Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Uri Shkolnik | 1125 | 85.88% | 2 | 12.50% |
Mauro Carvalho Chehab | 116 | 8.85% | 7 | 43.75% |
Udi Atar | 52 | 3.97% | 1 | 6.25% |
Márton Németh | 6 | 0.46% | 2 | 12.50% |
Hans Verkuil | 3 | 0.23% | 1 | 6.25% |
Paul Gortmaker | 3 | 0.23% | 1 | 6.25% |
Tejun Heo | 3 | 0.23% | 1 | 6.25% |
Thomas Gleixner | 2 | 0.15% | 1 | 6.25% |
Total | 1310 | 16 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * smssdio.c - Siano 1xxx SDIO interface driver * * Copyright 2008 Pierre Ossman * * Based on code by Siano Mobile Silicon, Inc., * Copyright (C) 2006-2008, Uri Shkolnik * * This hardware is a bit odd in that all transfers should be done * to/from the SMSSDIO_DATA register, yet the "increase address" bit * always needs to be set. * * Also, buffers from the card are always aligned to 128 byte * boundaries. */ /* * General cleanup notes: * * - only typedefs should be name *_t * * - use ERR_PTR and friends for smscore_register_device() * * - smscore_getbuffer should zero fields * * Fix stop command */ #include "smscoreapi.h" #include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/firmware.h> #include <linux/delay.h> #include <linux/mmc/card.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/sdio_ids.h> #include <linux/module.h> #include "sms-cards.h" #include "smsendian.h" /* Registers */ #define SMSSDIO_DATA 0x00 #define SMSSDIO_INT 0x04 #define SMSSDIO_BLOCK_SIZE 128 static const struct sdio_device_id smssdio_ids[] = { {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR), .driver_data = SMS1XXX_BOARD_SIANO_STELLAR}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0), .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0), .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0), .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE), .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x302), .driver_data = SMS1XXX_BOARD_SIANO_MING}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x500), .driver_data = SMS1XXX_BOARD_SIANO_PELE}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x600), .driver_data = SMS1XXX_BOARD_SIANO_RIO}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x700), .driver_data = SMS1XXX_BOARD_SIANO_DENVER_2160}, {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, 0x800), .driver_data = SMS1XXX_BOARD_SIANO_DENVER_1530}, { /* end: all zeroes */ }, }; MODULE_DEVICE_TABLE(sdio, smssdio_ids); struct smssdio_device { struct sdio_func *func; struct smscore_device_t *coredev; struct smscore_buffer_t *split_cb; }; /*******************************************************************/ /* Siano core callbacks */ /*******************************************************************/ static int smssdio_sendrequest(void *context, void *buffer, size_t size) { int ret = 0; struct smssdio_device *smsdev; smsdev = context; sdio_claim_host(smsdev->func); smsendian_handle_tx_message((struct sms_msg_data *) buffer); while (size >= smsdev->func->cur_blksize) { ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, buffer, smsdev->func->cur_blksize); if (ret) goto out; buffer += smsdev->func->cur_blksize; size -= smsdev->func->cur_blksize; } if (size) { ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, buffer, size); } out: sdio_release_host(smsdev->func); return ret; } /*******************************************************************/ /* SDIO callbacks */ /*******************************************************************/ static void smssdio_interrupt(struct sdio_func *func) { int ret; struct smssdio_device *smsdev; struct smscore_buffer_t *cb; struct sms_msg_hdr *hdr; size_t size; smsdev = sdio_get_drvdata(func); /* * The interrupt register has no defined meaning. It is just * a way of turning of the level triggered interrupt. */ (void)sdio_readb(func, SMSSDIO_INT, &ret); if (ret) { pr_err("Unable to read interrupt register!\n"); return; } if (smsdev->split_cb == NULL) { cb = smscore_getbuffer(smsdev->coredev); if (!cb) { pr_err("Unable to allocate data buffer!\n"); return; } ret = sdio_memcpy_fromio(smsdev->func, cb->p, SMSSDIO_DATA, SMSSDIO_BLOCK_SIZE); if (ret) { pr_err("Error %d reading initial block!