Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ben Hutchings | 1738 | 66.95% | 7 | 58.33% |
Philippe Reynes | 825 | 31.78% | 1 | 8.33% |
David Decotigny | 16 | 0.62% | 2 | 16.67% |
Nicolas Reinecke | 15 | 0.58% | 1 | 8.33% |
Thomas Gleixner | 2 | 0.08% | 1 | 8.33% |
Total | 2596 | 12 |
// SPDX-License-Identifier: GPL-2.0-only /* * mdio.c: Generic support for MDIO-compatible transceivers * Copyright 2006-2009 Solarflare Communications Inc. */ #include <linux/kernel.h> #include <linux/capability.h> #include <linux/errno.h> #include <linux/ethtool.h> #include <linux/mdio.h> #include <linux/module.h> MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers"); MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc."); MODULE_LICENSE("GPL"); /** * mdio45_probe - probe for an MDIO (clause 45) device * @mdio: MDIO interface * @prtad: Expected PHY address * * This sets @prtad and @mmds in the MDIO interface if successful. * Returns 0 on success, negative on error. */ int mdio45_probe(struct mdio_if_info *mdio, int prtad) { int mmd, stat2, devs1, devs2; /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY * XS or DTE XS; give up if none is present. */ for (mmd = 1; mmd <= 5; mmd++) { /* Is this MMD present? */ stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2); if (stat2 < 0 || (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) continue; /* It should tell us about all the other MMDs */ devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1); devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2); if (devs1 < 0 || devs2 < 0) continue; mdio->prtad = prtad; mdio->mmds = devs1 | (devs2 << 16); return 0; } return -ENODEV; } EXPORT_SYMBOL(mdio45_probe); /** * mdio_set_flag - set or clear flag in an MDIO register * @mdio: MDIO interface * @prtad: PHY address * @devad: MMD address * @addr: Register address * @mask: Mask for flag (single bit set) * @sense: New value of flag * * This debounces changes: it does not write the register if the flag * already has the proper value. Returns 0 on success, negative on error. */ int mdio_set_flag(const struct mdio_if_info *mdio, int prtad, int devad, u16 addr, int mask, bool sense) { int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr); int new_val; if (old_val < 0) return old_val; if (sense) new_val = old_val | mask; else new_val = old_val & ~mask; if (old_val == new_val) return 0; return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val); } EXPORT_SYMBOL(mdio_set_flag); /** * mdio_link_ok - is link status up/OK * @mdio: MDIO interface * @mmd_mask: Mask for MMDs to check * * Returns 1 if the PHY reports link status up/OK, 0 otherwise. * @mmd_mask is normally @mdio->mmds, but if loopback is enabled * the MMDs being bypassed should be excluded from the mask. */ int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask) { int devad, reg; if (!mmd_mask) { /* Use absence of XGMII faults in lieu of link state */ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PHYXS, MDIO_STAT2); return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT); } for (devad = 0; mmd_mask; devad++) { if (mmd_mask & (1 << devad)) { mmd_mask &= ~(1 << devad); /* Reset the latched status and fault flags */ mdio->mdio_read(mdio->dev, mdio->prtad, devad, MDIO_STAT1); if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS || devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS) mdio->mdio_read(mdio->dev, mdio->prtad, devad, MDIO_STAT2); /* Check the current status and fault flags */ reg = mdio->mdio_read(mdio->dev, mdio->prtad, devad, MDIO_STAT1); if (reg < 0 || (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) != MDIO_STAT1_LSTATUS) return false; } } return true; } EXPORT_SYMBOL(mdio45_links_ok); /** * mdio45_nway_restart - restart auto-negotiation for this interface * @mdio: MDIO interface * * Returns 0 on success, negative on error. */ int mdio45_nway_restart(const struct mdio_if_info *mdio) { if (!