| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Magnus Damm | 1651 | 92.03% | 1 | 8.33% |
| Alexis Lothoré | 94 | 5.24% | 2 | 16.67% |
| Haneen Mohammed | 20 | 1.11% | 1 | 8.33% |
| Sandhya Bankar | 15 | 0.84% | 1 | 8.33% |
| Nishad Kamdar | 8 | 0.45% | 1 | 8.33% |
| Greg Kroah-Hartman | 2 | 0.11% | 2 | 16.67% |
| Anchal Jain | 1 | 0.06% | 1 | 8.33% |
| Carmeli Tamir | 1 | 0.06% | 1 | 8.33% |
| Vatika Harlalka | 1 | 0.06% | 1 | 8.33% |
| Varsha Rao | 1 | 0.06% | 1 | 8.33% |
| Total | 1794 | 12 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * EMXX FCD (Function Controller Driver) for USB. * * Copyright (C) 2010 Renesas Electronics Corporation */ #ifndef _LINUX_EMXX_H #define _LINUX_EMXX_H /*---------------------------------------------------------------------------*/ /*----------------- Default undef */ #if 0 #define DEBUG #define UDC_DEBUG_DUMP #endif /*----------------- Default define */ #define USE_DMA 1 #define USE_SUSPEND_WAIT 1 /*------------ Board dependence(Resource) */ #define VBUS_VALUE GPIO_VBUS /* below hacked up for staging integration */ #define GPIO_VBUS 0 /* GPIO_P153 on KZM9D */ #define INT_VBUS 0 /* IRQ for GPIO_P153 */ struct gpio_desc *vbus_gpio; int vbus_irq; /*------------ Board dependence(Wait) */ /* CHATTERING wait time ms */ #define VBUS_CHATTERING_MDELAY 1 /* DMA Abort wait time ms */ #define DMA_DISABLE_TIME 10 /*------------ Controller dependence */ #define NUM_ENDPOINTS 14 /* Endpoint */ #define REG_EP_NUM 15 /* Endpoint Register */ #define DMA_MAX_COUNT 256 /* DMA Block */ #define EPC_RST_DISABLE_TIME 1 /* 1 usec */ #define EPC_DIRPD_DISABLE_TIME 1 /* 1 msec */ #define EPC_PLL_LOCK_COUNT 1000 /* 1000 */ #define IN_DATA_EMPTY_COUNT 1000 /* 1000 */ #define CHATGER_TIME 700 /* 700msec */ #define USB_SUSPEND_TIME 2000 /* 2 sec */ /* U2F FLAG */ #define U2F_ENABLE 1 #define U2F_DISABLE 0 /*------- BIT */ #define BIT00 0x00000001 #define BIT01 0x00000002 #define BIT02 0x00000004 #define BIT03 0x00000008 #define BIT04 0x00000010 #define BIT05 0x00000020 #define BIT06 0x00000040 #define BIT07 0x00000080 #define BIT08 0x00000100 #define BIT09 0x00000200 #define BIT10 0x00000400 #define BIT11 0x00000800 #define BIT12 0x00001000 #define BIT13 0x00002000 #define BIT14 0x00004000 #define BIT15 0x00008000 #define BIT16 0x00010000 #define BIT17 0x00020000 #define BIT18 0x00040000 #define BIT19 0x00080000 #define BIT20 0x00100000 #define BIT21 0x00200000 #define BIT22 0x00400000 #define BIT23 0x00800000 #define BIT24 0x01000000 #define BIT25 0x02000000 #define BIT26 0x04000000 #define BIT27 0x08000000 #define BIT28 0x10000000 #define BIT29 0x20000000 #define BIT30 0x40000000 #define BIT31 0x80000000 #define TEST_FORCE_ENABLE (BIT18 + BIT16) #define INT_SEL BIT10 #define CONSTFS BIT09 #define SOF_RCV BIT08 #define RSUM_IN BIT07 #define SUSPEND BIT06 #define CONF BIT05 #define DEFAULT BIT04 #define CONNECTB BIT03 #define PUE2 BIT02 #define MAX_TEST_MODE_NUM 0x05 #define TEST_MODE_SHIFT 16 /*------- (0x0004) USB