| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Tony Lindgren | 2896 | 99.93% | 7 | 87.50% |
| Arvind Yadav | 2 | 0.07% | 1 | 12.50% |
| Total | 2898 | 8 |
/* * Motorola CPCAP PMIC USB PHY driver * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> * * Some parts based on earlier Motorola Linux kernel tree code in * board-mapphone-usb.c and cpcap-usb-det.c: * Copyright (C) 2007 - 2011 Motorola, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. * * This program is distributed "as is" WITHOUT ANY WARRANTY of any * kind, whether express or implied; without even the implied warranty * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/atomic.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/iio/consumer.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/gpio/consumer.h> #include <linux/mfd/motorola-cpcap.h> #include <linux/phy/omap_usb.h> #include <linux/phy/phy.h> #include <linux/regulator/consumer.h> #include <linux/usb/musb.h> /* CPCAP_REG_USBC1 register bits */ #define CPCAP_BIT_IDPULSE BIT(15) #define CPCAP_BIT_ID100KPU BIT(14) #define CPCAP_BIT_IDPUCNTRL BIT(13) #define CPCAP_BIT_IDPU BIT(12) #define CPCAP_BIT_IDPD BIT(11) #define CPCAP_BIT_VBUSCHRGTMR3 BIT(10) #define CPCAP_BIT_VBUSCHRGTMR2 BIT(9) #define CPCAP_BIT_VBUSCHRGTMR1 BIT(8) #define CPCAP_BIT_VBUSCHRGTMR0 BIT(7) #define CPCAP_BIT_VBUSPU BIT(6) #define CPCAP_BIT_VBUSPD BIT(5) #define CPCAP_BIT_DMPD BIT(4) #define CPCAP_BIT_DPPD BIT(3) #define CPCAP_BIT_DM1K5PU BIT(2) #define CPCAP_BIT_DP1K5PU BIT(1) #define CPCAP_BIT_DP150KPU BIT(0) /* CPCAP_REG_USBC2 register bits */ #define CPCAP_BIT_ZHSDRV1 BIT(15) #define CPCAP_BIT_ZHSDRV0 BIT(14) #define CPCAP_BIT_DPLLCLKREQ BIT(13) #define CPCAP_BIT_SE0CONN BIT(12) #define CPCAP_BIT_UARTTXTRI BIT(11) #define CPCAP_BIT_UARTSWAP BIT(10) #define CPCAP_BIT_UARTMUX1 BIT(9) #define CPCAP_BIT_UARTMUX0 BIT(8) #define CPCAP_BIT_ULPISTPLOW BIT(7) #define CPCAP_BIT_TXENPOL BIT(6) #define CPCAP_BIT_USBXCVREN BIT(5) #define CPCAP_BIT_USBCNTRL BIT(4) #define CPCAP_BIT_USBSUSPEND BIT(3) #define CPCAP_BIT_EMUMODE2 BIT(2) #define CPCAP_BIT_EMUMODE1 BIT(1) #define CPCAP_BIT_EMUMODE0 BIT(0) /* CPCAP_REG_USBC3 register bits */ #define CPCAP_BIT_SPARE_898_15 BIT(15) #define CPCAP_BIT_IHSTX03 BIT(14) #define CPCAP_BIT_IHSTX02 BIT(13) #define CPCAP_BIT_IHSTX01 BIT(12) #define CPCAP_BIT_IHSTX0 BIT(11) #define CPCAP_BIT_IDPU_SPI BIT(10) #define CPCAP_BIT_UNUSED_898_9 BIT(9) #define CPCAP_BIT_VBUSSTBY_EN BIT(8) #define CPCAP_BIT_VBUSEN_SPI BIT(7) #define CPCAP_BIT_VBUSPU_SPI BIT(6) #define CPCAP_BIT_VBUSPD_SPI BIT(5) #define CPCAP_BIT_DMPD_SPI BIT(4) #define CPCAP_BIT_DPPD_SPI BIT(3) #define CPCAP_BIT_SUSPEND_SPI BIT(2) #define CPCAP_BIT_PU_SPI BIT(1) #define CPCAP_BIT_ULPI_SPI_SEL BIT(0) struct cpcap_usb_ints_state { bool id_ground; bool id_float; bool chrg_det; bool rvrs_chrg; bool vbusov; bool chrg_se1b; bool se0conn; bool rvrs_mode; bool chrgcurr1; bool vbusvld; bool sessvld; bool sessend; bool se1; bool battdetb; bool dm; bool dp; }; enum cpcap_gpio_mode { CPCAP_DM_DP, CPCAP_MDM_RX_TX, CPCAP_UNKNOWN_DISABLED, /* Seems to disable USB lines */ CPCAP_OTG_DM_DP, }; struct cpcap_phy_ddata { struct regmap *reg; struct device *dev; struct clk *refclk; struct usb_phy phy; struct delayed_work detect_work; struct pinctrl *pins; struct pinctrl_state *pins_ulpi; struct pinctrl_state *pins_utmi; struct pinctrl_state *pins_uart; struct gpio_desc *gpio[2]; struct iio_channel *vbus; struct iio_channel *id; struct regulator *vusb; atomic_t active; unsigned int vbus_provider:1; unsigned int docked:1; }; static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata) { int error, value = 0; error = iio_read_channel_processed(ddata->vbus, &value); if (error >= 0) return value > 3900 ? true : false; dev_err(ddata->dev, "error reading VBUS: %i\n", error); return false; } static int cpcap_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host) { otg->host = host; if (!host) otg->state = OTG_STATE_UNDEFINED; return 0; } static int cpcap_usb_phy_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { otg->gadget = gadget; if (!gadget) otg->state = OTG_STATE_UNDEFINED; return 0; } static const struct phy_ops ops = { .owner = THIS_MODULE, }; static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata, struct cpcap_usb_ints_state *s) { int val, error; error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val); if (error) return error; s->id_ground = val & BIT(15); s->id_float = val & BIT(14); s->vbusov = val & BIT(11); error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val); if (error) return error; s->vbusvld = val & BIT(3); s->sessvld = val & BIT(2); s->sessend = val & BIT(1); s->se1 = val & BIT(0); error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val); if (error) return error; s->dm = val & BIT(1); s->dp = val & BIT(0); return 0; } static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata); static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata); static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata, enum musb_vbus_id_status status) { int error; error = musb_mailbox(status); if (!error) return; dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n", __func__, error); } static void cpcap_usb_detect(struct work_struct *work) { struct cpcap_phy_ddata *ddata; struct cpcap_usb_ints_state s; bool vbus = false; int error; ddata = container_of(work, struct cpcap_phy_ddata, detect_work.work); error = cpcap_phy_get_ints_state(ddata, &s); if (error) return; vbus = cpcap_usb_vbus_valid(ddata); /* We need to kick the VBUS as USB A-host */ if (s.id_ground && ddata->vbus_provider) { dev_dbg(ddata->dev, "still in USB A-host mode, kicking VBUS\n"); cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, CPCAP_BIT_VBUSSTBY_EN | CPCAP_BIT_VBUSEN_SPI, CPCAP_BIT_VBUSEN_SPI); if (error) goto out_err; return; } if (vbus && s.id_ground && ddata->docked) { dev_dbg(ddata->dev, "still docked as A-host, signal ID down\n"); cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); return; } /* No VBUS needed with docks */ if (vbus && s.id_ground && !ddata->vbus_provider) { dev_dbg(ddata->dev, "connected to a dock\n"); ddata->docked = true; error = cpcap_usb_set_usb_mode(ddata); if (error) goto out_err; cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); /* * Force check state again after musb has reoriented, * otherwise devices won't enumerate after loading PHY * driver. */ schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1000)); return; } if (s.id_ground && !ddata->docked) { dev_dbg(ddata->dev, "id ground, USB host mode\n"); ddata->vbus_provider = true; error = cpcap_usb_set_usb_mode(ddata); if (error) goto out_err; cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, CPCAP_BIT_VBUSSTBY_EN | CPCAP_BIT_VBUSEN_SPI, CPCAP_BIT_VBUSEN_SPI); if (error) goto out_err; return; } error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, CPCAP_BIT_VBUSSTBY_EN | CPCAP_BIT_VBUSEN_SPI, 0); if (error) goto out_err; vbus = cpcap_usb_vbus_valid(ddata); /* Otherwise assume we're connected to a USB host */ if (vbus) { dev_dbg(ddata->dev, "connected to USB host\n"); error = cpcap_usb_set_usb_mode(ddata); if (error) goto out_err; cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID); return; } ddata->vbus_provider = false; ddata->docked = false; cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF); /* Default to debug UART mode */ error = cpcap_usb_set_uart_mode(ddata); if (error) goto out_err; dev_dbg(ddata->dev, "set UART mode\n"); return; out_err: dev_err(ddata->dev, "error setting cable state: %i\n", error); } static irqreturn_t cpcap_phy_irq_thread(int irq, void *data) { struct cpcap_phy_ddata *ddata = data; if (!atomic_read(&ddata->active)) return IRQ_NONE; schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1)); return IRQ_HANDLED; } static int cpcap_usb_init_irq(struct