(mdio->mmds & MDIO_DEVS_AN)) return -EOPNOTSUPP; mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1, MDIO_AN_CTRL1_RESTART, true); return 0; } EXPORT_SYMBOL(mdio45_nway_restart); static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr) { u32 result = 0; int reg; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr); if (reg & ADVERTISE_10HALF) result |= ADVERTISED_10baseT_Half; if (reg & ADVERTISE_10FULL) result |= ADVERTISED_10baseT_Full; if (reg & ADVERTISE_100HALF) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; if (reg & ADVERTISE_PAUSE_CAP) result |= ADVERTISED_Pause; if (reg & ADVERTISE_PAUSE_ASYM) result |= ADVERTISED_Asym_Pause; return result; } /** * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET * @mdio: MDIO interface * @ecmd: Ethtool request structure * @npage_adv: Modes currently advertised on next pages * @npage_lpa: Modes advertised by link partner on next pages * * The @ecmd parameter is expected to have been cleared before calling * mdio45_ethtool_gset_npage(). * * Since the CSRs for auto-negotiation using next pages are not fully * standardised, this function does not attempt to decode them. The * caller must pass them in. */ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, struct ethtool_cmd *ecmd, u32 npage_adv, u32 npage_lpa) { int reg; u32 speed; BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); ecmd->transceiver = XCVR_INTERNAL; ecmd->phy_address = mdio->prtad; ecmd->mdio_support = mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_CTRL2); switch (reg & MDIO_PMA_CTRL2_TYPE) { case MDIO_PMA_CTRL2_10GBT: case MDIO_PMA_CTRL2_1000BT: case MDIO_PMA_CTRL2_100BTX: case MDIO_PMA_CTRL2_10BT: ecmd->port = PORT_TP; ecmd->supported = SUPPORTED_TP; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_SPEED); if (reg & MDIO_SPEED_10G) ecmd->supported |= SUPPORTED_10000baseT_Full; if (reg & MDIO_PMA_SPEED_1000) ecmd->supported |= (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half); if (reg & MDIO_PMA_SPEED_100) ecmd->supported |= (SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half); if (reg & MDIO_PMA_SPEED_10) ecmd->supported |= (SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half); ecmd->advertising = ADVERTISED_TP; break; case MDIO_PMA_CTRL2_10GBCX4: ecmd->port = PORT_OTHER; ecmd->supported = 0; ecmd->advertising = 0; break; case MDIO_PMA_CTRL2_10GBKX4: case MDIO_PMA_CTRL2_10GBKR: case MDIO_PMA_CTRL2_1000BKX: ecmd->port = PORT_OTHER; ecmd->supported = SUPPORTED_Backplane; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); if (reg & MDIO_PMA_EXTABLE_10GBKX4) ecmd->supported |= SUPPORTED_10000baseKX4_Full; if (reg & MDIO_PMA_EXTABLE_10GBKR) ecmd->supported |= SUPPORTED_10000baseKR_Full; if (reg & MDIO_PMA_EXTABLE_1000BKX) ecmd->supported |= SUPPORTED_1000baseKX_Full; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FECABLE); if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) ecmd->supported |= SUPPORTED_10000baseR_FEC; ecmd->advertising = ADVERTISED_Backplane; break; /* All the other defined modes are flavours of optical */ default: ecmd->port = PORT_FIBRE; ecmd->supported = SUPPORTED_FIBRE; ecmd->advertising = ADVERTISED_FIBRE; break; } if (mdio->mmds & MDIO_DEVS_AN) { ecmd->supported |= SUPPORTED_Autoneg; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1); if (reg & MDIO_AN_CTRL1_ENABLE) { ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | npage_adv; } else { ecmd->autoneg = AUTONEG_DISABLE; } } else { ecmd->autoneg = AUTONEG_DISABLE; } if (ecmd->autoneg) { u32 modes = 0; int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_STAT1); /* If AN is complete and successful, report best common * mode, otherwise report best advertised mode. */ if (an_stat & MDIO_AN_STAT1_COMPLETE) { ecmd->lp_advertising = mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; if (an_stat & MDIO_AN_STAT1_LPABLE) ecmd->lp_advertising |= ADVERTISED_Autoneg; modes = ecmd->advertising & ecmd->lp_advertising; } if ((modes & ~ADVERTISED_Autoneg) == 0) modes = ecmd->advertising; if (modes & (ADVERTISED_10000baseT_Full | ADVERTISED_10000baseKX4_Full | ADVERTISED_10000baseKR_Full)) { speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; } else if (modes & (ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half | ADVERTISED_1000baseKX_Full)) { speed = SPEED_1000; ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half); } else if (modes & (ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half)) { speed = SPEED_100; ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { speed = SPEED_10; ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_CTRL1); speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || speed == SPEED_10000); } ethtool_cmd_speed_set(ecmd, speed); /* 10GBASE-T MDI/MDI-X */ if (ecmd->port == PORT_TP && (ethtool_cmd_speed(ecmd) == SPEED_10000)) { switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL)) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: ecmd->eth_tp_mdix = ETH_TP_MDI; break; case 0: ecmd->eth_tp_mdix = ETH_TP_MDI_X; break; default: /* It's complicated... */ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; break; } } } EXPORT_SYMBOL(mdio45_ethtool_gset_npage); /** * mdio45_ethtool_ksettings_get_npage - get settings for ETHTOOL_GLINKSETTINGS * @mdio: MDIO interface * @cmd: Ethtool request structure * @npage_adv: Modes currently advertised on next pages * @npage_lpa: Modes advertised by link partner on next pages * * The @cmd parameter is expected to have been cleared before calling * mdio45_ethtool_ksettings_get_npage(). * * Since the CSRs for auto-negotiation using next pages are not fully * standardised, this function does not attempt to decode them. The * caller must pass them in. */ void mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, struct ethtool_link_ksettings *cmd, u32 npage_adv, u32 npage_lpa) { int reg; u32 speed, supported = 0, advertising = 0, lp_advertising = 0; BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22); BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45); cmd->base.phy_address = mdio->prtad; cmd->base.mdio_support = mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22); reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_CTRL2); switch (reg & MDIO_PMA_CTRL2_TYPE) { case MDIO_PMA_CTRL2_10GBT: case MDIO_PMA_CTRL2_1000BT: case MDIO_PMA_CTRL2_100BTX: case MDIO_PMA_CTRL2_10BT: cmd->base.port = PORT_TP; supported = SUPPORTED_TP; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_SPEED); if (reg & MDIO_SPEED_10G) supported |= SUPPORTED_10000baseT_Full; if (reg & MDIO_PMA_SPEED_1000) supported |= (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half); if (reg & MDIO_PMA_SPEED_100) supported |= (SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half); if (reg & MDIO_PMA_SPEED_10) supported |= (SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half); advertising = ADVERTISED_TP; break; case MDIO_PMA_CTRL2_10GBCX4: cmd->base.port = PORT_OTHER; supported = 0; advertising = 0; break; case MDIO_PMA_CTRL2_10GBKX4: case MDIO_PMA_CTRL2_10GBKR: case MDIO_PMA_CTRL2_1000BKX: cmd->base.port = PORT_OTHER; supported = SUPPORTED_Backplane; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); if (reg & MDIO_PMA_EXTABLE_10GBKX4) supported |= SUPPORTED_10000baseKX4_Full; if (reg & MDIO_PMA_EXTABLE_10GBKR) supported |= SUPPORTED_10000baseKR_Full; if (reg & MDIO_PMA_EXTABLE_1000BKX) supported |= SUPPORTED_1000baseKX_Full; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FECABLE); if (reg & MDIO_PMA_10GBR_FECABLE_ABLE) supported |= SUPPORTED_10000baseR_FEC; advertising = ADVERTISED_Backplane; break; /* All the other defined modes are flavours of optical */ default: cmd->base.port = PORT_FIBRE; supported = SUPPORTED_FIBRE; advertising = ADVERTISED_FIBRE; break; } if (mdio->mmds & MDIO_DEVS_AN) { supported |= SUPPORTED_Autoneg; reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1); if (reg & MDIO_AN_CTRL1_ENABLE) { cmd->base.autoneg = AUTONEG_ENABLE; advertising |= ADVERTISED_Autoneg | mdio45_get_an(mdio, MDIO_AN_ADVERTISE) | npage_adv; } else { cmd->base.autoneg = AUTONEG_DISABLE; } } else { cmd->base.autoneg = AUTONEG_DISABLE; } if (cmd->base.autoneg) { u32 modes = 0; int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_STAT1); /* If AN is complete and successful, report best common * mode, otherwise report best advertised mode. */ if (an_stat & MDIO_AN_STAT1_COMPLETE) { lp_advertising = mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa; if (an_stat & MDIO_AN_STAT1_LPABLE) lp_advertising |= ADVERTISED_Autoneg; modes = advertising & lp_advertising; } if ((modes & ~ADVERTISED_Autoneg) == 0) modes = advertising; if (modes & (ADVERTISED_10000baseT_Full | ADVERTISED_10000baseKX4_Full | ADVERTISED_10000baseKR_Full)) { speed = SPEED_10000; cmd->base.duplex = DUPLEX_FULL; } else if (modes & (ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half | ADVERTISED_1000baseKX_Full)) { speed = SPEED_1000; cmd->base.duplex = !(modes & ADVERTISED_1000baseT_Half); } else if (modes & (ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half)) { speed = SPEED_100; cmd->base.duplex = !!(modes & ADVERTISED_100baseT_Full); } else { speed = SPEED_10; cmd->base.duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_CTRL1); speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10)); cmd->base.duplex = (reg & MDIO_CTRL1_FULLDPLX || speed == SPEED_10000); } cmd->base.speed = speed; ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, supported); ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, advertising); ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising, lp_advertising); /* 10GBASE-T MDI/MDI-X */ if (cmd->base.port == PORT_TP && (cmd->base.speed == SPEED_10000)) { switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL)) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: cmd->base.eth_tp_mdix = ETH_TP_MDI; break; case 0: cmd->base.eth_tp_mdix = ETH_TP_MDI_X; break; default: /* It's complicated... */ cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID; break; } } } EXPORT_SYMBOL(mdio45_ethtool_ksettings_get_npage); /** * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs * @mdio: MDIO interface * @mii_data: MII ioctl data structure * @cmd: MII ioctl command * * Returns 0 on success, negative on error. */ int mdio_mii_ioctl(const struct mdio_if_info *mdio, struct mii_ioctl_data *mii_data, int cmd) { int prtad, devad; u16 addr = mii_data->reg_num; /* Validate/convert cmd to one of SIOC{G,S}MIIREG */ switch (cmd) { case SIOCGMIIPHY: if (mdio->prtad == MDIO_PRTAD_NONE) return -EOPNOTSUPP; mii_data->phy_id = mdio->prtad; cmd = SIOCGMIIREG; break; case SIOCGMIIREG: case SIOCSMIIREG: break; default: return -EOPNOTSUPP; } /* Validate/convert phy_id */ if ((mdio->mode_support & MDIO_SUPPORTS_C45) && mdio_phy_id_is_c45(mii_data->phy_id)) { prtad = mdio_phy_id_prtad(mii_data->phy_id); devad = mdio_phy_id_devad(mii_data->phy_id); } else if ((mdio->mode_support & MDIO_SUPPORTS_C22) && mii_data->phy_id < 0x20) { prtad = mii_data->phy_id; devad = MDIO_DEVAD_NONE; addr &= 0x1f; } else if ((mdio->mode_support & MDIO_EMULATE_C22) && mdio->prtad != MDIO_PRTAD_NONE && mii_data->phy_id == mdio->prtad) { /* Remap commonly-used MII registers. */ prtad = mdio->prtad; switch (addr) { case MII_BMCR: case MII_BMSR: case MII_PHYSID1: case MII_PHYSID2: devad = __ffs(mdio->mmds); break; case MII_ADVERTISE: case MII_LPA: if (!(mdio->mmds & MDIO_DEVS_AN)) return -EINVAL; devad = MDIO_MMD_AN; if (addr == MII_ADVERTISE) addr = MDIO_AN_ADVERTISE; else addr = MDIO_AN_LPA; break; default: return -EINVAL; } } else { return -EINVAL; } if (cmd == SIOCGMIIREG) { int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr); if (rc < 0) return rc; mii_data->val_out = rc; return 0; } else { return mdio->mdio_write(mdio->dev, prtad, devad, addr, mii_data->val_in); } } EXPORT_SYMBOL(mdio_mii_ioctl);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1