Contributors: 6
Author Tokens Token Proportion Commits Commit Proportion
Chaoming Li 2395 98.36% 1 10.00%
Joe Perches 30 1.23% 3 30.00%
Larry Finger 7 0.29% 3 30.00%
Arnd Bergmann 1 0.04% 1 10.00%
Heinrich Schuchardt 1 0.04% 1 10.00%
Felipe Pena 1 0.04% 1 10.00%
Total 2435 10 


// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2009-2012  Realtek Corporation.*/

#include "../wifi.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
#include "rf.h"
#include "dm.h"


static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
				  u8 chnl, u32 *ofdmbase, u32 *mcsbase,
				  u8 *p_final_pwridx)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u32 pwrbase0, pwrbase1;
	u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
	u8 i, pwrlevel[4];

	for (i = 0; i < 2; i++)
		pwrlevel[i] = p_pwrlevel[i];

	/* We only care about the path A for legacy. */
	if (rtlefuse->eeprom_version < 2) {
		pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
	} else {
		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
						[RF90_PATH_A][chnl - 1];

		/* For legacy OFDM, tx pwr always > HT OFDM pwr.
		 * We do not care Path B
		 * legacy OFDM pwr diff. NO BB register
		 * to notify HW. */
		pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
	}

	pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) |
		    pwrbase0;
	*ofdmbase = pwrbase0;

	/* MCS rates */
	if (rtlefuse->eeprom_version >= 2) {
		/* Check HT20 to HT40 diff	*/
		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
			for (i = 0; i < 2; i++) {
				/* rf-A, rf-B */
				/* HT 20<->40 pwr diff */
				ht20_pwrdiff = rtlefuse->txpwr_ht20diff
							[i][chnl - 1];

				if (ht20_pwrdiff < 8) /* 0~+7 */
					pwrlevel[i] += ht20_pwrdiff;
				else /* index8-15=-8~-1 */
					pwrlevel[i] -= (16 - ht20_pwrdiff);
			}
		}
	}

	/* use index of rf-A */
	pwrbase1 = pwrlevel[0];
	pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) |
				pwrbase1;
	*mcsbase = pwrbase1;

	/* The following is for Antenna
	 * diff from Ant-B to Ant-A */
	p_final_pwridx[0] = pwrlevel[0];
	p_final_pwridx[1] = pwrlevel[1];

	switch (rtlefuse->eeprom_regulatory) {
	case 3:
		/* The following is for calculation
		 * of the power diff for Ant-B to Ant-A. */
		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
			p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
						[RF90_PATH_A][
						chnl - 1];
			p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
						[RF90_PATH_B][
						chnl - 1];
		} else {
			p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
						[RF90_PATH_A][
						chnl - 1];
			p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
						[RF90_PATH_B][
						chnl - 1];
		}
		break;
	default:
		break;
	}

	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
			 p_final_pwridx[0], p_final_pwridx[1]);
	} else {
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
			 p_final_pwridx[0], p_final_pwridx[1]);
	}
}

static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
				    u8 *p_final_pwridx)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	s8 ant_pwr_diff = 0;
	u32	u4reg_val = 0;

	if (rtlphy->rf_type == RF_2T2R) {
		ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];

		/* range is from 7~-8,
		 * index = 0x0~0xf */
		if (ant_pwr_diff > 7)
			ant_pwr_diff = 7;
		if (ant_pwr_diff < -8)
			ant_pwr_diff = -8;

		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
			 ant_pwr_diff, ant_pwr_diff & 0xf);

		ant_pwr_diff &= 0xf;
	}

	/* Antenna TX power difference */
	rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
	rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
	rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff);	/* RF-B */

	u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 |
				rtlefuse->antenna_txpwdiff[1] << 4 |
				rtlefuse->antenna_txpwdiff[0];

	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
		      u4reg_val);

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
		 RFPGA0_TXGAINSTAGE, u4reg_val);
}

static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
						      u8 chnl, u8 index,
						      u32 pwrbase0,
						      u32 pwrbase1,
						      u32 *p_outwrite_val)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u8 i, chnlgroup, pwrdiff_limit[4];
	u32 writeval, customer_limit;

	/* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
	switch (rtlefuse->eeprom_regulatory) {
	case 0:
		/* Realtek better performance increase power diff
		 * defined by Realtek for large power */
		chnlgroup = 0;

		writeval = rtlphy->mcs_offset[chnlgroup][index] +
				((index < 2) ? pwrbase0 : pwrbase1);

