| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Heiko Stübner | 8746 | 44.99% | 31 | 29.52% |
| David Wu | 5805 | 29.86% | 17 | 16.19% |
| Jianqun Xu | 2469 | 12.70% | 1 | 0.95% |
| Andy Yan | 555 | 2.85% | 3 | 2.86% |
| Doug Anderson | 461 | 2.37% | 8 | 7.62% |
| Jeffy Chen | 302 | 1.55% | 2 | 1.90% |
| Huang Lin | 231 | 1.19% | 1 | 0.95% |
| Shawn Lin | 172 | 0.88% | 1 | 0.95% |
| Chris Zhong | 166 | 0.85% | 2 | 1.90% |
| John Keeping | 109 | 0.56% | 3 | 2.86% |
| Xing Zheng | 88 | 0.45% | 1 | 0.95% |
| Brian Norris | 64 | 0.33% | 2 | 1.90% |
| Sherman Yin | 61 | 0.31% | 1 | 0.95% |
| Caesar Wang | 50 | 0.26% | 1 | 0.95% |
| Sonny Rao | 34 | 0.17% | 1 | 0.95% |
| Axel Lin | 22 | 0.11% | 3 | 2.86% |
| Kees Cook | 20 | 0.10% | 1 | 0.95% |
| Julia Lawall | 12 | 0.06% | 1 | 0.95% |
| Linus Walleij | 12 | 0.06% | 4 | 3.81% |
| Masahiro Yamada | 9 | 0.05% | 1 | 0.95% |
| Thomas Gleixner | 9 | 0.05% | 4 | 3.81% |
| Matti Vaittinen | 8 | 0.04% | 1 | 0.95% |
| SF Markus Elfring | 6 | 0.03% | 2 | 1.90% |
| Wen Yang | 5 | 0.03% | 1 | 0.95% |
| Jiang Liu | 4 | 0.02% | 1 | 0.95% |
| Anders Roxell | 4 | 0.02% | 1 | 0.95% |
| Laxman Dewangan | 3 | 0.02% | 1 | 0.95% |
| Rob Herring | 3 | 0.02% | 1 | 0.95% |
| Sören Brinkmann | 2 | 0.01% | 1 | 0.95% |
| Jonas Gorski | 2 | 0.01% | 1 | 0.95% |
| Paul Gortmaker | 1 | 0.01% | 1 | 0.95% |
| Beniamino Galvani | 1 | 0.01% | 1 | 0.95% |
| Ben Dooks | 1 | 0.01% | 1 | 0.95% |
| abdoulaye berthe | 1 | 0.01% | 1 | 0.95% |
| Mika Westerberg | 1 | 0.01% | 1 | 0.95% |
| Arnd Bergmann | 1 | 0.01% | 1 | 0.95% |
| Total | 19440 | 105 |
// SPDX-License-Identifier: GPL-2.0-only /* * Pinctrl driver for Rockchip SoCs * * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * * With some ideas taken from pinctrl-samsung: * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * Copyright (c) 2012 Linaro Ltd * http://www.linaro.org * * and pinctrl-at91: * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/bitops.h> #include <linux/gpio/driver.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/irqchip/chained_irq.h> #include <linux/clk.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <dt-bindings/pinctrl/rockchip.h> #include "core.h" #include "pinconf.h" /* GPIO control registers */ #define GPIO_SWPORT_DR 0x00 #define GPIO_SWPORT_DDR 0x04 #define GPIO_INTEN 0x30 #define GPIO_INTMASK 0x34 #define GPIO_INTTYPE_LEVEL 0x38 #define GPIO_INT_POLARITY 0x3c #define GPIO_INT_STATUS 0x40 #define GPIO_INT_RAWSTATUS 0x44 #define GPIO_DEBOUNCE 0x48 #define GPIO_PORTS_EOI 0x4c #define GPIO_EXT_PORT 0x50 #define GPIO_LS_SYNC 0x60 enum rockchip_pinctrl_type { PX30, RV1108, RK2928, RK3066B, RK3128, RK3188, RK3288, RK3308, RK3368, RK3399, }; /** * Encode variants of iomux registers into a type variable */ #define IOMUX_GPIO_ONLY BIT(0) #define IOMUX_WIDTH_4BIT BIT(1) #define IOMUX_SOURCE_PMU BIT(2) #define IOMUX_UNROUTED BIT(3) #define IOMUX_WIDTH_3BIT BIT(4) #define IOMUX_WIDTH_2BIT BIT(5) /** * @type: iomux variant using IOMUX_* constants * @offset: if initialized to -1 it will be autocalculated, by specifying * an initial offset value the relevant source offset can be reset * to a new value for autocalculating the following iomux registers. */ struct rockchip_iomux { int type; int offset; }; /** * enum type index corresponding to rockchip_perpin_drv_list arrays index. */ enum rockchip_pin_drv_type { DRV_TYPE_IO_DEFAULT = 0, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_ONLY, DRV_TYPE_IO_1V8_3V0_AUTO, DRV_TYPE_IO_3V3_ONLY, DRV_TYPE_MAX }; /** * enum type index corresponding to rockchip_pull_list arrays index. */ enum rockchip_pin_pull_type { PULL_TYPE_IO_DEFAULT = 0, PULL_TYPE_IO_1V8_ONLY, PULL_TYPE_MAX }; /** * @drv_type: drive strength variant using rockchip_perpin_drv_type * @offset: if initialized to -1 it will be autocalculated, by specifying * an initial offset value the relevant source offset can be reset * to a new value for autocalculating the following drive strength * registers. if used chips own cal_drv func instead to calculate * registers offset, the variant could be ignored. */ struct rockchip_drv { enum rockchip_pin_drv_type drv_type; int offset; }; /** * @reg_base: register base of the gpio bank * @reg_pull: optional separate register for additional pull settings * @clk: clock of the gpio bank * @irq: interrupt of the gpio bank * @saved_masks: Saved content of GPIO_INTEN at suspend time. * @pin_base: first pin number * @nr_pins: number of pins in this bank * @name: name of the bank * @bank_num: number of the bank, to account for holes * @iomux: array describing the 4 iomux sources of the bank * @drv: array describing the 4 drive strength sources of the bank * @pull_type: array describing the 4 pull type sources of the bank * @valid: is all necessary information present * @of_node: dt node of this bank * @drvdata: common pinctrl basedata * @domain: irqdomain of the gpio bank * @gpio_chip: gpiolib chip * @grange: gpio range * @slock: spinlock for the gpio bank * @route_mask: bits describing the routing pins of per bank */ struct rockchip_pin_bank { void __iomem *reg_base; struct regmap *regmap_pull; struct clk *clk; int irq; u32 saved_masks; u32 pin_base; u8 nr_pins; char *name; u8 bank_num; struct rockchip_iomux iomux[4]; struct rockchip_drv drv[4]; enum rockchip_pin_pull_type pull_type[4]; bool valid; struct device_node *of_node; struct rockchip_pinctrl *drvdata; struct irq_domain *domain; struct gpio_chip gpio_chip; struct pinctrl_gpio_range grange; raw_spinlock_t slock; u32 toggle_edge_mode; u32 recalced_mask; u32 route_mask; }; #define PIN_BANK(id, pins, label) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ }, \ } #define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .type = iom0, .offset = -1 }, \ { .type = iom1, .offset = -1 }, \ { .type = iom2, .offset = -1 }, \ { .type = iom3, .offset = -1 }, \ }, \ } #define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ }, \ .drv = { \ { .drv_type = type0, .offset = -1 }, \ { .drv_type = type1, .offset = -1 }, \ { .drv_type = type2, .offset = -1 }, \ { .drv_type = type3, .offset = -1 }, \ }, \ } #define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \ drv2, drv3, pull0, pull1, \ pull2, pull3) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ { .offset = -1 }, \ }, \ .drv = { \ { .drv_type = drv0, .offset = -1 }, \ { .drv_type = drv1, .offset = -1 }, \ { .drv_type = drv2, .offset = -1 }, \ { .drv_type = drv3, .offset = -1 }, \ }, \ .pull_type[0] = pull0, \ .pull_type[1] = pull1, \ .pull_type[2] = pull2, \ .pull_type[3] = pull3, \ } #define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \ iom2, iom3, drv0, drv1, drv2, \ drv3, offset0, offset1, \ offset2, offset3) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .type = iom0, .offset = -1 }, \ { .type = iom1, .offset = -1 }, \ { .type = iom2, .offset = -1 }, \ { .type = iom3, .offset = -1 }, \ }, \ .drv = { \ { .drv_type = drv0, .offset = offset0 }, \ { .drv_type = drv1, .offset = offset1 }, \ { .drv_type = drv2, .offset = offset2 }, \ { .drv_type = drv3, .offset = offset3 }, \ }, \ } #define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \ label, iom0, iom1, iom2, \ iom3, drv0, drv1, drv2, \ drv3, offset0, offset1, \ offset2, offset3, pull0, \ pull1, pull2, pull3) \ { \ .bank_num = id, \ .nr_pins = pins, \ .name = label, \ .iomux = { \ { .type = iom0, .offset = -1 }, \ { .type = iom1, .offset = -1 }, \ { .type = iom2, .offset = -1 }, \ { .type = iom3, .offset = -1 }, \ }, \ .drv = { \ { .drv_type = drv0, .offset = offset0 }, \ { .drv_type = drv1, .offset = offset1 }, \ { .drv_type = drv2, .offset = offset2 }, \ { .drv_type = drv3, .offset = offset3 }, \ }, \ .pull_type[0] = pull0, \ .pull_type[1] = pull1, \ .pull_type[2] = pull2, \ .pull_type[3] = pull3, \ } /** * struct rockchip_mux_recalced_data: represent a pin iomux data. * @num: bank number. * @pin: pin number. * @bit: index at register. * @reg: register offset. * @mask: mask bit */ struct rockchip_mux_recalced_data { u8 num; u8 pin; u32 reg; u8 bit; u8 mask; }; enum rockchip_mux_route_location { ROCKCHIP_ROUTE_SAME = 0, ROCKCHIP_ROUTE_PMU, ROCKCHIP_ROUTE_GRF, }; /** * struct rockchip_mux_recalced_data: represent a pin iomux data. * @bank_num: bank number. * @pin: index at register or used to calc index. * @func: the min pin. * @route_offset: the max pin. * @route_val: the register offset. */ struct rockchip_mux_route_data { u8 bank_num; u8 pin; u8 func; enum rockchip_mux_route_location route_location; u32 route_offset; u32 route_val; }; /** */ struct rockchip_pin_ctrl { struct rockchip_pin_bank *pin_banks; u32 nr_banks; u32 nr_pins; char *label; enum rockchip_pinctrl_type type; int grf_mux_offset; int pmu_mux_offset; int grf_drv_offset; int pmu_drv_offset; struct rockchip_mux_recalced_data *iomux_recalced; u32 niomux_recalced; struct rockchip_mux_route_data *iomux_routes; u32 niomux_routes; void (*pull_calc_reg)(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit); void (*drv_calc_reg)(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit); int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit); }; struct rockchip_pin_config { unsigned int func; unsigned long *configs; unsigned int nconfigs; }; /** * struct rockchip_pin_group: represent group of pins of a pinmux function. * @name: name of the pin group, used to lookup the group. * @pins: the pins included in this group. * @npins: number of pins included in this group. * @func: the mux function number to be programmed when selected. * @configs: the config values to be set for each pin * @nconfigs: number of configs for each pin */ struct rockchip_pin_group { const char *name; unsigned int npins; unsigned int *pins; struct rockchip_pin_config *data; }; /** * struct rockchip_pmx_func: represent a pin function. * @name: name of the pin function, used to lookup the function. * @groups: one or more names of pin groups that provide this function. * @num_groups: number of groups included in @groups. */ struct rockchip_pmx_func { const char *name; const char **groups; u8 ngroups; }; struct rockchip_pinctrl { struct regmap *regmap_base; int reg_size; struct regmap *regmap_pull; struct regmap *regmap_pmu; struct device *dev; struct rockchip_pin_ctrl *ctrl; struct pinctrl_desc pctl; struct pinctrl_dev *pctl_dev; struct rockchip_pin_group *groups; unsigned int ngroups; struct rockchip_pmx_func *functions; unsigned int nfunctions; }; static struct regmap_config rockchip_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; static inline const struct rockchip_pin_group *pinctrl_name_to_group( const struct rockchip_pinctrl *info, const char *name) { int i; for (i = 0; i < info->ngroups; i++) { if (!strcmp(info->groups[i].name, name)) return &info->groups[i]; } return NULL; } /* * given a pin number that is local to a pin controller, find out the pin bank * and the register base of the pin bank. */ static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info, unsigned pin) { struct rockchip_pin_bank *b = info->ctrl->pin_banks; while (pin >= (b->pin_base + b->nr_pins)) b++; return