platform_device *pdev, struct cpcap_phy_ddata *ddata, const char *name) { int irq, error; irq = platform_get_irq_byname(pdev, name); if (irq < 0) return -ENODEV; error = devm_request_threaded_irq(ddata->dev, irq, NULL, cpcap_phy_irq_thread, IRQF_SHARED, name, ddata); if (error) { dev_err(ddata->dev, "could not get irq %s: %i\n", name, error); return error; } return 0; } static const char * const cpcap_phy_irqs[] = { /* REG_INT_0 */ "id_ground", "id_float", /* REG_INT1 */ "se0conn", "vbusvld", "sessvld", "sessend", "se1", /* REG_INT_3 */ "dm", "dp", }; static int cpcap_usb_init_interrupts(struct platform_device *pdev, struct cpcap_phy_ddata *ddata) { int i, error; for (i = 0; i < ARRAY_SIZE(cpcap_phy_irqs); i++) { error = cpcap_usb_init_irq(pdev, ddata, cpcap_phy_irqs[i]); if (error) return error; } return 0; } /* * Optional pins and modes. At least Motorola mapphone devices * are using two GPIOs and dynamic pinctrl to multiplex PHY pins * to UART, ULPI or UTMI mode. */ static int cpcap_usb_gpio_set_mode(struct cpcap_phy_ddata *ddata, enum cpcap_gpio_mode mode) { if (!ddata->gpio[0] || !ddata->gpio[1]) return 0; gpiod_set_value(ddata->gpio[0], mode & 1); gpiod_set_value(ddata->gpio[1], mode >> 1); return 0; } static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata) { int error; /* Disable lines to prevent glitches from waking up mdm6600 */ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED); if (error) goto out_err; if (ddata->pins_uart) { error = pinctrl_select_state(ddata->pins, ddata->pins_uart); if (error) goto out_err; } error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1, CPCAP_BIT_VBUSPD, CPCAP_BIT_VBUSPD); if (error) goto out_err; error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2, 0xffff, CPCAP_BIT_UARTMUX0 | CPCAP_BIT_EMUMODE0); if (error) goto out_err; error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, 0x7fff, CPCAP_BIT_IDPU_SPI); if (error) goto out_err; /* Enable UART mode */ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP); if (error) goto out_err; return 0; out_err: dev_err(ddata->dev, "%s failed with %i\n", __func__, error); return error; } static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata) { int error; /* Disable lines to prevent glitches from waking up mdm6600 */ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED); if (error) return error; if (ddata->pins_utmi) { error = pinctrl_select_state(ddata->pins, ddata->pins_utmi); if (error) { dev_err(ddata->dev, "could not set usb mode: %i\n", error); return error; } } error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1, CPCAP_BIT_VBUSPD, 0); if (error) goto out_err; error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, CPCAP_BIT_PU_SPI | CPCAP_BIT_DMPD_SPI | CPCAP_BIT_DPPD_SPI | CPCAP_BIT_SUSPEND_SPI | CPCAP_BIT_ULPI_SPI_SEL, 0); if (error) goto out_err; error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2, CPCAP_BIT_USBXCVREN, CPCAP_BIT_USBXCVREN); if (error) goto out_err; /* Enable USB mode */ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP); if (error) goto out_err; return 0; out_err: dev_err(ddata->dev, "%s failed with %i\n", __func__, error); return error; } static int cpcap_usb_init_optional_pins(struct cpcap_phy_ddata *ddata) { ddata->pins = devm_pinctrl_get(ddata->dev); if (IS_ERR(ddata->pins)) { dev_info(ddata->dev, "default pins not configured: %ld\n", PTR_ERR(ddata->pins)); ddata->pins = NULL; return 0; } ddata->pins_ulpi = pinctrl_lookup_state(ddata->pins, "ulpi"); if (IS_ERR(ddata->pins_ulpi)) { dev_info(ddata->dev, "ulpi pins not configured\n"); ddata->pins_ulpi = NULL; } ddata->pins_utmi = pinctrl_lookup_state(ddata->pins, "utmi"); if (IS_ERR(ddata->pins_utmi)) { dev_info(ddata->dev, "utmi pins not configured\n"); ddata->pins_utmi = NULL; } ddata->pins_uart = pinctrl_lookup_state(ddata->pins, "uart"); if (IS_ERR(ddata->pins_uart)) { dev_info(ddata->dev, "uart pins