| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Eric Moore | 425 | 56.89% | 4 | 57.14% |
| James Bottomley | 305 | 40.83% | 1 | 14.29% |
| Kashyap Desai | 16 | 2.14% | 1 | 14.29% |
| Greg Kroah-Hartman | 1 | 0.13% | 1 | 14.29% |
| Total | 747 | 7 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2004-2008 LSI Corporation. * * * Name: mpi_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * * mpi_sas.h Version: 01.05.05 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 08-19-04 01.05.01 Original release. * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, * and Remove Device operations to SAS IO Unit Control. * Added DevHandle field to SAS IO Unit Control request and * reply. * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO * Unit Control request. * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER, * including adding IOCParameter and IOCParameter value * fields to SAS IO Unit Control Request. * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define. * -------------------------------------------------------------------------- */ #ifndef MPI_SAS_H #define MPI_SAS_H /* * Values for SASStatus. */ #define MPI_SASSTATUS_SUCCESS (0x00) #define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) #define MPI_SASSTATUS_INVALID_FRAME (0x02) #define MPI_SASSTATUS_UTC_BAD_DEST (0x03) #define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) #define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) #define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) #define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) #define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) #define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) #define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) #define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) #define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) #define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) #define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) #define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) #define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) #define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) #define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) #define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) #define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) /* * Values for the SAS DeviceInfo field used in SAS Device Status Change Event * data and SAS IO Unit Configuration pages. */ #define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000) #define MPI_SAS_DEVICE_INFO_SEP (0x00004000) #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) #define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) #define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) #define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) #define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) #define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) #define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) #define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) #define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) #define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) #define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) #define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) #define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) #define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) #define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) /***************************************************************************** * * S e r i a l A t t a c h e d S C S I M e s s a g e s * *****************************************************************************/ /****************************************************************************/ /* Serial Management Protocol Passthrough Request */ /****************************************************************************/ typedef struct _MSG_SMP_PASSTHROUGH_REQUEST { U8 PassthroughFlags; /* 00h */ U8 PhysicalPort; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 RequestDataLength; /* 04h */ U8 ConnectionRate; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Reserved1; /* 0Ch */ U64 SASAddress; /* 10h */ U32 Reserved2; /* 18h */ U32 Reserved3; /* 1Ch */ SGE_SIMPLE_UNION SGL; /* 20h */ } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; /* values for PassthroughFlags field */ #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) /* values for ConnectionRate field */ #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) /* Serial Management Protocol Passthrough Reply */ typedef struct _MSG_SMP_PASSTHROUGH_REPLY { U8 PassthroughFlags; /* 00h */ U8 PhysicalPort; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 ResponseDataLength; /* 04h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2; /* 0Ch */ U8 SASStatus; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 Reserved3; /* 14h */ U8 ResponseData[4]; /* 18h */ } MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) /****************************************************************************/ /* SATA Passthrough Request */ /****************************************************************************/ typedef struct _MSG_SATA_PASSTHROUGH_REQUEST { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 PassthroughFlags; /* 04h */ U8 ConnectionRate; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 Reserved1; /* 0Ch */ U32 Reserved2; /* 10h */ U32 Reserved3; /* 14h */ U32 DataLength; /* 18h */ U8 CommandFIS[20]; /* 1Ch */ SGE_SIMPLE_UNION SGL; /* 30h */ } MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; /* values for PassthroughFlags field */ #define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) #define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) #define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) #define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) #define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) #define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) #define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) #define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) #define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) /* values for ConnectionRate field */ #define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) /* SATA Passthrough Reply */ typedef struct _MSG_SATA_PASSTHROUGH_REPLY { U8 TargetID; /* 00h */ U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 PassthroughFlags; /* 04h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2; /* 0Ch */ U8 SASStatus; /* 0Dh */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U8 StatusFIS[20]; /* 14h */ U32 StatusControlRegisters; /* 28h */ U32 TransferCount; /* 2Ch */ } MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; /****************************************************************************/ /* SAS IO Unit Control Request */ /****************************************************************************/ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST { U8 Operation; /* 00h */ U8 Reserved1; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U16 DevHandle; /* 04h */ U8 IOCParameter; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 TargetID; /* 0Ch */ U8 Bus; /* 0Dh */ U8 PhyNum; /* 0Eh */ U8 PrimFlags; /* 0Fh */ U32 Primitive; /* 10h */ U64 SASAddress; /* 14h */ U32 IOCParameterValue; /* 1Ch */ } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; /* values for the Operation field */ #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) #define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI_SAS_OP_PHY_LINK_RESET (0x06) #define MPI_SAS_OP_PHY_HARD_RESET (0x07) #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI_SAS_OP_MAP_CURRENT (0x09) #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) #define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */ #define MPI_SAS_OP_REMOVE_DEVICE (0x0D) #define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E) #define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) #define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) #define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) /* SAS IO Unit Control Reply */ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY { U8 Operation; /* 00h */ U8 Reserved1; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ U16 DevHandle; /* 04h */ U8 IOCParameter; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U16 Reserved4; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ } MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1