b; } static struct rockchip_pin_bank *bank_num_to_bank( struct rockchip_pinctrl *info, unsigned num) { struct rockchip_pin_bank *b = info->ctrl->pin_banks; int i; for (i = 0; i < info->ctrl->nr_banks; i++, b++) { if (b->bank_num == num) return b; } return ERR_PTR(-EINVAL); } /* * Pinctrl_ops handling */ static int rockchip_get_groups_count(struct pinctrl_dev *pctldev) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); return info->ngroups; } static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev, unsigned selector) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); return info->groups[selector].name; } static int rockchip_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, const unsigned **pins, unsigned *npins) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); if (selector >= info->ngroups) return -EINVAL; *pins = info->groups[selector].pins; *npins = info->groups[selector].npins; return 0; } static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map, unsigned *num_maps) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); const struct rockchip_pin_group *grp; struct pinctrl_map *new_map; struct device_node *parent; int map_num = 1; int i; /* * first find the group of this node and check if we need to create * config maps for pins */ grp = pinctrl_name_to_group(info, np->name); if (!grp) { dev_err(info->dev, "unable to find group for node %pOFn\n", np); return -EINVAL; } map_num += grp->npins; new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), GFP_KERNEL); if (!new_map) return -ENOMEM; *map = new_map; *num_maps = map_num; /* create mux map */ parent = of_get_parent(np); if (!parent) { devm_kfree(pctldev->dev, new_map); return -EINVAL; } new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; new_map[0].data.mux.function = parent->name; new_map[0].data.mux.group = np->name; of_node_put(parent); /* create config map */ new_map++; for (i = 0; i < grp->npins; i++) { new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; new_map[i].data.configs.group_or_pin = pin_get_name(pctldev, grp->pins[i]); new_map[i].data.configs.configs = grp->data[i].configs; new_map[i].data.configs.num_configs = grp->data[i].nconfigs; } dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", (*map)->data.mux.function, (*map)->data.mux.group, map_num); return 0; } static void rockchip_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps) { } static const struct pinctrl_ops rockchip_pctrl_ops = { .get_groups_count = rockchip_get_groups_count, .get_group_name = rockchip_get_group_name, .get_group_pins = rockchip_get_group_pins, .dt_node_to_map = rockchip_dt_node_to_map, .dt_free_map = rockchip_dt_free_map, }; /* * Hardware access */ static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = { { .num = 1, .pin = 0, .reg = 0x418, .bit = 0, .mask = 0x3 }, { .num = 1, .pin = 1, .reg = 0x418, .bit = 2, .mask = 0x3 }, { .num = 1, .pin = 2, .reg = 0x418, .bit = 4, .mask = 0x3 }, { .num = 1, .pin = 3, .reg = 0x418, .bit = 6, .mask = 0x3 }, { .num = 1, .pin = 4, .reg = 0x418, .bit = 8, .mask = 0x3 }, { .num = 1, .pin = 5, .reg = 0x418, .bit = 10, .mask = 0x3 }, { .num = 1, .pin = 6, .reg = 0x418, .bit = 12, .mask = 0x3 }, { .num = 1, .pin = 7, .reg = 0x418, .bit = 14, .mask = 0x3 }, { .num = 1, .pin = 8, .reg = 0x41c, .bit = 0, .mask = 0x3 }, { .num = 1, .pin = 9, .reg = 0x41c, .bit = 2, .mask = 0x3 }, }; static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = { { .num = 2, .pin = 20, .reg = 0xe8, .bit = 0, .mask = 0x7 }, { .num = 2, .pin = 21, .reg = 0xe8, .bit = 4, .mask = 0x7 }, { .num = 2, .pin = 22, .reg = 0xe8, .bit = 8, .mask = 0x7 }, { .num = 2, .pin = 23, .reg = 0xe8, .bit = 12, .mask = 0x7 }, { .num = 2, .pin = 24, .reg = 0xd4, .bit = 12, .mask = 0x7 }, }; static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = { { .num = 1, .pin = 14, .reg = 0x28, .bit = 12, .mask = 0xf }, { .num = 1, .pin = 15, .reg = 0x2c, .bit = 0, .mask = 0x3 }, { .num = 1, .pin = 18, .reg = 0x30, .bit = 4, .mask = 0xf }, { .num = 1, .pin = 19, .reg = 0x30, .bit = 8, .mask = 0xf }, { .num = 1, .pin = 20, .reg = 0x30, .bit = 12, .mask = 0xf }, { .num = 1, .pin = 21, .reg = 0x34, .bit = 0, .mask = 0xf }, { .num = 1, .pin = 22, .reg = 0x34, .bit = 4, .mask = 0xf }, { .num = 1, .pin = 23, .reg = 0x34, .bit = 8, .mask = 0xf }, { .num = 3, .pin = 12, .reg = 0x68, .bit = 8, .mask = 0xf }, { .num = 3, .pin = 13, .reg = 0x68, .bit = 12, .mask = 0xf }, { .num = 2, .pin = 2, .reg = 0x608, .bit = 0, .mask = 0x7 }, { .num = 2, .pin = 3, .reg = 0x608, .bit = 4, .mask = 0x7 }, { .num = 2, .pin = 16, .reg = 0x610, .bit = 8, .mask = 0x7 }, { .num = 3, .pin = 10, .reg = 0x610, .bit = 0, .mask = 0x7 }, { .num = 3, .pin = 11, .reg = 0x610, .bit = 4, .mask = 0x7 }, }; static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = { { .num = 2, .pin = 12, .reg = 0x24, .bit = 8, .mask = 0x3 }, { .num = 2, .pin = 15, .reg = 0x28, .bit = 0, .mask = 0x7 }, { .num = 2, .pin = 23, .reg = 0x30, .bit = 14, .mask = 0x3 }, }; static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, int *reg, u8 *bit, int *mask) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct rockchip_mux_recalced_data *data; int i; for (i = 0; i < ctrl->niomux_recalced; i++) { data = &ctrl->iomux_recalced[i]; if (data->num == bank->bank_num && data->pin == pin) break; } if (i >= ctrl->niomux_recalced) return; *reg = data->reg; *mask = data->mask; *bit = data->bit; } static struct rockchip_mux_route_data px30_mux_route_data[] = { { /* cif-d2m0 */ .bank_num = 2, .pin = 0, .func = 1, .route_offset = 0x184, .route_val = BIT(16 + 7), }, { /* cif-d2m1 */ .bank_num = 3, .pin = 3, .func = 3, .route_offset = 0x184, .route_val = BIT(16 + 7) | BIT(7), }, { /* pdm-m0 */ .bank_num = 3, .pin = 22, .func = 2, .route_offset = 0x184, .route_val = BIT(16 + 8), }, { /* pdm-m1 */ .bank_num = 2, .pin = 22, .func = 1, .route_offset = 0x184, .route_val = BIT(16 + 8) | BIT(8), }, { /* uart2-rxm0 */ .bank_num = 1, .pin = 27, .func = 2, .route_offset = 0x184, .route_val = BIT(16 + 10), }, { /* uart2-rxm1 */ .bank_num = 2, .pin = 14, .func = 2, .route_offset = 0x184, .route_val = BIT(16 + 10) | BIT(10), }, { /* uart3-rxm0 */ .bank_num = 0, .pin = 17, .func = 2, .route_offset = 0x184, .route_val = BIT(16 + 9), }, { /* uart3-rxm1 */ .bank_num = 1, .pin = 15, .func = 2, .route_offset = 0x184, .route_val = BIT(16 + 9) | BIT(9), }, }; static struct rockchip_mux_route_data rk3128_mux_route_data[] = { { /* spi-0 */ .bank_num = 1, .pin = 10, .func = 1, .route_offset = 0x144, .route_val = BIT(16 + 3) | BIT(16 + 4), }, { /* spi-1 */ .bank_num = 1, .pin = 27, .func = 3, .route_offset = 0x144, .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3), }, { /* spi-2 */ .bank_num = 0, .pin = 13, .func = 2, .route_offset = 0x144, .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4), }, { /* i2s-0 */ .bank_num = 1, .pin = 5, .func = 1, .route_offset = 0x144, .route_val = BIT(16 + 5), }, { /* i2s-1 */ .bank_num = 0, .pin = 14, .func = 1, .route_offset = 0x144, .route_val = BIT(16 + 5) | BIT(5), }, { /* emmc-0 */ .bank_num = 1, .pin = 22, .func = 2, .route_offset = 0x144, .route_val = BIT(16 + 6), }, { /* emmc-1 */ .bank_num = 2, .pin = 4, .func = 2, .route_offset = 0x144, .route_val = BIT(16 + 6) | BIT(6), }, }; static struct rockchip_mux_route_data rk3188_mux_route_data[] = { { /* non-iomuxed emmc/flash pins on flash-dqs */ .bank_num = 0, .pin = 24, .func = 1, .route_location = ROCKCHIP_ROUTE_GRF, .route_offset = 0xa0, .route_val = BIT(16 + 11), }, { /* non-iomuxed emmc/flash pins on emmc-clk */ .bank_num = 0, .pin = 24, .func = 2, .route_location = ROCKCHIP_ROUTE_GRF, .route_offset = 0xa0, .route_val = BIT(16 + 11) | BIT(11), }, }; static struct rockchip_mux_route_data rk3228_mux_route_data[] = { { /* pwm0-0 */ .bank_num = 0, .pin = 26, .func = 1, .route_offset = 0x50, .route_val = BIT(16), }, { /* pwm0-1 */ .bank_num = 3, .pin = 21, .func = 1, .route_offset = 0x50, .route_val = BIT(16) | BIT(0), }, { /* pwm1-0 */ .bank_num = 0, .pin = 27, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 1), }, { /* pwm1-1 */ .bank_num = 0, .pin = 30, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 1) | BIT(1), }, { /* pwm2-0 */ .bank_num = 0, .pin = 28, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 2), }, { /* pwm2-1 */ .bank_num = 1, .pin = 12, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 2) | BIT(2), }, { /* pwm3-0 */ .bank_num = 3, .pin = 26, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 3), }, { /* pwm3-1 */ .bank_num = 1, .pin = 11, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 3) | BIT(3), }, { /* sdio-0_d0 */ .bank_num = 1, .pin = 1, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 4), }, { /* sdio-1_d0 */ .bank_num = 3, .pin = 2, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 4) | BIT(4), }, { /* spi-0_rx */ .bank_num = 0, .pin = 13, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 5), }, { /* spi-1_rx */ .bank_num = 2, .pin = 0, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 5) | BIT(5), }, { /* emmc-0_cmd */ .bank_num = 1, .pin = 22, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 7), }, { /* emmc-1_cmd */ .bank_num = 2, .pin = 4, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 7) | BIT(7), }, { /* uart2-0_rx */ .bank_num = 1, .pin = 19, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 8), }, { /* uart2-1_rx */ .bank_num = 1, .pin = 10, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 8) | BIT(8), }, { /* uart1-0_rx */ .bank_num = 1, .pin = 10, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 11), }, { /* uart1-1_rx */ .bank_num = 3, .pin = 13, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 11) | BIT(11), }, }; static struct rockchip_mux_route_data rk3288_mux_route_data[] = { { /* edphdmi_cecinoutt1 */ .bank_num = 7, .pin = 16, .func = 2, .route_offset = 0x264, .route_val = BIT(16 + 12) | BIT(12), }, { /* edphdmi_cecinout */ .bank_num = 7, .pin = 23, .func = 4, .route_offset = 0x264, .route_val = BIT(16 + 12), }, }; static struct rockchip_mux_route_data rk3308_mux_route_data[] = { { /* rtc_clk */ .bank_num = 0, .pin = 19, .func = 1, .route_offset = 0x314, .route_val = BIT(16 + 0) | BIT(0), }, { /* uart2_rxm0 */ .bank_num = 1, .pin = 22, .func = 2, .route_offset = 0x314, .route_val = BIT(16 + 2) | BIT(16 + 3), }, { /* uart2_rxm1 */ .bank_num = 4, .pin = 26, .func = 2, .route_offset = 0x314, .route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2), }, { /* i2c3_sdam0 */ .bank_num = 0, .pin = 15, .func = 2, .route_offset = 0x608, .route_val = BIT(16 + 8) | BIT(16 + 9), }, { /* i2c3_sdam1 */ .bank_num = 3, .pin = 12, .func = 2, .route_offset = 0x608, .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8), }, { /* i2c3_sdam2 */ .bank_num = 2, .pin = 0, .func = 3, .route_offset = 0x608, .