		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "RTK better performance, writeval = 0x%x\n", writeval);
		break;
	case 1:
		/* Realtek regulatory increase power diff defined
		 * by Realtek for regulatory */
		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
			writeval = ((index < 2) ? pwrbase0 : pwrbase1);

			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
				 "Realtek regulatory, 40MHz, writeval = 0x%x\n",
				 writeval);
		} else {
			chnlgroup = 0;

			if (rtlphy->pwrgroup_cnt >= 3) {
				if (chnl <= 3)
					chnlgroup = 0;
				else if (chnl >= 4 && chnl <= 8)
					chnlgroup = 1;
				else if (chnl > 8)
					chnlgroup = 2;
				if (rtlphy->pwrgroup_cnt == 4)
					chnlgroup++;
			}

			writeval = rtlphy->mcs_offset[chnlgroup][index]
					+ ((index < 2) ?
					pwrbase0 : pwrbase1);

			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
				 "Realtek regulatory, 20MHz, writeval = 0x%x\n",
				 writeval);
		}
		break;
	case 2:
		/* Better regulatory don't increase any power diff */
		writeval = ((index < 2) ? pwrbase0 : pwrbase1);
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "Better regulatory, writeval = 0x%x\n", writeval);
		break;
	case 3:
		/* Customer defined power diff. increase power diff
		  defined by customer. */
		chnlgroup = 0;

		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
				 "customer's limit, 40MHz = 0x%x\n",
				 rtlefuse->pwrgroup_ht40
				 [RF90_PATH_A][chnl - 1]);
		} else {
			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
				 "customer's limit, 20MHz = 0x%x\n",
				 rtlefuse->pwrgroup_ht20
				 [RF90_PATH_A][chnl - 1]);
		}

		for (i = 0; i < 4; i++) {
			pwrdiff_limit[i] = (u8)((rtlphy->mcs_offset
				[chnlgroup][index] & (0x7f << (i * 8)))
				>> (i * 8));

			if (rtlphy->current_chan_bw ==
			    HT_CHANNEL_WIDTH_20_40) {
				if (pwrdiff_limit[i] >
				    rtlefuse->pwrgroup_ht40
				    [RF90_PATH_A][chnl - 1]) {
					pwrdiff_limit[i] =
					  rtlefuse->pwrgroup_ht40
					  [RF90_PATH_A][chnl - 1];
				}
			} else {
				if (pwrdiff_limit[i] >
				    rtlefuse->pwrgroup_ht20
				    [RF90_PATH_A][chnl - 1]) {
					pwrdiff_limit[i] =
					    rtlefuse->pwrgroup_ht20
					    [RF90_PATH_A][chnl - 1];
				}
			}
		}

		customer_limit = (pwrdiff_limit[3] << 24) |
				(pwrdiff_limit[2] << 16) |
				(pwrdiff_limit[1] << 8) |
				(pwrdiff_limit[0]);
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "Customer's limit = 0x%x\n", customer_limit);

		writeval = customer_limit + ((index < 2) ?
					     pwrbase0 : pwrbase1);
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "Customer, writeval = 0x%x\n", writeval);
		break;
	default:
		chnlgroup = 0;
		writeval = rtlphy->mcs_offset[chnlgroup][index] +
				((index < 2) ? pwrbase0 : pwrbase1);
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 "RTK better performance, writeval = 0x%x\n", writeval);
		break;
	}

	if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
		writeval = 0x10101010;
	else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
		 TX_HIGH_PWR_LEVEL_LEVEL2)
		writeval = 0x0;

	*p_outwrite_val = writeval;

}

static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
					u8 index, u32 val)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
	u8 i, rfa_pwr[4];
	u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
	u32 writeval = val;

	/* If path A and Path B coexist, we must limit Path A tx power.
	 * Protect Path B pwr over or under flow. We need to calculate
	 * upper and lower bound of path A tx power. */
	if (rtlphy->rf_type == RF_2T2R) {
		rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];

		/* Diff=-8~-1 */
		if (rf_pwr_diff >= 8) {
			/* Prevent underflow!! */
			rfa_lower_bound = 0x10 - rf_pwr_diff;
		/* if (rf_pwr_diff >= 0) Diff = 0-7 */
		} else {
			rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
		}
	}

	for (i = 0; i < 4; i++) {
		rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
		if (rfa_pwr[i]  > RF6052_MAX_TX_PWR)
			rfa_pwr[i]  = RF6052_MAX_TX_PWR;

