Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
MyungJoo Ham | 1219 | 57.64% | 1 | 6.67% |
Chris Lapa | 807 | 38.16% | 6 | 40.00% |
Krzysztof Kozlowski | 46 | 2.17% | 2 | 13.33% |
Vaishali Thakkar | 30 | 1.42% | 1 | 6.67% |
Saurabh Sengar | 6 | 0.28% | 1 | 6.67% |
Paul Gortmaker | 3 | 0.14% | 1 | 6.67% |
Thomas Gleixner | 2 | 0.09% | 1 | 6.67% |
Axel Lin | 2 | 0.09% | 2 | 13.33% |
Total | 2115 | 15 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver * * Copyright (C) 2011 Samsung Electronics * MyungJoo Ham <myungjoo.ham@samsung.com> */ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/slab.h> #include <linux/power_supply.h> #include <linux/platform_device.h> #include <linux/power/max8903_charger.h> struct max8903_data { struct max8903_pdata *pdata; struct device *dev; struct power_supply *psy; struct power_supply_desc psy_desc; bool fault; bool usb_in; bool ta_in; }; static enum power_supply_property max8903_charger_props[] = { POWER_SUPPLY_PROP_STATUS, /* Charger status output */ POWER_SUPPLY_PROP_ONLINE, /* External power source */ POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */ }; static int max8903_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct max8903_data *data = power_supply_get_drvdata(psy); switch (psp) { case POWER_SUPPLY_PROP_STATUS: val->intval = POWER_SUPPLY_STATUS_UNKNOWN; if (gpio_is_valid(data->pdata->chg)) { if (gpio_get_value(data->pdata->chg) == 0) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (data->usb_in || data->ta_in) val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; else val->intval = POWER_SUPPLY_STATUS_DISCHARGING; } break; case POWER_SUPPLY_PROP_ONLINE: val->intval = 0; if (data->usb_in || data->ta_in) val->intval = 1; break; case POWER_SUPPLY_PROP_HEALTH: val->intval = POWER_SUPPLY_HEALTH_GOOD; if (data->fault) val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; break; default: return -EINVAL; } return 0; } static irqreturn_t max8903_dcin(int irq, void *_data) { struct max8903_data *data = _data; struct max8903_pdata *pdata = data->pdata; bool ta_in; enum power_supply_type old_type; ta_in = gpio_get_value(pdata->dok) ? false : true; if (ta_in == data->ta_in) return IRQ_HANDLED; data->ta_in = ta_in; /* Set Current-Limit-Mode 1:DC 0:USB */ if (gpio_is_valid(pdata->dcm)) gpio_set_value(pdata->dcm, ta_in ? 1 : 0); /* Charger Enable / Disable (cen is negated) */ if (gpio_is_valid(pdata->cen)) gpio_set_value(pdata->cen, ta_in ? 0 : (data->usb_in ? 0 : 1)); dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ? "Connected" : "Disconnected"); old_type = data->psy_desc.type; if (data->ta_in) data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; else if (data->usb_in) data->psy_desc.type = POWER_SUPPLY_TYPE_USB; else data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; if (old_type != data->psy_desc.type) power_supply_changed(data->psy); return IRQ_HANDLED; } static irqreturn_t max8903_usbin(int irq, void *_data) { struct max8903_data *data = _data; struct max8903_pdata *pdata = data->pdata; bool usb_in; enum power_supply_type old_type; usb_in = gpio_get_value(pdata->uok) ? false : true; if (usb_in == data->usb_in) return IRQ_HANDLED; data->usb_in = usb_in; /* Do not touch Current-Limit-Mode */ /* Charger Enable / Disable (cen is negated) */ if (gpio_is_valid(pdata->cen)) gpio_set_value(pdata->cen, usb_in ? 0 : (data->ta_in ? 0 : 1)); dev_dbg(data->dev, "USB Charger %s.\n", usb_in ? "Connected" : "Disconnected"); old_type = data->psy_desc.type; if (data->ta_in) data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; else if (data->usb_in) data->psy_desc.type = POWER_SUPPLY_TYPE_USB; else data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; if (old_type != data->psy_desc.type) power_supply_changed(data->psy); return IRQ_HANDLED; } static irqreturn_t max8903_fault(int irq, void *_data) { struct max8903_data *data = _data; struct max8903_pdata *pdata = data->pdata; bool fault; fault = gpio_get_value(pdata->flt) ? false : true; if (fault == data->fault) return IRQ_HANDLED; data->fault = fault; if (fault) dev_err(data->dev, "Charger suffers a fault and stops.\n"); else dev_err(data->dev, "Charger recovered from a fault.\n"); return IRQ_HANDLED; } static struct max8903_pdata *max8903_parse_dt_data(struct device *dev) { struct device_node *np = dev->of_node; struct max8903_pdata *pdata = NULL; if (!np) return NULL; pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; pdata->dc_valid = false; pdata->usb_valid = false; pdata->cen = of_get_named_gpio(np, "cen-gpios", 0); if (!gpio_is_valid(pdata->cen)) pdata->cen = -EINVAL; pdata->chg = of_get_named_gpio(np, "chg-gpios", 0); if (!gpio_is_valid(pdata->chg)) pdata->chg = -EINVAL; pdata->flt = of_get_named_gpio(np, "flt-gpios", 0); if (!gpio_is_valid(pdata->flt)) pdata->flt = -EINVAL; pdata->usus = of_get_named_gpio(np, "usus-gpios", 0); if (!gpio_is_valid(pdata->usus)) pdata->usus = -EINVAL; pdata->dcm = of_get_named_gpio(np, "dcm-gpios", 0); if (!gpio_is_valid(pdata->dcm)) pdata->dcm = -EINVAL; pdata->dok = of_get_named_gpio(np, "dok-gpios", 0); if (!gpio_is_valid(pdata->dok)) pdata->dok = -EINVAL; else pdata->dc_valid = true; pdata->uok = of_get_named_gpio(np, "uok-gpios", 0); if (!gpio_is_valid(pdata->uok)) pdata->uok = -EINVAL; else pdata->usb_valid = true; return pdata; } static int max8903_setup_gpios(struct platform_device *pdev) { struct max8903_data *data = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; struct max8903_pdata *pdata = pdev->dev.platform_data; int ret = 0; int gpio; int ta_in = 0; int usb_in = 0; if (pdata->dc_valid) { if (gpio_is_valid(pdata->dok)) { ret = devm_gpio_request(dev, pdata->dok, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for dok: %d err %d\n", pdata->dok, ret); return ret; } gpio = pdata->dok; /* PULL_UPed Interrupt */ ta_in = gpio_get_value(gpio) ? 0 : 1; } else { dev_err(dev, "When DC is wired, DOK should be wired as well.\n"); return -EINVAL; } } if (gpio_is_valid(pdata->dcm)) { ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for dcm: %d err %d\n", pdata->dcm, ret); return ret; } gpio = pdata->dcm; /* Output */ gpio_set_value(gpio, ta_in); } if (pdata->usb_valid) { if (gpio_is_valid(pdata->uok)) { ret = devm_gpio_request(dev, pdata->uok, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for uok: %d err %d\n", pdata->uok, ret); return ret; } gpio = pdata->uok; usb_in = gpio_get_value(gpio) ? 0 : 1; } else { dev_err(dev, "When USB is wired, UOK should be wired." "as well.\n"); return -EINVAL; } } if (gpio_is_valid(pdata->cen)) { ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for cen: %d err %d\n", pdata->cen, ret); return ret; } gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1); } if (gpio_is_valid(pdata->chg)) { ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for chg: %d err %d\n", pdata->chg, ret); return ret; } } if (gpio_is_valid(pdata->flt)) { ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for flt: %d err %d\n", pdata->flt, ret); return ret; } } if (gpio_is_valid(pdata->usus)) { ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name); if (ret) { dev_err(dev, "Failed GPIO request for usus: %d err %d\n", pdata->usus, ret); return ret; } } data->fault = false; data->ta_in = ta_in; data->usb_in = usb_in; return 0; } static int max8903_probe(struct platform_device *pdev) { struct max8903_data *data; struct device *dev = &pdev->dev; struct max8903_pdata *pdata = pdev->dev.platform_data; struct power_supply_config psy_cfg = {}; int ret = 0; data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL); if (!data) return -ENOMEM; if (IS_ENABLED(CONFIG_OF) && !pdata && dev->of_node) pdata = max8903_parse_dt_data(dev); if (!pdata) { dev_err(dev, "No platform data.\n"); return -EINVAL; } pdev->dev.platform_data = pdata; data->pdata = pdata; data->dev = dev; platform_set_drvdata(pdev, data); if (pdata->dc_valid == false && pdata->usb_valid == false) { dev_err(dev, "No valid power sources.\n"); return -EINVAL; } ret = max8903_setup_gpios(pdev); if (ret) return ret; data->psy_desc.name = "max8903_charger"; data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS : ((data->usb_in) ? POWER_SUPPLY_TYPE_USB : POWER_SUPPLY_TYPE_BATTERY); data->psy_desc.get_property = max8903_get_property; data->psy_desc.properties = max8903_charger_props; data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props); psy_cfg.of_node = dev->of_node; psy_cfg.drv_data = data; data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg); if (IS_ERR(data->psy)) { dev_err(dev, "failed: power supply register.\n"); return PTR_ERR(data->psy); } if (pdata->dc_valid) { ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok), NULL, max8903_dcin, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, "MAX8903 DC IN", data); if (ret) { dev_err(dev, "Cannot request irq %d for DC (%d)\n", gpio_to_irq(pdata->dok), ret); return ret; } } if (pdata->usb_valid) { ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok), NULL, max8903_usbin, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, "MAX8903 USB IN", data); if (ret) { dev_err(dev, "Cannot request irq %d for USB (%d)\n", gpio_to_irq(pdata->uok), ret); return ret; } } if (gpio_is_valid(pdata->flt)) { ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt), NULL, max8903_fault, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, "MAX8903 Fault", data); if (ret) { dev_err(dev, "Cannot request irq %d for Fault (%d)\n", gpio_to_irq(pdata->flt), ret); return ret; } } return 0; } static const struct of_device_id max8903_match_ids[] = { { .compatible = "maxim,max8903", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, max8903_match_ids); static struct platform_driver max8903_driver = { .probe = max8903_probe, .driver = { .name = "max8903-charger", .of_match_table = max8903_match_ids }, }; module_platform_driver(max8903_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("MAX8903 Charger Driver"); MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); MODULE_ALIAS("platform:max8903-charger");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1