Status Register */ #define SPEED_MODE BIT06 #define HIGH_SPEED BIT06 #define CONF BIT05 #define DEFAULT BIT04 #define USB_RST BIT03 #define SPND_OUT BIT02 #define RSUM_OUT BIT01 /*------- (0x0008) USB Address Register */ #define USB_ADDR 0x007F0000 #define SOF_STATUS BIT15 #define UFRAME (BIT14 + BIT13 + BIT12) #define FRAME 0x000007FF #define USB_ADRS_SHIFT 16 /*------- (0x000C) UTMI Characteristic 1 Register */ #define SQUSET (BIT07 + BIT06 + BIT05 + BIT04) #define USB_SQUSET (BIT06 + BIT05 + BIT04) /*------- (0x0010) TEST Control Register */ #define FORCEHS BIT02 #define CS_TESTMODEEN BIT01 #define LOOPBACK BIT00 /*------- (0x0018) Setup Data 0 Register */ /*------- (0x001C) Setup Data 1 Register */ /*------- (0x0020) USB Interrupt Status Register */ #define EPN_INT 0x00FFFF00 #define EP15_INT BIT23 #define EP14_INT BIT22 #define EP13_INT BIT21 #define EP12_INT BIT20 #define EP11_INT BIT19 #define EP10_INT BIT18 #define EP9_INT BIT17 #define EP8_INT BIT16 #define EP7_INT BIT15 #define EP6_INT BIT14 #define EP5_INT BIT13 #define EP4_INT BIT12 #define EP3_INT BIT11 #define EP2_INT BIT10 #define EP1_INT BIT09 #define EP0_INT BIT08 #define SPEED_MODE_INT BIT06 #define SOF_ERROR_INT BIT05 #define SOF_INT BIT04 #define USB_RST_INT BIT03 #define SPND_INT BIT02 #define RSUM_INT BIT01 #define USB_INT_STA_RW 0x7E /*------- (0x0024) USB Interrupt Enable Register */ #define EP15_0_EN 0x00FFFF00 #define EP15_EN BIT23 #define EP14_EN BIT22 #define EP13_EN BIT21 #define EP12_EN BIT20 #define EP11_EN BIT19 #define EP10_EN BIT18 #define EP9_EN BIT17 #define EP8_EN BIT16 #define EP7_EN BIT15 #define EP6_EN BIT14 #define EP5_EN BIT13 #define EP4_EN BIT12 #define EP3_EN BIT11 #define EP2_EN BIT10 #define EP1_EN BIT09 #define EP0_EN BIT08 #define SPEED_MODE_EN BIT06 #define SOF_ERROR_EN BIT05 #define SOF_EN BIT04 #define USB_RST_EN BIT03 #define SPND_EN BIT02 #define RSUM_EN BIT01 #define USB_INT_EN_BIT \ (EP0_EN | SPEED_MODE_EN | USB_RST_EN | SPND_EN | RSUM_EN) /*------- (0x0028) EP0 Control Register */ #define EP0_STGSEL BIT18 #define EP0_OVERSEL BIT17 #define EP0_AUTO BIT16 #define EP0_PIDCLR BIT09 #define EP0_BCLR BIT08 #define EP0_DEND BIT07 #define EP0_DW (BIT06 + BIT05) #define EP0_DW4 0 #define EP0_DW3 (BIT06 + BIT05) #define EP0_DW2 BIT06 #define EP0_DW1 BIT05 #define EP0_INAK_EN BIT04 #define EP0_PERR_NAK_CLR BIT03 #define EP0_STL BIT02 #define EP0_INAK BIT01 #define EP0_ONAK BIT00 /*------- (0x002C) EP0 Status Register */ #define EP0_PID BIT18 #define EP0_PERR_NAK BIT17 #define EP0_PERR_NAK_INT BIT16 #define EP0_OUT_NAK_INT BIT15 #define EP0_OUT_NULL BIT14 #define EP0_OUT_FULL BIT13 #define EP0_OUT_EMPTY BIT12 #define EP0_IN_NAK_INT BIT11 #define EP0_IN_DATA BIT10 #define EP0_IN_FULL BIT09 #define EP0_IN_EMPTY BIT08 #define EP0_OUT_NULL_INT BIT07 #define EP0_OUT_OR_INT BIT06 #define EP0_OUT_INT BIT05 #define EP0_IN_INT BIT04 #define EP0_STALL_INT BIT03 #define STG_END_INT BIT02 #define STG_START_INT BIT01 #define SETUP_INT