Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Iyappan Subramanian | 684 | 90.00% | 1 | 25.00% |
Andrew Lunn | 69 | 9.08% | 1 | 25.00% |
Wei Yongjun | 5 | 0.66% | 1 | 25.00% |
Thomas Gleixner | 2 | 0.26% | 1 | 25.00% |
Total | 760 | 4 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Applied Micro X-Gene SoC Ethernet v2 Driver * * Copyright (c) 2017, Applied Micro Circuits Corporation * Author(s): Iyappan Subramanian <isubramanian@apm.com> * Keyur Chudgar <kchudgar@apm.com> */ #include "main.h" static int xge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data) { struct xge_pdata *pdata = bus->priv; u32 done, val = 0; u8 wait = 10; SET_REG_BITS(&val, PHY_ADDR, phy_id); SET_REG_BITS(&val, REG_ADDR, reg); xge_wr_csr(pdata, MII_MGMT_ADDRESS, val); xge_wr_csr(pdata, MII_MGMT_CONTROL, data); do { usleep_range(5, 10); done = xge_rd_csr(pdata, MII_MGMT_INDICATORS); } while ((done & MII_MGMT_BUSY) && wait--); if (done & MII_MGMT_BUSY) { dev_err(&bus->dev, "MII_MGMT write failed\n"); return -ETIMEDOUT; } return 0; } static int xge_mdio_read(struct mii_bus *bus, int phy_id, int reg) { struct xge_pdata *pdata = bus->priv; u32 data, done, val = 0; u8 wait = 10; SET_REG_BITS(&val, PHY_ADDR, phy_id); SET_REG_BITS(&val, REG_ADDR, reg); xge_wr_csr(pdata, MII_MGMT_ADDRESS, val); xge_wr_csr(pdata, MII_MGMT_COMMAND, MII_READ_CYCLE); do { usleep_range(5, 10); done = xge_rd_csr(pdata, MII_MGMT_INDICATORS); } while ((done & MII_MGMT_BUSY) && wait--); if (done & MII_MGMT_BUSY) { dev_err(&bus->dev, "MII_MGMT read failed\n"); return -ETIMEDOUT; } data = xge_rd_csr(pdata, MII_MGMT_STATUS); xge_wr_csr(pdata, MII_MGMT_COMMAND, 0); return data; } static void xge_adjust_link(struct net_device *ndev) { struct xge_pdata *pdata = netdev_priv(ndev); struct phy_device *phydev = ndev->phydev; if (phydev->link) { if (pdata->phy_speed != phydev->speed) { pdata->phy_speed = phydev->speed; xge_mac_set_speed(pdata); xge_mac_enable(pdata); phy_print_status(phydev); } } else { if (pdata->phy_speed != SPEED_UNKNOWN) { pdata->phy_speed = SPEED_UNKNOWN; xge_mac_disable(pdata); phy_print_status(phydev); } } } void xge_mdio_remove(struct net_device *ndev) { struct xge_pdata *pdata = netdev_priv(ndev); struct mii_bus *mdio_bus = pdata->mdio_bus; if (ndev->phydev) phy_disconnect(ndev->phydev); if (mdio_bus->state == MDIOBUS_REGISTERED) mdiobus_unregister(mdio_bus); mdiobus_free(mdio_bus); } int xge_mdio_config(struct net_device *ndev) { __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; struct xge_pdata *pdata = netdev_priv(ndev); struct device *dev = &pdata->pdev->dev; struct mii_bus *mdio_bus; struct phy_device *phydev; int ret; mdio_bus = mdiobus_alloc(); if (!mdio_bus) return -ENOMEM; mdio_bus->name = "APM X-Gene Ethernet (v2) MDIO Bus"; mdio_bus->read = xge_mdio_read; mdio_bus->write = xge_mdio_write; mdio_bus->priv = pdata; mdio_bus->parent = dev; snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev)); pdata->mdio_bus = mdio_bus; mdio_bus->phy_mask = 0x1; ret = mdiobus_register(mdio_bus); if (ret) goto err; phydev = phy_find_first(mdio_bus); if (!phydev) { dev_err(dev, "no PHY found\n"); ret = -ENODEV; goto err; } phydev = phy_connect(ndev, phydev_name(phydev), &xge_adjust_link, pdata->resources.phy_mode); if (IS_ERR(phydev)) { netdev_err(ndev, "Could not attach to PHY\n"); ret = PTR_ERR(phydev); goto err; } linkmode_set_bit_array(phy_10_100_features_array, ARRAY_SIZE(phy_10_100_features_array), mask); linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, mask); linkmode_set_bit(ETHTOOL_LINK_MODE_AUI_BIT, mask); linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, mask); linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, mask); linkmode_set_bit(ETHTOOL_LINK_MODE_BNC_BIT, mask); linkmode_andnot(phydev->supported, phydev->supported, mask); linkmode_copy(phydev->advertising, phydev->supported); pdata->phy_speed = SPEED_UNKNOWN; return 0; err: xge_mdio_remove(ndev); return ret; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1