\n", ret); return; } hdr = cb->p; if (hdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG) { smsdev->split_cb = cb; return; } if (hdr->msg_length > smsdev->func->cur_blksize) size = hdr->msg_length - smsdev->func->cur_blksize; else size = 0; } else { cb = smsdev->split_cb; hdr = cb->p; size = hdr->msg_length - sizeof(struct sms_msg_hdr); smsdev->split_cb = NULL; } if (size) { void *buffer; buffer = cb->p + (hdr->msg_length - size); size = ALIGN(size, SMSSDIO_BLOCK_SIZE); BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE); /* * First attempt to transfer all of it in one go... */ ret = sdio_memcpy_fromio(smsdev->func, buffer, SMSSDIO_DATA, size); if (ret && ret != -EINVAL) { smscore_putbuffer(smsdev->coredev, cb); pr_err("Error %d reading data from card!\n", ret); return; } /* * ..then fall back to one block at a time if that is * not possible... * * (we have to do this manually because of the * problem with the "increase address" bit) */ if (ret == -EINVAL) { while (size) { ret = sdio_memcpy_fromio(smsdev->func, buffer, SMSSDIO_DATA, smsdev->func->cur_blksize); if (ret) { smscore_putbuffer(smsdev->coredev, cb); pr_err("Error %d reading data from card!\n", ret); return; } buffer += smsdev->func->cur_blksize; if (size > smsdev->func->cur_blksize) size -= smsdev->func->cur_blksize; else size = 0; } } } cb->size = hdr->msg_length; cb->offset = 0; smsendian_handle_rx_message((struct sms_msg_data *) cb->p); smscore_onresponse(smsdev->coredev, cb); } static int smssdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { int ret; int board_id; struct smssdio_device *smsdev; struct smsdevice_params_t params; board_id = id->driver_data; smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL); if (!smsdev) return -ENOMEM; smsdev->func = func; memset(¶ms, 0, sizeof(struct smsdevice_params_t)); params.device = &func->dev; params.buffer_size = 0x5000; /* ?? */ params.num_buffers = 22; /* ?? */ params.context = smsdev; snprintf(params.devpath, sizeof(params.devpath), "sdio\\%s", sdio_func_id(func)); params.sendrequest_handler = smssdio_sendrequest; params.device_type = sms_get_board(board_id)->type; if (params.device_type != SMS_STELLAR) params.flags |= SMS_DEVICE_FAMILY2; else { /* * FIXME: Stellar needs special handling... */ ret = -ENODEV; goto free; } ret = smscore_register_device(¶ms, &smsdev->coredev, GFP_DMA, NULL); if (ret < 0) goto free; smscore_set_board_id(smsdev->coredev, board_id); sdio_claim_host(func); ret = sdio_enable_func(func); if (ret) goto release; ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE); if (ret) goto disable; ret = sdio_claim_irq(func, smssdio_interrupt); if (ret) goto disable; sdio_set_drvdata(func, smsdev); sdio_release_host(func); ret = smscore_start_device(smsdev->coredev); if (ret < 0) goto reclaim; return 0; reclaim: sdio_claim_host(func); sdio_release_irq(func); disable: sdio_disable_func(func); release: sdio_release_host(func); smscore_unregister_device(smsdev->coredev); free: kfree(smsdev); return ret; } static void smssdio_remove(struct sdio_func *func) { struct smssdio_device *smsdev; smsdev = sdio_get_drvdata(func); /* FIXME: racy! */ if (smsdev->split_cb) smscore_putbuffer(smsdev->coredev, smsdev->split_cb); smscore_unregister_device(smsdev->coredev); sdio_claim_host(func); sdio_release_irq(func); sdio_disable_func(func); sdio_release_host(func); kfree(smsdev); } static struct sdio_driver smssdio_driver = { .name = "smssdio", .id_table = smssdio_ids, .probe = smssdio_probe, .remove = smssdio_remove, }; /*******************************************************************/ /* Module functions */ /*******************************************************************/ static int __init smssdio_module_init(void) { int ret = 0; printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n"); printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n"); ret = sdio_register_driver(&smssdio_driver); return ret; } static void __exit smssdio_module_exit(void) { sdio_unregister_driver(&smssdio_driver); } module_init(smssdio_module_init); module_exit(smssdio_module_exit); MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver"); MODULE_AUTHOR("Pierre Ossman"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1