| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ben Chuang | 1511 | 100.00% | 4 | 100.00% |
| Total | 1511 | 4 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2019 Genesys Logic, Inc. * * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw> * * Version: v0.9.0 (2019-08-08) */ #include <linux/bitfield.h> #include <linux/bits.h> #include <linux/pci.h> #include <linux/mmc/mmc.h> #include <linux/delay.h> #include "sdhci.h" #include "sdhci-pci.h" /* Genesys Logic extra registers */ #define SDHCI_GLI_9750_WT 0x800 #define SDHCI_GLI_9750_WT_EN BIT(0) #define GLI_9750_WT_EN_ON 0x1 #define GLI_9750_WT_EN_OFF 0x0 #define SDHCI_GLI_9750_DRIVING 0x860 #define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0) #define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26) #define GLI_9750_DRIVING_1_VALUE 0xFFF #define GLI_9750_DRIVING_2_VALUE 0x3 #define SDHCI_GLI_9750_SEL_1 BIT(29) #define SDHCI_GLI_9750_SEL_2 BIT(31) #define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30)) #define SDHCI_GLI_9750_PLL 0x864 #define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) #define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) #define GLI_9750_PLL_TX2_INV_VALUE 0x1 #define GLI_9750_PLL_TX2_DLY_VALUE 0x0 #define SDHCI_GLI_9750_SW_CTRL 0x874 #define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) #define GLI_9750_SW_CTRL_4_VALUE 0x3 #define SDHCI_GLI_9750_MISC 0x878 #define SDHCI_GLI_9750_MISC_TX1_INV BIT(2) #define SDHCI_GLI_9750_MISC_RX_INV BIT(3) #define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4) #define GLI_9750_MISC_TX1_INV_VALUE 0x0 #define GLI_9750_MISC_RX_INV_ON 0x1 #define GLI_9750_MISC_RX_INV_OFF 0x0 #define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF #define GLI_9750_MISC_TX1_DLY_VALUE 0x5 #define SDHCI_GLI_9750_TUNING_CONTROL 0x540 #define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4) #define GLI_9750_TUNING_CONTROL_EN_ON 0x1 #define GLI_9750_TUNING_CONTROL_EN_OFF 0x0 #define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16) #define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19) #define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1 #define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2 #define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544 #define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) #define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 #define GLI_MAX_TUNING_LOOP 40 /* Genesys Logic chipset */ static inline void gl9750_wt_on(struct sdhci_host *host) { u32 wt_value; u32 wt_enable; wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); if (wt_enable == GLI_9750_WT_EN_ON) return; wt_value &= ~SDHCI_GLI_9750_WT_EN; wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON); sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); } static inline void gl9750_wt_off(struct sdhci_host *host) { u32 wt_value; u32 wt_enable; wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); if (wt_enable == GLI_9750_WT_EN_OFF) return; wt_value &= ~SDHCI_GLI_9750_WT_EN; wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF); sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); } static void gli_set_9750(struct sdhci_host *host) { u32 driving_value; u32 pll_value; u32 sw_ctrl_value; u32 misc_value; u32 parameter_value; u32 control_value; u16 ctrl2; gl9750_wt_on(host); driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING); pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL); sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL); misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS); control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL); driving_value &= ~(SDHCI_GLI_9750_DRIVING_1); driving_value &= ~(SDHCI_GLI_9750_DRIVING_2); driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1, GLI_9750_DRIVING_1_VALUE); driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2, GLI_9750_DRIVING_2_VALUE); driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST); driving_value |= SDHCI_GLI_9750_SEL_2; sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING); sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4; sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4, GLI_9750_SW_CTRL_4_VALUE); sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL); /* reset the tuning flow after reinit and before starting tuning */ pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV; pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY; pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV, GLI_9750_PLL_TX2_INV_VALUE); pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY, GLI_9750_PLL_TX2_DLY_VALUE); misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV; misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY; misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV, GLI_9750_MISC_TX1_INV_VALUE); misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, GLI_9750_MISC_RX_INV_VALUE); misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY, GLI_9750_MISC_TX1_DLY_VALUE); parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY; parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY, GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE); control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1; control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2; control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1, GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE); control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2, GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE); sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL); sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); /* disable