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9), }, { /* i2s-8ch-1-sclktxm0 */ .bank_num = 1, .pin = 3, .func = 2, .route_offset = 0x308, .route_val = BIT(16 + 3), }, { /* i2s-8ch-1-sclkrxm0 */ .bank_num = 1, .pin = 4, .func = 2, .route_offset = 0x308, .route_val = BIT(16 + 3), }, { /* i2s-8ch-1-sclktxm1 */ .bank_num = 1, .pin = 13, .func = 2, .route_offset = 0x308, .route_val = BIT(16 + 3) | BIT(3), }, { /* i2s-8ch-1-sclkrxm1 */ .bank_num = 1, .pin = 14, .func = 2, .route_offset = 0x308, .route_val = BIT(16 + 3) | BIT(3), }, { /* pdm-clkm0 */ .bank_num = 1, .pin = 4, .func = 3, .route_offset = 0x308, .route_val = BIT(16 + 12) | BIT(16 + 13), }, { /* pdm-clkm1 */ .bank_num = 1, .pin = 14, .func = 4, .route_offset = 0x308, .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), }, { /* pdm-clkm2 */ .bank_num = 2, .pin = 6, .func = 2, .route_offset = 0x308, .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), }, { /* pdm-clkm-m2 */ .bank_num = 2, .pin = 4, .func = 3, .route_offset = 0x600, .route_val = BIT(16 + 2) | BIT(2), }, { /* spi1_miso */ .bank_num = 3, .pin = 10, .func = 3, .route_offset = 0x314, .route_val = BIT(16 + 9), }, { /* spi1_miso_m1 */ .bank_num = 2, .pin = 4, .func = 2, .route_offset = 0x314, .route_val = BIT(16 + 9) | BIT(9), }, { /* owire_m0 */ .bank_num = 0, .pin = 11, .func = 3, .route_offset = 0x314, .route_val = BIT(16 + 10) | BIT(16 + 11), }, { /* owire_m1 */ .bank_num = 1, .pin = 22, .func = 7, .route_offset = 0x314, .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), }, { /* owire_m2 */ .bank_num = 2, .pin = 2, .func = 5, .route_offset = 0x314, .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), }, { /* can_rxd_m0 */ .bank_num = 0, .pin = 11, .func = 2, .route_offset = 0x314, .route_val = BIT(16 + 12) | BIT(16 + 13), }, { /* can_rxd_m1 */ .bank_num = 1, .pin = 22, .func = 5, .route_offset = 0x314, .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), }, { /* can_rxd_m2 */ .bank_num = 2, .pin = 2, .func = 4, .route_offset = 0x314, .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), }, { /* mac_rxd0_m0 */ .bank_num = 1, .pin = 20, .func = 3, .route_offset = 0x314, .route_val = BIT(16 + 14), }, { /* mac_rxd0_m1 */ .bank_num = 4, .pin = 2, .func = 2, .route_offset = 0x314, .route_val = BIT(16 + 14) | BIT(14), }, { /* uart3_rx */ .bank_num = 3, .pin = 12, .func = 4, .route_offset = 0x314, .route_val = BIT(16 + 15), }, { /* uart3_rx_m1 */ .bank_num = 0, .pin = 17, .func = 3, .route_offset = 0x314, .route_val = BIT(16 + 15) | BIT(15), }, }; static struct rockchip_mux_route_data rk3328_mux_route_data[] = { { /* uart2dbg_rxm0 */ .bank_num = 1, .pin = 1, .func = 2, .route_offset = 0x50, .route_val = BIT(16) | BIT(16 + 1), }, { /* uart2dbg_rxm1 */ .bank_num = 2, .pin = 1, .func = 1, .route_offset = 0x50, .route_val = BIT(16) | BIT(16 + 1) | BIT(0), }, { /* gmac-m1_rxd0 */ .bank_num = 1, .pin = 11, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 2) | BIT(2), }, { /* gmac-m1-optimized_rxd3 */ .bank_num = 1, .pin = 14, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 10) | BIT(10), }, { /* pdm_sdi0m0 */ .bank_num = 2, .pin = 19, .func = 2, .route_offset = 0x50, .route_val = BIT(16 + 3), }, { /* pdm_sdi0m1 */ .bank_num = 1, .pin = 23, .func = 3, .route_offset = 0x50, .route_val = BIT(16 + 3) | BIT(3), }, { /* spi_rxdm2 */ .bank_num = 3, .pin = 2, .func = 4, .route_offset = 0x50, .route_val = BIT(16 + 4) | BIT(16 + 5) | BIT(5), }, { /* i2s2_sdim0 */ .bank_num = 1, .pin = 24, .func = 1, .route_offset = 0x50, .route_val = BIT(16 + 6), }, { /* i2s2_sdim1 */ .bank_num = 3, .pin = 2, .func = 6, .route_offset = 0x50, .route_val = BIT(16 + 6) | BIT(6), }, { /* card_iom1 */ .bank_num = 2, .pin = 22, .func = 3, .route_offset = 0x50, .route_val = BIT(16 + 7) | BIT(7), }, { /* tsp_d5m1 */ .bank_num = 2, .pin = 16, .func = 3, .route_offset = 0x50, .route_val = BIT(16 + 8) | BIT(8), }, { /* cif_data5m1 */ .bank_num = 2, .pin = 16, .func = 4, .route_offset = 0x50, .route_val = BIT(16 + 9) | BIT(9), }, }; static struct rockchip_mux_route_data rk3399_mux_route_data[] = { { /* uart2dbga_rx */ .bank_num = 4, .pin = 8, .func = 2, .route_offset = 0xe21c, .route_val = BIT(16 + 10) | BIT(16 + 11), }, { /* uart2dbgb_rx */ .bank_num = 4, .pin = 16, .func = 2, .route_offset = 0xe21c, .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), }, { /* uart2dbgc_rx */ .bank_num = 4, .pin = 19, .func = 1, .route_offset = 0xe21c, .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), }, { /* pcie_clkreqn */ .bank_num = 2, .pin = 26, .func = 2, .route_offset = 0xe21c, .route_val = BIT(16 + 14), }, { /* pcie_clkreqnb */ .bank_num = 4, .pin = 24, .func = 1, .route_offset = 0xe21c, .route_val = BIT(16 + 14) | BIT(14), }, }; static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin, int mux, u32 *loc, u32 *reg, u32 *value) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct rockchip_mux_route_data *data; int i; for (i = 0; i < ctrl->niomux_routes; i++) { data = &ctrl->iomux_routes[i]; if ((data->bank_num == bank->bank_num) && (data->pin == pin) && (data->func == mux)) break; } if (i >= ctrl->niomux_routes) return false; *loc = data->route_location; *reg = data->route_offset; *value = data->route_val; return true; } static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) { struct rockchip_pinctrl *info = bank->drvdata; int iomux_num = (pin / 8); struct regmap *regmap; unsigned int val; int reg, ret, mask, mux_type; u8 bit; if (iomux_num > 3) return -EINVAL; if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { dev_err(info->dev, "pin %d is unrouted\n", pin); return -EINVAL; } if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) return RK_FUNC_GPIO; regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) ? info->regmap_pmu : info->regmap_base; /* get basic quadrupel of mux registers and the correct reg inside */ mux_type = bank->iomux[iomux_num].type; reg = bank->iomux[iomux_num].offset; if (mux_type & IOMUX_WIDTH_4BIT) { if ((pin % 8) >= 4) reg += 0x4; bit = (pin % 4) * 4; mask = 0xf; } else if (mux_type & IOMUX_WIDTH_3BIT) { if ((pin % 8) >= 5) reg += 0x4; bit = (pin % 8 % 5) * 3; mask = 0x7; } else { bit = (pin % 8) * 2; mask = 0x3; } if (bank->recalced_mask & BIT(pin)) rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); ret = regmap_read(regmap, reg, &val); if (ret) return ret; return ((val >> bit) & mask); } static int rockchip_verify_mux(struct rockchip_pin_bank *bank, int pin, int mux) { struct rockchip_pinctrl *info = bank->drvdata; int iomux_num = (pin / 8); if (iomux_num > 3) return -EINVAL; if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { dev_err(info->dev, "pin %d is unrouted\n", pin); return -EINVAL; } if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) { if (mux != RK_FUNC_GPIO) { dev_err(info->dev, "pin %d only supports a gpio mux\n", pin); return -ENOTSUPP; } } return 0; } /* * Set a new mux function for a pin. * * The register is divided into the upper and lower 16 bit. When changing * a value, the previous register value is not read and changed. Instead * it seems the changed bits are marked in the upper 16 bit, while the * changed value gets set in the same offset in the lower 16 bit. * All pin settings seem to be 2 bit wide in both the upper and lower * parts. * @bank: pin bank to change * @pin: pin to change * @mux: new mux function to set */ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) { struct rockchip_pinctrl *info = bank->drvdata; int iomux_num = (pin / 8); struct regmap *regmap; int reg, ret, mask, mux_type; u8 bit; u32 data, rmask, route_location, route_reg, route_val; ret = rockchip_verify_mux(bank, pin, mux); if (ret < 0) return ret; if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) return 0; dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux); regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) ? info->regmap_pmu : info->regmap_base; /* get basic quadrupel of mux registers and the correct reg inside */ mux_type = bank->iomux[iomux_num].type; reg = bank->iomux[iomux_num].offset; if (mux_type & IOMUX_WIDTH_4BIT) { if ((pin % 8) >= 4) reg += 0x4; bit = (pin % 4) * 4; mask = 0xf; } else if (mux_type & IOMUX_WIDTH_3BIT) { if ((pin % 8) >= 5) reg += 0x4; bit = (pin % 8 % 5) * 3; mask = 0x7; } else { bit = (pin % 8) * 2; mask = 0x3; } if (bank->recalced_mask & BIT(pin)) rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); if (bank->route_mask & BIT(pin)) { if (rockchip_get_mux_route(bank, pin, mux, &route_location, &route_reg, &route_val)) { struct regmap *route_regmap = regmap; /* handle special locations */ switch (route_location) { case ROCKCHIP_ROUTE_PMU: route_regmap = info->regmap_pmu; break; case ROCKCHIP_ROUTE_GRF: route_regmap = info->regmap_base; break; } ret = regmap_write(route_regmap, route_reg, route_val); if (ret) return ret; } } data = (mask << (bit + 16)); rmask = data | (data >> 16); data |= (mux & mask) << bit; ret = regmap_update_bits(regmap, reg, rmask, data); return ret; } #define PX30_PULL_PMU_OFFSET 0x10 #define PX30_PULL_GRF_OFFSET 0x60 #define PX30_PULL_BITS_PER_PIN 2 #define PX30_PULL_PINS_PER_REG 8 #define PX30_PULL_BANK_STRIDE 16 static void px30_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 32 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = PX30_PULL_PMU_OFFSET; } else { *regmap = info->regmap_base; *reg = PX30_PULL_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * PX30_PULL_BANK_STRIDE; } *reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4); *bit = (pin_num % PX30_PULL_PINS_PER_REG); *bit *= PX30_PULL_BITS_PER_PIN; } #define PX30_DRV_PMU_OFFSET 0x20 #define PX30_DRV_GRF_OFFSET 0xf0 #define PX30_DRV_BITS_PER_PIN 2 #define PX30_DRV_PINS_PER_REG 8 #define PX30_DRV_BANK_STRIDE 16 static void px30_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 32 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = PX30_DRV_PMU_OFFSET; } else { *regmap = info->regmap_base; *reg = PX30_DRV_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * PX30_DRV_BANK_STRIDE; } *reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4); *bit = (pin_num % PX30_DRV_PINS_PER_REG); *bit *= PX30_DRV_BITS_PER_PIN; } #define PX30_SCHMITT_PMU_OFFSET 0x38 #define PX30_SCHMITT_GRF_OFFSET 0xc0 #define PX30_SCHMITT_PINS_PER_PMU_REG 16 #define PX30_SCHMITT_BANK_STRIDE 16 #define PX30_SCHMITT_PINS_PER_GRF_REG 8 static int px30_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; int pins_per_reg; if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = PX30_SCHMITT_PMU_OFFSET; pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG; } else { *regmap = info->regmap_base; *reg = PX30_SCHMITT_GRF_OFFSET; pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG; *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE; } *reg += ((pin_num / pins_per_reg) * 4); *bit = pin_num % pins_per_reg; return 0; } #define RV1108_PULL_PMU_OFFSET 0x10 #define RV1108_PULL_OFFSET 0x110 #define RV1108_PULL_PINS_PER_REG 8 #define RV1108_PULL_BITS_PER_PIN 2 #define RV1108_PULL_BANK_STRIDE 16 static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 24 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RV1108_PULL_PMU_OFFSET; } else { *reg = RV1108_PULL_OFFSET; *regmap = info->regmap_base; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE; } *reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RV1108_PULL_PINS_PER_REG); *bit *= RV1108_PULL_BITS_PER_PIN; } #define RV1108_DRV_PMU_OFFSET 0x20 #define RV1108_DRV_GRF_OFFSET 0x210 #define RV1108_DRV_BITS_PER_PIN 2 #define RV1108_DRV_PINS_PER_REG 8 #define RV1108_DRV_BANK_STRIDE 16 static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 24 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RV1108_DRV_PMU_OFFSET; } else { *regmap = info->regmap_base; *reg = RV1108_DRV_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE; } *reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4); *bit = pin_num % RV1108_DRV_PINS_PER_REG; *bit *= RV1108_DRV_BITS_PER_PIN; } #define RV1108_SCHMITT_PMU_OFFSET 0x30 #define RV1108_SCHMITT_GRF_OFFSET 0x388 #define RV1108_SCHMITT_BANK_STRIDE 8 #define RV1108_SCHMITT_PINS_PER_GRF_REG 16 #define RV1108_SCHMITT_PINS_PER_PMU_REG 8 static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; int pins_per_reg; if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RV1108_SCHMITT_PMU_OFFSET; pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG; } else { *regmap = info->regmap_base; *reg = RV1108_SCHMITT_GRF_OFFSET; pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG; *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE; } *reg += ((pin_num / pins_per_reg) * 4); *bit = pin_num % pins_per_reg; return 0; } #define RK3308_SCHMITT_PINS_PER_REG 8 #define RK3308_SCHMITT_BANK_STRIDE 16 #define RK3308_SCHMITT_GRF_OFFSET 0x1a0 static int rk3308_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3308_SCHMITT_GRF_OFFSET; *reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE; *reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4); *bit = pin_num % RK3308_SCHMITT_PINS_PER_REG; return 0; } #define RK2928_PULL_OFFSET 0x118 #define RK2928_PULL_PINS_PER_REG 16 #define RK2928_PULL_BANK_STRIDE 8 static void rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK2928_PULL_OFFSET; *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE; *reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4; *bit = pin_num % RK2928_PULL_PINS_PER_REG; }; #define RK3128_PULL_OFFSET 0x118 static void rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3128_PULL_OFFSET; *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE; *reg += ((pin_num / RK2928_PULL_PINS_PER_REG) * 4); *bit = pin_num % RK2928_PULL_PINS_PER_REG; } #define RK3188_PULL_OFFSET 0x164 #define RK3188_PULL_BITS_PER_PIN 2 #define RK3188_PULL_PINS_PER_REG 8 #define RK3188_PULL_BANK_STRIDE 16 #define RK3188_PULL_PMU_OFFSET 0x64 static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 12 pins of the first bank are located elsewhere */ if (bank->bank_num == 0 && pin_num < 12) { *regmap = info->regmap_pmu ? info->regmap_pmu : bank->regmap_pull; *reg = info->regmap_pmu ? RK3188_PULL_PMU_OFFSET : 0; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = pin_num % RK3188_PULL_PINS_PER_REG; *bit *= RK3188_PULL_BITS_PER_PIN; } else { *regmap = info->regmap_pull ? info->regmap_pull : info->regmap_base; *reg = info->regmap_pull ? 0 : RK3188_PULL_OFFSET; /* correct the offset, as it is the 2nd pull register */ *reg -= 4; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); /* * The bits in these registers have an inverse ordering * with the lowest pin being in bits 15:14 and the highest * pin in bits 1:0 */ *bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } } #define RK3288_PULL_OFFSET 0x140 static void rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 24 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RK3188_PULL_PMU_OFFSET; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = pin_num % RK3188_PULL_PINS_PER_REG; *bit *= RK3188_PULL_BITS_PER_PIN; } else { *regmap = info->regmap_base; *reg = RK3288_PULL_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } } #define RK3288_DRV_PMU_OFFSET 0x70 #define RK3288_DRV_GRF_OFFSET 0x1c0 #define RK3288_DRV_BITS_PER_PIN 2 #define RK3288_DRV_PINS_PER_REG 8 #define RK3288_DRV_BANK_STRIDE 16 static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 24 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RK3288_DRV_PMU_OFFSET; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = pin_num % RK3288_DRV_PINS_PER_REG; *bit *= RK3288_DRV_BITS_PER_PIN; } else { *regmap = info->regmap_base; *reg = RK3288_DRV_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = (pin_num % RK3288_DRV_PINS_PER_REG); *bit *= RK3288_DRV_BITS_PER_PIN; } } #define RK3228_PULL_OFFSET 0x100 static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3228_PULL_OFFSET; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } #define RK3228_DRV_GRF_OFFSET 0x200 static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3228_DRV_GRF_OFFSET; *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = (pin_num % RK3288_DRV_PINS_PER_REG); *bit *= RK3288_DRV_BITS_PER_PIN; } #define RK3308_PULL_OFFSET 0xa0 static void rk3308_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3308_PULL_OFFSET; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } #define RK3308_DRV_GRF_OFFSET 0x100 static void rk3308_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3308_DRV_GRF_OFFSET; *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = (pin_num % RK3288_DRV_PINS_PER_REG); *bit *= RK3288_DRV_BITS_PER_PIN; } #define RK3368_PULL_GRF_OFFSET 0x100 #define RK3368_PULL_PMU_OFFSET 0x10 static void rk3368_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 32 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RK3368_PULL_PMU_OFFSET; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = pin_num % RK3188_PULL_PINS_PER_REG; *bit *= RK3188_PULL_BITS_PER_PIN; } else { *regmap = info->regmap_base; *reg = RK3368_PULL_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } } #define RK3368_DRV_PMU_OFFSET 0x20 #define RK3368_DRV_GRF_OFFSET 0x200 static void rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The first 32 pins of the first bank are located in PMU */ if (bank->bank_num == 0) { *regmap = info->regmap_pmu; *reg = RK3368_DRV_PMU_OFFSET; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = pin_num % RK3288_DRV_PINS_PER_REG; *bit *= RK3288_DRV_BITS_PER_PIN; } else { *regmap = info->regmap_base; *reg = RK3368_DRV_GRF_OFFSET; /* correct the offset, as we're starting with the 2nd bank */ *reg -= 0x10; *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); *bit = (pin_num % RK3288_DRV_PINS_PER_REG); *bit *= RK3288_DRV_BITS_PER_PIN; } } #define RK3399_PULL_GRF_OFFSET 0xe040 #define RK3399_PULL_PMU_OFFSET 0x40 #define RK3399_DRV_3BITS_PER_PIN 3 static void rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; /* The bank0:16 and bank1:32 pins are located in PMU */ if ((bank->bank_num == 0) || (bank->bank_num == 1)) { *regmap = info->regmap_pmu; *reg = RK3399_PULL_PMU_OFFSET; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = pin_num % RK3188_PULL_PINS_PER_REG; *bit *= RK3188_PULL_BITS_PER_PIN; } else { *regmap = info->regmap_base; *reg = RK3399_PULL_GRF_OFFSET; /* correct the offset, as we're starting with the 3rd bank */ *reg -= 0x20; *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); *bit = (pin_num % RK3188_PULL_PINS_PER_REG); *bit *= RK3188_PULL_BITS_PER_PIN; } } static void rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; int drv_num = (pin_num / 8); /* The bank0:16 and bank1:32 pins are located in PMU */ if ((bank->bank_num == 0) || (bank->bank_num == 1)) *regmap = info->regmap_pmu; else *regmap = info->regmap_base; *reg = bank->drv[drv_num].offset; if ((bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || (bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY)) *bit = (pin_num % 8) * 3; else *bit = (pin_num % 8) * 2; } static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { { 2, 4, 8, 12, -1, -1, -1, -1 }, { 3, 6, 9, 12, -1, -1, -1, -1 }, { 5, 10, 15, 20, -1, -1, -1, -1 }, { 4, 6, 8, 10, 12, 14, 16, 18 }, { 4, 7, 10, 13, 16, 19, 22, 26 } }; static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank, int pin_num) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret; u32 data, temp, rmask_bits; u8 bit; int drv_type = bank->drv[pin_num / 8].drv_type; ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); switch (drv_type) { case DRV_TYPE_IO_1V8_3V0_AUTO: case DRV_TYPE_IO_3V3_ONLY: rmask_bits = RK3399_DRV_3BITS_PER_PIN; switch (bit) { case 0 ... 12: /* regular case, nothing to do */ break; case 15: /* * drive-strength offset is special, as it is * spread over 2 registers */ ret = regmap_read(regmap, reg, &data); if (ret) return ret; ret = regmap_read(regmap, reg + 0x4, &temp); if (ret) return ret; /* * the bit data[15] contains bit 0 of the value * while temp[1:0] contains bits 2 and 1 */ data >>= 15; temp &= 0x3; temp <<= 1; data |= temp; return rockchip_perpin_drv_list[drv_type][data]; case 18 ... 21: /* setting fully enclosed in the second register */ reg += 4; bit -= 16; break; default: dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", bit, drv_type); return -EINVAL; } break; case DRV_TYPE_IO_DEFAULT: case DRV_TYPE_IO_1V8_OR_3V0: case DRV_TYPE_IO_1V8_ONLY: rmask_bits = RK3288_DRV_BITS_PER_PIN; break; default: dev_err(info->dev, "unsupported pinctrl drive type: %d\n", drv_type); return -EINVAL; } ret = regmap_read(regmap, reg, &data); if (ret) return ret; data >>= bit; data &= (1 << rmask_bits) - 1; return rockchip_perpin_drv_list[drv_type][data]; } static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, int pin_num, int strength) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret, i; u32 data, rmask, rmask_bits, temp; u8 bit; int drv_type = bank->drv[pin_num / 8].drv_type; dev_dbg(info->dev, "setting drive of GPIO%d-%d to %d\n", bank->bank_num, pin_num, strength); ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); ret = -EINVAL; for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) { if (rockchip_perpin_drv_list[drv_type][i] == strength) { ret = i; break; } else if (rockchip_perpin_drv_list[drv_type][i] < 0) { ret = rockchip_perpin_drv_list[drv_type][i]; break; } } if (ret < 0) { dev_err(info->dev, "unsupported driver strength %d\n", strength); return ret; } switch (drv_type) { case DRV_TYPE_IO_1V8_3V0_AUTO: case DRV_TYPE_IO_3V3_ONLY: rmask_bits = RK3399_DRV_3BITS_PER_PIN; switch (bit) { case 0 ... 12: /* regular case, nothing to do */ break; case 15: /* * drive-strength offset is special, as it is spread * over 2 registers, the bit data[15] contains bit 0 * of the value while temp[1:0] contains bits 2 and 1 */ data = (ret & 0x1) << 15; temp = (ret >> 0x1) & 0x3; rmask = BIT(15) | BIT(31); data |= BIT(31); ret = regmap_update_bits(regmap, reg, rmask, data); if (ret) return ret; rmask = 0x3 | (0x3 << 16); temp |= (0x3 << 16); reg += 0x4; ret = regmap_update_bits(regmap, reg, rmask, temp); return ret; case 18 ... 