| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Sudip Mukherjee | 1784 | 49.35% | 1 | 2.86% |
| Jan Kiszka | 1028 | 28.44% | 11 | 31.43% |
| Andy Shevchenko | 393 | 10.87% | 10 | 28.57% |
| Jay Dolan | 145 | 4.01% | 1 | 2.86% |
| Aaron Sierra | 144 | 3.98% | 3 | 8.57% |
| Daniel Golle | 108 | 2.99% | 1 | 2.86% |
| zhengbin | 3 | 0.08% | 1 | 2.86% |
| Robert Middleton | 3 | 0.08% | 1 | 2.86% |
| Chuhong Yuan | 2 | 0.06% | 1 | 2.86% |
| Greg Kroah-Hartman | 2 | 0.06% | 2 | 5.71% |
| Gustavo A. R. Silva | 1 | 0.03% | 1 | 2.86% |
| Arvind Yadav | 1 | 0.03% | 1 | 2.86% |
| Su Bao Cheng | 1 | 0.03% | 1 | 2.86% |
| Total | 3615 | 35 |
// SPDX-License-Identifier: GPL-2.0 /* * Probe module for 8250/16550-type Exar chips PCI serial ports. * * Based on drivers/tty/serial/8250/8250_pci.c, * * Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved. */ #include <linux/acpi.h> #include <linux/dmi.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/property.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/tty.h> #include <linux/8250_pci.h> #include <linux/delay.h> #include <asm/byteorder.h> #include "8250.h" #define PCI_DEVICE_ID_ACCES_COM_2S 0x1052 #define PCI_DEVICE_ID_ACCES_COM_4S 0x105d #define PCI_DEVICE_ID_ACCES_COM_8S 0x106c #define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8 #define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2 #define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db #define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea #define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 #define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 #define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a #define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 #define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 #define UART_EXAR_INT0 0x80 #define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ #define UART_EXAR_SLEEP 0x8b /* Sleep mode */ #define UART_EXAR_DVID 0x8d /* Device identification */ #define UART_EXAR_FCTR 0x08 /* Feature Control Register */ #define UART_FCTR_EXAR_IRDA 0x10 /* IrDa data encode select */ #define UART_FCTR_EXAR_485 0x20 /* Auto 485 half duplex dir ctl */ #define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ #define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ #define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ #define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ #define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ #define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ #define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */ #define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */ #define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */ #define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */ #define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */ #define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */ #define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */ #define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */ #define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */ #define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */ #define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */ #define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */ #define UART_EXAR_RS485_DLY(x) ((x) << 4) /* * IOT2040 MPIO wiring semantics: * * MPIO Port Function * ---- ---- -------- * 0 2 Mode bit 0 * 1 2 Mode bit 1 * 2 2 Terminate bus * 3 - <reserved> * 4 3 Mode bit 0 * 5 3 Mode bit 1 * 6 3 Terminate bus * 7 - <reserved> * 8 2 Enable * 9 3 Enable * 10 - Red LED * 11..15 - <unused> */ /* IOT2040 MPIOs 0..7 */ #define IOT2040_UART_MODE_RS232 0x01 #define