not configured\n"); ddata->pins_uart = NULL; } if (ddata->pins_uart) return pinctrl_select_state(ddata->pins, ddata->pins_uart); return 0; } static void cpcap_usb_init_optional_gpios(struct cpcap_phy_ddata *ddata) { int i; for (i = 0; i < 2; i++) { ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode", i, GPIOD_OUT_HIGH); if (IS_ERR(ddata->gpio[i])) { dev_info(ddata->dev, "no mode change GPIO%i: %li\n", i, PTR_ERR(ddata->gpio[i])); ddata->gpio[i] = NULL; } } } static int cpcap_usb_init_iio(struct cpcap_phy_ddata *ddata) { enum iio_chan_type type; int error; ddata->vbus = devm_iio_channel_get(ddata->dev, "vbus"); if (IS_ERR(ddata->vbus)) { error = PTR_ERR(ddata->vbus); goto out_err; } if (!ddata->vbus->indio_dev) { error = -ENXIO; goto out_err; } error = iio_get_channel_type(ddata->vbus, &type); if (error < 0) goto out_err; if (type != IIO_VOLTAGE) { error = -EINVAL; goto out_err; } return 0; out_err: dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n", error); return error; } #ifdef CONFIG_OF static const struct of_device_id cpcap_usb_phy_id_table[] = { { .compatible = "motorola,cpcap-usb-phy", }, { .compatible = "motorola,mapphone-cpcap-usb-phy", }, {}, }; MODULE_DEVICE_TABLE(of, cpcap_usb_phy_id_table); #endif static int cpcap_usb_phy_probe(struct platform_device *pdev) { struct cpcap_phy_ddata *ddata; struct phy *generic_phy; struct phy_provider *phy_provider; struct usb_otg *otg; const struct of_device_id *of_id; int error; of_id = of_match_device(of_match_ptr(cpcap_usb_phy_id_table), &pdev->dev); if (!of_id) return -EINVAL; ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; ddata->reg = dev_get_regmap(pdev->dev.parent, NULL); if (!ddata->reg) return -ENODEV; otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); if (!otg) return -ENOMEM; ddata->dev = &pdev->dev; ddata->phy.dev = ddata->dev; ddata->phy.label = "cpcap_usb_phy"; ddata->phy.otg = otg; ddata->phy.type = USB_PHY_TYPE_USB2; otg->set_host = cpcap_usb_phy_set_host; otg->set_peripheral = cpcap_usb_phy_set_peripheral; otg->usb_phy = &ddata->phy; INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect); platform_set_drvdata(pdev, ddata); ddata->vusb = devm_regulator_get(&pdev->dev, "vusb"); if (IS_ERR(ddata->vusb)) return PTR_ERR(ddata->vusb); error = regulator_enable(ddata->vusb); if (error) return error; generic_phy = devm_phy_create(ddata->dev, NULL, &ops); if (IS_ERR(generic_phy)) { error = PTR_ERR(generic_phy); return PTR_ERR(generic_phy); } phy_set_drvdata(generic_phy, ddata); phy_provider = devm_of_phy_provider_register(ddata->dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); error = cpcap_usb_init_optional_pins(ddata); if (error) return error; cpcap_usb_init_optional_gpios(ddata); error = cpcap_usb_init_iio(ddata); if (error) return error; error = cpcap_usb_init_interrupts(pdev, ddata); if (error) return error; usb_add_phy_dev(&ddata->phy); atomic_set(&ddata->active, 1); schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1)); return 0; } static int cpcap_usb_phy_remove(struct platform_device *pdev) { struct cpcap_phy_ddata *ddata = platform_get_drvdata(pdev); int error; atomic_set(&ddata->active, 0); error = cpcap_usb_set_uart_mode(ddata); if (error) dev_err(ddata->dev, "could not set UART mode\n"); cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF); usb_remove_phy(&ddata->phy); cancel_delayed_work_sync(&ddata->detect_work); clk_unprepare(ddata->refclk); regulator_disable(ddata->vusb); return 0; } static struct platform_driver cpcap_usb_phy_driver = { .probe = cpcap_usb_phy_probe, .remove = cpcap_usb_phy_remove, .driver = { .name = "cpcap-usb-phy", .of_match_table = of_match_ptr(cpcap_usb_phy_id_table), }, }; module_platform_driver(cpcap_usb_phy_driver); MODULE_ALIAS("platform:cpcap_usb"); MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); MODULE_DESCRIPTION("CPCAP usb phy driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1