BIT00 #define EP0_STATUS_RW_BIT (BIT16 | BIT15 | BIT11 | 0xFF) /*------- (0x0030) EP0 Interrupt Enable Register */ #define EP0_PERR_NAK_EN BIT16 #define EP0_OUT_NAK_EN BIT15 #define EP0_IN_NAK_EN BIT11 #define EP0_OUT_NULL_EN BIT07 #define EP0_OUT_OR_EN BIT06 #define EP0_OUT_EN BIT05 #define EP0_IN_EN BIT04 #define EP0_STALL_EN BIT03 #define STG_END_EN BIT02 #define STG_START_EN BIT01 #define SETUP_EN BIT00 #define EP0_INT_EN_BIT \ (EP0_OUT_OR_EN | EP0_OUT_EN | EP0_IN_EN | STG_END_EN | SETUP_EN) /*------- (0x0034) EP0 Length Register */ #define EP0_LDATA 0x0000007F /*------- (0x0038) EP0 Read Register */ /*------- (0x003C) EP0 Write Register */ /*------- (0x0040:) EPN Control Register */ #define EPN_EN BIT31 #define EPN_BUF_TYPE BIT30 #define EPN_BUF_SINGLE BIT30 #define EPN_DIR0 BIT26 #define EPN_MODE (BIT25 + BIT24) #define EPN_BULK 0 #define EPN_INTERRUPT BIT24 #define EPN_ISO BIT25 #define EPN_OVERSEL BIT17 #define EPN_AUTO BIT16 #define EPN_IPIDCLR BIT11 #define EPN_OPIDCLR BIT10 #define EPN_BCLR BIT09 #define EPN_CBCLR BIT08 #define EPN_DEND BIT07 #define EPN_DW (BIT06 + BIT05) #define EPN_DW4 0 #define EPN_DW3 (BIT06 + BIT05) #define EPN_DW2 BIT06 #define EPN_DW1 BIT05 #define EPN_OSTL_EN BIT04 #define EPN_ISTL BIT03 #define EPN_OSTL BIT02 #define EPN_ONAK BIT00 /*------- (0x0044:) EPN Status Register */ #define EPN_ISO_PIDERR BIT29 /* R */ #define EPN_OPID BIT28 /* R */ #define EPN_OUT_NOTKN BIT27 /* R */ #define EPN_ISO_OR BIT26 /* R */ #define EPN_ISO_CRC BIT24 /* R */ #define EPN_OUT_END_INT BIT23 /* RW */ #define EPN_OUT_OR_INT BIT22 /* RW */ #define EPN_OUT_NAK_ERR_INT BIT21 /* RW */ #define EPN_OUT_STALL_INT BIT20 /* RW */ #define EPN_OUT_INT BIT19 /* RW */ #define EPN_OUT_NULL_INT BIT18 /* RW */ #define EPN_OUT_FULL BIT17 /* R */ #define EPN_OUT_EMPTY BIT16 /* R */ #define EPN_IPID BIT10 /* R */ #define EPN_IN_NOTKN BIT09 /* R */ #define EPN_ISO_UR BIT08 /* R */ #define EPN_IN_END_INT BIT07 /* RW */ #define EPN_IN_NAK_ERR_INT BIT05 /* RW */ #define EPN_IN_STALL_INT BIT04 /* RW */ #define EPN_IN_INT BIT03 /* RW */ #define EPN_IN_DATA BIT02 /* R */ #define EPN_IN_FULL BIT01 /* R */ #define EPN_IN_EMPTY BIT00 /* R */ #define EPN_INT_EN \ (EPN_OUT_END_INT | EPN_OUT_INT | EPN_IN_END_INT | EPN_IN_INT) /*------- (0x0048:) EPN Interrupt Enable Register */ #define EPN_OUT_END_EN BIT23 /* RW */ #define EPN_OUT_OR_EN BIT22 /* RW */ #define EPN_OUT_NAK_ERR_EN BIT21 /* RW */ #define EPN_OUT_STALL_EN BIT20 /* RW */ #define EPN_OUT_EN BIT19 /* RW */ #define EPN_OUT_NULL_EN BIT18 /* RW */ #define EPN_IN_END_EN BIT07 /* RW */ #define EPN_IN_NAK_ERR_EN BIT05 /* RW */ #define EPN_IN_STALL_EN BIT04 /* RW */ #define EPN_IN_EN BIT03 /* RW */ /*------- (0x004C:) EPN Interrupt Enable Register */ #define EPN_STOP_MODE BIT11 #define EPN_DEND_SET BIT10 #define EPN_BURST_SET BIT09 #define EPN_STOP_SET BIT08 #define EPN_DMA_EN BIT04 #define EPN_DMAMODE0 BIT00 /*------- (0x0050:) EPN MaxPacket & BaseAddress Register */ #define EPN_BASEAD 