21: /* setting fully enclosed in the second register */ reg += 4; bit -= 16; break; default: dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", bit, drv_type); return -EINVAL; } break; case DRV_TYPE_IO_DEFAULT: case DRV_TYPE_IO_1V8_OR_3V0: case DRV_TYPE_IO_1V8_ONLY: rmask_bits = RK3288_DRV_BITS_PER_PIN; break; default: dev_err(info->dev, "unsupported pinctrl drive type: %d\n", drv_type); return -EINVAL; } /* enable the write to the equivalent lower bits */ data = ((1 << rmask_bits) - 1) << (bit + 16); rmask = data | (data >> 16); data |= (ret << bit); ret = regmap_update_bits(regmap, reg, rmask, data); return ret; } static int rockchip_pull_list[PULL_TYPE_MAX][4] = { { PIN_CONFIG_BIAS_DISABLE, PIN_CONFIG_BIAS_PULL_UP, PIN_CONFIG_BIAS_PULL_DOWN, PIN_CONFIG_BIAS_BUS_HOLD }, { PIN_CONFIG_BIAS_DISABLE, PIN_CONFIG_BIAS_PULL_DOWN, PIN_CONFIG_BIAS_DISABLE, PIN_CONFIG_BIAS_PULL_UP }, }; static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret, pull_type; u8 bit; u32 data; /* rk3066b does support any pulls */ if (ctrl->type == RK3066B) return PIN_CONFIG_BIAS_DISABLE; ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); ret = regmap_read(regmap, reg, &data); if (ret) return ret; switch (ctrl->type) { case RK2928: case RK3128: return !(data & BIT(bit)) ? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT : PIN_CONFIG_BIAS_DISABLE; case PX30: case RV1108: case RK3188: case RK3288: case RK3308: case RK3368: case RK3399: pull_type = bank->pull_type[pin_num / 8]; data >>= bit; data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1; return rockchip_pull_list[pull_type][data]; default: dev_err(info->dev, "unsupported pinctrl type\n"); return -EINVAL; }; } static int rockchip_set_pull(struct rockchip_pin_bank *bank, int pin_num, int pull) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret, i, pull_type; u8 bit; u32 data, rmask; dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n", bank->bank_num, pin_num, pull); /* rk3066b does support any pulls */ if (ctrl->type == RK3066B) return pull ? -EINVAL : 0; ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); switch (ctrl->type) { case RK2928: case RK3128: data = BIT(bit + 16); if (pull == PIN_CONFIG_BIAS_DISABLE) data |= BIT(bit); ret = regmap_write(regmap, reg, data); break; case PX30: case RV1108: case RK3188: case RK3288: case RK3308: case RK3368: case RK3399: pull_type = bank->pull_type[pin_num / 8]; ret = -EINVAL; for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]); i++) { if (rockchip_pull_list[pull_type][i] == pull) { ret = i; break; } } if (ret < 0) { dev_err(info->dev, "unsupported pull setting %d\n", pull); return ret; } /* enable the write to the equivalent lower bits */ data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16); rmask = data | (data >> 16); data |= (ret << bit); ret = regmap_update_bits(regmap, reg, rmask, data); break; default: dev_err(info->dev, "unsupported pinctrl type\n"); return -EINVAL; } return ret; } #define RK3328_SCHMITT_BITS_PER_PIN 1 #define RK3328_SCHMITT_PINS_PER_REG 16 #define RK3328_SCHMITT_BANK_STRIDE 8 #define RK3328_SCHMITT_GRF_OFFSET 0x380 static int rk3328_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit) { struct rockchip_pinctrl *info = bank->drvdata; *regmap = info->regmap_base; *reg = RK3328_SCHMITT_GRF_OFFSET; *reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE; *reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4); *bit = pin_num % RK3328_SCHMITT_PINS_PER_REG; return 0; } static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret; u8 bit; u32 data; ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); if (ret) return ret; ret = regmap_read(regmap, reg, &data); if (ret) return ret; data >>= bit; return data & 0x1; } static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, int pin_num, int enable) { struct rockchip_pinctrl *info = bank->drvdata; struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret; u8 bit; u32 data, rmask; dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n", bank->bank_num, pin_num, enable); ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); if (ret) return ret; /* enable the write to the equivalent lower bits */ data = BIT(bit + 16) | (enable << bit); rmask = BIT(bit + 16) | BIT(bit); return regmap_update_bits(regmap, reg, rmask, data); } /* * Pinmux_ops handling */ static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); return info->nfunctions; } static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev, unsigned selector) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); return info->functions[selector].name; } static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, const char * const **groups, unsigned * const num_groups) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); *groups = info->functions[selector].groups; *num_groups = info->functions[selector].ngroups; return 0; } static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, unsigned group) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); const unsigned int *pins = info->groups[group].pins; const struct rockchip_pin_config *data = info->groups[group].data; struct rockchip_pin_bank *bank; int cnt, ret = 0; dev_dbg(info->dev, "enable function %s group %s\n", info->functions[selector].name, info->groups[group].name); /* * for each pin in the pin group selected, program the corresponding * pin function number in the config register. */ for (cnt = 0; cnt < info->groups[group].npins; cnt++) { bank = pin_to_bank(info, pins[cnt]); ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base, data[cnt].func); if (ret) break; } if (ret) { /* revert the already done pin settings */ for (cnt--; cnt >= 0; cnt--) rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0); return ret; } return 0; } static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset) { struct rockchip_pin_bank *bank = gpiochip_get_data(chip); u32 data; int ret; ret = clk_enable(bank->clk); if (ret < 0) { dev_err(bank->drvdata->dev, "failed to enable clock for bank %s\n", bank->name); return ret; } data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); clk_disable(bank->clk); if (data & BIT(offset)) return GPIO_LINE_DIRECTION_OUT; return GPIO_LINE_DIRECTION_IN; } /* * The calls to gpio_direction_output() and gpio_direction_input() * leads to this function call (via the pinctrl_gpio_direction_{input|output}() * function called from the gpiolib interface). */ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip, int pin, bool input) { struct rockchip_pin_bank *bank; int ret; unsigned long flags; u32 data; bank = gpiochip_get_data(chip); ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO); if (ret < 0) return ret; clk_enable(bank->clk); raw_spin_lock_irqsave(&bank->slock, flags); data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); /* set bit to 1 for output, 0 for input */ if (!input) data |= BIT(pin); else data &= ~BIT(pin); writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); raw_spin_unlock_irqrestore(&bank->slock, flags); clk_disable(bank->clk); return 0; } static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset, bool input) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); struct gpio_chip *chip; int pin; chip = range->gc; pin = offset - chip->base; dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n", offset, range->name, pin, input ? "input" : "output"); return _rockchip_pmx_gpio_set_direction(chip, offset - chip->base, input); } static const struct pinmux_ops rockchip_pmx_ops = { .get_functions_count = rockchip_pmx_get_funcs_count, .get_function_name = rockchip_pmx_get_func_name, .get_function_groups = rockchip_pmx_get_groups, .set_mux = rockchip_pmx_set, .gpio_set_direction = rockchip_pmx_gpio_set_direction, }; /* * Pinconf_ops handling */ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, enum pin_config_param pull) { switch (ctrl->type) { case RK2928: case RK3128: return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT || pull == PIN_CONFIG_BIAS_DISABLE); case RK3066B: return pull ? false : true; case PX30: case RV1108: case RK3188: case RK3288: case RK3308: case RK3368: case RK3399: return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT); } return false; } static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value); static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset); /* set the pin config settings for a specified pin */ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *configs, unsigned num_configs) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); struct rockchip_pin_bank *bank = pin_to_bank(info, pin); enum pin_config_param param; u32 arg; int i; int rc; for (i = 0; i < num_configs; i++) { param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); switch (param) { case PIN_CONFIG_BIAS_DISABLE: rc = rockchip_set_pull(bank, pin - bank->pin_base, param); if (rc) return rc; break; case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_BUS_HOLD: if (!rockchip_pinconf_pull_valid(info->ctrl, param)) return -ENOTSUPP; if (!arg) return -EINVAL; rc = rockchip_set_pull(bank, pin - bank->pin_base, param); if (rc) return rc; break; case PIN_CONFIG_OUTPUT: rockchip_gpio_set(&bank->gpio_chip, pin - bank->pin_base, arg); rc = _rockchip_pmx_gpio_set_direction(&bank->gpio_chip, pin - bank->pin_base, false); if (rc) return rc; break; case PIN_CONFIG_DRIVE_STRENGTH: /* rk3288 is the first with per-pin drive-strength */ if (!info->ctrl->drv_calc_reg) return -ENOTSUPP; rc = rockchip_set_drive_perpin(bank, pin - bank->pin_base, arg); if (rc < 0) return rc; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (!info->ctrl->schmitt_calc_reg) return -ENOTSUPP; rc = rockchip_set_schmitt(bank, pin - bank->pin_base, arg); if (rc < 0) return rc; break; default: return -ENOTSUPP; break; } } /* for each config */ return 0; } /* get the pin config settings for a specified pin */ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *config) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); struct rockchip_pin_bank *bank = pin_to_bank(info, pin); enum pin_config_param param = pinconf_to_config_param(*config); u16 arg; int rc; switch (param) { case PIN_CONFIG_BIAS_DISABLE: if (rockchip_get_pull(bank, pin - bank->pin_base) != param) return -EINVAL; arg = 0; break; case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_BUS_HOLD: if (!rockchip_pinconf_pull_valid(info->ctrl, param)) return -ENOTSUPP; if (rockchip_get_pull(bank, pin - bank->pin_base) != param) return -EINVAL; arg = 1; break; case PIN_CONFIG_OUTPUT: rc = rockchip_get_mux(bank, pin - bank->pin_base); if (rc != RK_FUNC_GPIO) return -EINVAL; rc = rockchip_gpio_get(&bank->gpio_chip, pin - bank->pin_base); if (rc < 0) return rc; arg = rc ? 