Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Al Cooper | 2968 | 98.83% | 13 | 81.25% |
Florian Fainelli | 32 | 1.07% | 1 | 6.25% |
Thomas Gleixner | 2 | 0.07% | 1 | 6.25% |
zhong jiang | 1 | 0.03% | 1 | 6.25% |
Total | 3003 | 16 |
// SPDX-License-Identifier: GPL-2.0-only /* * phy-brcm-usb.c - Broadcom USB Phy Driver * * Copyright (C) 2015-2017 Broadcom */ #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> #include <linux/mfd/syscon.h> #include "phy-brcm-usb-init.h" static DEFINE_MUTEX(sysfs_lock); enum brcm_usb_phy_id { BRCM_USB_PHY_2_0 = 0, BRCM_USB_PHY_3_0, BRCM_USB_PHY_ID_MAX }; struct value_to_name_map { int value; const char *name; }; struct match_chip_info { void *init_func; u8 required_regs[BRCM_REGS_MAX + 1]; u8 optional_reg; }; static struct value_to_name_map brcm_dr_mode_to_name[] = { { USB_CTLR_MODE_HOST, "host" }, { USB_CTLR_MODE_DEVICE, "peripheral" }, { USB_CTLR_MODE_DRD, "drd" }, { USB_CTLR_MODE_TYPEC_PD, "typec-pd" } }; static struct value_to_name_map brcm_dual_mode_to_name[] = { { 0, "host" }, { 1, "device" }, { 2, "auto" }, }; struct brcm_usb_phy { struct phy *phy; unsigned int id; bool inited; }; struct brcm_usb_phy_data { struct brcm_usb_init_params ini; bool has_eohci; bool has_xhci; struct clk *usb_20_clk; struct clk *usb_30_clk; struct clk *suspend_clk; struct mutex mutex; /* serialize phy init */ int init_count; int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; }; static s8 *node_reg_names[BRCM_REGS_MAX] = { "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" }; static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) { struct phy *gphy = dev_id; pm_wakeup_event(&gphy->dev, 0); return IRQ_HANDLED; } static int brcm_usb_phy_init(struct phy *gphy) { struct brcm_usb_phy *phy = phy_get_drvdata(gphy); struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); /* * Use a lock to make sure a second caller waits until * the base phy is inited before using it. */ mutex_lock(&priv->mutex); if (priv->init_count++ == 0) { clk_prepare_enable(priv->usb_20_clk); clk_prepare_enable(priv->usb_30_clk); clk_prepare_enable(priv->suspend_clk); brcm_usb_init_common(&priv->ini); } mutex_unlock(&priv->mutex); if (phy->id == BRCM_USB_PHY_2_0) brcm_usb_init_eohci(&priv->ini); else if (phy->id == BRCM_USB_PHY_3_0) brcm_usb_init_xhci(&priv->ini); phy->inited = true; dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id, priv->init_count); return 0; } static int brcm_usb_phy_exit(struct phy *gphy) { struct brcm_usb_phy *phy = phy_get_drvdata(gphy); struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]); dev_dbg(&gphy->dev, "EXIT\n"); if (phy->id == BRCM_USB_PHY_2_0) brcm_usb_uninit_eohci(&priv->ini); if (phy->id == BRCM_USB_PHY_3_0) brcm_usb_uninit_xhci(&priv->ini); /* If both xhci and eohci are gone, reset everything else */ mutex_lock(&priv->mutex); if (--priv->init_count == 0) { brcm_usb_uninit_common(&priv->ini); clk_disable_unprepare(priv->usb_20_clk); clk_disable_unprepare(priv->usb_30_clk); clk_disable_unprepare(priv->suspend_clk); } mutex_unlock(&priv->mutex); phy->inited = false; return 0; } static struct phy_ops brcm_usb_phy_ops = { .init = brcm_usb_phy_init, .exit = brcm_usb_phy_exit, .owner = THIS_MODULE, }; static struct phy *brcm_usb_phy_xlate(struct device *dev, struct of_phandle_args *args) { struct brcm_usb_phy_data *data = dev_get_drvdata(dev); /* * values 0 and 1 are for backward compatibility with * device tree nodes from older bootloaders. */ switch (args->args[0]) { case 0: case PHY_TYPE_USB2: if (data->phys[BRCM_USB_PHY_2_0].phy) return data->phys[BRCM_USB_PHY_2_0].phy; dev_warn(dev, "Error, 