Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Arend Van Spriel | 395 | 93.38% | 3 | 50.00% |
Hauke Mehrtens | 25 | 5.91% | 2 | 33.33% |
Alwin Beukers | 3 | 0.71% | 1 | 16.67% |
Total | 423 | 6 |
/* * Copyright (c) 2011 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include <linux/delay.h> #include <linux/io.h> #include <brcm_hw_ids.h> #include <chipcommon.h> #include <brcmu_utils.h> #include "pub.h" #include "aiutils.h" #include "pmu.h" #include "soc.h" /* * external LPO crystal frequency */ #define EXT_ILP_HZ 32768 /* * Duration for ILP clock frequency measurment in milliseconds * * remark: 1000 must be an integer multiple of this duration */ #define ILP_CALC_DUR 10 /* Fields in pmucontrol */ #define PCTL_ILP_DIV_MASK 0xffff0000 #define PCTL_ILP_DIV_SHIFT 16 #define PCTL_PLL_PLLCTL_UPD 0x00000400 /* rev 2 */ #define PCTL_NOILP_ON_WAIT 0x00000200 /* rev 1 */ #define PCTL_HT_REQ_EN 0x00000100 #define PCTL_ALP_REQ_EN 0x00000080 #define PCTL_XTALFREQ_MASK 0x0000007c #define PCTL_XTALFREQ_SHIFT 2 #define PCTL_ILP_DIV_EN 0x00000002 #define PCTL_LPO_SEL 0x00000001 /* ILP clock */ #define ILP_CLOCK 32000 /* ALP clock on pre-PMU chips */ #define ALP_CLOCK 20000000 /* pmustatus */ #define PST_EXTLPOAVAIL 0x0100 #define PST_WDRESET 0x0080 #define PST_INTPEND 0x0040 #define PST_SBCLKST 0x0030 #define PST_SBCLKST_ILP 0x0010 #define PST_SBCLKST_ALP 0x0020 #define PST_SBCLKST_HT 0x0030 #define PST_ALPAVAIL 0x0008 #define PST_HTAVAIL 0x0004 #define PST_RESINIT 0x0003 /* PMU resource bit position */ #define PMURES_BIT(bit) (1 << (bit)) /* PMU corerev and chip specific PLL controls. * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary * number to differentiate different PLLs controlled by the same PMU rev. */ /* pmu XtalFreqRatio */ #define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF #define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000 #define PMU_XTALFREQ_REG_MEASURE_SHIFT 31 /* 4313 resources */ #define RES4313_BB_PU_RSRC 0 #define RES4313_ILP_REQ_RSRC 1 #define RES4313_XTAL_PU_RSRC 2 #define RES4313_ALP_AVAIL_RSRC 3 #define RES4313_RADIO_PU_RSRC 4 #define RES4313_BG_PU_RSRC 5 #define RES4313_VREG1P4_PU_RSRC 6 #define RES4313_AFE_PWRSW_RSRC 7 #define RES4313_RX_PWRSW_RSRC 8 #define RES4313_TX_PWRSW_RSRC 9 #define RES4313_BB_PWRSW_RSRC 10 #define RES4313_SYNTH_PWRSW_RSRC 11 #define RES4313_MISC_PWRSW_RSRC 12 #define RES4313_BB_PLL_PWRSW_RSRC 13 #define RES4313_HT_AVAIL_RSRC 14 #define RES4313_MACPHY_CLK_AVAIL_RSRC 15 u16 si_pmu_fast_pwrup_delay(struct si_pub *sih) { uint delay = PMU_MAX_TRANSITION_DLY; switch (ai_get_chip_id(sih)) { case BCMA_CHIP_ID_BCM43224: case BCMA_CHIP_ID_BCM43225: case BCMA_CHIP_ID_BCM4313: delay = 3700; break; default: break; } return (u16) delay; } u32 si_pmu_measure_alpclk(struct si_pub *sih) { struct si_info *sii = container_of(sih, struct si_info, pub); struct bcma_device *core; u32 alp_khz; if (ai_get_pmurev(sih) < 10) return 0; /* Remember original core before switch to chipc */ core = sii->icbus->drv_cc.core; if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) { u32 ilp_ctr, alp_hz; /* * Enable the reg to measure the freq, * in case it was disabled before */ bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 1U << PMU_XTALFREQ_REG_MEASURE_SHIFT); /* Delay for well over 4 ILP clocks */ udelay(1000); /* Read the latched number of ALP ticks per 4 ILP ticks */ ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) & PMU_XTALFREQ_REG_ILPCTR_MASK; /* * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT * bit to save power */ bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0); /* Calculate ALP frequency */ alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4; /* * Round to nearest 100KHz, and at * the same time convert to KHz */ alp_khz = (alp_hz + 50000) / 100000 * 100; } else alp_khz = 0; return alp_khz; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1