1 : 0; break; case PIN_CONFIG_DRIVE_STRENGTH: /* rk3288 is the first with per-pin drive-strength */ if (!info->ctrl->drv_calc_reg) return -ENOTSUPP; rc = rockchip_get_drive_perpin(bank, pin - bank->pin_base); if (rc < 0) return rc; arg = rc; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (!info->ctrl->schmitt_calc_reg) return -ENOTSUPP; rc = rockchip_get_schmitt(bank, pin - bank->pin_base); if (rc < 0) return rc; arg = rc; break; default: return -ENOTSUPP; break; } *config = pinconf_to_config_packed(param, arg); return 0; } static const struct pinconf_ops rockchip_pinconf_ops = { .pin_config_get = rockchip_pinconf_get, .pin_config_set = rockchip_pinconf_set, .is_generic = true, }; static const struct of_device_id rockchip_bank_match[] = { { .compatible = "rockchip,gpio-bank" }, { .compatible = "rockchip,rk3188-gpio-bank0" }, {}, }; static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info, struct device_node *np) { struct device_node *child; for_each_child_of_node(np, child) { if (of_match_node(rockchip_bank_match, child)) continue; info->nfunctions++; info->ngroups += of_get_child_count(child); } } static int rockchip_pinctrl_parse_groups(struct device_node *np, struct rockchip_pin_group *grp, struct rockchip_pinctrl *info, u32 index) { struct rockchip_pin_bank *bank; int size; const __be32 *list; int num; int i, j; int ret; dev_dbg(info->dev, "group(%d): %pOFn\n", index, np); /* Initialise group */ grp->name = np->name; /* * the binding format is rockchip,pins = <bank pin mux CONFIG>, * do sanity check and calculate pins number */ list = of_get_property(np, "rockchip,pins", &size); /* we do not check return since it's safe node passed down */ size /= sizeof(*list); if (!size || size % 4) { dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n"); return -EINVAL; } grp->npins = size / 4; grp->pins = devm_kcalloc(info->dev, grp->npins, sizeof(unsigned int), GFP_KERNEL); grp->data = devm_kcalloc(info->dev, grp->npins, sizeof(struct rockchip_pin_config), GFP_KERNEL); if (!grp->pins || !grp->data) return -ENOMEM; for (i = 0, j = 0; i < size; i += 4, j++) { const __be32 *phandle; struct device_node *np_config; num = be32_to_cpu(*list++); bank = bank_num_to_bank(info, num); if (IS_ERR(bank)) return PTR_ERR(bank); grp->pins[j] = bank->pin_base + be32_to_cpu(*list++); grp->data[j].func = be32_to_cpu(*list++); phandle = list++; if (!phandle) return -EINVAL; np_config = of_find_node_by_phandle(be32_to_cpup(phandle)); ret = pinconf_generic_parse_dt_config(np_config, NULL, &grp->data[j].configs, &grp->data[j].nconfigs); if (ret) return ret; } return 0; } static int rockchip_pinctrl_parse_functions(struct device_node *np, struct rockchip_pinctrl *info, u32 index) { struct device_node *child; struct rockchip_pmx_func *func; struct rockchip_pin_group *grp; int ret; static u32 grp_index; u32 i = 0; dev_dbg(info->dev, "parse function(%d): %pOFn\n", index, np); func = &info->functions[index]; /* Initialise function */ func->name = np->name; func->ngroups = of_get_child_count(np); if (func->ngroups <= 0) return 0; func->groups = devm_kcalloc(info->dev, func->ngroups, sizeof(char *), GFP_KERNEL); if (!func->groups) return -ENOMEM; for_each_child_of_node(np, child) { func->groups[i] = child->name; grp = &info->groups[grp_index++]; ret = rockchip_pinctrl_parse_groups(child, grp, info, i++); if (ret) { of_node_put(child); return ret; } } return 0; } static int rockchip_pinctrl_parse_dt(struct platform_device *pdev, struct rockchip_pinctrl *info) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct device_node *child; int ret; int i; rockchip_pinctrl_child_count(info, np); dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(struct rockchip_pmx_func), GFP_KERNEL); if (!info->functions) return -EINVAL; info->groups = devm_kcalloc(dev, info->ngroups, sizeof(struct rockchip_pin_group), GFP_KERNEL); if (!info->groups) return -EINVAL; i = 0; for_each_child_of_node(np, child) { if (of_match_node(rockchip_bank_match, child)) continue; ret = rockchip_pinctrl_parse_functions(child, info, i++); if (ret) { dev_err(&pdev->dev, "failed to parse function\n"); of_node_put(child); return ret; } } return 0; } static int rockchip_pinctrl_register(struct platform_device *pdev, struct rockchip_pinctrl *info) { struct pinctrl_desc *ctrldesc = &info->pctl; struct pinctrl_pin_desc *pindesc, *pdesc; struct rockchip_pin_bank *pin_bank; int pin, bank, ret; int k; ctrldesc->name = "rockchip-pinctrl"; ctrldesc->owner = THIS_MODULE; ctrldesc->pctlops = &rockchip_pctrl_ops; ctrldesc->pmxops = &rockchip_pmx_ops; ctrldesc->confops = &rockchip_pinconf_ops; pindesc = devm_kcalloc(&pdev->dev, info->ctrl->nr_pins, sizeof(*pindesc), GFP_KERNEL); if (!pindesc) return -ENOMEM; ctrldesc->pins = pindesc; ctrldesc->npins = info->ctrl->nr_pins; pdesc = pindesc; for (bank = 0 , k = 0; bank < info->ctrl->nr_banks; bank++) { pin_bank = &info->ctrl->pin_banks[bank]; for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) { pdesc->number = k; pdesc->name = kasprintf(GFP_KERNEL, "%s-%d", pin_bank->name, pin); pdesc++; } } ret = rockchip_pinctrl_parse_dt(pdev, info); if (ret) return ret; info->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, info); if (IS_ERR(info->pctl_dev)) { dev_err(&pdev->dev, "could not register pinctrl driver\n"); return PTR_ERR(info->pctl_dev); } for (bank = 0; bank < info->ctrl->nr_banks; ++bank) { pin_bank = &info->ctrl->pin_banks[bank]; pin_bank->grange.name = pin_bank->name; pin_bank->grange.id = bank; pin_bank->grange.pin_base = pin_bank->pin_base; pin_bank->grange.base = pin_bank->gpio_chip.base; pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; pin_bank->grange.gc = &pin_bank->gpio_chip; pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange); } return 0; } /* * GPIO handling */ static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { struct rockchip_pin_bank *bank = gpiochip_get_data(gc); void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR; unsigned long flags; u32 data; clk_enable(bank->clk); raw_spin_lock_irqsave(&bank->slock, flags); data = readl(reg); data &= ~BIT(offset); if (value) data |= BIT(offset); writel(data, reg); raw_spin_unlock_irqrestore(&bank->slock, flags); clk_disable(bank->clk); } /* * Returns the level of the pin for input direction and setting of the DR * register for output gpios. */ static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset) { struct rockchip_pin_bank *bank = gpiochip_get_data(gc); u32 data; clk_enable(bank->clk); data = readl(bank->reg_base + GPIO_EXT_PORT); clk_disable(bank->clk); data >>= offset; data &= 1; return data; } /* * gpiolib gpio_direction_input callback function. The setting of the pin * mux function as 'gpio input' will be handled by the pinctrl subsystem * interface. */ static int rockchip_gpio_direction_input(struct gpio_chip *gc, unsigned offset) { return pinctrl_gpio_direction_input(gc->base + offset); } /* * gpiolib gpio_direction_output callback function. The setting of the pin * mux function as 'gpio output' will be handled by the pinctrl subsystem * interface. */ static int rockchip_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int value) { rockchip_gpio_set(gc, offset, value); return pinctrl_gpio_direction_output(gc->base + offset); } static void rockchip_gpio_set_debounce(struct gpio_chip *gc, unsigned int offset, bool enable) { struct rockchip_pin_bank *bank = gpiochip_get_data(gc); void __iomem *reg = bank->reg_base + GPIO_DEBOUNCE; unsigned long flags; u32 data; clk_enable(bank->clk); raw_spin_lock_irqsave(&bank->slock, flags); data = readl(reg); if (enable) data |= BIT(offset); else data &= ~BIT(offset); writel(data, reg); raw_spin_unlock_irqrestore(&bank->slock, flags); clk_disable(bank->clk); } /* * gpiolib set_config callback function. The setting of the pin * mux function as 'gpio output' will be handled by the pinctrl subsystem * interface. */ static int rockchip_gpio_set_config(struct gpio_chip *gc, unsigned int offset, unsigned long config) { enum pin_config_param param = pinconf_to_config_param(config); switch (param) { case PIN_CONFIG_INPUT_DEBOUNCE: rockchip_gpio_set_debounce(gc, offset, true); /* * Rockchip's gpio could only support up to one period * of the debounce clock(pclk), which is far away from * satisftying the requirement, as pclk is usually near * 100MHz shared by all peripherals. So the fact is it * has crippled debounce capability could only be useful * to prevent any spurious glitches from waking up the system * if the gpio is conguired as wakeup interrupt source. Let's * still return -ENOTSUPP as before, to make sure the caller * of gpiod_set_debounce won't change its behaviour. */ return -ENOTSUPP; default: return -ENOTSUPP; } } /* * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin * and a virtual IRQ, if not already present. */ static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned offset) { struct rockchip_pin_bank *bank = gpiochip_get_data(gc); unsigned int virq; if (!bank->domain) return -ENXIO; virq = irq_create_mapping(bank->domain, offset); return (virq) ? : -ENXIO; } static const struct gpio_chip rockchip_gpiolib_chip = { .request = gpiochip_generic_request, .free = gpiochip_generic_free, .set = rockchip_gpio_set, .get = rockchip_gpio_get, .get_direction = rockchip_gpio_get_direction, .direction_input = rockchip_gpio_direction_input, .direction_output = rockchip_gpio_direction_output, .set_config = rockchip_gpio_set_config, .to_irq = rockchip_gpio_to_irq, .owner = THIS_MODULE, }; /* * Interrupt handling */ static void rockchip_irq_demux(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); struct rockchip_pin_bank *bank = irq_desc_get_handler_data(desc); u32 pend; dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name); chained_irq_enter(chip, desc); pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS); while (pend) { unsigned int irq, virq; irq = __ffs(pend); pend &= ~BIT(irq); virq = irq_linear_revmap(bank->domain, irq); if (!virq) { dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq); continue; } dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq); /* * Triggering IRQ on both rising and falling edge * needs manual intervention. */ if (bank->toggle_edge_mode & BIT(irq)) { u32 data, data_old, polarity; unsigned long flags; data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT); do { raw_spin_lock_irqsave(&bank->slock, flags); polarity = readl_relaxed(bank->reg_base + GPIO_INT_POLARITY); if (data & BIT(irq)) polarity &= ~BIT(irq); else polarity |= BIT(irq); writel(polarity, bank->reg_base + GPIO_INT_POLARITY); raw_spin_unlock_irqrestore(&bank->slock, flags); data_old = data; data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT); } while ((data & BIT(irq)) != (data_old & BIT(irq))); } generic_handle_irq(virq); } chained_irq_exit(chip, desc); } static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct rockchip_pin_bank *bank = gc->private; u32 mask = BIT(d->hwirq); u32 polarity; u32 level; u32 data; unsigned long flags; int ret; /* make sure the pin is configured as gpio input */ ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO); if (ret < 0) return ret; clk_enable(bank->clk); raw_spin_lock_irqsave(&bank->slock, flags); data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); data &= ~mask; writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); raw_spin_unlock_irqrestore(&bank->slock, flags); if (type & IRQ_TYPE_EDGE_BOTH) irq_set_handler_locked(d, handle_edge_irq); else irq_set_handler_locked(d, handle_level_irq); raw_spin_lock_irqsave(&bank->slock, flags); irq_gc_lock(gc); level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL); polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY); switch (type) { case IRQ_TYPE_EDGE_BOTH: bank->toggle_edge_mode |= mask; level |= mask; /* * Determine gpio state. If 1 next interrupt should be falling * otherwise rising. */ data = readl(bank->reg_base + GPIO_EXT_PORT); if (data & mask) polarity &= ~mask; else polarity |= mask; break; case IRQ_TYPE_EDGE_RISING: bank->toggle_edge_mode &= ~mask; level |= mask; polarity |= mask; break; case IRQ_TYPE_EDGE_FALLING: bank->toggle_edge_mode &= ~mask; level |= mask; polarity &= ~mask; break; case IRQ_TYPE_LEVEL_HIGH: bank->toggle_edge_mode &= ~mask; level &= ~mask; polarity |= mask; break; case IRQ_TYPE_LEVEL_LOW: bank->toggle_edge_mode &= ~mask; level &= ~mask; polarity &= ~mask; break; default: irq_gc_unlock(gc); raw_spin_unlock_irqrestore(&bank->slock, flags); clk_disable(bank->clk); return -EINVAL; } writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL); writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY); irq_gc_unlock(gc); raw_spin_unlock_irqrestore(&bank->slock, flags); clk_disable(bank->clk); return 0; } static void rockchip_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct rockchip_pin_bank *bank = gc->private; clk_enable(bank->clk); bank->saved_masks = irq_reg_readl(gc, GPIO_INTMASK); irq_reg_writel(gc, ~gc->wake_active, GPIO_INTMASK); clk_disable(bank->clk); } static void rockchip_irq_resume(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct rockchip_pin_bank *bank = gc->private; clk_enable(bank->clk); irq_reg_writel(gc, bank->saved_masks, GPIO_INTMASK); clk_disable(bank->clk); } static void rockchip_irq_enable(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct rockchip_pin_bank *bank = gc->private; clk_enable(bank->clk); irq_gc_mask_clr_bit(d); } static void rockchip_irq_disable(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct rockchip_pin_bank *bank = gc->private; irq_gc_mask_set_bit(d); clk_disable(bank->clk); } static int rockchip_interrupts_register(struct platform_device *pdev, struct rockchip_pinctrl *info) { struct rockchip_pin_ctrl *ctrl = info->ctrl; struct rockchip_pin_bank *bank = ctrl->pin_banks; unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; struct irq_chip_generic *gc; int ret; int i, j; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { if (!bank->valid) { dev_warn(&pdev->dev, "bank %s is not valid\n", bank->name); continue; } ret = clk_enable(bank->clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock for bank %s\n", bank->name); continue; } bank->domain = irq_domain_add_linear(bank->of_node, 32, &irq_generic_chip_ops, NULL); if (!bank->domain) { dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n", bank->name); clk_disable(bank->clk); continue; } ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1, "rockchip_gpio_irq", handle_level_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE); if (ret) { dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n", bank->name); irq_domain_remove(bank->domain); clk_disable(bank->clk); continue; } /* * Linux assumes that all interrupts start out disabled/masked. * Our driver only uses the concept of masked and always keeps * things enabled, so for us that's all masked and all enabled. */ writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTMASK); writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTEN); gc = irq_get_domain_generic_chip(bank->domain, 0); gc->reg_base = bank->reg_base; gc->private = bank; gc->chip_types[0].regs.mask = GPIO_INTMASK; gc->chip_types[0].regs.ack = GPIO_PORTS_EOI; gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit; gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; gc->wake_enabled = IRQ_MSK(bank->nr_pins); irq_set_chained_handler_and_data(bank->irq, rockchip_irq_demux, bank); /* map the gpio irqs here, when the clock is still running */ for (j = 0 ; j < 32 ; j++) irq_create_mapping(bank->domain, j); clk_disable(bank->clk); } return 0; } static int rockchip_gpiolib_register(struct platform_device *pdev, struct rockchip_pinctrl *info) { struct rockchip_pin_ctrl *ctrl = info->ctrl; struct rockchip_pin_bank *bank = ctrl->pin_banks; struct gpio_chip *gc; int ret; int i; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { if (!bank->valid) { dev_warn(&pdev->dev, "bank %s is not valid\n", bank->name); continue; } bank->gpio_chip = rockchip_gpiolib_chip; gc = &bank->gpio_chip; gc->base = bank->pin_base; gc->ngpio = bank->nr_pins; gc->parent = &pdev->dev; gc->of_node = bank->of_node; gc->label = bank->name; ret = gpiochip_add_data(gc, bank); if (ret) { dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", gc->label, ret); goto fail; } } rockchip_interrupts_register(pdev, info); return 0; fail: for (--i, --bank; i >= 0; --i, --bank) { if (!bank->valid) continue; gpiochip_remove(&bank->gpio_chip); } return ret; } static int rockchip_gpiolib_unregister(struct platform_device *pdev, struct rockchip_pinctrl *info) { struct rockchip_pin_ctrl *ctrl = info->ctrl; struct rockchip_pin_bank *bank = ctrl->pin_banks; int i; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { if (!bank->valid) continue; gpiochip_remove(&bank->gpio_chip); } return 0; } static int rockchip_get_bank_data(struct rockchip_pin_bank *bank, struct rockchip_pinctrl *info) { struct resource res; void __iomem *base; if (of_address_to_resource(bank->of_node, 0, &res)) { dev_err(info->dev, "cannot find IO resource for bank\n"); return -ENOENT; } bank->reg_base = devm_ioremap_resource(info->dev, &res); if (IS_ERR(bank->reg_base)) return PTR_ERR(bank->reg_base); /* * special case, where parts of the pull setting-registers are * part of the PMU register space */ if (of_device_is_compatible(bank->of_node, "rockchip,rk3188-gpio-bank0")) { struct device_node *node; node = of_parse_phandle(bank->of_node->parent, "rockchip,pmu", 0); if (!node) { if (of_address_to_resource(bank->of_node, 1, &res)) { dev_err(info->dev, "cannot find IO resource for bank\n"); return -ENOENT; } base = devm_ioremap_resource(info->dev, &res); if (IS_ERR(base)) return PTR_ERR(base); rockchip_regmap_config.max_register = resource_size(&res) - 4; rockchip_regmap_config.name = "rockchip,rk3188-gpio-bank0-pull"; bank->regmap_pull = devm_regmap_init_mmio(info->dev, base, &rockchip_regmap_config); } of_node_put(node); } bank->irq = irq_of_parse_and_map(bank->of_node, 0); bank->clk = of_clk_get(bank->of_node, 0); if (IS_ERR(bank->clk)) return PTR_ERR(bank->clk); return clk_prepare(bank->clk); } static const struct of_device_id rockchip_pinctrl_dt_match[]; /* retrieve the soc specific data */ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( struct rockchip_pinctrl *d, struct platform_device *pdev) { const struct of_device_id *match; struct device_node *node = pdev->dev.of_node; struct device_node *np; struct rockchip_pin_ctrl *ctrl; struct rockchip_pin_bank *bank; int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; match = of_match_node(rockchip_pinctrl_dt_match, node); ctrl = (struct rockchip_pin_ctrl *)match->data; for_each_child_of_node(node, np) { if (!of_find_property(np, "gpio-controller", NULL)) continue; bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { if (!strcmp(bank->name, np->name)) { bank->of_node = np; if (!rockchip_get_bank_data(bank, d)) bank->valid = true; break; } } } grf_offs = ctrl->grf_mux_offset; pmu_offs = ctrl->pmu_mux_offset; drv_pmu_offs = ctrl->pmu_drv_offset; drv_grf_offs = ctrl->grf_drv_offset; bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { int bank_pins = 0; raw_spin_lock_init(&bank->slock); bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; /* calculate iomux and drv offsets */ for (j = 0; j < 4; j++) { struct rockchip_iomux *iom = &bank->iomux[j]; struct rockchip_drv *drv = &bank->drv[j]; int inc; if (bank_pins >= bank->nr_pins) break; /* preset iomux offset value, set new start value */ if (iom->offset >= 0) { if (iom->type & IOMUX_SOURCE_PMU) pmu_offs = iom->offset; else grf_offs = iom->offset; } else { /* set current iomux offset */ iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? pmu_offs : grf_offs; } /* preset drv offset value, set new start value */ if (drv->offset >= 0) { if (iom->type & IOMUX_SOURCE_PMU) drv_pmu_offs = drv->offset; else drv_grf_offs = drv->offset; } else { /* set current drv offset */ drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? drv_pmu_offs : drv_grf_offs; } dev_dbg(d->dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", i, j, iom->offset, drv->offset); /* * Increase offset according to iomux width. * 4bit iomux'es are spread over two registers. */ inc = (iom->type & (IOMUX_WIDTH_4BIT | IOMUX_WIDTH_3BIT | IOMUX_WIDTH_2BIT)) ? 8 : 4; if (iom->type & IOMUX_SOURCE_PMU) pmu_offs += inc; else grf_offs += inc; /* * Increase offset according to drv width. * 3bit drive-strenth'es are spread over two registers. */ if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || (drv->drv_type == DRV_TYPE_IO_3V3_ONLY)) inc = 8; else inc = 4; if (iom->type & IOMUX_SOURCE_PMU) drv_pmu_offs += inc; else drv_grf_offs += inc; bank_pins += 8; } /* calculate the per-bank recalced_mask */ for (j = 0; j < ctrl->niomux_recalced; j++) { int pin = 0; if (ctrl->iomux_recalced[j].num == bank->bank_num) { pin = ctrl->iomux_recalced[j].pin; bank->recalced_mask |= BIT(pin); } } /* calculate the per-bank route_mask */ for (j = 0; j < ctrl->niomux_routes; j++) { int pin = 0; if (ctrl->iomux_routes[j].bank_num == bank->bank_num) { pin = ctrl->iomux_routes[j].pin; bank->route_mask |= BIT(pin); } } } return ctrl; } #define RK3288_GRF_GPIO6C_IOMUX 0x64 #define GPIO6C6_SEL_WRITE_ENABLE BIT(28) static u32 rk3288_grf_gpio6c_iomux; static int __maybe_unused rockchip_pinctrl_suspend(struct device *dev) { struct rockchip_pinctrl *info = dev_get_drvdata(dev); int ret = pinctrl_force_sleep(info->pctl_dev); if (ret) return ret; /* * RK3288 GPIO6_C6 mux would be modified by Maskrom when resume, so save * the setting here, and restore it at resume. */ if (info->ctrl->type == RK3288) { ret = regmap_read(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, &rk3288_grf_gpio6c_iomux); if (ret) { pinctrl_force_default(info->pctl_dev); return ret; } } return 0; } static int __maybe_unused rockchip_pinctrl_resume(struct device *dev) { struct rockchip_pinctrl *info = dev_get_drvdata(dev); int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, rk3288_grf_gpio6c_iomux | GPIO6C6_SEL_WRITE_ENABLE); if (ret) return ret; return pinctrl_force_default(info->pctl_dev); } static SIMPLE_DEV_PM_OPS(rockchip_pinctrl_dev_pm_ops, rockchip_pinctrl_suspend, rockchip_pinctrl_resume); static int rockchip_pinctrl_probe(struct platform_device *pdev) { struct rockchip_pinctrl *info; struct device *dev = &pdev->dev; struct rockchip_pin_ctrl *ctrl; struct device_node *np = pdev->dev.of_node, *node; struct resource *res; void __iomem *base; int ret; if (!dev->of_node) { dev_err(dev, "device tree node not found\n"); return -ENODEV; } info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; info->dev = dev; ctrl = rockchip_pinctrl_get_soc_data(info, pdev); if (!ctrl) { dev_err(dev, "driver data not available\n"); return -EINVAL; } info->ctrl = ctrl; node = of_parse_phandle(np, "rockchip,grf", 