2.0 Phy not found\n"); break; case 1: case PHY_TYPE_USB3: if (data->phys[BRCM_USB_PHY_3_0].phy) return data->phys[BRCM_USB_PHY_3_0].phy; dev_warn(dev, "Error, 3.0 Phy not found\n"); break; } return ERR_PTR(-ENODEV); } static int name_to_value(struct value_to_name_map *table, int count, const char *name, int *value) { int x; *value = 0; for (x = 0; x < count; x++) { if (sysfs_streq(name, table[x].name)) { *value = x; return 0; } } return -EINVAL; } static const char *value_to_name(struct value_to_name_map *table, int count, int value) { if (value >= count) return "unknown"; return table[value].name; } static ssize_t dr_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); return sprintf(buf, "%s\n", value_to_name(&brcm_dr_mode_to_name[0], ARRAY_SIZE(brcm_dr_mode_to_name), priv->ini.mode)); } static DEVICE_ATTR_RO(dr_mode); static ssize_t dual_select_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); int value; int res; mutex_lock(&sysfs_lock); res = name_to_value(&brcm_dual_mode_to_name[0], ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); if (!res) { brcm_usb_set_dual_select(&priv->ini, value); res = len; } mutex_unlock(&sysfs_lock); return res; } static ssize_t dual_select_show(struct device *dev, struct device_attribute *attr, char *buf) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); int value; mutex_lock(&sysfs_lock); value = brcm_usb_get_dual_select(&priv->ini); mutex_unlock(&sysfs_lock); return sprintf(buf, "%s\n", value_to_name(&brcm_dual_mode_to_name[0], ARRAY_SIZE(brcm_dual_mode_to_name), value)); } static DEVICE_ATTR_RW(dual_select); static struct attribute *brcm_usb_phy_attrs[] = { &dev_attr_dr_mode.attr, &dev_attr_dual_select.attr, NULL }; static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; static struct match_chip_info chip_info_7216 = { .init_func = &brcm_usb_dvr_init_7216, .required_regs = { BRCM_REGS_CTRL, BRCM_REGS_XHCI_EC, BRCM_REGS_XHCI_GBL, -1, }, }; static struct match_chip_info chip_info_7211b0 = { .init_func = &brcm_usb_dvr_init_7211b0, .required_regs = { BRCM_REGS_CTRL, BRCM_REGS_XHCI_EC, BRCM_REGS_XHCI_GBL, BRCM_REGS_USB_PHY, BRCM_REGS_USB_MDIO, -1, }, .optional_reg = BRCM_REGS_BDC_EC, }; static struct match_chip_info chip_info_7445 = { .init_func = &brcm_usb_dvr_init_7445, .required_regs = { BRCM_REGS_CTRL, BRCM_REGS_XHCI_EC, -1, }, }; static const struct of_device_id brcm_usb_dt_ids[] = { { .compatible = "brcm,bcm7216-usb-phy", .data = &chip_info_7216, }, { .compatible = "brcm,bcm7211-usb-phy", .data = &chip_info_7211b0, }, { .compatible = "brcm,brcmstb-usb-phy", .data = &chip_info_7445, }, { /* sentinel */ } }; static int brcm_usb_get_regs(struct platform_device *pdev, enum brcmusb_reg_sel regs, struct brcm_usb_init_params *ini, bool optional) { struct resource *res; /* Older DT nodes have ctrl and optional xhci_ec by index only */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, node_reg_names[regs]); if (res == NULL) { if (regs == BRCM_REGS_CTRL) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); } else if (regs == BRCM_REGS_XHCI_EC) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); /* XHCI_EC registers are optional */ if (res == NULL) return 0; } if (res == NULL) { if (optional) { dev_dbg(&pdev->dev, "Optional reg %s not found\n", node_reg_names[regs]); return 0; } dev_err(&pdev->dev, "can't get %s base addr\n", node_reg_names[regs]); return 1; } } ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(ini->regs[regs])) { dev_err(&pdev->dev, "can't map %s register space\n", node_reg_names[regs]); return 1; } return 0; } static int brcm_usb_phy_dvr_init(struct