		/* If path A and Path B coexist, we must limit Path A tx power.
		 * Protect Path B pwr over or under flow. We need to calculate
		 * upper and lower bound of path A tx power. */
		if (rtlphy->rf_type == RF_2T2R) {
			/* Diff=-8~-1 */
			if (rf_pwr_diff >= 8) {
				/* Prevent underflow!! */
				if (rfa_pwr[i] < rfa_lower_bound)
					rfa_pwr[i] = rfa_lower_bound;
			/* Diff = 0-7 */
			} else if (rf_pwr_diff >= 1) {
				/* Prevent overflow */
				if (rfa_pwr[i] > rfa_upper_bound)
					rfa_pwr[i] = rfa_upper_bound;
			}
		}

	}

	writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) |
				rfa_pwr[0];

	rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
}

void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
				       u8 *p_pwrlevel, u8 chnl)
{
	u32 writeval, pwrbase0, pwrbase1;
	u8 index = 0;
	u8 finalpwr_idx[4];

	_rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
			&finalpwr_idx[0]);
	_rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);

	for (index = 0; index < 6; index++) {
		_rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
				pwrbase0, pwrbase1, &writeval);

		_rtl92s_write_ofdm_powerreg(hw, index, writeval);
	}
}

void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u32 txagc = 0;
	bool dont_inc_cck_or_turboscanoff = false;

	if (((rtlefuse->eeprom_version >= 2) &&
	      (rtlefuse->txpwr_safetyflag == 1)) ||
	      ((rtlefuse->eeprom_version >= 2) &&
	      (rtlefuse->eeprom_regulatory != 0)))
		dont_inc_cck_or_turboscanoff = true;

	if (mac->act_scanning) {
		txagc = 0x3f;
		if (dont_inc_cck_or_turboscanoff)
			txagc = pwrlevel;
	} else {
		txagc = pwrlevel;

		if (rtlpriv->dm.dynamic_txhighpower_lvl ==
		    TX_HIGH_PWR_LEVEL_LEVEL1)
			txagc = 0x10;
		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
			TX_HIGH_PWR_LEVEL_LEVEL2)
			txagc = 0x0;
	}

	if (txagc > RF6052_MAX_TX_PWR)
		txagc = RF6052_MAX_TX_PWR;

	rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);

}

bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	u32 u4reg_val = 0;
	u8 rfpath;
	bool rtstatus = true;
	struct bb_reg_def *pphyreg;

	/* Initialize RF */
	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {

		pphyreg = &rtlphy->phyreg_def[rfpath];

		/* Store original RFENV control type */
		switch (rfpath) {
		case RF90_PATH_A:
		case RF90_PATH_C:
			u4reg_val = rtl92s_phy_query_bb_reg(hw,
							    pphyreg->rfintfs,
							    BRFSI_RFENV);
			break;
		case RF90_PATH_B:
		case RF90_PATH_D:
			u4reg_val = rtl92s_phy_query_bb_reg(hw,
							    pphyreg->rfintfs,
							    BRFSI_RFENV << 16);
			break;
		}

		/* Set RF_ENV enable */
		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
				      BRFSI_RFENV << 16, 0x1);

		/* Set RF_ENV output high */
		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);

		/* Set bit number of Address and Data for RF register */
		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
				B3WIRE_ADDRESSLENGTH, 0x0);
		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
				B3WIRE_DATALENGTH, 0x0);

		/* Initialize RF fom connfiguration file */
		switch (rfpath) {
		case RF90_PATH_A:
			rtstatus = rtl92s_phy_config_rf(hw,
						(enum radio_path)rfpath);
			break;
		case RF90_PATH_B:
			rtstatus = rtl92s_phy_config_rf(hw,
						(enum radio_path)rfpath);
			break;
		case RF90_PATH_C:
			break;
		case RF90_PATH_D:
			break;
		}

		/* Restore RFENV control type */
		switch (rfpath) {
		case RF90_PATH_A:
		case RF90_PATH_C:
			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
					      u4reg_val);
			break;
		case RF90_PATH_B:
		case RF90_PATH_D:
			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
					      BRFSI_RFENV << 16,
					      u4reg_val);
			break;
		}

		if (!rtstatus) {
			pr_err("Radio[%d] Fail!!\n", rfpath);
			goto fail;
		}

	}

	return rtstatus;

fail:
	return rtstatus;
}

void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);

	switch (bandwidth) {
	case HT_CHANNEL_WIDTH_20:
		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
					   0xfffff3ff) | 0x0400);
		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
					rtlphy->rfreg_chnlval[0]);
		break;
	case HT_CHANNEL_WIDTH_20_40:
		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
					    0xfffff3ff));
		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
					rtlphy->rfreg_chnlval[0]);
		break;
	default:
		pr_err("unknown bandwidth: %#X\n", bandwidth);
		break;
	}
}