0x26, 0x00 }, { 0x27, 0xf4 }, { 0x28, 0x60 }, { 0x29, 0x88 }, { 0x2a, 0x40 }, { 0x2b, 0x40 }, { 0x2c, 0xff }, { 0x2d, 0x00 }, { 0x2e, 0xff }, { 0x2f, 0x00 }, { 0x30, 0x20 }, { 0x31, 0x06 }, { 0x32, 0x0c }, { 0x34, 0x0f }, { 0x37, 0xfe }, { 0x38, 0x00 }, { 0x39, 0x63 }, { 0x3a, 0x10 }, { 0x3b, 0x10 }, { 0x47, 0x00 }, { 0x49, 0xe5 }, { 0x4b, 0x00 }, { 0x50, 0xc0 }, { 0x52, 0x20 }, { 0x54, 0x5a }, { 0x55, 0x5b }, { 0x56, 0x40 }, { 0x57, 0x70 }, { 0x5c, 0x50 }, { 0x5d, 0x00 }, { 0x62, 0x17 }, { 0x63, 0x2f }, { 0x64, 0x6f }, { 0x68, 0x00 }, { 0x69, 0x89 }, { 0x6a, 0x00 }, { 0x6b, 0x00 }, { 0x6c, 0x00 }, { 0x6d, 0x00 }, { 0x6e, 0x00 }, { 0x70, 0x10 }, { 0x71, 0x00 }, { 0x75, 0x00 }, { 0x76, 0x30 }, { 0x77, 0x01 }, { 0xaf, 0x00 }, { 0xb0, 0xa0 }, { 0xb2, 0x3d }, { 0xb3, 0x25 }, { 0xb4, 0x8b }, { 0xb5, 0x4b }, { 0xb6, 0x3f }, { 0xb7, 0xff }, { 0xb8, 0xff }, { 0xb9, 0xfc }, { 0xba, 0x00 }, { 0xbb, 0x00 }, { 0xbc, 0x00 }, { 0xd0, 0x30 }, { 0xe4, 0x84 }, { 0xf0, 0x48 }, { 0xf1, 0x19 }, { 0xf2, 0x5a }, { 0xf3, 0x8e }, { 0xf4, 0x2d }, { 0xf5, 0x07 }, { 0xf6, 0x5a }, { 0xf7, 0xba }, { 0xf8, 0xd7 }, }; static struct regdata s921_prefreq[] = { { 0x47, 0x60 }, { 0x68, 0x00 }, { 0x69, 0x89 }, { 0xf0, 0x48 }, { 0xf1, 0x19 }, }; static struct regdata s921_postfreq[] = { { 0xf5, 0xae }, { 0xf6, 0xb7 }, { 0xf7, 0xba }, { 0xf8, 0xd7 }, { 0x68, 0x0a }, { 0x69, 0x09 }, }; static int s921_i2c_writereg(struct s921_state *state, u8 i2c_addr, int reg, int data) { u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 }; int rc; rc = i2c_transfer(state->i2c, &msg, 1); if (rc != 1) { printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, rc, reg, data); return rc; } return 0; } static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr, struct regdata *rd, int size) { int i, rc; for (i = 0; i < size; i++) { rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data); if (rc < 0) return rc; } return 0; } static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg) { u8 val; int rc; struct i2c_msg msg[] = { { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } }; rc = i2c_transfer(state->i2c, msg, 2); if (rc != 2) { rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); return rc; } return val; } #define s921_readreg(state, reg) \ s921_i2c_readreg(state, state->config->demod_address, reg) #define s921_writereg(state, reg, val) \ s921_i2c_writereg(state, state->config->demod_address, reg, val) #define s921_writeregdata(state, regdata) \ s921_i2c_writeregdata(state, state->config->demod_address, \ regdata, ARRAY_SIZE(regdata)) static int s921_pll_tune(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct s921_state *state = fe->demodulator_priv; int band, rc, i; unsigned long f_offset; u8 f_switch; u64 offset; dprintk("frequency=%i\n", p->frequency); for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++) if (p->frequency < s921_bandselect[band].freq_low) break; band--; if (band < 0) { rc("%s: frequency out of range\n", __func__); return -EINVAL; } f_switch = s921_bandselect[band].band_reg; offset = ((u64)p->frequency) * 258; do_div(offset, 6000000); f_offset = ((unsigned long)offset) + 2321; rc = s921_writeregdata(state, s921_prefreq); if (rc < 0) return rc; rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff); if (rc < 0) return rc; rc = s921_writereg(state, 0xf3, f_offset & 0xff); if (rc < 0) return rc; rc = s921_writereg(state, 0xf4, f_switch); if (rc < 0) return rc; rc = s921_writeregdata(state, s921_postfreq); if (rc < 0) return rc; for (i = 0 ; i < 6; i++) { rc = s921_readreg(state, 0x80); dprintk("status 0x80: %02x\n", rc); } rc = s921_writereg(state, 0x01, 0x40); if (rc < 0) return rc; rc = s921_readreg(state, 0x01); dprintk("status 0x01: %02x\n", rc); rc = s921_readreg(state, 0x80); dprintk("status 0x80: %02x\n", rc); rc = s921_readreg(state, 0x80); dprintk("status 0x80: %02x\n", rc); rc = s921_readreg(state, 0x32); dprintk("status 