platform_device *pdev, struct brcm_usb_phy_data *priv, struct device_node *dn) { struct device *dev = &pdev->dev; struct phy *gphy = NULL; int err; priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); if (IS_ERR(priv->usb_20_clk)) { if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_info(dev, "Clock not found in Device Tree\n"); priv->usb_20_clk = NULL; } err = clk_prepare_enable(priv->usb_20_clk); if (err) return err; if (priv->has_eohci) { gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); if (IS_ERR(gphy)) { dev_err(dev, "failed to create EHCI/OHCI PHY\n"); return PTR_ERR(gphy); } priv->phys[BRCM_USB_PHY_2_0].phy = gphy; priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0; phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]); } if (priv->has_xhci) { gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops); if (IS_ERR(gphy)) { dev_err(dev, "failed to create XHCI PHY\n"); return PTR_ERR(gphy); } priv->phys[BRCM_USB_PHY_3_0].phy = gphy; priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0; phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]); priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); if (IS_ERR(priv->usb_30_clk)) { if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_info(dev, "USB3.0 clock not found in Device Tree\n"); priv->usb_30_clk = NULL; } err = clk_prepare_enable(priv->usb_30_clk); if (err) return err; } priv->suspend_clk = clk_get(dev, "usb0_freerun"); if (IS_ERR(priv->suspend_clk)) { if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(dev, "Suspend Clock not found in Device Tree\n"); priv->suspend_clk = NULL; } priv->wake_irq = platform_get_irq_byname(pdev, "wake"); if (priv->wake_irq < 0) priv->wake_irq = platform_get_irq_byname(pdev, "wakeup"); if (priv->wake_irq >= 0) { err = devm_request_irq(dev, priv->wake_irq, brcm_usb_phy_wake_isr, 0, dev_name(dev), gphy); if (err < 0) return err; device_set_wakeup_capable(dev, 1); } else { dev_info(dev, "Wake interrupt missing, system wake not supported\n"); } return 0; } static int brcm_usb_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct brcm_usb_phy_data *priv; struct phy_provider *phy_provider; struct device_node *dn = pdev->dev.of_node; int err; const char *mode; const struct of_device_id *match; void (*dvr_init)(struct brcm_usb_init_params *params); const struct match_chip_info *info; struct regmap *rmap; int x; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; platform_set_drvdata(pdev, priv); priv->ini.family_id = brcmstb_get_family_id(); priv->ini.product_id = brcmstb_get_product_id(); match = of_match_node(brcm_usb_dt_ids, dev->of_node); info = match->data; dvr_init = info->init_func; (*dvr_init)(&priv->ini); dev_dbg(dev, "Best mapping table is for %s\n", priv->ini.family_name); of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); priv->ini.mode = USB_CTLR_MODE_HOST; err = of_property_read_string(dn, "dr_mode", &mode); if (err == 0) { name_to_value(&brcm_dr_mode_to_name[0], ARRAY_SIZE(brcm_dr_mode_to_name), mode, &priv->ini.mode); } if (of_property_read_bool(dn, "brcm,has-xhci")) priv->has_xhci = true; if (of_property_read_bool(dn, "brcm,has-eohci")) priv->has_eohci = true; for (x = 0; x < BRCM_REGS_MAX; x++) { if (info->required_regs[x] >= BRCM_REGS_MAX) break; err = brcm_usb_get_regs(pdev, info->required_regs[x], &priv->ini, false); if (err) return -EINVAL; } if (info->optional_reg) { err = brcm_usb_get_regs(pdev, info->optional_reg, &priv->ini, true); if (err) return -EINVAL; } err = brcm_usb_phy_dvr_init(pdev, priv, dn); if (err) return err; mutex_init(&priv->mutex); /* make sure invert settings are