Contributors: 9
Author Tokens Token Proportion Commits Commit Proportion
Mika Westerberg 1304 93.41% 2 16.67%
Andy Shevchenko 46 3.30% 2 16.67%
Jingoo Han 14 1.00% 2 16.67%
Pasi Savanainen 13 0.93% 1 8.33%
Thierry Reding 11 0.79% 1 8.33%
Mark Brown 4 0.29% 1 8.33%
Paul Gortmaker 2 0.14% 1 8.33%
Antonio Ospite 1 0.07% 1 8.33%
Geert Uytterhoeven 1 0.07% 1 8.33%
Total 1396 12


// SPDX-License-Identifier: GPL-2.0
/*
 * Driver for Intel MSIC
 *
 * Copyright (C) 2011, Intel Corporation
 * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
 */

#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel_msic.h>
#include <linux/platform_device.h>
#include <linux/slab.h>

#include <asm/intel_scu_ipc.h>

#define MSIC_VENDOR(id)		((id >> 6) & 3)
#define MSIC_VERSION(id)	(id & 0x3f)
#define MSIC_MAJOR(id)		('A' + ((id >> 3) & 7))
#define MSIC_MINOR(id)		(id & 7)

/*
 * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
 * Since IRQ block starts from address 0x002 we need to subtract that from
 * the actual IRQ status register address.
 */
#define MSIC_IRQ_STATUS(x)	(INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
#define MSIC_IRQ_STATUS_ACCDET	MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)

/*
 * The SCU hardware has limitation of 16 bytes per read/write buffer on
 * Medfield.
 */
#define SCU_IPC_RWBUF_LIMIT	16

/**
 * struct intel_msic - an MSIC MFD instance
 * @pdev: pointer to the platform device
 * @vendor: vendor ID
 * @version: chip version
 * @irq_base: base address of the mapped MSIC SRAM interrupt tree
 */
struct intel_msic {
	struct platform_device		*pdev;
	unsigned			vendor;
	unsigned			version;
	void __iomem			*irq_base;
};

static struct resource msic_touch_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_adc_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_battery_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_gpio_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_audio_resources[] = {
	DEFINE_RES_IRQ_NAMED(0, "IRQ"),
	/*
	 * We will pass IRQ_BASE to the driver now but this can be removed
	 * when/if the driver starts to use intel_msic_irq_read().
	 */
	DEFINE_RES_MEM_NAMED(MSIC_IRQ_STATUS_ACCDET, 1, "IRQ_BASE"),
};

static struct resource msic_hdmi_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_thermal_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_power_btn_resources[] = {
	DEFINE_RES_IRQ(0),
};

static struct resource msic_ocd_resources[] = {
	DEFINE_RES_IRQ(0),
};

/*
 * Devices that are part of the MSIC and are available via firmware
 * populated SFI DEVS table.
 */
static struct mfd_cell msic_devs[] = {
	[INTEL_MSIC_BLOCK_TOUCH]	= {
		.name			= "msic_touch",
		.num_resources		= ARRAY_SIZE(msic_touch_resources),
		.resources		= msic_touch_resources,
	},
	[INTEL_MSIC_BLOCK_ADC]		= {
		.name			= "msic_adc",
		.num_resources		= ARRAY_SIZE(msic_adc_resources),
		.resources		= msic_adc_resources,
	},
	[INTEL_MSIC_BLOCK_BATTERY]	= {
		.name			= "msic_battery",
		.num_resources		= ARRAY_SIZE(msic_battery_resources),
		.resources		= msic_battery_resources,
	},
	[INTEL_MSIC_BLOCK_GPIO]		= {
		.name			= "msic_gpio",
		.num_resources		= ARRAY_SIZE(msic_gpio_resources),
		.resources		= msic_gpio_resources,
	},
	[INTEL_MSIC_BLOCK_AUDIO]	= {
		.name			= "msic_audio",
		.num_resources		= ARRAY_SIZE(msic_audio_resources),
		.resources		= msic_audio_resources,
	},
	[INTEL_MSIC_BLOCK_HDMI]		= {
		.name			= "msic_hdmi",
		.num_resources		= ARRAY_SIZE(msic_hdmi_resources),
		.resources		= msic_hdmi_resources,
	},
	[INTEL_MSIC_BLOCK_THERMAL]	= {
		.name			= "msic_thermal",
		.num_resources		= ARRAY_SIZE(msic_thermal_resources),
		.resources		= msic_thermal_resources,
	},
	[INTEL_MSIC_BLOCK_POWER_BTN]	= {
		.name			= "msic_power_btn",
		.num_resources		= ARRAY_SIZE(msic_power_btn_resources),
		.resources		= msic_power_btn_resources,
	},
	[INTEL_MSIC_BLOCK_OCD]		= {
		.name			= "msic_ocd",
		.num_resources		= ARRAY_SIZE(msic_ocd_resources),
		.resources		= msic_ocd_resources,
	},
};

/*
 * Other MSIC related devices which are not directly available via SFI DEVS
 * table. These can be pseudo devices, regulators etc. which are needed for
 * different purposes.
 *
 * These devices appear only after the MSIC driver itself is initialized so
 * we can guarantee that the SCU IPC interface is ready.
 */
static const struct mfd_cell msic_other_devs[] = {
	/* Audio codec in the MSIC */
	{
		.id			= -1,
		.name			= "sn95031",
	},
};

/**
 * intel_msic_reg_read - read a single MSIC register
 * @reg: register to read
 * @val: register value is placed here
 *
 * Read a single register from MSIC. Returns %0 on success and negative
 * errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_read(unsigned short reg, u8 *val)
{
	return intel_scu_ipc_ioread8(reg, val);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_read);