0x32: %02x\n", rc); dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset); return 0; } static int s921_initfe(struct dvb_frontend *fe) { struct s921_state *state = fe->demodulator_priv; int rc; dprintk("\n"); rc = s921_writeregdata(state, s921_init); if (rc < 0) return rc; return 0; } static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status) { struct s921_state *state = fe->demodulator_priv; int regstatus, rc; *status = 0; rc = s921_readreg(state, 0x81); if (rc < 0) return rc; regstatus = rc << 8; rc = s921_readreg(state, 0x82); if (rc < 0) return rc; regstatus |= rc; dprintk("status = %04x\n", regstatus); /* Full Sync - We don't know what each bit means on regs 0x81/0x82 */ if ((regstatus & 0xff) == 0x40) { *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; } else if (regstatus & 0x40) { /* This is close to Full Sync, but not enough to get useful info */ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC; } return 0; } static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { enum fe_status status; struct s921_state *state = fe->demodulator_priv; int rc; /* FIXME: Use the proper register for it... 0x80? */ rc = s921_read_status(fe, &status); if (rc < 0) return rc; *strength = (status & FE_HAS_LOCK) ? 0xffff : 0; dprintk("strength = 0x%04x\n", *strength); rc = s921_readreg(state, 0x01); dprintk("status 0x01: %02x\n", rc); rc = s921_readreg(state, 0x80); dprintk("status 0x80: %02x\n", rc); rc = s921_readreg(state, 0x32); dprintk("status 0x32: %02x\n", rc); return 0; } static int s921_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct s921_state *state = fe->demodulator_priv; int rc; dprintk("\n"); /* FIXME: We don't know how to use non-auto mode */ rc = s921_pll_tune(fe); if (rc < 0) return rc; state->currentfreq = p->frequency; return 0; } static int s921_get_frontend(struct dvb_frontend *fe, struct dtv_frontend_properties *p) { struct s921_state *state = fe->demodulator_priv; /* FIXME: Probably it is possible to get it from regs f1 and f2 */ p->frequency = state->currentfreq; p->delivery_system = SYS_ISDBT; return 0; } static int s921_tune(struct dvb_frontend *fe, bool re_tune, unsigned int mode_flags, unsigned int *delay, enum fe_status *status) { int rc = 0; dprintk("\n"); if (re_tune) rc = s921_set_frontend(fe); if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) s921_read_status(fe, status); return rc; } static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe) { return DVBFE_ALGO_HW; } static void s921_release(struct dvb_frontend *fe) { struct s921_state *state = fe->demodulator_priv; dprintk("\n"); kfree(state); } static const struct dvb_frontend_ops s921_ops; struct dvb_frontend *s921_attach(const struct s921_config *config, struct i2c_adapter *i2c) { /* allocate memory for the internal state */ struct s921_state *state = kzalloc(sizeof(struct s921_state), GFP_KERNEL); dprintk("\n"); if (!state) { rc("Unable to kzalloc\n"); return NULL; } /* setup the state */ state->config = config; state->i2c = i2c; /* create dvb_frontend */ memcpy(&state->frontend.ops, &s921_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; } EXPORT_SYMBOL(s921_attach); static const struct dvb_frontend_ops s921_ops = { .delsys = { SYS_ISDBT }, /* Use dib8000 values per default */ .info = { .name = "Sharp S921", .frequency_min_hz = 470 * MHz, /* * Max should be 770MHz instead, according with Sharp docs, * but Leadership doc says it works up to 806 MHz. This is * required to get channel 69, used in Brazil */ .frequency_max_hz = 806 * MHz, .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, }, .release = s921_release, .init = s921_initfe, .set_frontend = s921_set_frontend, .get_frontend = s921_get_frontend, .read_status = s921_read_status, .read_signal_strength = s921_read_signal_strength, .tune = s921_tune, .get_frontend_algo = s921_get_algo, }; MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1