0x1FFF0000 #define EPN_MPKT 0x000007FF /*------- (0x0054:) EPN Length & DMA Count Register */ #define EPN_DMACNT 0x01FF0000 #define EPN_LDATA 0x000007FF /*------- (0x0058:) EPN Read Register */ /*------- (0x005C:) EPN Write Register */ /*------- (0x1000) AHBSCTR Register */ #define WAIT_MODE BIT00 /*------- (0x1004) AHBMCTR Register */ #define ARBITER_CTR BIT31 /* RW */ #define MCYCLE_RST BIT12 /* RW */ #define ENDIAN_CTR (BIT09 + BIT08) /* RW */ #define ENDIAN_BYTE_SWAP BIT09 #define ENDIAN_HALF_WORD_SWAP ENDIAN_CTR #define HBUSREQ_MODE BIT05 /* RW */ #define HTRANS_MODE BIT04 /* RW */ #define WBURST_TYPE BIT02 /* RW */ #define BURST_TYPE (BIT01 + BIT00) /* RW */ #define BURST_MAX_16 0 #define BURST_MAX_8 BIT00 #define BURST_MAX_4 BIT01 #define BURST_SINGLE BURST_TYPE /*------- (0x1008) AHBBINT Register */ #define DMA_ENDINT 0xFFFE0000 /* RW */ #define AHB_VBUS_INT BIT13 /* RW */ #define MBUS_ERRINT BIT06 /* RW */ #define SBUS_ERRINT0 BIT04 /* RW */ #define ERR_MASTER 0x0000000F /* R */ /*------- (0x100C) AHBBINTEN Register */ #define DMA_ENDINTEN 0xFFFE0000 /* RW */ #define VBUS_INTEN BIT13 /* RW */ #define MBUS_ERRINTEN BIT06 /* RW */ #define SBUS_ERRINT0EN BIT04 /* RW */ /*------- (0x1010) EPCTR Register */ #define DIRPD BIT12 /* RW */ #define VBUS_LEVEL BIT08 /* R */ #define PLL_RESUME BIT05 /* RW */ #define PLL_LOCK BIT04 /* R */ #define EPC_RST BIT00 /* RW */ /*------- (0x1014) USBF_EPTEST Register */ #define LINESTATE (BIT09 + BIT08) /* R */ #define DM_LEVEL BIT09 /* R */ #define DP_LEVEL BIT08 /* R */ #define PHY_TST BIT01 /* RW */ #define PHY_TSTCLK BIT00 /* RW */ /*------- (0x1020) USBSSVER Register */ #define AHBB_VER 0x00FF0000 /* R */ #define EPC_VER 0x0000FF00 /* R */ #define SS_VER 0x000000FF /* R */ /*------- (0x1024) USBSSCONF Register */ #define EP_AVAILABLE 0xFFFF0000 /* R */ #define DMA_AVAILABLE 0x0000FFFF /* R */ /*------- (0x1110:) EPNDCR1 Register */ #define DCR1_EPN_DMACNT 0x00FF0000 /* RW */ #define DCR1_EPN_DIR0 BIT01 /* RW */ #define DCR1_EPN_REQEN BIT00 /* RW */ /*------- (0x1114:) EPNDCR2 Register */ #define DCR2_EPN_LMPKT 0x07FF0000 /* RW */ #define DCR2_EPN_MPKT 0x000007FF /* RW */ /*------- (0x1118:) EPNTADR Register */ #define EPN_TADR 0xFFFFFFFF /* RW */ /*===========================================================================*/ /* Struct */ /*------- ep_regs */ struct ep_regs { u32 EP_CONTROL; /* EP Control */ u32 EP_STATUS; /* EP Status */ u32 EP_INT_ENA; /* EP Interrupt Enable */ u32 EP_DMA_CTRL; /* EP DMA Control */ u32 EP_PCKT_ADRS; /* EP Maxpacket & BaseAddress */ u32 EP_LEN_DCNT; /* EP Length & DMA count */ u32 EP_READ; /* EP Read */ u32 EP_WRITE; /* EP Write */ }; /*------- ep_dcr */ struct ep_dcr { u32 EP_DCR1; /* EP_DCR1 */ u32 EP_DCR2; /* EP_DCR2 */ u32 EP_TADR; /* EP_TADR */ u32 Reserved; /* Reserved */ }; /*------- Function Registers */ struct fc_regs { u32 USB_CONTROL; /* (0x0000) USB Control */ u32 USB_STATUS; /* (0x0004) USB Status */ u32 USB_ADDRESS; /* (0x0008) USB