0); if (node) { info->regmap_base = syscon_node_to_regmap(node); if (IS_ERR(info->regmap_base)) return PTR_ERR(info->regmap_base); } else { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); rockchip_regmap_config.max_register = resource_size(res) - 4; rockchip_regmap_config.name = "rockchip,pinctrl"; info->regmap_base = devm_regmap_init_mmio(&pdev->dev, base, &rockchip_regmap_config); /* to check for the old dt-bindings */ info->reg_size = resource_size(res); /* Honor the old binding, with pull registers as 2nd resource */ if (ctrl->type == RK3188 && info->reg_size < 0x200) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); rockchip_regmap_config.max_register = resource_size(res) - 4; rockchip_regmap_config.name = "rockchip,pinctrl-pull"; info->regmap_pull = devm_regmap_init_mmio(&pdev->dev, base, &rockchip_regmap_config); } } /* try to find the optional reference to the pmu syscon */ node = of_parse_phandle(np, "rockchip,pmu", 0); if (node) { info->regmap_pmu = syscon_node_to_regmap(node); if (IS_ERR(info->regmap_pmu)) return PTR_ERR(info->regmap_pmu); } ret = rockchip_gpiolib_register(pdev, info); if (ret) return ret; ret = rockchip_pinctrl_register(pdev, info); if (ret) { rockchip_gpiolib_unregister(pdev, info); return ret; } platform_set_drvdata(pdev, info); return 0; } static struct rockchip_pin_bank px30_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU ), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT ), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT ), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT ), }; static struct rockchip_pin_ctrl px30_pin_ctrl = { .pin_banks = px30_pin_banks, .nr_banks = ARRAY_SIZE(px30_pin_banks), .label = "PX30-GPIO", .type = PX30, .grf_mux_offset = 0x0, .pmu_mux_offset = 0x0, .iomux_routes = px30_mux_route_data, .niomux_routes = ARRAY_SIZE(px30_mux_route_data), .pull_calc_reg = px30_calc_pull_reg_and_bit, .drv_calc_reg = px30_calc_drv_reg_and_bit, .schmitt_calc_reg = px30_calc_schmitt_reg_and_bit, }; static struct rockchip_pin_bank rv1108_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0), }; static struct rockchip_pin_ctrl rv1108_pin_ctrl = { .pin_banks = rv1108_pin_banks, .nr_banks = ARRAY_SIZE(rv1108_pin_banks), .label = "RV1108-GPIO", .type = RV1108, .grf_mux_offset = 0x10, .pmu_mux_offset = 0x0, .iomux_recalced = rv1108_mux_recalced_data, .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data), .pull_calc_reg = rv1108_calc_pull_reg_and_bit, .drv_calc_reg = rv1108_calc_drv_reg_and_bit, .schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit, }; static struct rockchip_pin_bank rk2928_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk2928_pin_ctrl = { .pin_banks = rk2928_pin_banks, .nr_banks = ARRAY_SIZE(rk2928_pin_banks), .label = "RK2928-GPIO", .type = RK2928, .grf_mux_offset = 0xa8, .pull_calc_reg = rk2928_calc_pull_reg_and_bit, }; static struct rockchip_pin_bank rk3036_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), }; static struct rockchip_pin_ctrl rk3036_pin_ctrl = { .pin_banks = rk3036_pin_banks, .nr_banks = ARRAY_SIZE(rk3036_pin_banks), .label = "RK3036-GPIO", .type = RK2928, .grf_mux_offset = 0xa8, .pull_calc_reg = rk2928_calc_pull_reg_and_bit, }; static struct rockchip_pin_bank rk3066a_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), PIN_BANK(4, 32, "gpio4"), PIN_BANK(6, 16, "gpio6"), }; static struct rockchip_pin_ctrl rk3066a_pin_ctrl = { .pin_banks = rk3066a_pin_banks, .nr_banks = ARRAY_SIZE(rk3066a_pin_banks), .label = "RK3066a-GPIO", .type = RK2928, .grf_mux_offset = 0xa8, .pull_calc_reg = rk2928_calc_pull_reg_and_bit, }; static struct rockchip_pin_bank rk3066b_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk3066b_pin_ctrl = { .pin_banks = rk3066b_pin_banks, .nr_banks = ARRAY_SIZE(rk3066b_pin_banks), .label = "RK3066b-GPIO", .type = RK3066B, .grf_mux_offset = 0x60, }; static struct rockchip_pin_bank rk3128_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk3128_pin_ctrl = { .pin_banks = rk3128_pin_banks, .nr_banks = ARRAY_SIZE(rk3128_pin_banks), .label = "RK3128-GPIO", .type = RK3128, .grf_mux_offset = 0xa8, .iomux_recalced = rk3128_mux_recalced_data, .niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data), .iomux_routes = rk3128_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3128_mux_route_data), .pull_calc_reg = rk3128_calc_pull_reg_and_bit, }; static struct rockchip_pin_bank rk3188_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk3188_pin_ctrl = { .pin_banks = rk3188_pin_banks, .nr_banks = ARRAY_SIZE(rk3188_pin_banks), .label = "RK3188-GPIO", .type = RK3188, .grf_mux_offset = 0x60, .iomux_routes = rk3188_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3188_mux_route_data), .pull_calc_reg = rk3188_calc_pull_reg_and_bit, }; static struct rockchip_pin_bank rk3228_pin_banks[] = { PIN_BANK(0, 32, "gpio0"), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk3228_pin_ctrl = { .pin_banks = rk3228_pin_banks, .nr_banks = ARRAY_SIZE(rk3228_pin_banks), .label = "RK3228-GPIO", .type = RK3288, .grf_mux_offset = 0x0, .iomux_routes = rk3228_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3228_mux_route_data), .pull_calc_reg = rk3228_calc_pull_reg_and_bit, .drv_calc_reg = rk3228_calc_drv_reg_and_bit, }; static struct rockchip_pin_bank rk3288_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_UNROUTED ), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED, IOMUX_UNROUTED, IOMUX_UNROUTED, 0 ), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT), PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT, IOMUX_WIDTH_4BIT, 0, 0 ), PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED, 0, 0, IOMUX_UNROUTED ), PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED), PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0, 0, IOMUX_WIDTH_4BIT, IOMUX_UNROUTED ), PIN_BANK(8, 16, "gpio8"), }; static struct rockchip_pin_ctrl rk3288_pin_ctrl = { .pin_banks = rk3288_pin_banks, .nr_banks = ARRAY_SIZE(rk3288_pin_banks), .label = "RK3288-GPIO", .type = RK3288, .grf_mux_offset = 0x0, .pmu_mux_offset = 0x84, .iomux_routes = rk3288_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data), .pull_calc_reg = rk3288_calc_pull_reg_and_bit, .drv_calc_reg = rk3288_calc_drv_reg_and_bit, }; static struct rockchip_pin_bank rk3308_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT), PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT, IOMUX_WIDTH_2BIT), }; static struct rockchip_pin_ctrl rk3308_pin_ctrl = { .pin_banks = rk3308_pin_banks, .nr_banks = ARRAY_SIZE(rk3308_pin_banks), .label = "RK3308-GPIO", .type = RK3308, .grf_mux_offset = 0x0, .iomux_recalced = rk3308_mux_recalced_data, .niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data), .iomux_routes = rk3308_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3308_mux_route_data), .pull_calc_reg = rk3308_calc_pull_reg_and_bit, .drv_calc_reg = rk3308_calc_drv_reg_and_bit, .schmitt_calc_reg = rk3308_calc_schmitt_reg_and_bit, }; static struct rockchip_pin_bank rk3328_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, IOMUX_WIDTH_3BIT, IOMUX_WIDTH_3BIT, 0), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_3BIT, IOMUX_WIDTH_3BIT, 0, 0), }; static struct rockchip_pin_ctrl rk3328_pin_ctrl = { .pin_banks = rk3328_pin_banks, .nr_banks = ARRAY_SIZE(rk3328_pin_banks), .label = "RK3328-GPIO", .type = RK3288, .grf_mux_offset = 0x0, .iomux_recalced = rk3328_mux_recalced_data, .niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data), .iomux_routes = rk3328_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3328_mux_route_data), .pull_calc_reg = rk3228_calc_pull_reg_and_bit, .drv_calc_reg = rk3228_calc_drv_reg_and_bit, .schmitt_calc_reg = rk3328_calc_schmitt_reg_and_bit, }; static struct rockchip_pin_bank rk3368_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU ), PIN_BANK(1, 32, "gpio1"), PIN_BANK(2, 32, "gpio2"), PIN_BANK(3, 32, "gpio3"), }; static struct rockchip_pin_ctrl rk3368_pin_ctrl = { .pin_banks = rk3368_pin_banks, .nr_banks = ARRAY_SIZE(rk3368_pin_banks), .label = "RK3368-GPIO", .type = RK3368, .grf_mux_offset = 0x0, .pmu_mux_offset = 0x0, .pull_calc_reg = rk3368_calc_pull_reg_and_bit, .drv_calc_reg = rk3368_calc_drv_reg_and_bit, }; static struct rockchip_pin_bank rk3399_pin_banks[] = { PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, DRV_TYPE_IO_1V8_ONLY, DRV_TYPE_IO_1V8_ONLY, DRV_TYPE_IO_DEFAULT, DRV_TYPE_IO_DEFAULT, 0x80, 0x88, -1, -1, PULL_TYPE_IO_1V8_ONLY, PULL_TYPE_IO_1V8_ONLY, PULL_TYPE_IO_DEFAULT, PULL_TYPE_IO_DEFAULT ), PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, IOMUX_SOURCE_PMU, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_OR_3V0, 0xa0, 0xa8, 0xb0, 0xb8 ), PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_ONLY, DRV_TYPE_IO_1V8_ONLY, PULL_TYPE_IO_DEFAULT, PULL_TYPE_IO_DEFAULT, PULL_TYPE_IO_1V8_ONLY, PULL_TYPE_IO_1V8_ONLY ), PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY, DRV_TYPE_IO_3V3_ONLY, DRV_TYPE_IO_3V3_ONLY, DRV_TYPE_IO_1V8_OR_3V0 ), PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_3V0_AUTO, DRV_TYPE_IO_1V8_OR_3V0, DRV_TYPE_IO_1V8_OR_3V0 ), }; static struct rockchip_pin_ctrl rk3399_pin_ctrl = { .pin_banks = rk3399_pin_banks, .nr_banks = ARRAY_SIZE(rk3399_pin_banks), .label = "RK3399-GPIO", .type = RK3399, .grf_mux_offset = 0xe000, .pmu_mux_offset = 0x0, .grf_drv_offset = 0xe100, .pmu_drv_offset = 0x80, .iomux_routes = rk3399_mux_route_data, .niomux_routes = ARRAY_SIZE(rk3399_mux_route_data), .pull_calc_reg = rk3399_calc_pull_reg_and_bit, .drv_calc_reg = rk3399_calc_drv_reg_and_bit, }; static const struct of_device_id rockchip_pinctrl_dt_match[] = { { .compatible = "rockchip,px30-pinctrl", .data = &px30_pin_ctrl }, { .compatible = "rockchip,rv1108-pinctrl", .data = &rv1108_pin_ctrl }, { .compatible = "rockchip,rk2928-pinctrl", .data = &rk2928_pin_ctrl }, { .compatible = "rockchip,rk3036-pinctrl", .data = &rk3036_pin_ctrl }, { .compatible = "rockchip,rk3066a-pinctrl", .data = &rk3066a_pin_ctrl }, { .compatible = "rockchip,rk3066b-pinctrl", .data = &rk3066b_pin_ctrl }, { .compatible = "rockchip,rk3128-pinctrl", .data = (void *)&rk3128_pin_ctrl }, { .compatible = "rockchip,rk3188-pinctrl", .data = &rk3188_pin_ctrl }, { .compatible = "rockchip,rk3228-pinctrl", .data = &rk3228_pin_ctrl }, { .compatible = "rockchip,rk3288-pinctrl", .data = &rk3288_pin_ctrl }, { .compatible = "rockchip,rk3308-pinctrl", .data = &rk3308_pin_ctrl }, { .compatible = "rockchip,rk3328-pinctrl", .data = &rk3328_pin_ctrl }, { .compatible = "rockchip,rk3368-pinctrl", .data = &rk3368_pin_ctrl }, { .compatible = "rockchip,rk3399-pinctrl", .data = &rk3399_pin_ctrl }, {}, }; static struct platform_driver rockchip_pinctrl_driver = { .probe = rockchip_pinctrl_probe, .driver = { .name = "rockchip-pinctrl", .pm = &rockchip_pinctrl_dev_pm_ops, .of_match_table = rockchip_pinctrl_dt_match, }, }; static int __init rockchip_pinctrl_drv_register(void) { return platform_driver_register(&rockchip_pinctrl_driver); } postcore_initcall(rockchip_pinctrl_drv_register);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1