IOT2040_UART_MODE_RS485 0x02 #define IOT2040_UART_MODE_RS422 0x03 #define IOT2040_UART_TERMINATE_BUS 0x04 #define IOT2040_UART1_MASK 0x0f #define IOT2040_UART2_SHIFT 4 #define IOT2040_UARTS_DEFAULT_MODE 0x11 /* both RS232 */ #define IOT2040_UARTS_GPIO_LO_MODE 0x88 /* reserved pins as input */ /* IOT2040 MPIOs 8..15 */ #define IOT2040_UARTS_ENABLE 0x03 #define IOT2040_UARTS_GPIO_HI_MODE 0xF8 /* enable & LED as outputs */ struct exar8250; struct exar8250_platform { int (*rs485_config)(struct uart_port *, struct serial_rs485 *); int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); }; /** * struct exar8250_board - board information * @num_ports: number of serial ports * @reg_shift: describes UART register mapping in PCI memory * @setup: quirk run at ->probe() stage * @exit: quirk run at ->remove() stage */ struct exar8250_board { unsigned int num_ports; unsigned int reg_shift; int (*setup)(struct exar8250 *, struct pci_dev *, struct uart_8250_port *, int); void (*exit)(struct pci_dev *pcidev); }; struct exar8250 { unsigned int nr; struct exar8250_board *board; void __iomem *virt; int line[]; }; static void exar_pm(struct uart_port *port, unsigned int state, unsigned int old) { /* * Exar UARTs have a SLEEP register that enables or disables each UART * to enter sleep mode separately. On the XR17V35x the register * is accessible to each UART at the UART_EXAR_SLEEP offset, but * the UART channel may only write to the corresponding bit. */ serial_port_out(port, UART_EXAR_SLEEP, state ? 0xff : 0); } /* * XR17V35x UARTs have an extra fractional divisor register (DLD) * Calculate divisor with extra 4-bit fractional portion */ static unsigned int xr17v35x_get_divisor(struct uart_port *p, unsigned int baud, unsigned int *frac) { unsigned int quot_16; quot_16 = DIV_ROUND_CLOSEST(p->uartclk, baud); *frac = quot_16 & 0x0f; return quot_16 >> 4; } static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud, unsigned int quot, unsigned int quot_frac) { serial8250_do_set_divisor(p, baud, quot, quot_frac); /* Preserve bits not related to baudrate; DLD[7:4]. */ quot_frac |= serial_port_in(p, 0x2) & 0xf0; serial_port_out(p, 0x2, quot_frac); } static int xr17v35x_startup(struct uart_port *port) { /* * First enable access to IER [7:5], ISR [5:4], FCR [5:4], * MCR [7:5] and MSR [7:0] */ serial_port_out(port, UART_XR_EFR, UART_EFR_ECB); /* * Make sure all interrups are masked until initialization is * complete and the FIFOs are cleared */ serial_port_out(port, UART_IER, 0); return serial8250_do_startup(port); } static void exar_shutdown(struct uart_port *port) { unsigned char lsr; bool tx_complete = false; struct uart_8250_port *up = up_to_u8250p(port); struct circ_buf *xmit = &port->state->xmit; int i = 0; do { lsr = serial_in(up, UART_LSR); if (lsr & (UART_LSR_TEMT | UART_LSR_THRE)) tx_complete = true; else tx_complete = false; usleep_range(1000, 1100); } while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000); serial8250_do_shutdown(port); } static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev, int idx, unsigned int offset, struct uart_8250_port *port) { const struct exar8250_board *board = priv->board; unsigned int bar = 0; unsigned char status; port->port.iotype = UPIO_MEM; port->port.mapbase = pci_resource_start(pcidev, bar) + offset; port->port.membase = priv->virt + offset; port->port.regshift = board->reg_shift; /* * XR17V35x UARTs have an extra divisor register, DLD that gets enabled * with when DLAB is set which will cause the device to incorrectly match * and assign port type to PORT_16650. The EFR for this UART is found * at offset 0x09. Instead check the Deice ID (DVID) register * for a 2, 4 or 8 port UART. */ status = readb(port->port.membase + UART_EXAR_DVID); if (status == 0x82 || status == 0x84 || status == 0x88) { port->port.type = PORT_XR17V35X; port->port.get_divisor = xr17v35x_get_divisor; port->port.set_divisor = xr17v35x_set_divisor; port->port.startup = xr17v35x_startup; } else { port->port.type = PORT_XR17D15X; } port->port.pm = exar_pm; port->port.shutdown = exar_shutdown; return 0; } static int pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { unsigned int offset = idx * 0x200; unsigned int baud = 1843200; u8 __iomem *p; int err; port->port.uartclk = baud * 16; err = default_setup(priv, pcidev, idx, offset, port); if (err) return err; p = port->port.membase; writeb(0x00, p + UART_EXAR_8XMODE); writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); writeb(32, p + UART_EXAR_TXTRG); writeb(32, p + UART_EXAR_RXTRG); /* * Setup Multipurpose Input/Output pins. */ if (idx == 0) { switch (pcidev->device) { case PCI_DEVICE_ID_COMMTECH_4222PCI335: case PCI_DEVICE_ID_COMMTECH_4224PCI335: writeb(0x78, p + UART_EXAR_MPIOLVL_7_0); writeb(0x00, p + UART_EXAR_MPIOINV_7_0); writeb(0x00, p + UART_EXAR_MPIOSEL_7_0); break; case PCI_DEVICE_ID_COMMTECH_2324PCI335: case PCI_DEVICE_ID_COMMTECH_2328PCI335: writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); writeb(0xc0, p + UART_EXAR_MPIOINV_7_0); writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0); break; } writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIO3T_7_0); writeb(0x00, p + UART_EXAR_MPIOOD_7_0); } return 0; } static int pci_connect_tech_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { unsigned int offset = idx * 0x200; unsigned int baud = 1843200; port->port.uartclk = baud * 16; return default_setup(priv, pcidev, idx, offset, port); } static int pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { unsigned int offset = idx * 0x200; unsigned int baud = 921600; port->port.uartclk = baud * 16; return default_setup(priv, pcidev, idx, offset, port); } static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) { /* * The Commtech adapters required the MPIOs to be driven low. The Exar * devices will export them as GPIOs, so we pre-configure them safely * as inputs. */ u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00; writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); writeb(0x00, p + UART_EXAR_MPIO3T_7_0); writeb(0x00, p + UART_EXAR_MPIOINV_7_0); writeb(dir, p + UART_EXAR_MPIOSEL_7_0); writeb(0x00, p + UART_EXAR_MPIOOD_7_0); writeb(0x00, p + UART_EXAR_MPIOINT_15_8); writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); writeb(0x00, p + UART_EXAR_MPIO3T_15_8); writeb(0x00, p + UART_EXAR_MPIOINV_15_8); writeb(dir, p + UART_EXAR_MPIOSEL_15_8); writeb(0x00, p + UART_EXAR_MPIOOD_15_8); } static void * __xr17v35x_register_gpio(struct pci_dev *pcidev, const struct property_entry *properties) { struct platform_device *pdev; pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO); if (!pdev) return NULL; pdev->dev.parent = &pcidev->dev; ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); if (platform_device_add_properties(pdev, properties) < 0 || platform_device_add(pdev) < 0) { platform_device_put(pdev); return NULL; } return pdev; } static const struct property_entry exar_gpio_properties[] = { PROPERTY_ENTRY_U32("exar,first-pin", 0), PROPERTY_ENTRY_U32("ngpios", 16), { } }; static int xr17v35x_register_gpio(struct pci_dev *pcidev, struct uart_8250_port *port) { if (pcidev->vendor == PCI_VENDOR_ID_EXAR) port->port.private_data = __xr17v35x_register_gpio(pcidev, exar_gpio_properties); return 0; } static int generic_rs485_config(struct uart_port *port, struct serial_rs485 *rs485) { bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); u8 __iomem *p = port->membase; u8 value; value = readb(p + UART_EXAR_FCTR); if (is_rs485) value |= UART_FCTR_EXAR_485; else value &= ~UART_FCTR_EXAR_485; writeb(value, p + UART_EXAR_FCTR); if (is_rs485) writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); port->rs485 = *rs485; return 0; } static const struct exar8250_platform exar8250_default_platform = { .register_gpio = xr17v35x_register_gpio, .rs485_config = generic_rs485_config, }; static int iot2040_rs485_config(struct uart_port *port, struct serial_rs485 *rs485) { bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); u8 __iomem *p = port->membase; u8 mask = IOT2040_UART1_MASK; u8 mode, value; if (is_rs485) { if (rs485->flags & SER_RS485_RX_DURING_TX) mode = IOT2040_UART_MODE_RS422; else mode = IOT2040_UART_MODE_RS485; if (rs485->flags & SER_RS485_TERMINATE_BUS) mode |= IOT2040_UART_TERMINATE_BUS; } else { mode = IOT2040_UART_MODE_RS232; } if (port->line == 3) { mask <<= IOT2040_UART2_SHIFT; mode <<= IOT2040_UART2_SHIFT; } value = readb(p + UART_EXAR_MPIOLVL_7_0); value &= ~mask; value |= mode; writeb(value, p + UART_EXAR_MPIOLVL_7_0); return generic_rs485_config(port, rs485); } static const struct property_entry iot2040_gpio_properties[] = { PROPERTY_ENTRY_U32("exar,first-pin", 10), PROPERTY_ENTRY_U32("ngpios", 1), { } }; static int iot2040_register_gpio(struct pci_dev *pcidev, struct uart_8250_port *port) { u8 __iomem *p = port->port.membase; writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0); writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0); writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8); writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8); port->port.private_data = __xr17v35x_register_gpio(pcidev, iot2040_gpio_properties); return 0; } static const struct exar8250_platform iot2040_platform = { .rs485_config = iot2040_rs485_config, .register_gpio = iot2040_register_gpio, }; /* * For SIMATIC IOT2000, only IOT2040 and its variants have the Exar device, * IOT2020 doesn't have. Therefore it is sufficient to match on the common * board name after the device was found. */ static const struct dmi_system_id exar_platforms[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), }, .driver_data = (void *)&iot2040_platform, }, {} }; static int pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { const struct exar8250_platform *platform; const struct dmi_system_id *dmi_match; unsigned int offset = idx * 0x400; unsigned int baud = 7812500; u8 __iomem *p; int ret; dmi_match = dmi_first_match(exar_platforms); if (dmi_match) platform = dmi_match->driver_data; else platform = &exar8250_default_platform; port->port.uartclk = baud * 16; port->port.rs485_config = platform->rs485_config; /* * Setup the UART clock for the devices on expansion slot to * half the clock speed of the main chip (which is 125MHz) */ if (idx >= 8) port->port.uartclk /= 2; ret = default_setup(priv, pcidev, idx, offset, port); if (ret) return ret; p = port->port.membase; writeb(0x00, p + UART_EXAR_8XMODE); writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); writeb(128, p + UART_EXAR_TXTRG); writeb(128, p + UART_EXAR_RXTRG); if (idx == 0) { /* Setup Multipurpose Input/Output pins. */ setup_gpio(pcidev, p); ret = platform->register_gpio(pcidev, port); } return ret; } static void pci_xr17v35x_exit(struct pci_dev *pcidev) { struct exar8250 *priv = pci_get_drvdata(pcidev); struct uart_8250_port *port = serial8250_get_port(priv->line[0]); struct platform_device *pdev = port->port.private_data; platform_device_unregister(pdev); port->port.private_data = NULL; } static inline void exar_misc_clear(struct exar8250 *priv) { /* Clear all PCI interrupts by reading INT0. No effect on IIR */ readb(priv->virt + UART_EXAR_INT0); /* Clear INT0 for