Address */ u32 UTMI_CHARACTER_1; /* (0x000C) UTMI Setting */ u32 TEST_CONTROL; /* (0x0010) TEST Control */ u32 reserved_14; /* (0x0014) Reserved */ u32 SETUP_DATA0; /* (0x0018) Setup Data0 */ u32 SETUP_DATA1; /* (0x001C) Setup Data1 */ u32 USB_INT_STA; /* (0x0020) USB Interrupt Status */ u32 USB_INT_ENA; /* (0x0024) USB Interrupt Enable */ u32 EP0_CONTROL; /* (0x0028) EP0 Control */ u32 EP0_STATUS; /* (0x002C) EP0 Status */ u32 EP0_INT_ENA; /* (0x0030) EP0 Interrupt Enable */ u32 EP0_LENGTH; /* (0x0034) EP0 Length */ u32 EP0_READ; /* (0x0038) EP0 Read */ u32 EP0_WRITE; /* (0x003C) EP0 Write */ struct ep_regs EP_REGS[REG_EP_NUM]; /* Endpoint Register */ u8 reserved_220[0x1000 - 0x220]; /* (0x0220:0x0FFF) Reserved */ u32 AHBSCTR; /* (0x1000) AHBSCTR */ u32 AHBMCTR; /* (0x1004) AHBMCTR */ u32 AHBBINT; /* (0x1008) AHBBINT */ u32 AHBBINTEN; /* (0x100C) AHBBINTEN */ u32 EPCTR; /* (0x1010) EPCTR */ u32 USBF_EPTEST; /* (0x1014) USBF_EPTEST */ u8 reserved_1018[0x20 - 0x18]; /* (0x1018:0x101F) Reserved */ u32 USBSSVER; /* (0x1020) USBSSVER */ u32 USBSSCONF; /* (0x1024) USBSSCONF */ u8 reserved_1028[0x110 - 0x28]; /* (0x1028:0x110F) Reserved */ struct ep_dcr EP_DCR[REG_EP_NUM]; /* */ u8 reserved_1200[0x1000 - 0x200]; /* Reserved */ } __aligned(32); #define EP0_PACKETSIZE 64 #define EP_PACKETSIZE 1024 /* EPN RAM SIZE */ #define D_RAM_SIZE_CTRL 64 /* EPN Bulk Endpoint Max Packet Size */ #define D_FS_RAM_SIZE_BULK 64 #define D_HS_RAM_SIZE_BULK 512 struct nbu2ss_udc; enum ep0_state { EP0_IDLE, EP0_IN_DATA_PHASE, EP0_OUT_DATA_PHASE, EP0_IN_STATUS_PHASE, EP0_OUT_STATUS_PAHSE, EP0_END_XFER, EP0_SUSPEND, EP0_STALL, }; struct nbu2ss_req { struct usb_request req; struct list_head queue; u32 div_len; bool dma_flag; bool zero; bool unaligned; unsigned mapped:1; }; struct nbu2ss_ep { struct usb_ep ep; struct list_head queue; struct nbu2ss_udc *udc; const struct usb_endpoint_descriptor *desc; u8 epnum; u8 direct; u8 ep_type; unsigned wedged:1; unsigned halted:1; unsigned stalled:1; u8 *virt_buf; dma_addr_t phys_buf; }; struct nbu2ss_udc { struct usb_gadget gadget; struct usb_gadget_driver *driver; struct platform_device *pdev; struct device *dev; spinlock_t lock; /* Protects nbu2ss_udc structure fields */ struct completion *pdone; enum ep0_state ep0state; enum usb_device_state devstate; struct usb_ctrlrequest ctrl; struct nbu2ss_req ep0_req; u8 ep0_buf[EP0_PACKETSIZE]; struct nbu2ss_ep ep[NUM_ENDPOINTS]; unsigned softconnect:1; unsigned vbus_active:1; unsigned linux_suspended:1; unsigned linux_resume:1; unsigned usb_suspended:1; unsigned remote_wakeup:1; unsigned udc_enabled:1; unsigned int mA; u32 curr_config; /* Current Configuration Number */ struct fc_regs __iomem *p_regs; }; /* USB register access structure */ union usb_reg_access { struct { unsigned char DATA[4]; } byte; unsigned int dw; }; /*-------------------------------------------------------------------------*/ #endif /* _LINUX_EMXX_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1