Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jakub Kiciński | 6598 | 99.37% | 2 | 28.57% |
Stanislaw Gruszka | 37 | 0.56% | 2 | 28.57% |
Thomas Gleixner | 2 | 0.03% | 1 | 14.29% |
Lorenzo Bianconi | 2 | 0.03% | 1 | 14.29% |
Gustavo A. R. Silva | 1 | 0.02% | 1 | 14.29% |
Total | 6640 | 7 |
// SPDX-License-Identifier: GPL-2.0-only /* * (c) Copyright 2002-2010, Ralink Technology, Inc. * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> */ #include "mt7601u.h" #include "mcu.h" #include "eeprom.h" #include "trace.h" #include "initvals_phy.h" #include <linux/etherdevice.h> static void mt7601u_agc_reset(struct mt7601u_dev *dev); static int mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) { int ret = 0; if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || WARN_ON(offset > 63)) return -EINVAL; if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) return 0; mutex_lock(&dev->reg_atomic_mutex); if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { ret = -ETIMEDOUT; goto out; } mt7601u_wr(dev, MT_RF_CSR_CFG, FIELD_PREP(MT_RF_CSR_CFG_DATA, value) | FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | MT_RF_CSR_CFG_WR | MT_RF_CSR_CFG_KICK); trace_rf_write(dev, bank, offset, value); out: mutex_unlock(&dev->reg_atomic_mutex); if (ret < 0) dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", bank, offset, ret); return ret; } static int mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) { int ret = -ETIMEDOUT; u32 val; if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || WARN_ON(offset > 63)) return -EINVAL; if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) return 0xff; mutex_lock(&dev->reg_atomic_mutex); if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) goto out; mt7601u_wr(dev, MT_RF_CSR_CFG, FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | MT_RF_CSR_CFG_KICK); if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) goto out; val = mt7601u_rr(dev, MT_RF_CSR_CFG); if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val); trace_rf_read(dev, bank, offset, ret); } out: mutex_unlock(&dev->reg_atomic_mutex); if (ret < 0) dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", bank, offset, ret); return ret; } static int mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) { int ret; ret = mt7601u_rf_rr(dev, bank, offset); if (ret < 0) return ret; val |= ret & ~mask; ret = mt7601u_rf_wr(dev, bank, offset, val); if (ret) return ret; return val; } static int mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) { return mt7601u_rf_rmw(dev, bank, offset, 0, val); } static int mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) { return mt7601u_rf_rmw(dev, bank, offset, mask, 0); } static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) { if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || test_bit(MT7601U_STATE_REMOVED, &dev->state)) return; mutex_lock(&dev->reg_atomic_mutex); if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); goto out; } mt7601u_wr(dev, MT_BBP_CSR_CFG, FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) | FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); trace_bbp_write(dev, offset, val); out: mutex_unlock(&dev->reg_atomic_mutex); } static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) { u32 val; int ret = -ETIMEDOUT; if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) return -EINVAL; if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) return 0xff; mutex_lock(&dev->reg_atomic_mutex); if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) goto out; mt7601u_wr(dev, MT_BBP_CSR_CFG, FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | MT_BBP_CSR_CFG_READ); if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) goto out; val = mt7601u_rr(dev, MT_BBP_CSR_CFG); if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val); trace_bbp_read(dev, offset, ret); } out: mutex_unlock(&dev->reg_atomic_mutex); if (ret < 0) dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", offset, ret); return ret; } static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) { int ret; ret = mt7601u_bbp_rr(dev, offset); if (ret < 0) return ret; val |= ret & ~mask; mt7601u_bbp_wr(dev, offset, val); return val; } static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) { int ret; ret = mt7601u_bbp_rr(dev, offset); if (ret < 0) return ret; val |= ret & ~mask; if (ret != val) mt7601u_bbp_wr(dev, offset, val); return val; } int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) { int i = 20; u8 val; do { val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); if (val && val != 0xff) break; } while (--i); if (!i) { dev_err(dev->dev, "Error: BBP is not ready\n"); return -EIO; } return 0; } u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) { return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); } int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, u16 rate) { static const s8 lna[2][2][3] = { /* main LNA */ { /* bw20 */ { -2, 15, 33 }, /* bw40 */ { 0, 16, 34 } }, /* aux LNA */ { /* bw20 */ { -2, 15, 33 }, /* bw40 */ { -2, 16, 34 } } }; int bw = FIELD_GET(MT_RXWI_RATE_BW, rate); int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); int val; if (lna_id) /* LNA id can be 0, 2, 3. */ lna_id--; val = 8; val -= lna[aux_lna][bw][lna_id]; val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); val -= dev->ee->lna_gain; val -= dev->ee->rssi_offset[0]; return val; } static void mt7601u_vco_cal(struct mt7601u_dev *dev) { mt7601u_rf_wr(dev, 0, 4, 0x0a); mt7601u_rf_wr(dev, 0, 5, 0x20); mt7601u_rf_set(dev, 0, 4, BIT(7)); msleep(2); } static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) { u32 filter = 0; int ret; if (!cal) filter |= 0x10000; if (dev->bw != MT_BW_20) filter |= 0x00100; /* TX */ ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); if (ret) return ret; /* RX */ return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); } static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) { const struct reg_table *t; if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) return -EINVAL; t = &bbp_mode_table[dev->temp_mode][dev->bw]; return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); } static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) { const struct reg_table *t; int ret; if (dev->temp_mode == mode) return 0; dev->temp_mode = mode; trace_temp_mode(dev, mode); t = bbp_mode_table[dev->temp_mode]; ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t[2].regs, t[2].n); if (ret) return ret; return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t[dev->bw].regs, t[dev->bw].n); } static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) { struct mt7601u_rate_power *t = &dev->ee->power_rate_table; if (hw_chan != 14 || dev->bw != MT_BW_20) { mt7601u_bbp_rmw(dev, 4, 0x20, 0); mt7601u_bbp_wr(dev, 178, 0xff); t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; } else { /* Apply CH14 OBW fixup */ mt7601u_bbp_wr(dev, 4, 0x60); mt7601u_bbp_wr(dev, 178, 0); /* Note: vendor code is buggy here for negative values */ t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; } } static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, struct cfg80211_chan_def *chandef) { #define FREQ_PLAN_REGS 4 static const u8 freq_plan[14][FREQ_PLAN_REGS] = { { 0x99, 0x99, 0x09, 0x50 }, { 0x46, 0x44, 0x0a, 0x50 }, { 0xec, 0xee, 0x0a, 0x50 }, { 0x99, 0x99, 0x0b, 0x50 }, { 0x46, 0x44, 0x08, 0x51 }, { 0xec, 0xee, 0x08, 0x51 }, { 0x99, 0x99, 0x09, 0x51 }, { 0x46, 0x44, 0x0a, 0x51 }, { 0xec, 0xee, 0x0a, 0x51 }, { 0x99, 0x99, 0x0b, 0x51 }, { 0x46, 0x44, 0x08, 0x52 }, { 0xec, 0xee, 0x08, 0x52 }, { 0x99, 0x99, 0x09, 0x52 }, { 0x33, 0x33, 0x0b, 0x52 }, }; struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, }; struct mt76_reg_pair bbp_settings[3] = { { 62, 0x37 - dev->ee->lna_gain }, { 63, 0x37 - dev->ee->lna_gain }, { 64, 0x37 - dev->ee->lna_gain }, }; struct ieee80211_channel *chan = chandef->chan; enum nl80211_channel_type chan_type = cfg80211_get_chandef_type(chandef); struct mt7601u_rate_power *t = &dev->ee->power_rate_table; int chan_idx; bool chan_ext_below; u8 bw; int i, ret; bw = MT_BW_20; chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); chan_idx = chan->hw_value - 1; if (chandef->width == NL80211_CHAN_WIDTH_40) { bw = MT_BW_40; if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) chan_idx -= 2; else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) chan_idx += 2; else dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); } if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", bw, chan_ext_below); mt7601u_bbp_set_bw(dev, bw); mt7601u_bbp_set_ctrlch(dev, chan_ext_below); mt7601u_mac_set_ctrlch(dev, chan_ext_below); dev->chan_ext_below = chan_ext_below; } for (i = 0; i < FREQ_PLAN_REGS; i++) channel_freq_plan[i].value = freq_plan[chan_idx][i]; ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, channel_freq_plan, FREQ_PLAN_REGS); if (ret) return ret; mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, dev->ee->chan_pwr[chan_idx] & 0x3f); ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, bbp_settings, ARRAY_SIZE(bbp_settings)); if (ret) return ret; mt7601u_vco_cal(dev); mt7601u_bbp_set_bw(dev, bw); ret = mt7601u_set_bw_filter(dev, false); if (ret) return ret; mt7601u_apply_ch14_fixup(dev, chan->hw_value); mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | int_to_s6(t->ofdm[0].bw20) << 16 | int_to_s6(t->cck[1].bw20) << 8 | int_to_s6(t->cck[0].bw20)); if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) mt7601u_agc_reset(dev); dev->chandef = *chandef; return 0; } int mt7601u_phy_set_channel(struct mt7601u_dev *dev, struct cfg80211_chan_def *chandef) { int ret; cancel_delayed_work_sync(&dev->cal_work); cancel_delayed_work_sync(&dev->freq_cal.work); mutex_lock(&dev->hw_atomic_mutex); ret = __mt7601u_phy_set_channel(dev, chandef); mutex_unlock(&dev->hw_atomic_mutex); if (ret) return ret; if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) return 0; ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, MT_CALIBRATE_INTERVAL); if (dev->freq_cal.enabled) ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, MT_FREQ_CAL_INIT_DELAY); return 0; } #define BBP_R47_FLAG GENMASK(2, 0) #define BBP_R47_F_TSSI 0 #define BBP_R47_F_PKT_T 1 #define BBP_R47_F_TX_RATE 2 #define BBP_R47_F_TEMP 4 /** * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair * @dev: pointer to adapter structure * @reg: value of BBP R47 before the operation * @flag: one of the BBP_R47_F_* flags * * Convenience helper for reading values through BBP R47/R49 pair. * Takes old value of BBP R47 as @reg, because callers usually have it * cached already. * * Return: value of BBP R49. */ static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) { flag |= reg & ~BBP_R47_FLAG; mt7601u_bbp_wr(dev, 47, flag); usleep_range(500, 700); return mt7601u_bbp_rr(dev, 49); } static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) { u8 bbp_val, temp; u32 rf_bp, rf_set; int i; rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); mt7601u_wr(dev, MT_RF_BYPASS_0, 0); mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); mt7601u_bbp_wr(dev, 22, 0x40); for (i = 100; i && (bbp_val & 0x10); i--) bbp_val = mt7601u_bbp_rr(dev, 47); temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); mt7601u_bbp_wr(dev, 22, 0); bbp_val = mt7601u_bbp_rr(dev, 21); bbp_val |= 0x02; mt7601u_bbp_wr(dev, 21, bbp_val); bbp_val &= ~0x02; mt7601u_bbp_wr(dev, 21, bbp_val); mt7601u_wr(dev, MT_RF_BYPASS_0, 0); mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); trace_read_temp(dev, temp); return temp; } static s8 mt7601u_read_temp(struct mt7601u_dev *dev) { int i; u8 val; s8 temp; val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); /* Note: this rarely succeeds, temp can change even if it fails. */ for (i = 100; i && (val & 0x10); i--) val = mt7601u_bbp_rr(dev, 47); temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); trace_read_temp(dev, temp); return temp; } static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) { static const struct mt76_reg_pair intro[] = { { 158, 0x8d }, { 159, 0xfc }, { 158, 0x8c }, { 159, 0x4c }, }, outro[] = { { 158, 0x8d }, { 159, 0xe0 }, }; u32 mac_ctrl; int i, ret; mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, intro, ARRAY_SIZE(intro)); if (ret) dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); for (i = 20; i; i--) { usleep_range(300, 500); mt7601u_bbp_wr(dev, 158, 0x8c); if (mt7601u_bbp_rr(dev, 159) == 0x0c) break; } if (!i) dev_err(dev->dev, "%s timed out\n", __func__); mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, outro, ARRAY_SIZE(outro)); if (ret) dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); } void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) { mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); mt7601u_rxdc_cal(dev); } /* Note: function copied from vendor driver */ static s16 lin2dBd(u16 linear) { short exp = 0; unsigned int mantisa; int app, dBd; if (WARN_ON(!linear)) return -10000; mantisa = linear; exp = fls(mantisa) - 16; if (exp > 0) mantisa >>= exp; else mantisa <<= abs(exp); if (mantisa <= 0xb800) app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); else app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); if (app < 0) app = 0; dBd = ((15 + exp) << 15) + app; dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); dBd = (dBd >> 10); return dBd; } static void mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) { struct tssi_data *d = &dev->ee->tssi_data; int