Expansion Interface slave ports, too */ if (priv->board->num_ports > 8) readb(priv->virt + 0x2000 + UART_EXAR_INT0); } /* * These Exar UARTs have an extra interrupt indicator that could fire for a * few interrupts that are not presented/cleared through IIR. One of which is * a wakeup interrupt when coming out of sleep. These interrupts are only * cleared by reading global INT0 or INT1 registers as interrupts are * associated with channel 0. The INT[3:0] registers _are_ accessible from each * channel's address space, but for the sake of bus efficiency we register a * dedicated handler at the PCI device level to handle them. */ static irqreturn_t exar_misc_handler(int irq, void *data) { exar_misc_clear(data); return IRQ_HANDLED; } static int exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) { unsigned int nr_ports, i, bar = 0, maxnr; struct exar8250_board *board; struct uart_8250_port uart; struct exar8250 *priv; int rc; board = (struct exar8250_board *)ent->driver_data; if (!board) return -EINVAL; rc = pcim_enable_device(pcidev); if (rc) return rc; maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3); nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL); if (!priv) return -ENOMEM; priv->board = board; priv->virt = pcim_iomap(pcidev, bar, 0); if (!priv->virt) return -ENOMEM; pci_set_master(pcidev); rc = pci_alloc_irq_vectors(pcidev, 1, 1, PCI_IRQ_ALL_TYPES); if (rc < 0) return rc; memset(&uart, 0, sizeof(uart)); uart.port.flags = UPF_SHARE_IRQ | UPF_EXAR_EFR | UPF_FIXED_TYPE | UPF_FIXED_PORT; uart.port.irq = pci_irq_vector(pcidev, 0); uart.port.dev = &pcidev->dev; rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler, IRQF_SHARED, "exar_uart", priv); if (rc) return rc; /* Clear interrupts */ exar_misc_clear(priv); for (i = 0; i < nr_ports && i < maxnr; i++) { rc = board->setup(priv, pcidev, &uart, i); if (rc) { dev_err(&pcidev->dev, "Failed to setup port %u\n", i); break; } dev_dbg(&pcidev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype); priv->line[i] = serial8250_register_8250_port(&uart); if (priv->line[i] < 0) { dev_err(&pcidev->dev, "Couldn't register serial port %lx, irq %d, type %d, error %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype, priv->line[i]); break; } } priv->nr = i; pci_set_drvdata(pcidev, priv); return 0; } static void exar_pci_remove(struct pci_dev *pcidev) { struct exar8250 *priv = pci_get_drvdata(pcidev); unsigned int i; for (i = 0; i < priv->nr; i++) serial8250_unregister_port(priv->line[i]); if (priv->board->exit) priv->board->exit(pcidev); } static int __maybe_unused exar_suspend(struct device *dev) { struct pci_dev *pcidev = to_pci_dev(dev); struct exar8250 *priv = pci_get_drvdata(pcidev); unsigned int i; for (i = 0; i < priv->nr; i++) if (priv->line[i] >= 0) serial8250_suspend_port(priv->line[i]); /* Ensure that every init quirk is properly torn down */ if (priv->board->exit) priv->board->exit(pcidev); return 0; } static int __maybe_unused exar_resume(struct device *dev) { struct exar8250 *priv = dev_get_drvdata(dev); unsigned int i; exar_misc_clear(priv); for (i = 0; i < priv->nr; i++) if (priv->line[i] >= 0) serial8250_resume_port(priv->line[i]); return 0; } static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); static const struct exar8250_board acces_com_2x = { .num_ports = 2, .setup = pci_xr17c154_setup, }; static const struct exar8250_board acces_com_4x = { .num_ports = 4, .setup = pci_xr17c154_setup, }; static const struct exar8250_board acces_com_8x = { .num_ports = 8, .setup = pci_xr17c154_setup, }; static const struct exar8250_board pbn_fastcom335_2 = { .num_ports = 2, .setup = pci_fastcom335_setup, }; static const struct exar8250_board pbn_fastcom335_4 = { .num_ports = 