Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ryan Mallon | 1839 | 89.19% | 2 | 11.11% |
H Hartley Sweeten | 161 | 7.81% | 1 | 5.56% |
Artem B. Bityutskiy | 13 | 0.63% | 2 | 11.11% |
Jiri Slaby | 10 | 0.48% | 1 | 5.56% |
Sachin Kamat | 9 | 0.44% | 1 | 5.56% |
Dmitry Eremin-Solenikov | 7 | 0.34% | 1 | 5.56% |
Jingoo Han | 6 | 0.29% | 2 | 11.11% |
Alexey Dobriyan | 3 | 0.15% | 1 | 5.56% |
Frans Klaver | 3 | 0.15% | 1 | 5.56% |
Tejun Heo | 3 | 0.15% | 1 | 5.56% |
Jamie Iles | 2 | 0.10% | 1 | 5.56% |
Thomas Gleixner | 2 | 0.10% | 1 | 5.56% |
Axel Lin | 2 | 0.10% | 1 | 5.56% |
Brian Norris | 1 | 0.05% | 1 | 5.56% |
Rafał Miłecki | 1 | 0.05% | 1 | 5.56% |
Total | 2062 | 18 |
// SPDX-License-Identifier: GPL-2.0-only /* * sst25l.c * * Driver for SST25L SPI Flash chips * * Copyright © 2009 Bluewater Systems Ltd * Author: Andre Renaud <andre@bluewatersys.com> * Author: Ryan Mallon * * Based on m25p80.c */ #include <linux/module.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/sched.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> /* Erases can take up to 3 seconds! */ #define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000) #define SST25L_CMD_WRSR 0x01 /* Write status register */ #define SST25L_CMD_WRDI 0x04 /* Write disable */ #define SST25L_CMD_RDSR 0x05 /* Read status register */ #define SST25L_CMD_WREN 0x06 /* Write enable */ #define SST25L_CMD_READ 0x03 /* High speed read */ #define SST25L_CMD_EWSR 0x50 /* Enable write status register */ #define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */ #define SST25L_CMD_READ_ID 0x90 /* Read device ID */ #define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */ #define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */ #define SST25L_STATUS_WREN (1 << 1) /* Write enabled */ #define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */ #define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */ struct sst25l_flash { struct spi_device *spi; struct mutex lock; struct mtd_info mtd; }; struct flash_info { const char *name; uint16_t device_id; unsigned page_size; unsigned nr_pages; unsigned erase_size; }; #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) static struct flash_info sst25l_flash_info[] = { {"sst25lf020a", 0xbf43, 256, 1024, 4096}, {"sst25lf040a", 0xbf44, 256, 2048, 4096}, }; static int sst25l_status(struct sst25l_flash *flash, int *status) { struct spi_message m; struct spi_transfer t; unsigned char cmd_resp[2]; int err; spi_message_init(&m); memset(&t, 0, sizeof(struct spi_transfer)); cmd_resp[0] = SST25L_CMD_RDSR; cmd_resp[1] = 0xff; t.tx_buf = cmd_resp; t.rx_buf = cmd_resp; t.len = sizeof(cmd_resp); spi_message_add_tail(&t, &m); err = spi_sync(flash->spi, &m); if (err < 0) return err; *status = cmd_resp[1]; return 0; } static int sst25l_write_enable(struct sst25l_flash *flash, int enable) { unsigned char command[2]; int status, err; command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; err = spi_write(flash->spi, command, 1); if (err) return err; command[0] = SST25L_CMD_EWSR; err = spi_write(flash->spi, command, 1); if (err) return err; command[0] = SST25L_CMD_WRSR; command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; err = spi_write(flash->spi, command, 2); if (err) return err; if (enable) { err = sst25l_status(flash, &status); if (err) return err; if (!(status & SST25L_STATUS_WREN)) return -EROFS; } return 0; } static int sst25l_wait_till_ready(struct sst25l_flash *flash) { unsigned long deadline; int status, err; deadline = jiffies + MAX_READY_WAIT_JIFFIES; do { err = sst25l_status(flash, &status); if (err) return err; if (!(status & SST25L_STATUS_BUSY)) return 0; cond_resched(); } while (!time_after_eq(jiffies, deadline)); return -ETIMEDOUT; } static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) { unsigned char command[4]; int err; err = sst25l_write_enable(flash, 1); if (err) return err; command[0] = SST25L_CMD_SECTOR_ERASE; command[1] = offset >> 16; command[2] = offset >> 8; command[3] = offset; err = spi_write(flash->spi, command, 4); if (err) return err; err = sst25l_wait_till_ready(flash); if (err) return err; return sst25l_write_enable(flash, 0); } static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) { struct sst25l_flash *flash = to_sst25l_flash(mtd); uint32_t addr, end; int err; /* Sanity checks */ if ((uint32_t)instr->len % mtd->erasesize) return -EINVAL; if ((uint32_t)instr->addr % mtd->erasesize) return -EINVAL; addr = instr->addr; end = addr + instr->len; mutex_lock(&flash->lock); err = sst25l_wait_till_ready(flash); if (err) { mutex_unlock(&flash->lock); return err; } while (addr < end) { err = sst25l_erase_sector(flash, addr); if (err) { mutex_unlock(&flash->lock); dev_err(&flash->spi->dev, "Erase failed\n"); return