init_offset; init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); } static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) { u8 rf_vga, rf_mixer, bbp_r47; int i, j; s8 res[4]; s16 tssi_init_db, tssi_init_hvga_db; mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); mt7601u_bbp_wr(dev, 58, 0); mt7601u_bbp_wr(dev, 241, 0x2); mt7601u_bbp_wr(dev, 23, 0x8); bbp_r47 = mt7601u_bbp_rr(dev, 47); /* Set VGA gain */ rf_vga = mt7601u_rf_rr(dev, 5, 3); mt7601u_rf_wr(dev, 5, 3, 8); /* Mixer disable */ rf_mixer = mt7601u_rf_rr(dev, 4, 39); mt7601u_rf_wr(dev, 4, 39, 0); for (i = 0; i < 4; i++) { mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); /* BBP TSSI initial and soft reset */ mt7601u_bbp_wr(dev, 22, 0); mt7601u_bbp_wr(dev, 244, 0); mt7601u_bbp_wr(dev, 21, 1); udelay(1); mt7601u_bbp_wr(dev, 21, 0); /* TSSI measurement */ mt7601u_bbp_wr(dev, 47, 0x50); mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); for (j = 20; j; j--) if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) break; if (!j) dev_err(dev->dev, "%s timed out\n", __func__); /* TSSI read */ mt7601u_bbp_wr(dev, 47, 0x40); res[i] = mt7601u_bbp_rr(dev, 49); } tssi_init_db = lin2dBd((short)res[1] - res[0]); tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); dev->tssi_init = res[0]; dev->tssi_init_hvga = res[2]; dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; dev_dbg(dev->dev, "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); mt7601u_bbp_wr(dev, 22, 0); mt7601u_bbp_wr(dev, 244, 0); mt7601u_bbp_wr(dev, 21, 1); udelay(1); mt7601u_bbp_wr(dev, 21, 0); mt7601u_wr(dev, MT_RF_BYPASS_0, 0); mt7601u_wr(dev, MT_RF_SETTING_0, 0); mt7601u_rf_wr(dev, 5, 3, rf_vga); mt7601u_rf_wr(dev, 4, 39, rf_mixer); mt7601u_bbp_wr(dev, 47, bbp_r47); mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); } static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) { int ret, temp, hi_temp = 400, lo_temp = -200; temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; dev->curr_temp = temp; /* DPD Calibration */ if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { dev->dpd_temp = temp; ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); if (ret) return ret; mt7601u_vco_cal(dev); dev_dbg(dev->dev, "Recalibrate DPD\n"); } /* PLL Lock Protect */ if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ dev->pll_lock_protect = true; mt7601u_rf_wr(dev, 4, 4, 6); mt7601u_rf_clear(dev, 4, 10, 0x30); dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ dev->pll_lock_protect = false; mt7601u_rf_wr(dev, 4, 4, 0); mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); dev_dbg(dev->dev, "PLL lock protect off\n"); } if (on) { hi_temp -= 50; lo_temp -= 50; } /* BBP CR for H, L, N temperature */ if (temp > hi_temp) return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); else if (temp > lo_temp) return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); else return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); } /* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ static int mt7601u_current_tx_power(struct mt7601u_dev *dev) { return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; } static bool mt7601u_use_hvga(struct mt7601u_dev *dev) { return !(mt7601u_current_tx_power(dev) > 20); } static s16 mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) { static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; u32 reg; switch (phy_mode) { case MT_PHY_TYPE_OFDM: tx_rate += 4; /* fall through */ case MT_PHY_TYPE_CCK: reg = dev->rf_pa_mode[0]; break; default: reg = dev->rf_pa_mode[1]; break; } return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; } static struct mt7601u_tssi_params mt7601u_tssi_params_get(struct mt7601u_dev *dev) { static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; static const int static_power[4] = { 0, -49152, -98304, 49152 }; struct mt7601u_tssi_params p; u8 bbp_r47, pkt_type, tx_rate; struct power_per_rate *rate_table; bbp_r47 = mt7601u_bbp_rr(dev, 47); p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); p.trgt_power = mt7601u_current_tx_power(dev); switch (pkt_type & 0x03) { case MT_PHY_TYPE_CCK: tx_rate = (pkt_type >> 4) & 0x03; rate_table = dev->ee->power_rate_table.cck; break; case MT_PHY_TYPE_OFDM: tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; rate_table = dev->ee->power_rate_table.ofdm; break; default: tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); tx_rate &= 0x7f; rate_table = dev->ee->power_rate_table.ht; break; } if (dev->bw == MT_BW_20) p.trgt_power += rate_table[tx_rate / 2].bw20; else p.trgt_power += rate_table[tx_rate / 2].bw40; p.trgt_power <<= 12; dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, tx_rate); /* Channel 14, cck, bw20 */ if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { if (mt7601u_bbp_rr(dev, 4) & 0x20) p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; else p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; } p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; dev_dbg(dev->dev, "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); return p; } static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) { return !