4, .setup = pci_fastcom335_setup, }; static const struct exar8250_board pbn_fastcom335_8 = { .num_ports = 8, .setup = pci_fastcom335_setup, }; static const struct exar8250_board pbn_connect = { .setup = pci_connect_tech_setup, }; static const struct exar8250_board pbn_exar_ibm_saturn = { .num_ports = 1, .setup = pci_xr17c154_setup, }; static const struct exar8250_board pbn_exar_XR17C15x = { .setup = pci_xr17c154_setup, }; static const struct exar8250_board pbn_exar_XR17V35x = { .setup = pci_xr17v35x_setup, .exit = pci_xr17v35x_exit, }; static const struct exar8250_board pbn_exar_XR17V4358 = { .num_ports = 12, .setup = pci_xr17v35x_setup, .exit = pci_xr17v35x_exit, }; static const struct exar8250_board pbn_exar_XR17V8358 = { .num_ports = 16, .setup = pci_xr17v35x_setup, .exit = pci_xr17v35x_exit, }; #define CONNECT_DEVICE(devid, sdevid, bd) { \ PCI_DEVICE_SUB( \ PCI_VENDOR_ID_EXAR, \ PCI_DEVICE_ID_EXAR_##devid, \ PCI_SUBVENDOR_ID_CONNECT_TECH, \ PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_##sdevid), 0, 0, \ (kernel_ulong_t)&bd \ } #define EXAR_DEVICE(vend, devid, bd) { \ PCI_VDEVICE(vend, PCI_DEVICE_ID_##devid), (kernel_ulong_t)&bd \ } #define IBM_DEVICE(devid, sdevid, bd) { \ PCI_DEVICE_SUB( \ PCI_VENDOR_ID_EXAR, \ PCI_DEVICE_ID_EXAR_##devid, \ PCI_VENDOR_ID_IBM, \ PCI_SUBDEVICE_ID_IBM_##sdevid), 0, 0, \ (kernel_ulong_t)&bd \ } static const struct pci_device_id exar_pci_tbl[] = { EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x), EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x), EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x), EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x), EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x), EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x), EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x), CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), CONNECT_DEVICE(XR17C152, UART_1_1, pbn_connect), CONNECT_DEVICE(XR17C154, UART_2_2, pbn_connect), CONNECT_DEVICE(XR17C158, UART_4_4, pbn_connect), CONNECT_DEVICE(XR17C152, UART_2, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8, pbn_connect), CONNECT_DEVICE(XR17C152, UART_2_485, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_485, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8_485, pbn_connect), IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn), /* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */ EXAR_DEVICE(EXAR, EXAR_XR17C152, pbn_exar_XR17C15x), EXAR_DEVICE(EXAR, EXAR_XR17C154, pbn_exar_XR17C15x), EXAR_DEVICE(EXAR, EXAR_XR17C158, pbn_exar_XR17C15x), /* Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs */ EXAR_DEVICE(EXAR, EXAR_XR17V352, pbn_exar_XR17V35x), EXAR_DEVICE(EXAR, EXAR_XR17V354, pbn_exar_XR17V35x), EXAR_DEVICE(EXAR, EXAR_XR17V358, pbn_exar_XR17V35x), EXAR_DEVICE(EXAR, EXAR_XR17V4358, pbn_exar_XR17V4358), EXAR_DEVICE(EXAR, EXAR_XR17V8358, pbn_exar_XR17V8358), EXAR_DEVICE(COMMTECH, COMMTECH_4222PCIE, pbn_exar_XR17V35x), EXAR_DEVICE(COMMTECH, COMMTECH_4224PCIE, pbn_exar_XR17V35x), EXAR_DEVICE(COMMTECH, COMMTECH_4228PCIE, pbn_exar_XR17V35x), EXAR_DEVICE(COMMTECH, COMMTECH_4222PCI335, pbn_fastcom335_2), EXAR_DEVICE(COMMTECH, COMMTECH_4224PCI335, pbn_fastcom335_4), EXAR_DEVICE(COMMTECH, COMMTECH_2324PCI335, pbn_fastcom335_4), EXAR_DEVICE(COMMTECH, COMMTECH_2328PCI335, pbn_fastcom335_8), { 0, } }; MODULE_DEVICE_TABLE(pci, exar_pci_tbl); static struct pci_driver exar_pci_driver = { .name = "exar_serial", .probe = exar_pci_probe, .remove = exar_pci_remove, .driver = { .pm = &exar_pci_pm, }, .id_table = exar_pci_tbl, }; module_pci_driver(exar_pci_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Exar Serial Driver"); MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1