/**
 * intel_msic_reg_write - write a single MSIC register
 * @reg: register to write
 * @val: value to write to that register
 *
 * Write a single MSIC register. Returns 0 on success and negative
 * errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_write(unsigned short reg, u8 val)
{
	return intel_scu_ipc_iowrite8(reg, val);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_write);

/**
 * intel_msic_reg_update - update a single MSIC register
 * @reg: register to update
 * @val: value to write to the register
 * @mask: specifies which of the bits are updated (%0 = don't update,
 *        %1 = update)
 *
 * Perform an update to a register @reg. @mask is used to specify which
 * bits are updated. Returns %0 in case of success and negative errno in
 * case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
{
	return intel_scu_ipc_update_register(reg, val, mask);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_update);

/**
 * intel_msic_bulk_read - read an array of registers
 * @reg: array of register addresses to read
 * @buf: array where the read values are placed
 * @count: number of registers to read
 *
 * Function reads @count registers from the MSIC using addresses passed in
 * @reg. Read values are placed in @buf. Reads are performed atomically
 * wrt. MSIC.
 *
 * Returns %0 in case of success and negative errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
{
	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
		return -EINVAL;

	return intel_scu_ipc_readv(reg, buf, count);
}
EXPORT_SYMBOL_GPL(intel_msic_bulk_read);

/**
 * intel_msic_bulk_write - write an array of values to the MSIC registers
 * @reg: array of registers to write
 * @buf: values to write to each register
 * @count: number of registers to write
 *
 * Function writes @count registers in @buf to MSIC. Writes are performed
 * atomically wrt MSIC. Returns %0 in case of success and negative errno in
 * case of failure.
 *
 * Function may sleep.
 */
int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
{
	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
		return -EINVAL;

	return intel_scu_ipc_writev(reg, buf, count);
}
EXPORT_SYMBOL_GPL(intel_msic_bulk_write);

/**
 * intel_msic_irq_read - read a register from an MSIC interrupt tree
 * @msic: MSIC instance
 * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
 *	 %INTEL_MSIC_RESETIRQ2)
 * @val: value of the register is placed here
 *
 * This function can be used by an MSIC subdevice interrupt handler to read
 * a register value from the MSIC interrupt tree. In this way subdevice
 * drivers don't have to map in the interrupt tree themselves but can just
 * call this function instead.
 *
 * Function doesn't sleep and is callable from interrupt context.
 *
 * Returns %-EINVAL if @reg is outside of the allowed register region.
 */
int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
{
	if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
		return -EINVAL;

	*val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
	return 0;
}
EXPORT_SYMBOL_GPL(intel_msic_irq_read);

static int intel_msic_init_devices(struct intel_msic *msic)
{
	struct platform_device *pdev = msic->pdev;
	struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
	int ret, i;

	if (pdata->gpio) {
		struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];

		cell->platform_data = pdata->gpio;
		cell->pdata_size = sizeof(*pdata->gpio);
	}

	if (pdata->ocd) {
		unsigned gpio = pdata->ocd->gpio;

		ret = devm_gpio_request_one(&pdev->dev, gpio,
					GPIOF_IN, "ocd_gpio");
		if (ret) {
			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
			return ret;
		}

		ret = gpio_to_irq(gpio);
		if (ret < 0) {
			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
			return ret;
		}

		/* Update the IRQ number for the OCD */
		pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
	}

	for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
		if (!pdata->irq[i])
			continue;

		ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
				      pdata->irq[i], NULL);
		if (ret)
			goto fail;
	}

	ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
			      ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
	if (ret)
		goto fail;

	return 0;

fail:
	mfd_remove_devices(&pdev->dev);

	return ret;
}

static void intel_msic_remove_devices(struct intel_msic *msic)
{
	struct platform_device *pdev = msic->pdev;

	mfd_remove_devices(&pdev->dev);
}

static int intel_msic_probe(struct platform_device *pdev)
{
	struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
	struct intel_msic *msic;
	struct resource *res;
	u8 id0, id1;
	int ret;

	if (!pdata) {
		dev_err(&pdev->dev, "no platform data passed\n");
		return -EINVAL;
	}

	/* First validate that we have an MSIC in place */
	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
	if (ret) {
		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
		return -ENXIO;
	}

	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
	if (ret) {
		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
		return -ENXIO;
	}

	if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
		dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
		return -ENXIO;
	}

	msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
	if (!msic)
		return -ENOMEM;

	msic->vendor = MSIC_VENDOR(id0);
	msic->version = MSIC_VERSION(id0);
	msic->pdev = pdev;

	/*
	 * Map in the MSIC interrupt tree area in SRAM. This is exposed to
	 * the clients via intel_msic_irq_read().
	 */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(msic->irq_base))
		return PTR_ERR(msic->irq_base);

	platform_set_drvdata(pdev, msic);

	ret = intel_msic_init_devices(msic);
	if (ret) {
		dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
		return ret;
	}

	dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
		 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
		 msic->vendor);

	return 0;
}

static int intel_msic_remove(struct platform_device *pdev)
{
	struct intel_msic *msic = platform_get_drvdata(pdev);

	intel_msic_remove_devices(msic);

	return 0;
}

static struct platform_driver intel_msic_driver = {
	.probe		= intel_msic_probe,
	.remove		= intel_msic_remove,
	.driver		= {
		.name	= "intel_msic",
	},
};
builtin_platform_driver(intel_msic_driver);