(mt7601u_bbp_rr(dev, 47) & 0x10); } static int mt7601u_tssi_cal(struct mt7601u_dev *dev) { struct mt7601u_tssi_params params; int curr_pwr, diff_pwr; char tssi_offset; s8 tssi_init; s16 tssi_m_dc, tssi_db; bool hvga; u32 val; if (!dev->ee->tssi_enabled) return 0; hvga = mt7601u_use_hvga(dev); if (!dev->tssi_read_trig) return mt7601u_mcu_tssi_read_kick(dev, hvga); if (!mt7601u_tssi_read_ready(dev)) return 0; params = mt7601u_tssi_params_get(dev); tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); tssi_m_dc = params.tssi0 - tssi_init; tssi_db = lin2dBd(tssi_m_dc); dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", tssi_m_dc, tssi_db, hvga); if (dev->chandef.chan->hw_value < 5) tssi_offset = dev->ee->tssi_data.offset[0]; else if (dev->chandef.chan->hw_value < 9) tssi_offset = dev->ee->tssi_data.offset[1]; else tssi_offset = dev->ee->tssi_data.offset[2]; if (hvga) tssi_db -= dev->tssi_init_hvga_offset_db; curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); diff_pwr = params.trgt_power - curr_pwr; dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); if (params.tssi0 > 126 && diff_pwr > 0) { dev_err(dev->dev, "Error: TSSI upper saturation\n"); diff_pwr = 0; } if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { dev_err(dev->dev, "Error: TSSI lower saturation\n"); diff_pwr = 0; } if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && (abs(diff_pwr) > abs(dev->prev_pwr_diff) || (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) diff_pwr = 0; else dev->prev_pwr_diff = diff_pwr; diff_pwr += (diff_pwr > 0) ? 2048 : -2048; diff_pwr /= 4096; dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); diff_pwr += curr_pwr; val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); return mt7601u_mcu_tssi_read_kick(dev, hvga); } static u8 mt7601u_agc_default(struct mt7601u_dev *dev) { return (dev->ee->lna_gain - 8) * 2 + 0x34; } static void mt7601u_agc_reset(struct mt7601u_dev *dev) { u8 agc = mt7601u_agc_default(dev); mt7601u_bbp_wr(dev, 66, agc); } void mt7601u_agc_save(struct mt7601u_dev *dev) { dev->agc_save = mt7601u_bbp_rr(dev, 66); } void mt7601u_agc_restore(struct mt7601u_dev *dev) { mt7601u_bbp_wr(dev, 66, dev->agc_save); } static void mt7601u_agc_tune(struct mt7601u_dev *dev) { u8 val = mt7601u_agc_default(dev); long avg_rssi; if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) return; /* Note: only in STA mode and not dozing; perhaps do this only if * there is enough rssi updates since last run? * Rssi updates are only on beacons and U2M so should work... */ spin_lock_bh(&dev->con_mon_lock); avg_rssi = ewma_rssi_read(&dev->avg_rssi); spin_unlock_bh(&dev->con_mon_lock); if (avg_rssi == 0) return; avg_rssi = -avg_rssi; if (avg_rssi <= -70) val -= 0x20; else if (avg_rssi <= -60) val -= 0x10; if (val != mt7601u_bbp_rr(dev, 66)) mt7601u_bbp_wr(dev, 66, val); /* TODO: also if lost a lot of beacons try resetting * (see RTMPSetAGCInitValue() call in mlme.c). */ } static void mt7601u_phy_calibrate(struct work_struct *work) { struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, cal_work.work); mt7601u_agc_tune(dev); mt7601u_tssi_cal(dev); /* If TSSI calibration was run it already updated temperature. */ if (!dev->ee->tssi_enabled) dev->raw_temp = mt7601u_read_temp(dev); mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, MT_CALIBRATE_INTERVAL); } static unsigned long __mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) { u8 activate_threshold, deactivate_threshold; trace_freq_cal_offset(dev, phy_mode, last_offset); /* No beacons received - reschedule soon */ if (last_offset == MT_FREQ_OFFSET_INVALID) return MT_FREQ_CAL_ADJ_INTERVAL; switch (phy_mode) { case MT_PHY_TYPE_CCK: activate_threshold = 19; deactivate_threshold = 5; break; case MT_PHY_TYPE_OFDM: activate_threshold = 102; deactivate_threshold = 32; break; case MT_PHY_TYPE_HT: case MT_PHY_TYPE_HT_GF: activate_threshold = 82; deactivate_threshold = 20; break; default: WARN_ON(1); return MT_FREQ_CAL_CHECK_INTERVAL; } if (abs(last_offset) >= activate_threshold) dev->freq_cal.adjusting = true; else if (abs(last_offset) <= deactivate_threshold) dev->freq_cal.adjusting = false; if (!dev->freq_cal.adjusting) return MT_FREQ_CAL_CHECK_INTERVAL; if (last_offset > deactivate_threshold) { if (dev->freq_cal.freq > 0) dev->freq_cal.freq--; else dev->freq_cal.adjusting = false; } else if (last_offset < -deactivate_threshold) { if (dev->freq_cal.freq < 0xbf) dev->freq_cal.freq++; else dev->freq_cal.adjusting = false; } trace_freq_cal_adjust(dev, dev->freq_cal.freq); mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); mt7601u_vco_cal(dev); return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : MT_FREQ_CAL_CHECK_INTERVAL; } static void mt7601u_phy_freq_cal(struct work_struct *work) { struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, freq_cal.work.work); s8 last_offset; u8 phy_mode; unsigned long delay; spin_lock_bh(&dev->con_mon_lock); last_offset = dev->bcn_freq_off; phy_mode = dev->bcn_phy_mode; spin_unlock_bh(&dev->con_mon_lock); delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); spin_lock_bh(&dev->con_mon_lock); dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; spin_unlock_bh(&dev->con_mon_lock); } void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, struct ieee80211_bss_conf *info) { if (!info->assoc) cancel_delayed_work_sync(&dev->freq_cal.work); /* Start/stop collecting beacon data */ spin_lock_bh(&dev->con_mon_lock); ether_addr_copy(dev->ap_bssid, info->bssid); ewma_rssi_init(&dev->avg_rssi); dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; spin_unlock_bh(&dev->con_mon_lock); dev->freq_cal.freq = dev->ee->rf_freq_off; dev->freq_cal.enabled = info->assoc; dev->freq_cal.adjusting = false; if (info->assoc) ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, MT_FREQ_CAL_INIT_DELAY); } static int mt7601u_init_cal(struct mt7601u_dev *dev) { u32 mac_ctrl; int ret; dev->raw_temp = mt7601u_read_bootup_temp(dev); dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; dev->dpd_temp = dev->curr_temp; mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); if (ret) return ret; ret = mt7601u_rf_rr(dev, 0, 4); if (ret < 0) return ret; ret |= 0x80; ret = mt7601u_rf_wr(dev, 0, 4, ret); if (ret) return ret; msleep(2); ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); if (ret) return ret; mt7601u_rxdc_cal(dev); ret = mt7601u_set_bw_filter(dev, true); if (ret) return ret; ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); if (ret) return ret; ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); if (ret) return ret; ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); if (ret) return ret; ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); if (ret) return ret; mt7601u_rxdc_cal(dev); mt7601u_tssi_dc_gain_cal(dev); mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); mt7601u_temp_comp(dev, true); return 0; } int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) { u32 val, old; if (bw == dev->bw) { /* Vendor driver does the rmc even when no change is needed. */ mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); return 0; } dev->bw = bw; /* Stop MAC for the time of bw change */ old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 0, 500000); mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); return mt7601u_load_bbp_temp_table_bw(dev); } /** * mt7601u_set_rx_path - set rx path in BBP * @dev: pointer to adapter structure * @path: rx path to set values are 0-based */ void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) { mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); } /** * mt7601u_set_tx_dac - set which tx DAC to use * @dev: pointer to adapter structure * @path: DAC index, values are 0-based */ void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) { mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); } int mt7601u_phy_init(struct mt7601u_dev *dev) { int ret; dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); if (ret) return ret; ret = mt7601u_write_reg_pairs(dev, 0, rf_central, ARRAY_SIZE(rf_central)); if (ret) return ret; ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, ARRAY_SIZE(rf_channel)); if (ret) return ret; ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); if (ret) return ret; ret = mt7601u_init_cal(dev); if (ret) return ret; dev->prev_pwr_diff = 100; INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1