correct */ brcm_usb_init_ipp(&priv->ini); /* * Create sysfs entries for mode. * Remove "dual_select" attribute if not in dual mode */ if (priv->ini.mode != USB_CTLR_MODE_DRD) brcm_usb_phy_attrs[1] = NULL; err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group); if (err) dev_warn(dev, "Error creating sysfs attributes\n"); /* Get piarbctl syscon if it exists */ rmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon-piarbctl"); if (IS_ERR(rmap)) rmap = syscon_regmap_lookup_by_phandle(dev->of_node, "brcm,syscon-piarbctl"); if (!IS_ERR(rmap)) priv->ini.syscon_piarbctl = rmap; /* start with everything off */ if (priv->has_xhci) brcm_usb_uninit_xhci(&priv->ini); if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); clk_disable_unprepare(priv->usb_20_clk); clk_disable_unprepare(priv->usb_30_clk); phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); return PTR_ERR_OR_ZERO(phy_provider); } static int brcm_usb_phy_remove(struct platform_device *pdev) { sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); return 0; } #ifdef CONFIG_PM_SLEEP static int brcm_usb_phy_suspend(struct device *dev) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); if (priv->init_count) { priv->ini.wake_enabled = device_may_wakeup(dev); if (priv->phys[BRCM_USB_PHY_3_0].inited) brcm_usb_uninit_xhci(&priv->ini); if (priv->phys[BRCM_USB_PHY_2_0].inited) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); /* * Handle the clocks unless needed for wake. This has * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks * and newer XHCI->2.0-clks/3.0-clks. */ if (!priv->ini.suspend_with_clocks) { if (priv->phys[BRCM_USB_PHY_3_0].inited) clk_disable_unprepare(priv->usb_30_clk); if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci) clk_disable_unprepare(priv->usb_20_clk); } if (priv->wake_irq >= 0) enable_irq_wake(priv->wake_irq); } return 0; } static int brcm_usb_phy_resume(struct device *dev) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); clk_prepare_enable(priv->usb_20_clk); clk_prepare_enable(priv->usb_30_clk); brcm_usb_init_ipp(&priv->ini); /* * Initialize anything that was previously initialized. * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { if (priv->wake_irq >= 0) disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini); if (priv->phys[BRCM_USB_PHY_2_0].inited) { brcm_usb_init_eohci(&priv->ini); } else if (priv->has_eohci) { brcm_usb_uninit_eohci(&priv->ini); clk_disable_unprepare(priv->usb_20_clk); } if (priv->phys[BRCM_USB_PHY_3_0].inited) { brcm_usb_init_xhci(&priv->ini); } else if (priv->has_xhci) { brcm_usb_uninit_xhci(&priv->ini); clk_disable_unprepare(priv->usb_30_clk); if (!priv->has_eohci) clk_disable_unprepare(priv->usb_20_clk); } } else { if (priv->has_xhci) brcm_usb_uninit_xhci(&priv->ini); if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); clk_disable_unprepare(priv->usb_20_clk); clk_disable_unprepare(priv->usb_30_clk); } priv->ini.wake_enabled = false; return 0; } #endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops brcm_usb_phy_pm_ops = { SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) }; MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); static struct platform_driver brcm_usb_driver = { .probe = brcm_usb_phy_probe, .remove = brcm_usb_phy_remove, .driver = { .name = "brcmstb-usb-phy", .pm = &brcm_usb_phy_pm_ops, .of_match_table = brcm_usb_dt_ids, }, }; module_platform_driver(brcm_usb_driver); MODULE_ALIAS("platform:brcmstb-usb-phy"); MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>"); MODULE_DESCRIPTION("BRCM USB PHY driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1