err; } addr += mtd->erasesize; } mutex_unlock(&flash->lock); return 0; } static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, unsigned char *buf) { struct sst25l_flash *flash = to_sst25l_flash(mtd); struct spi_transfer transfer[2]; struct spi_message message; unsigned char command[4]; int ret; spi_message_init(&message); memset(&transfer, 0, sizeof(transfer)); command[0] = SST25L_CMD_READ; command[1] = from >> 16; command[2] = from >> 8; command[3] = from; transfer[0].tx_buf = command; transfer[0].len = sizeof(command); spi_message_add_tail(&transfer[0], &message); transfer[1].rx_buf = buf; transfer[1].len = len; spi_message_add_tail(&transfer[1], &message); mutex_lock(&flash->lock); /* Wait for previous write/erase to complete */ ret = sst25l_wait_till_ready(flash); if (ret) { mutex_unlock(&flash->lock); return ret; } spi_sync(flash->spi, &message); if (retlen && message.actual_length > sizeof(command)) *retlen += message.actual_length - sizeof(command); mutex_unlock(&flash->lock); return 0; } static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const unsigned char *buf) { struct sst25l_flash *flash = to_sst25l_flash(mtd); int i, j, ret, bytes, copied = 0; unsigned char command[5]; if ((uint32_t)to % mtd->writesize) return -EINVAL; mutex_lock(&flash->lock); ret = sst25l_write_enable(flash, 1); if (ret) goto out; for (i = 0; i < len; i += mtd->writesize) { ret = sst25l_wait_till_ready(flash); if (ret) goto out; /* Write the first byte of the page */ command[0] = SST25L_CMD_AAI_PROGRAM; command[1] = (to + i) >> 16; command[2] = (to + i) >> 8; command[3] = (to + i); command[4] = buf[i]; ret = spi_write(flash->spi, command, 5); if (ret < 0) goto out; copied++; /* * Write the remaining bytes using auto address * increment mode */ bytes = min_t(uint32_t, mtd->writesize, len - i); for (j = 1; j < bytes; j++, copied++) { ret = sst25l_wait_till_ready(flash); if (ret) goto out; command[1] = buf[i + j]; ret = spi_write(flash->spi, command, 2); if (ret) goto out; } } out: ret = sst25l_write_enable(flash, 0); if (retlen) *retlen = copied; mutex_unlock(&flash->lock); return ret; } static struct flash_info *sst25l_match_device(struct spi_device *spi) { struct flash_info *flash_info = NULL; struct spi_message m; struct spi_transfer t; unsigned char cmd_resp[6]; int i, err; uint16_t id; spi_message_init(&m); memset(&t, 0, sizeof(struct spi_transfer)); cmd_resp[0] = SST25L_CMD_READ_ID; cmd_resp[1] = 0; cmd_resp[2] = 0; cmd_resp[3] = 0; cmd_resp[4] = 0xff; cmd_resp[5] = 0xff; t.tx_buf = cmd_resp; t.rx_buf = cmd_resp; t.len = sizeof(cmd_resp); spi_message_add_tail(&t, &m); err = spi_sync(spi, &m); if (err < 0) { dev_err(&spi->dev, "error reading device id\n"); return NULL; } id = (cmd_resp[4] << 8) | cmd_resp[5]; for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) if (sst25l_flash_info[i].device_id == id) flash_info = &sst25l_flash_info[i]; if (!flash_info) dev_err(&spi->dev, "unknown id %.4x\n", id); return flash_info; } static int sst25l_probe(struct spi_device *spi) { struct flash_info *flash_info; struct sst25l_flash *flash; struct flash_platform_data *data; int ret; flash_info = sst25l_match_device(spi); if (!flash_info) return -ENODEV; flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; flash->spi = spi; mutex_init(&flash->lock); spi_set_drvdata(spi, flash); data = dev_get_platdata(&spi->dev); if (data && data->name) flash->mtd.name = data->name; flash->mtd.dev.parent = &spi->dev; flash->mtd.type = MTD_NORFLASH; flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.erasesize = flash_info->erase_size; flash->mtd.writesize = flash_info->page_size; flash->mtd.writebufsize = flash_info->page_size; flash->mtd.size = flash_info->page_size * flash_info->nr_pages; flash->mtd._erase = sst25l_erase; flash->mtd._read = sst25l_read; flash->mtd._write = sst25l_write; dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, (long long)flash->mtd.size >> 10); pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) " ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", flash->mtd.name, (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), flash->mtd.erasesize, flash->mtd.erasesize / 1024, flash->mtd.numeraseregions); ret = mtd_device_register(&flash->mtd, data ? data->parts : NULL, data ? data->nr_parts : 0); if (ret) return -ENODEV; return 0; } static int sst25l_remove(struct spi_device *spi) { struct sst25l_flash *flash = spi_get_drvdata(spi); return mtd_device_unregister(&flash->mtd); } static struct spi_driver sst25l_driver = { .driver = { .name = "sst25l", }, .probe = sst25l_probe, .remove = sst25l_remove, }; module_spi_driver(sst25l_driver); MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " "Ryan Mallon"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1