tuned clk */ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); /* enable tuning parameters control */ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, GLI_9750_TUNING_CONTROL_EN_ON); sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); /* write tuning parameters */ sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS); /* disable tuning parameters control */ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, GLI_9750_TUNING_CONTROL_EN_OFF); sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); /* clear tuned clk */ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); gl9750_wt_off(host); } static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b) { u32 misc_value; gl9750_wt_on(host); misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; if (b) { misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, GLI_9750_MISC_RX_INV_ON); } else { misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, GLI_9750_MISC_RX_INV_OFF); } sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); gl9750_wt_off(host); } static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode) { int i; int rx_inv; for (rx_inv = 0; rx_inv < 2; rx_inv++) { gli_set_9750_rx_inv(host, !!rx_inv); sdhci_start_tuning(host); for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) { u16 ctrl; sdhci_send_tuning(host, opcode); if (!host->tuning_done) { sdhci_abort_tuning(host, opcode); break; } ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { if (ctrl & SDHCI_CTRL_TUNED_CLK) return 0; /* Success! */ break; } } } if (!host->tuning_done) { pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", mmc_hostname(host->mmc)); return -ETIMEDOUT; } pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", mmc_hostname(host->mmc)); sdhci_reset_tuning(host); return -EAGAIN; } static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) { host->mmc->retune_period = 0; if (host->tuning_mode == SDHCI_TUNING_MODE_1) host->mmc->retune_period = host->tuning_count; gli_set_9750(host); host->tuning_err = __sdhci_execute_tuning_9750(host, opcode); sdhci_end_tuning(host); return 0; } static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot) { int ret; ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (ret < 0) { pr_warn("%s: enable PCI MSI failed, error=%d\n", mmc_hostname(slot->host->mmc), ret); return; } slot->host->irq = pci_irq_vector(slot->chip->pdev, 0); } static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; gli_pcie_enable_msi(slot); slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; sdhci_enable_v4_mode(host); return 0; } static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; gli_pcie_enable_msi(slot); slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; sdhci_enable_v4_mode(host); return 0; } static void sdhci_gli_voltage_switch(struct sdhci_host *host) { /* * According to Section 3.6.1 signal voltage switch procedure in * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as * follows: * (6) Set 1.8V Signal Enable in the Host Control 2 register. * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this * period. * (8) If 1.8V Signal Enable is cleared by Host Controller, go to * step (12). * * Wait 5ms after set 1.8V signal enable in Host Control 2 register * to ensure 1.8V signal enable bit is set by GL9750/GL9755. */ usleep_range(5000, 5500); } static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) { sdhci_reset(host, mask); gli_set_9750(host); } static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) { u32 value; value = readl(host->ioaddr + reg); if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff))) value |= 0xc8; return value; } #ifdef CONFIG_PM_SLEEP static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip) { struct sdhci_pci_slot *slot = chip->slots[0]; pci_free_irq_vectors(slot->chip->pdev); gli_pcie_enable_msi(slot); return sdhci_pci_resume_host(chip); } #endif static const struct sdhci_ops sdhci_gl9755_ops = { .set_clock = sdhci_set_clock, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .voltage_switch = sdhci_gli_voltage_switch, }; const struct sdhci_pci_fixes sdhci_gl9755 = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, .probe_slot = gli_probe_slot_gl9755, .ops = &sdhci_gl9755_ops, #ifdef CONFIG_PM_SLEEP .resume = sdhci_pci_gli_resume, #endif }; static const struct sdhci_ops sdhci_gl9750_ops = { .read_l = sdhci_gl9750_readl, .set_clock = sdhci_set_clock, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_gl9750_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .voltage_switch = sdhci_gli_voltage_switch, .platform_execute_tuning = gl9750_execute_tuning, }; const struct sdhci_pci_fixes sdhci_gl9750 = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, .probe_slot = gli_probe_slot_gl9750, .ops = &sdhci_gl9750_ops, #ifdef CONFIG_PM_SLEEP .resume = sdhci_pci_gli_resume, #endif };
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1