Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Martin Blumenstingl | 1369 | 77.39% | 9 | 50.00% |
Yixun Lan | 314 | 17.75% | 1 | 5.56% |
Johan Hovold | 48 | 2.71% | 2 | 11.11% |
Heiner Kallweit | 14 | 0.79% | 1 | 5.56% |
Christophe Jaillet | 8 | 0.45% | 1 | 5.56% |
Andrew Lunn | 7 | 0.40% | 1 | 5.56% |
Marc Zyngier | 5 | 0.28% | 1 | 5.56% |
Yue haibing | 2 | 0.11% | 1 | 5.56% |
Thomas Gleixner | 2 | 0.11% | 1 | 5.56% |
Total | 1769 | 18 |
// SPDX-License-Identifier: GPL-2.0-only /* * Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer * * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/device.h> #include <linux/ethtool.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_net.h> #include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <linux/stmmac.h> #include "stmmac_platform.h" #define PRG_ETH0 0x0 #define PRG_ETH0_RGMII_MODE BIT(0) #define PRG_ETH0_EXT_PHY_MODE_MASK GENMASK(2, 0) #define PRG_ETH0_EXT_RGMII_MODE 1 #define PRG_ETH0_EXT_RMII_MODE 4 /* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */ #define PRG_ETH0_CLK_M250_SEL_SHIFT 4 #define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4) #define PRG_ETH0_TXDLY_SHIFT 5 #define PRG_ETH0_TXDLY_MASK GENMASK(6, 5) /* divider for the result of m250_sel */ #define PRG_ETH0_CLK_M250_DIV_SHIFT 7 #define PRG_ETH0_CLK_M250_DIV_WIDTH 3 #define PRG_ETH0_RGMII_TX_CLK_EN 10 #define PRG_ETH0_INVERTED_RMII_CLK BIT(11) #define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12) #define MUX_CLK_NUM_PARENTS 2 struct meson8b_dwmac; struct meson8b_dwmac_data { int (*set_phy_mode)(struct meson8b_dwmac *dwmac); }; struct meson8b_dwmac { struct device *dev; void __iomem *regs; const struct meson8b_dwmac_data *data; phy_interface_t phy_mode; struct clk *rgmii_tx_clk; u32 tx_delay_ns; }; struct meson8b_dwmac_clk_configs { struct clk_mux m250_mux; struct clk_divider m250_div; struct clk_fixed_factor fixed_div2; struct clk_gate rgmii_tx_en; }; static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg, u32 mask, u32 value) { u32 data; data = readl(dwmac->regs + reg); data &= ~mask; data |= (value & mask); writel(data, dwmac->regs + reg); } static struct clk *meson8b_dwmac_register_clk(struct meson8b_dwmac *dwmac, const char *name_suffix, const char **parent_names, int num_parents, const struct clk_ops *ops, struct clk_hw *hw) { struct clk_init_data init; char clk_name[32]; snprintf(clk_name, sizeof(clk_name), "%s#%s", dev_name(dwmac->dev), name_suffix); init.name = clk_name; init.ops = ops; init.flags = CLK_SET_RATE_PARENT; init.parent_names = parent_names; init.num_parents = num_parents; hw->init = &init; return devm_clk_register(dwmac->dev, hw); } static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac) { int i, ret; struct clk *clk; struct device *dev = dwmac->dev; const char *parent_name, *mux_parent_names[MUX_CLK_NUM_PARENTS]; struct meson8b_dwmac_clk_configs *clk_configs; static const struct clk_div_table div_table[] = { { .div = 2, .val = 2, }, { .div = 3, .val = 3, }, { .div = 4, .val = 4, }, { .div = 5, .val = 5, }, { .div = 6, .val = 6, }, { .div = 7, .val = 7, }, { /* end of array */ } }; clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL); if (!clk_configs) return -ENOMEM; /* get the mux parents from DT */ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { char name[16]; snprintf(name, sizeof(name), "clkin%d", i); clk = devm_clk_get(dev, name); if (IS_ERR(clk)) { ret = PTR_ERR(clk); if (ret != -EPROBE_DEFER) dev_err(dev, "Missing clock %s\n", name); return ret; } mux_parent_names[i] = __clk_get_name(clk); } clk_configs->m250_mux.reg = dwmac->regs + PRG_ETH0; clk_configs->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT; clk_configs->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK; clk = meson8b_dwmac_register_clk(dwmac, "m250_sel", mux_parent_names, MUX_CLK_NUM_PARENTS, &clk_mux_ops, &clk_configs->m250_mux.hw); if (WARN_ON(IS_ERR(clk))) return PTR_ERR(clk); parent_name = __clk_get_name(clk); clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0; clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT; clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH; clk_configs->m250_div.table = div_table; clk_configs->m250_div.flags = CLK_DIVIDER_ALLOW_ZERO | CLK_DIVIDER_ROUND_CLOSEST; clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1, &clk_divider_ops, &clk_configs->m250_div.hw); if (WARN_ON(IS_ERR(clk))) return PTR_ERR(clk); parent_name = __clk_get_name(clk); clk_configs->fixed_div2.mult = 1; clk_configs->fixed_div2.div = 2; clk = meson8b_dwmac_register_clk(dwmac, "fixed_div2", &parent_name, 1, &clk_fixed_factor_ops, &clk_configs->fixed_div2.hw); if (WARN_ON(IS_ERR(clk))) return PTR_ERR(clk); parent_name = __clk_get_name(clk); clk_configs->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0; clk_configs->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN; clk = meson8b_dwmac_register_clk(dwmac, "rgmii_tx_en", &parent_name, 1, &clk_gate_ops, &clk_configs->rgmii_tx_en.hw); if (WARN_ON(IS_ERR(clk))) return PTR_ERR(clk); dwmac->rgmii_tx_clk = clk; return 0; } static int meson8b_set_phy_mode(struct meson8b_dwmac *dwmac) { switch (dwmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_TXID: /* enable RGMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE, PRG_ETH0_RGMII_MODE); break; case PHY_INTERFACE_MODE_RMII: /* disable RGMII mode -> enables RMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE, 0); break; default: dev_err(dwmac->dev, "fail to set phy-mode %s\n", phy_modes(dwmac->phy_mode)); return -EINVAL; } return 0; } static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac) { switch (dwmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_TXID: /* enable RGMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_EXT_PHY_MODE_MASK, PRG_ETH0_EXT_RGMII_MODE); break; case PHY_INTERFACE_MODE_RMII: /* disable RGMII mode -> enables RMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_EXT_PHY_MODE_MASK, PRG_ETH0_EXT_RMII_MODE); break; default: dev_err(dwmac->dev, "fail to set phy-mode %s\n", phy_modes(dwmac->phy_mode)); return -EINVAL; } return 0; } static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac) { int ret; u8 tx_dly_val = 0; switch (dwmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_RXID: /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where * 8ns are exactly one cycle of the 125MHz RGMII TX clock): * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3 */ tx_dly_val = dwmac->tx_delay_ns >> 1; /* fall through */ case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_TXID: /* only relevant for RMII mode -> disable in RGMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_INVERTED_RMII_CLK, 0); meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK, tx_dly_val << PRG_ETH0_TXDLY_SHIFT); /* Configure the 125MHz RGMII TX clock, the IP block changes * the output automatically (= without us having to configure * a register) based on the line-speed (125MHz for Gbit speeds, * 25MHz for 100Mbit/s and 2.5MHz for 10Mbit/s). */ ret = clk_set_rate(dwmac->rgmii_tx_clk, 125 * 1000 * 1000); if (ret) { dev_err(dwmac->dev, "failed to set RGMII TX clock\n"); return ret; } ret = clk_prepare_enable(dwmac->rgmii_tx_clk); if (ret) { dev_err(dwmac->dev, "failed to enable the RGMII TX clock\n"); return ret; } devm_add_action_or_reset(dwmac->dev, (void(*)(void *))clk_disable_unprepare, dwmac->rgmii_tx_clk); break; case PHY_INTERFACE_MODE_RMII: /* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_INVERTED_RMII_CLK, PRG_ETH0_INVERTED_RMII_CLK); /* TX clock delay cannot be configured in RMII mode */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK, 0); break; default: dev_err(dwmac->dev, "unsupported phy-mode %s\n", phy_modes(dwmac->phy_mode)); return -EINVAL; } /* enable TX_CLK and PHY_REF_CLK generator */ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK, PRG_ETH0_TX_AND_PHY_REF_CLK); return 0; } static int meson8b_dwmac_probe(struct platform_device *pdev) { struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct meson8b_dwmac *dwmac; int ret; ret = stmmac_get_platform_resources(pdev, &stmmac_res); if (ret) return ret; plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); if (IS_ERR(plat_dat)) return PTR_ERR(plat_dat); dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); if (!dwmac) { ret = -ENOMEM; goto err_remove_config_dt; } dwmac->data = (const struct meson8b_dwmac_data *) of_device_get_match_data(&pdev->dev); if (!dwmac->data) { ret = -EINVAL; goto err_remove_config_dt; } dwmac->regs = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(dwmac->regs)) { ret = PTR_ERR(dwmac->regs); goto err_remove_config_dt; } dwmac->dev = &pdev->dev; ret = of_get_phy_mode(pdev->dev.of_node, &dwmac->phy_mode); if (ret) { dev_err(&pdev->dev, "missing phy-mode property\n"); goto err_remove_config_dt; } /* use 2ns as fallback since this value was previously hardcoded */ if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns", &dwmac->tx_delay_ns)) dwmac->tx_delay_ns = 2; ret = meson8b_init_rgmii_tx_clk(dwmac); if (ret) goto err_remove_config_dt; ret = dwmac->data->set_phy_mode(dwmac); if (ret) goto err_remove_config_dt; ret = meson8b_init_prg_eth(dwmac); if (ret) goto err_remove_config_dt; plat_dat->bsp_priv = dwmac; ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (ret) goto err_remove_config_dt; return 0; err_remove_config_dt: stmmac_remove_config_dt(pdev, plat_dat); return ret; } static const struct meson8b_dwmac_data meson8b_dwmac_data = { .set_phy_mode = meson8b_set_phy_mode, }; static const struct meson8b_dwmac_data meson_axg_dwmac_data = { .set_phy_mode = meson_axg_set_phy_mode, }; static const struct of_device_id meson8b_dwmac_match[] = { { .compatible = "amlogic,meson8b-dwmac", .data = &meson8b_dwmac_data, }, { .compatible = "amlogic,meson8m2-dwmac", .data = &meson8b_dwmac_data, }, { .compatible = "amlogic,meson-gxbb-dwmac", .data = &meson8b_dwmac_data, }, { .compatible = "amlogic,meson-axg-dwmac", .data = &meson_axg_dwmac_data, }, { } }; MODULE_DEVICE_TABLE(of, meson8b_dwmac_match); static struct platform_driver meson8b_dwmac_driver = { .probe = meson8b_dwmac_probe, .remove = stmmac_pltfr_remove, .driver = { .name = "meson8b-dwmac", .pm = &stmmac_pltfr_pm_ops, .of_match_table = meson8b_dwmac_match, }, }; module_platform_driver(meson8b_dwmac_driver); MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); MODULE_DESCRIPTION("Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1